Unit Garage tubular steel luggage rack with pillion grab handles and sheared aluminum plate.The frame is also 2mm thick stainless steel tube. A practical carrier for anyone who needs to carry a bit more luggage. Mounting the carrier is very quick and easy.Fits together with the Unit Garage side bag carriers as well as those from the BMW original accessories. The manufacturer specifies a maximum weight load of 10kg. On request, we can supply the carrier together with an aluminum top case (please contact us for this).

A pair of rubber knee pads for the tank of your BMW R12 from Unit Garage. The pads are supplied with a strong adhesive on the back. This means they can be easily attached to the tank of your R12. On the one hand, they round off the look of the tank (create a nice contrast) and on the other hand, they protect the tank from scratches.

This high-quality license plate holder replaces the ugly original plastic holder on your BMW R nineT.The holder is made partly from steel (the frame) & partly from aluminum (the license plate). The parts are powder-coated black as a finish. This holder is ideal for anyone who wants to keep their original rear light and leave the pillion subframe on the motorcycle. This is because the tubes of the license plate holder perfectly continue the line of the rear pillion frame. In addition, the original rear light and the original indicators can simply be reused. Alternatively, small accessory indicators can also be fitted (we recommend ordering our blinker adapters for optimum installation.) See accessories in this product description).It is also possible to remove the original rear light and equip the motorcycle with 3-1 rear light/indicator combinations. To do this, simply do not fit the supplied license plate and screw the license plate directly to the holder.

Front plate number plate for your BMW R nineT. This plate gives your R nineT a retro racer look as we know it from the past. The plastic plate (optionally in black or white) sits classically above the windshield. The scope of delivery includes the black powder-coated steel mounting frame and the necessary mounting material. A navigation system or cell phone holder can also be attached to the mounting frame. The stickers shown in the product images are not included in the scope of delivery, these can be ordered separately.

Unit Garage High 2-1 exhaust system for BMW R12 models.The exhaust system simply fits plug & play onto the original exhaust bracket of your BMW. The 2-1 exhaust from Unit Garage in Italy is probably the most radical exhaust for the BMW R12 series. The short, top-mounted rear silencer in GP style ensures a really free rear end. So short that the rear area remains beautifully free and visible and so high that the beautiful rim of the R12 really comes into its own. We have been fitting & selling the identical exhaust system for the predecessor model R nineT for many years. Visually and qualitatively an absolute highlight. And all with E-number (road approval). We can also issue a special certificate for Swiss customers (please contact us for this). The exhausts from Unit Garage are very well made and also sound more than awesome, which you wouldn't think at first glance with such a small silencer. But they really do! Really nice and throaty, muffled bass. The rear silencers are supplied with removable DB killers.If you want even more sound, we recommend the Unit Garage titanium manifold without KAT. As the R12 models are equipped with a very large catalytic converter ex works, which also swallows a lot of noise, the motorcycle cannot get much louder without a different rear silencer. The exhaust system is available in either stainless steel or titanium. With the titanium version, the beautiful weld seams, which tarnish slightly due to the heat, remain visible. The titanium version is also somewhat lighter. Due to its design, the exhaust system is very light and results in a weight saving of stainless steel: 1.15 kg / titanium: 1.65 kg. Installation is very simple and can be completed in a short time.   The exhaust system can also be supplied with a black ceramic coating on request.

Unit Garage 2-1 exhaust system for BMW R12 models.The exhaust system simply fits plug & play on the original exhaust bracket of your BMW. The bottom-mounted exhaust from Unit Garage in Italy is a very special exhaust. Because no other silencer is so short! A GP look as it is written in the book.And the whole thing comes with an E number (road approval). We can also issue an extra certificate for Swiss customers.We have been fitting and selling the identical exhaust system for the predecessor model R nineT for many years. Visually and qualitatively an absolute highlight. And all with E-number (road approval). We can also issue a special certificate for Swiss customers (please contact us for this). The exhausts from Unit Garage are very well made and also sound more than awesome, which you wouldn't think at first glance with such a small silencer. But they really do! Really nice and throaty, muffled bass. The rear silencers are supplied with removable DB killers.If you want even more sound, we recommend the Unit Garage titanium manifold without KAT. As the R12 models are equipped with a very large catalytic converter ex works, which also swallows a lot of noise, the motorcycle cannot get much louder without a different rear silencer. The exhaust system is available in either stainless steel or titanium. With the titanium version, the beautiful weld seams, which tarnish slightly due to the heat, remain visible. The titanium version is also somewhat lighter. Due to its design, the exhaust system is very light and results in a weight saving of stainless steel: 1.95 kg / titanium: 2.2 kg. Installation is very simple and can be completed in a short time.   The exhaust system can also be supplied with a black ceramic coating on request.

Unit Garage 2-1 titanium silencer in very short Moto Gp style.The exhaust system simply fits plug & play on the original manifold of the R12. The exhaust can also be fitted without the original pillion footrests / exhaust bracket. The lower exhaust from the Italian company Unit Garage is a very special exhaust. Even shorter than the classic low exhaust from Unit Garage.And the whole thing comes with an E number (road approval). We can also issue an extra certificate for Swiss customers.We have been fitting and selling the identical exhaust system for the predecessor model R nineT for many years. Visually and qualitatively an absolute highlight. And all with E-number (road approval). We can also issue a special certificate for Swiss customers (please contact us for this). The exhausts from Unit Garage are very well made and also sound more than awesome, which you wouldn't think at first glance with such a small silencer. But they really do! Really nice and throaty, muffled bass. The rear silencers are supplied with removable DB killers.If you want even more sound, we recommend the Unit Garage titanium manifold without KAT. As the R12 models are equipped with a very large catalytic converter ex works, which also swallows a lot of noise, the motorcycle cannot get much louder without a different rear silencer. The exhaust system is available in either stainless steel or titanium. With the titanium version, the beautiful weld seams, which tarnish slightly due to the heat, remain visible. The titanium version is also somewhat lighter. Due to its design, the exhaust system is very light and results in a weight saving of 2.4kg Installation is very simple and can be completed in a short time.   The exhaust system can also be supplied with a black ceramic coating on request.

Unit Garage High 2-2 double silencer exhaust for BMW R12 models.The exhaust fits easily plug & play on the original exhaust bracket of your BMW. The bottom-mounted dual exhaust from the Italian company Unit Garage is a slim and beautifully short exhaust in the classic cafe racer look with two exhaust silencers.And the whole thing comes with an E number (road approval). We can also issue an extra certificate for Swiss customers. And the whole thing with E-number (road approval). We can also issue a special certificate for Swiss customers (please contact us for this). The exhaust systems from Unit Garage are very well made and also sound more than awesome, which you wouldn't think at first glance with such a small silencer. But they really do! Really nice and throaty, muffled bass. The rear silencers are supplied with removable DB killers.If you want even more sound, we recommend the Unit Garage titanium manifold without KAT. As the R12 models are equipped with a very large catalytic converter ex works, which also swallows a lot of noise, the motorcycle cannot get much louder without a different rear silencer. The exhaust system is available in either stainless steel or titanium.With the titanium version, the beautiful weld seams, which tarnish slightly due to the heat, remain visible. The titanium version is also somewhat lighter. Due to its design, the exhaust system is very light and results in a weight saving of stainless steel: 1 kg / titanium: 1.3 kg. Installation is very simple and can be completed in a short time.   On request, the exhaust system can also be supplied with a black ceramic coating.

Handmade manifold made of titanium WITHOUT CATALYST, suitable for BMW R12. Just the thing for anyone who wants to give their R12 a little more power and, above all, a throatier and louder sound. By eliminating the huge original catalytic converter, the engine gets a little more power and sounds much throatier.In addition, the manifold weighs 4.1 kg less than the original. The manifold also looks good. The ugly chrome of the original manifold has disappeared. In the titanium version, the manifold has very nice, visible weld seams and turns a little blue in some places over time (see pictures).

Probably the best and most effective cleaner for stainless steel surfaces (e.g. exhaust manifolds & rear silencers). This cleaner really works wonders! We tested it ourselves in our workshop and could hardly believe how well and quickly the cleaner works (ideal for making manifolds and exhausts look like new again).After a few years, every beautiful stainless steel manifold that was once matt silver or polished no longer looks silver, but yellow.Simply spray such a manifold with the cleaner, wait 2-3 minutes and rinse with water. As if by magic, the manifold will look almost like new again, without grinding / rubbing or similar. Tip:For safety reasons, we recommend covering other parts of the motorcycle or removing the part to be cleaned.

320 Japanese plug set for connecting lighting equipment (e.g. indicators on motorcycles).Many accessory indicators (e.g. all Kellermann / Motogadget) have open cable ends. You can order this universal set to connect these easily with cable sets. The set consists of 3.5mm Japen plug-in sleeves.- Plug + rubber sleeves- Single female plug + rubber sleeves- Double plug + rubber sleeves Attention, there are also 3 & 4mm plugs on the market. To connect these to the 3.5mm plugs, simply widen or compress the 3.5 slightly.

Skyrich lithium-ion power battery with extra power. For the weight fetishists among motorcyclists.The power battery has more vapor than the original battery and starts your bike more reliably. Even if the cylinder is in a bad position (e.g. TDC) and the normal battery would not be able to turn the engine, the Power battery will not let you down. The battery also has more capacity. ATTENTION: Due to shipping regulations, we are only allowed to deliver batteries to certain countries (see list of countries at the end of the description). We do not ship batteries to all other countries. The battery weighs just approx. 1.5 kg. This saves between 2 - 4 kg depending on the battery installed. There is no easier way to save weight on your machine. Attention for air-cooled Triumph AC models built 2008-2009: These models have a different battery box and need a different battery (you can find these in the accessories articles in this description). You can recognize this by the fact that your battery has the designation YT12BS (WITHOUT X). 12 V maintenance-free lithium-ion battery, capacity 6 Ah, energy 72 Wh, dimensions in mm 150 x 87 x 105 Charging current recommended 2 amps, maximum charging current for fast charging 20 amps.Very cost-intensive, but LIGHT! We only supply the very latest technology.The battery is supplied pre-charged. With charge status indicator (simply press the button on top of the battery and the integrated LEDs will show you the current charge status).Another major advantage of lithium batteries is their extremely low self-discharge rate (maximum 5% per month). Our experience has shown that it is even lower. We recommend ordering our charger if you do not already have one that is lithium-ion capable. Countries we ship to: GermanyBelgiumDenmarkIrelandFrance, GermanyLuxembourgNetherlandsNorwayAustriaPolandPortugalRomaniaSwitzerlandSwedenSloveniaSlovakiaSpainHungary   Specific information on the lithium-ion battery:   Lithium-ion battery with overvoltage protection from Skyrich Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati. The Power Sports lithium-ion batteries in the LTM line are characterized by a heat-resistant, waterproof nylon housing and improved terminal connections Overcharge Protection (OP) The Skyrich battery has an extended battery management system (BMS) which, in addition to the balancers (ensures even charging/discharging of the battery), also includes overvoltage protection. This prevents the battery from being charged with a voltage of over 14.9V. Spacer (S) The battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip so that the battery fits exactly into the battery box. Waterproof (WP) The battery is completely waterproof and will not be damaged if the motorcycle is cleaned under high pressure. Indicator (I) All batteries are equipped with an improved state of charge indicator, which shows the battery's state of charge even more precisely. Replacing a standard lead-acid battery with a Skyrich lithium-ion battery can save up to 5 kg in weight without significant effort. The following advantages speak for Skyrich lithium-ion batteries: - Integrated overvoltage protection- approx. 1/3 of the weight of the comparable lead-acid battery- improved pole connections made of brass for best conductivity- waterproof- Completely black battery housing- battery housing made of nylon, therefore deformation due to heat is practically impossible- unbeatable cost/weight saving ratio- can be installed in any position as it contains no acid- Contains no heavy metals- Balanced discharge/charge of all cells through balancer- Fast charging with high charging current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- good performance even at high temperatures up to 60°C

Determine for yourself what the exhaust flap does and how the exhaust sounds. You can choose between 3 levels using the switch.1. exhaust flap permanently closed2. exhaust flap works as in standard condition3. exhaust flap permanently open   The exhaust flap closes and opens depending on the engine speed and throttle position in the standard state. This has an influence on the sound and draft.With the flap open, the sound is audibly more powerful, with the flap closed, it is quieter. The engine revs up a little more willingly and with more bite when the flap is open.The loud cold start of the EU5 model can be significantly reduced with the flap closed, which even pleases the neighbors. Also very interesting for the guys with louder exhaust systems who come into an inspection... with the flap closed, even a loud exhaust becomes rather quiet.   Easy to fit, suitable for all BMW R nineT models. Mounting material included. Illustrated installation instructions are included!The small control unit is simply inserted between the actuator of the exhaust flap. Plug&Play without cutting cables, soldering, crimping or similar. The switch can be simply screwed onto the handlebar area using the mounting plate supplied or stowed away individually.   Not approved for road traffic.

Elegant CNC-milled aluminum washer from the premium manufacturer Rizoma from Italy. The washer replaces the original exhaust screw on your nineT.

CNC-milled aluminum crash pads from Rizoma. Unfortunately, crashing your motorcycle is always an unpleasant topic. In the event of a crash, the fork and swingarm of the motorcycle are always the first to come into contact with the asphalt. To protect the fork in the event of a fall, we recommend fitting crash pads to the fork legs. As crash pads often do not look attractive, Rizoma offers the solution here. The Rizoma crash pad is so elegantly finished that it even enhances the appearance of the R12.

Rizoma Namic mirror with E-number. Probably the highest quality and most elegant mirrors in our range. The mirror is made from very high-quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milled structure. You can see and feel the high quality of these mirrors at first glance. Thanks to the ingenious mounting system that Rizoma uses here, the mirror does not protrude so far upwards and look like mouse ears. It runs nice and flat over the handlebars. The shape is a beautifully classic teardrop shape. The mirrors are sold individually. Model specific mounting instructions: An additional adapter is required for all models. BMW motorcycles:The Riz mirror adapter RadialRS + Dynamic BMW is required for mounting on the original mount of BMW models (see accessories in this article). Water-cooled Triumph LC models: An additional, model-specific adapter is required to mount the mirror (see accessories article in this description). 1. adapter "Riz mirror adapter for fittings with hole", which is suitable for all models that have a hole in the fitting ex works for the mirror mount 2. adapter "Riz mirror adapter for fittings with thread", which is suitable for all models that have a thread for mirror mounting on their fittings ex worksThruxton 1200 R / RS - Speed Twin 1200 - Scrambler 1200: These models do not have a mirror mount ex works. In addition to the adapter 2, the adapter mirror adapter "Thruxton R / Speed Twin / Scrambler" is also required Air-cooled Triumph AC models: The "Riz mirror adapter for fittings with hole" adapter is required for all AC models.

Unit Garage Motorschutz Bügel für alle BMW R9T Modelle ab BJ 2017 (Euro 4) sowie R12 Modelle (bitte in der Auswahl wählen). Die Heavy Duty Bügel sind etwas massiver als die meisten anderen Bügel. Durch eine zweite Strebe wird der Zylinderkopf noch mehr abgedeckt. Das bietet noch besseren Schutz und wirkt optisch noch etwas martialischer.Die Bügel werden aus 25mm Rohren hergestellt und schwarz Pulver beschichtet. Sie sehen also aus wie der Rahmen der R nineT.  Besonders praktisch bei den Heavy Duty Bügel ist, dass sie für die meisten Servicearbeiten nicht demontiert werden müssen. Außerdem müssen zur Montage der Bügel nicht die Schrauben, die den Motor halten gelöst werden (was bei vielen anderen Herstellern so gelöst wurde, dass diese Schrauben gelöst werden müssen).  Alle Montagematerialien sowie eine Montageanleitung sind im Lieferumfang enthalten.

Unit Garage side bag bracket for all BMW R12 models. Compatible with our rear LED strip.The Unit Garage bag holder is needed to mount a Unit Garage side bag. All Unit Garage side bags from our range fit on the holder. The UG bag holders are made in a beautifully minimalist way so that they are as unobtrusive as possible when the bag is not mounted on the motorbike.The Unit Garage bag system is a very well thought out one. The side bags are simply hooked into and unhooked from the holder with a flick of the wrist. In addition, a lock is integrated in all bags to protect them from theft when mounted. The bag holder is available in 3 versions: 1. single holder: holder for one bag on the right-hand side.2. double holder exhaust below: Holder for two bags, for all R nineT's that have a bottom-mounted exhaust.3. double holder exhaust on top: Bracket for two bags, for all R nineT's with an overhead exhaust. Included in delivery are all fixing materials necessary for mounting.

Unit Garage aluminum underride guard suitable for BMW R12 models. The underride guard is made of 3 mm thick aluminum and protects the motorcycle from stone chipping and contact when riding off-road. The stone guard is also an advantage when riding on the road. The use of 3 mm aluminum ensures good protection with low weight. The protection also gives the R12 a more solid appearance. The Unit Garage guard is designed to also cover the manifold and the catalytic converter. Everything needed for installation is included in the scope of delivery.

The Beeline Moto Navigation System II is the smallest and smartest motorcycle navigation system available in the world.The new Beeline 2 is even more innovative, has more options, an improved display and an improved route display like the first series. In addition, the new system has glove-friendly buttons that are easy to operate even while driving.Visually, the Beeline sat nav is basically just a small black button that can be attached to and removed from the motorcycle in a matter of seconds. Navigation with this navigation system works via an arrow and km indicators on the Beeline display. The special feature of this navigation system is that it has two different navigation modes: 1. classic precise navigation, in which an exact route is determined. Here the navigation system gives you an exact route with turn-offs, kilometers etc. 2. directional navigation in which the navigation device only gives you one direction. In this mode, the Beeline acts more or less like a compass. You give the navigation device a destination and it only shows you one direction to drive in via the arrow. In my opinion, this is a very cool way of navigating for motorcycles. Because with a motorcycle, the journey is usually the destination and the rider can decide their own route and keep their nose to the wind as they please. The routes are set using a smart phone and the appropriate Beeline navigation app. Be sure to watch the video at the end of the description to get to know all the functions of the Beeline Navi! Another very good thing about the navigation device is the long battery life of 14 hours.It is also possible to order an additional charging adapter so that the navigation device can be charged on the motorcycle and used indefinitely (see accessories in this description) A mounting system is included in the scope of delivery (the Strap Mount System. You can also find the article under the accessories in this description if you want to read more about how these mounts work).3 other mounting options are also available (these can also be found under accessories in this description).   Versions: In the black version, the case is made of plastic. In the silver & gunmetal version, the case is made of metal. Included in delivery: 1 BEELINE Moto 2 navigation device 1 "Universal strap mount" navigation holder1 USB charging cableFits all motorcycles and scootersWaterproof and shockproofTwo navigation modesFour buttons (glove-friendly)Diameter of the active area: 30 mmWorldwide coverage (Google Maps)Record & share ridesStrava integration & GPX importAutomatic backlight for night ridesLifetime app and firmware updatesApp supports the following languages: English, German, French and JapanesePhone requirements: iPhone - iOS 9.2 and aboveAndroid phone with Google Play - 8.0 Oreo and aboveBluetooth 4.0 capability required Battery Capacity: 600mAhBattery operating time: 14 hours in operationMicro USB chargingDisplay Technology: Ultra-bright IPS TFT display with anti-reflective and hydrophobic coatingSize: 36.8mm (1.45") screen diagonal, 10cm total areaResolution: 412x412 (402ppi)Navigation Intelligent turn-by-turn navigation with estimated time of arrival and speed information.Classic arrow display in route and compass mode.Turn-by-turn directions: Warning LED and signal tone (spoken warnings via the app - currently only via BeelinePlus) Additional functions Speed limit display (depending on location)Record and share journeysGPX route import/exportSupports 8 languagesFun and fast route planning (depending on location)

The Beeline Moto Bar Mount Kit allows you to mount the Beeline Moto 2 Navigation System on dervers handlebars with different diameters. Fits motorcycle handlebars with 22mm, 25mm or 32mm diameter. Rubber washers included Adjustable head for optimal view of the navigation device

The Beeline Moto RAM Ball Mount Kit allows the attachment of the Beeline Moto navigation system to the common RAM ball systems, as they use many Navigtionssysteme (TomTom or SW.Motech fastening system eg). Fits RAM ball clamp with 1 inch diameter.

The Beeline Moto Mirror Mount Kit allows you to mount the Beeline Moto 2 Navigation System to a mirror arm. Fits rear view mirror rods with 10-16mm diameter. Adjustable for optimal angle Clamp with rubber to prevent scratches

Practical case to store the Beeline Moto 2 Navi when it is not on the bike. Made of ethylene vinyl acetate copolymer Soft inner lining Lid can be opened by horizontal zipper (all around) With power supply inside, for secure hold of Beeline Moto and charging cable Carabiner hook for attaching to belt, bag, etc.

Endless power! With this insert, any compatible mount* can be converted so that the Moto II can be easily charged while riding. Easy installationDirect connection to the 12V battery terminalsAdjustable orientation with top or bottom cable outletWeatherproof, sealed construction with replaceable contact pinsAutomatic power switching to avoid dead batteries*Not compatible with universal mount Included in delivery Powered mount insertExtended bolts for mounting2m 12V battery connection cable2x cable ties Notes With this Powered Mount insert, the Moto II device can be charged while riding. It is designed to be connected to the motorcycle battery with ring terminals in the same way that other accessories are connected to motorcycles, e.g. heated grips. The design allows all mounts (except the universal mount) to be adapted to power the device. To install, the original mount insert must be removed from the bracket, then the Powered Mount insert is fitted in its place. The Powered Mount insert is supplied with three different screws that can be used to attach it to the different brackets. The insert uses pogo pins to charge the device via contacts on the underside. The design is made to avoid corrosion problems that can often occur with this type of charging mount for navigation devices. Corrosion can occur if the mount is left outside in bad weather for long periods of time. The Powered Mount insert can be installed so that the cable exits from either the top or bottom. A rectifier chip in the device allows both contacts to accept positive or negative charge.

The SW-MOTECH engine guard offers additional protection against stone chipping and unwanted contact with the ground and gives the R12 a more solid look. The 4 millimeter thick engine guard can be easily fitted to the original mounting points without drilling or welding using the custom-made steel attachment parts supplied. Additional protection for the engine against stone chipping and ground contact: Made from a high-quality aluminum alloy, the engine guard shows off its full capabilities off the road, but also gives road motorcycles greater safety and an individual look. State-of-the-art manufacturing processes give the model-specific mudguards a secure fit without compromising ground clearance. The attachment to frame mounting points provides additional stability and enables easy installation. Rubber-damped suspension Good ventilation thanks to all-round ventilation openings Installation without drilling and welding Stable and easy installation at the original mounting points, no modifications to the motorcycle required Model-specific development for optimum fit Mounting material included in the scope of delivery Robust design made from high-quality aluminum alloy

SW-Motech SLC side carrier for BMW R12 models (the holder does not fit on the Cruiser in combination with the short BMW rear). The precise, model-specific development of the SLC side rails allows simple and safe mounting at original mounting points on the vehicle. The Legend Gear LC1/LC2 side pockets can be attached and removed within seconds using a quick-release system or in just a few simple steps, without the driver having to do without a reliable bag attachment. Also very suitable for a variety of pockets which you can then simply screw on the 3 fixing points.    The SLC side rail, individually designed for the BMW R nineT Classic, Urban, Pure, Racer & Scrambler, blends in perfectly with its appearance    Model-specific shape allows easy mounting on one or two sides.    Material: steel tubeadvice    The SLC side rail is also compatible with the universal side bracket for fixing all kinds of things.scope of supply    SLC side rail left    installation material

The Remus stainless steel exhaust system for the R12 nineT is here. And this time, fortunately, again in the popular stealth design that was previously available for the R nineT. As you would expect from Remus, the exhaust has a very high quality finish and a very good fit. The conversion of the slip-on exhaust is very quick and easy. Visually, the exhaust gives the nineT a tidier rear area and, above all, the view of the beautiful rim is improved. The Remus Stealth exhaust doesn't have to hide in terms of sound either. The Remus sounds significantly duller and somewhat throatier than the original. Power: + 3.1 HPTorque: + 3.2 NMWeight: - 1.28 kg   Listen to the sound! Here you can listen to the sound of the Remus exhaust (at the end the sound of the original exhaust is also shown for comparison)

SW-MOTECH Engine Guard BMW R12 Cruiser / nineT The robust stainless steel bracket protects the engine and components from fall damage and scratches. A resilient frame connection ensures high stability, while the high-quality crash bar blends seamlessly into the design of the motorcycle. The use of blasted and electropolished stainless steel offers the advantage over coated steel that damage to the crash bar cannot lead to a loss of corrosion resistance. Reliable protection of critical componentsLoadable frame connectionBlack powder coatedMatching the appearance of the motorcycleScope of delivery: 2 safety guardsmounting materialmounting instructions

This short license plate holder made of aluminum embellishes the rear of your nineT skilfully and with little effort.The license plate holder is supplied as a plug & play solution including a small LED license plate light & matching vehicle plug. The license plate light is already pre-assembled and pre-wired. The license plate holder only needs to be screwed on and plugged into the vehicle plug, ready. Assembly time approx. 15 minutes and easy for anyone to do themselves. We found the original plastic license plate holder too cheap. We were also annoyed by the very large / long license plate light and the huge reflector. Due to the large reflector at the top, the license plate sits very low with the original holder, which doesn't make the view from behind any more attractive. Our Classicbike-Raisch license plate holder is made from aluminium in Germany and then powder-coated in black. All parts are assembled and wired in-house. Classicbike-Raisch tip: - If you want to be 100% legal on the road, you unfortunately have to ride a reflector. You can find a much narrower reflector than the original one under accessories in this product description.- We also recommend ordering a set of license plate screws to attach the license plate.

The new Cayo cell phone holder system from Motogadget made in Germany.In our opinion, the Cayo system is the best, most sophisticated and easiest to use cell phone holder & charging system available on the market. In contrast to most other manufacturers, you don't have to choose between numerous adapters / accessories etc. With the moto.dokk comes a perfect handlebar mount that integrates everything you really need. Handlebar mount / inductive charging / anti-vibration system - The system comes with various adapter rings that allow the mount to be fitted to any handlebar. - A cable for connection to a USB-A socket is included (most modern motorcycles have such a socket). This allows the cell phone to be charged inductively via the holder. If you do not have a USB-A socket, you can order the "battery.dokk" to charge your cell phone via the holder (see accessories in this description).- An anti-vibration plate (to prevent damage to the cell phone / camera) and an inductive charging function are integrated in the holder.   1-click holder / cell phone case We have tested the holder ourselves on some of our motorcycles and it works perfectly! The cell phone sits firmly in place with a flick of the wrist (no annoying turning / getting stuck or similar). The cell phone can be mounted in either portrait or landscape format. You have 2 options for attaching the cell phone to the holder:1. you order the stylish and very flat Cayo cell phone case "phone.dokk" (see accessories in this product description).2. you order the "uni.dokk" adhesive pad, which can be universally attached to any cell phone (see accessories in this product description). Classicbike-Raisch tip For very good and motorcycle-friendly navigation, we recommend the Calimoto app.   Summary: The full-featured mounting system. Attaches your smartphone quickly and securely to any motorcycle. Choose a suitable case or universal pad. Direct connection to the vehicle battery is possible with our battery.dokk. Integrated vibration decoupling Integrated inductive charging smartphone docking in portrait & landscape formatSuitable for all handlebar diametersOur moto.dokk is a mounting system for quickly and securely attaching your smartphone to your vehicle. The extremely compact housing integrates inconspicuously into the vehicle and combines inductive charging and vibration decoupling. - The scope of delivery includes a connection cable for a USB-A socket on the vehicle. When using an existing USB port on the vehicle, this must be switched on and off with the ignition. Proper functioning of inductive charging is guaranteed with our CAYO phone.dokk cases, provided the phone supports inductive charging. - When using a CAYO uni.dokk pad, inductive charging may be limited or not possible. - If there is no USB port on the vehicle, we recommend our CAYO battery.dokk for direct connection of the moto.dokk to the 12V vehicle battery. Suitable for all standard handlebar diameters and Fatbars:- 22.2mm (7/8")- 25.4mm (1")- 28.6mm (1 1/8")- 31.8mm (1 1/4")- 35.0mm (1 3/8")  

The new Cayo cell phone holder system from Motogadget, made in Germany.In our opinion, the Cayo system is the best, most sophisticated and easiest to use cell phone holder system on the market. The simple / inexpensive mount for short tours - The bike.dokk mount is a simple cell phone holder with which you can attach your cell phone to the handlebars of your motorcycle. Various adapter rings are included in the scope of delivery, which enable mounting on all common motorcycle/bicycle handlebars.- We recommend this mount to all customers who only need the mount occasionally for short trips. We recommend the "moto.dokk", which is equipped with a charging function and an anti-vibration system to protect the cell phone camera, for those who regularly have their cell phone on the motorcycle for longer periods of time. 1-Click holder / cell phone case We have tested the holder ourselves on some of our motorcycles and it works perfectly! The cell phone sits firmly in place with just one click (no annoying turning / getting stuck or similar). The cell phone can be mounted in either portrait or landscape format. You have 2 options for attaching the cell phone to the holder:1. you order the stylish and very flat Cayo phone case "phone.dokk" (see accessories in this product description).2. you order the "uni.dokk" adhesive pad, which can be universally attached to any cell phone (see accessories in this product description). Classicbike-Raisch tip For very good and motorcycle-friendly navigation, we recommend the Calimoto app.   Summary The quick and secure mounting system for your smartphone. Suitable for bicycles and motorcycles. Select suitable cover or universal pad separately. Very small & compact on the handlebarsQuick & secure attachmentPortrait & landscape format without conversionSuitable for all common handlebar diameters and Fatbars: - 22.2mm (7/8")- 25.4mm (1")- 28.6mm (1 1/8")- 31.8mm (1 1/4")- 35.0mm (1 3/8")  

With the Cayo phone.dokk, the cell phone can be attached to all Cayo holders with a flick of the wrist. The case has an elegant and very flat design to not only be practical but also look good. The surface of the case consists of a very pleasant soft-touch surface. As a small but not unimportant side effect, the case also protects your cell phone from damage if it falls out of your hand. An extra strong magnet is integrated into the case, allowing you to attach your phone to all magnetic mounts.

With the Cayo uni.dokk, you can attach your cell phone to all Cayo holders in one easy step. Don't fancy an extra cell phone case? Or do you already have one that you want to keep using? No problem! The uni.dokk is a strong adhesive pad that sticks to all surfaces.

The smart power adapter for connecting the moto.dokk directly to the vehicle battery via USB-C plug. Quick and easy to connect directly to the battery terminals  switches off when not in use, no battery discharge  no time-consuming search for ignition plus for the connection

A really nice, classic tank bag made from canvas/sailcloth. Quality / Fastening / 2-1 tank bag & backpack This VERY high-quality tank bag focuses on the essentials for a tank bag paired with a very nice design. The tank bag is attached to the motorcycle in the classic way with 2 straps, guaranteeing a very secure and firm hold. The straps are fitted with a cover that makes it possible to conceal the metal straps.When removed from the motorcycle, the tank bag can also be used as a normal rucksack, which is particularly practical on tours or short trips. This gives you the option of not leaving your valuable belongings on the motorcycle when you are away from it. Water-repellent / care The backpack is made of thick / very high-quality canvas fabric. The fabric is lightly waxed and therefore slightly water-repellent (not waterproof). This can be reinforced with a waterproofing spray. Suitable waterproofing spray and wax (to care for the bag so that you can enjoy it for a long time) can be found under accessories in this product description. Storage space The tank bag has two pockets that are accessible from the outside and can be opened with a high-quality metal zipper. There is also a small additional pocket on the side where you can stow things that you need to have to hand quickly (e.g. sunglasses / cash etc.).Inside the main compartment there is a separate compartment that offers space for documents or a laptop (up to 15"), for example. Dimensions Dimensions: Length 42cm, width 31cm, height 14cmVolume: 23 litersWeight: 2.15kg

A really beautiful, classic tank bag made from genuine suede Quality / Fastening / 2-1 tank bag & backpack This VERY high-quality tank bag focuses on the essentials for a tank bag paired with a very beautiful design. The tank bag is attached to the motorcycle in the classic way with 2 straps, guaranteeing a very secure and firm hold. The straps are fitted with a cover that makes it possible to conceal the metal straps.When removed from the motorcycle, the tank bag can also be used as a normal rucksack, which is particularly practical on tours or short trips. This gives you the option of not leaving your valuable belongings on the motorcycle when you are away from it. Water-repellent / care The backpack is made of thick / very high-quality canvas fabric. The fabric is lightly waxed and therefore slightly water-repellent (not waterproof). This can be reinforced with a waterproofing spray. Suitable waterproofing spray and wax (to care for the bag so that you can enjoy it for a long time) can be found under accessories in this product description. Material The Unit Garage tank bag (handmade in Italy) is made from 3mm thick, extremely high-quality genuine leather. The high-quality material guarantees that the backpack will last a lifetime if cared for properly. Storage space The tank bag has two pockets that are accessible from the outside and can be opened with a high-quality metal zipper. There is also a small additional pocket on the side where you can stow things that you need to have to hand quickly (e.g. sunglasses / cash etc.).Inside the main compartment there is a separate compartment that offers space for documents or a laptop (up to 15"), for example. Dimensions Dimensions: Length 42cm, width 31cm, height 14cmVolume: 23 litersWeight: 2.15kg

This BMW tank emblem milled from aluminum is just the thing for all BMW drivers who like it black and beautifully simple! The subtly suggested BMW propeller and the finely milled BMW lettering look very elegant. Attention!The emblems are sold individually The original emblems on the tank are glued on and can be carefully removed.The new black emblems have double-sided adhesive on the back and can therefore be easily attached to the motorcycle. Classicbike-Raisch tip: We also offer matching brake/clutch reservoir covers in "The Line" design. These can be found under accessories for this product.   The emblems are available separately. Diameter tank emblem: 70mm

New from MotoIsm - the two-piece fork covers with integrated indicators. These innovative fork covers are very quick & easy to fit. Thanks to the two-part design of the covers, they can simply be slipped around the fork and fixed in place with the supplied cable ties (which are on the inside and not visible). The fork does not have to be removed, it couldn't be easier. The covers can be fitted in no time at all. LED SMD indicators with E-number are integrated in the covers. This kills two birds with one stone (inconspicuously mounted indicators that are still clearly visible from the front and a more attractive fork). The covers from MotoIsm (Made in Germany) are manufactured from high-quality, carbon fiber-reinforced plastic using a 3D printing process. MotoIsm produces the highest quality 3D-printed parts on the motorcycle market. The surface has a very nice & smooth feel. The matching blinker plugs including the matching resistors can be ordered directly: Matching blinker plugs with integrated resistors are available for the Motoism indicators. These guarantee a problem-free connection (simply plug the connector into the original wiring harness) and a suitable flashing frequency. These plugs can be found under accessories in this product description.   No disassembly of the fork or upper triple clamp necessary Innovative, two-part SEAMLESS design  Ultra-bright thanks to LED technology - 5 SMDs With E-mark - Street legal Cable routing inside the cover Separating joint invisible from the side and front Special cable ties with particularly flat design are guided in the component High-quality paint finish in matt black Headlight brackets can be easily fitted to the covers

New from MotoIsm - the two-piece fork covers.These innovative fork covers are very quick & easy to fit. Thanks to the two-part design of the covers, they can simply be slipped around the fork and fixed in place with the supplied cable ties (which are on the inside and not visible). The fork does not have to be removed, it couldn't be easier. The covers can be fitted in no time at all. The covers from MotoIsm (Made in Germany) are manufactured from high-quality, carbon fiber-reinforced plastic using a 3D printing process. MotoIsm produces the highest quality 3D-printed parts on the motorcycle market. The surface has a very nice & smooth feel.   No disassembly of the fork or upper triple clamp necessary Innovative, two-piece SEAMLESS design  Cable routing inside the cover Separating joint invisible from the side and front Special cable ties with a particularly flat design are routed inside the component High-quality paint finish in matt black Headlight brackets can be easily fitted to the covers   Attention only fits on the Urban GS if the original lamp cover has been removed.

Handmade manifold WITHOUT CATALYST, suitable for all BMW R nineT models. Available in titanium or stainless steel. Just the thing for all those who want to give their nineT a little more power and, above all, a cooler and louder sound. By eliminating the catalytic converter, the machine gets a little more power and sounds significantly throatier. The manifold also looks good. The ugly chrome of the original manifold is gone. In the stainless steel version, the manifold is matt silver. In the titanium version, the manifold has very nice, visible weld seams and turns blue in some places over time (see pictures).

The Line BMW expansion tank covers by Classicbike-Raisch.A pair of CNC milled aluminum reservoir covers for BMW motorcycles. The covers are manufactured in Germany using a 3D milling process. Afterwards they are glass bead blasted and black anodized. This results in an incredibly high-quality, rough / matt surface that also perfectly matches the original fittings of the R9T models.The pictures speak louder than words. After anodizing, the covers are milled again to highlight the Bmw and nineT lettering in silver. The Line design is deliberately a very inconspicuous and simple design, because many people also like it inconspicuous. Sometimes less is more. The reservoir covers are simply replaced with the original ones, which can be done in just a few minutes. Classicbike-Raisch tip:You will find black screws among the accessories in this product description. These are much less noticeable and make the covers look even more elegant.

The Navigator tank bag is a practical small backpack for short trips.The tank bag combines a practical cell phone compartment (with transparent film to use the cell phone for navigation) with a small, practical pocket in which you can store the essentials for a day trip (wallet/keys etc.). The navigator is held to the tank with 6 strong magnets, so there is no need to attach it (just the thing for a bag that you spontaneously take with you for a short trip). The bag is made of heavy canvas combined with leather: Waterproof zippers and heavily waxed materials ensure that the bag can withstand a downpour without getting wet on the inside (it probably can't withstand constant rain). Dimensions of the bag: 22 x 12.5 x 7.5 cm (large enough for an iPhone Max). In addition to being used as a tank bag, the bag can also be used as a belt bag or shoulder bag (with the supplied strap).This is very practical if you want to take your valuables with you when you are away from the bike for a while on tour.

CNC-milled aluminum replacement pegs for your BMW R nineT / R12.The footrests are supplied as a complete set including mounts. The high-quality Gilles footrests look really classy and are exactly the right size. Not too big to look good, and not too small so that you have the necessary grip on the footrests.The footrests can be used with or without the rubber inserts supplied. Adjustable footrests - change your knee angle:Vario joints are also available as an option for the Gilles footrests. This allows you to mount the footrests offset by either 30 or 40 mm through 360°.You can find the Vario adapters under the accessory products in this description.

Batterieüberbrückungskabel in dünner Ausführung. Diese Kabel sind mehr als ausreichend, um ein Fahrzeug, insbesondere ein Motorrad, zu überbrücken.Die dünnen Kabel mit den kleinen Klemmen sind wesentlich praktischer als die dicken, unhandlichen Kabel, die man kaum an die Batterieklemmen bekommt, wie man sie von Autos kennt. Länge: 1,6 m  

Classicbike-Raisch LED headlight kit with cornering light & daytime running light suitable for all R nineT models that have a classic H4 headlight ex works. Visually and technically superior to the original headlight insert. The headlight turns night into day, you can see the road properly and others can also see you properly.   Kit / assembly:The kit contains everything you need to install the LED headlight insert in the original headlight housing and connect the electrics plug & play WITHOUT any electronic errors in the speedometer. To ensure that there are no error messages, the scope of delivery includes suitable CanBus resistors for the parking light and the main headlight (these both fit into the headlight housing). We also supply illustrated step-by-step installation instructions so that the LED headlight can be easily installed by anyone. Installation takes approx. 15-20 minutes (no soldering required, everything is plugged in).   Functionality:Who hasn't experienced the classic H4 headlights, absolutely inadequate road illumination when driving in the dark. This no longer happens with the LED insert. The light from the headlamp is extremely bright. In addition, the headlight automatically detects when the motorcycle is leaning and then also turns on the outer LEDs to illuminate the bend even better, which ensures even more safety. Optics:The headlight insert also looks great. The clear glass and clean design make the R nineT look a little more elegant and modern from the front. The black insert in particular makes the headlight look very inconspicuously elegant. Daytime running light:When the R nineT is started, only the beautiful daytime running light of the headlight is automatically illuminated. By pressing the headlight flasher (for longer than 1 second), the headlight switches to real low beam.

This small leather bag with zipper and retaining strap on the back is a small bag that can be attached in many places with its strap. It is primarily intended to be attached to the tank straps. However, it can also be used as an accessory bag for a rucksack or side pocket.

That's oldschool! Handlebar grips which are wrapped from genuine leather tape!That was otherwise only possible with a lot of manual work (and high costs) with a upholsterer.Now there is leather tape to wrap for everyone! The tape is equipped with 3M adhesive tape on the inside, so it simply sticks to the handlebar when winding. The tape is simply wrapped directly onto the handlebar & grass grip sleeve (if you don't want the grip so thick), or over the existing grip rubbers.The tape is pre-cut at the ends to fit, so that a nice winding pattern is easily added. We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar articles in this description).Here's a video on how to wrap the ribbon in the best possible way.

Black coated stainless steel screw set for the two expansion tanks (brake & clutch fluid caps) of your BMW. Like all BMW screws, the screws have a Torx head. The screws can be easily replaced individually screw by screw without fluid leaking (straighten motorcycle / reservoir).

Upgrade auf LED Scheinwerfer Birnen!  Dieses LED Umrüst Kit von Philips (bestehend aus LED Hauptscheinwerferbirne & LED Standlichtbirne), macht aus deinem einfachen H4 Scheinwerfer einen hell leuchtenden LED Scheinwerfer mit elegantem weißen Licht. Natürlich kann man hiervon nicht den gleichen Effekt erwarten wie von einem kompletten LED Scheinwerfer Einsatz. Aber du kannst deinen H4 Scheinwerfer für eine schmale Mark auf einen viel heller leuchtenden LED Scheinwerfer umrüsten und behältst dabei auch die klassische Optik (komplette LED Einsetze sind auch nicht jeder Manns Sache).Schau dir den Unterschied von den original Birnen zu den LED Birnen unter den Produktbildern an.Classicbike-Raisch Kit: Aufgrund des CanBus Systems das bei den BMW R nineT Motorrädern verbaut ist, kann man die Birnen nicht einfach gegen die originalen Austauschen, da sonst Fehlermeldungen im Tacho angezeigt werden.Um dieses Problem zu lösen, liefern wir hier ein gesamtes Kit bestehend aus:- LED Birne Hauptscheinwerfer- LED Birne Standlicht- CanBus Widerstand Hauptscheinwerfer- Widerstand Standlicht- 2x Strom Dieb- Einbauanleitung Die Birne wurde schon an einigen Motorrädern getestet und hat für diese auch eine Zulassung. Leider ist die R9T noch nicht mit auf der Liste. Es kommen aber regelmäßig von Phillips neue Modelle mit dazu. (siehe hier für die Auflistung der getesteten Motorräder: Unterhalb der Beschreibung auf Download Bike List klicken).Unsere Erfahrung hat aber gezeigt, dass man die Birnen auch so bedenkenlos verbauen kann, denn sowas kontrolliert A niemand und B sorgt es nur für mehr Sicherheit. Ggf ist es auch möglich sich die Birnen eintragen zu lassen. Bis zu 230 % helleres Licht als eine herkömmliche H4 Birne und einem tageslichtähnlichen weißen Lichtstrahl, beleuchten diese LED-Lampen alles klar, ohne dass entgegenkommende Fahrer geblendet werden.