Probably the best and most effective cleaner for stainless steel surfaces (e.g. exhaust manifolds & rear silencers). This cleaner really works wonders! We tested it ourselves in our workshop and could hardly believe how well and quickly the cleaner works (ideal for making manifolds and exhausts look like new again).After a few years, every beautiful stainless steel manifold that was once matt silver or polished no longer looks silver, but yellow.Simply spray such a manifold with the cleaner, wait 2-3 minutes and rinse with water. As if by magic, the manifold will look almost like new again, without grinding / rubbing or similar. Tip:For safety reasons, we recommend covering other parts of the motorcycle or removing the part to be cleaned.

Skyrich lithium-ion power battery with extra power. For the weight fetishists among motorcyclists.The power battery has more vapor than the original battery and starts your bike more reliably. Even if the cylinder is in a bad position (e.g. TDC) and the normal battery would not be able to turn the engine, the Power battery will not let you down. The battery also has more capacity. ATTENTION: Due to shipping regulations, we are only allowed to deliver batteries to certain countries (see list of countries at the end of the description). We do not ship batteries to all other countries. The battery weighs just approx. 1.5 kg. This saves between 2 - 4 kg depending on the battery installed. There is no easier way to save weight on your machine. Attention for air-cooled Triumph AC models built 2008-2009: These models have a different battery box and need a different battery (you can find these in the accessories articles in this description). You can recognize this by the fact that your battery has the designation YT12BS (WITHOUT X). 12 V maintenance-free lithium-ion battery, capacity 6 Ah, energy 72 Wh, dimensions in mm 150 x 87 x 105 Charging current recommended 2 amps, maximum charging current for fast charging 20 amps.Very cost-intensive, but LIGHT! We only supply the very latest technology.The battery is supplied pre-charged. With charge status indicator (simply press the button on top of the battery and the integrated LEDs will show you the current charge status).Another major advantage of lithium batteries is their extremely low self-discharge rate (maximum 5% per month). Our experience has shown that it is even lower. We recommend ordering our charger if you do not already have one that is lithium-ion capable. Countries we ship to: GermanyBelgiumDenmarkIrelandFrance, GermanyLuxembourgNetherlandsNorwayAustriaPolandPortugalRomaniaSwitzerlandSwedenSloveniaSlovakiaSpainHungary   Specific information on the lithium-ion battery:   Lithium-ion battery with overvoltage protection from Skyrich Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati. The Power Sports lithium-ion batteries in the LTM line are characterized by a heat-resistant, waterproof nylon housing and improved terminal connections Overcharge Protection (OP) The Skyrich battery has an extended battery management system (BMS) which, in addition to the balancers (ensures even charging/discharging of the battery), also includes overvoltage protection. This prevents the battery from being charged with a voltage of over 14.9V. Spacer (S) The battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip so that the battery fits exactly into the battery box. Waterproof (WP) The battery is completely waterproof and will not be damaged if the motorcycle is cleaned under high pressure. Indicator (I) All batteries are equipped with an improved state of charge indicator, which shows the battery's state of charge even more precisely. Replacing a standard lead-acid battery with a Skyrich lithium-ion battery can save up to 5 kg in weight without significant effort. The following advantages speak for Skyrich lithium-ion batteries: - Integrated overvoltage protection- approx. 1/3 of the weight of the comparable lead-acid battery- improved pole connections made of brass for best conductivity- waterproof- Completely black battery housing- battery housing made of nylon, therefore deformation due to heat is practically impossible- unbeatable cost/weight saving ratio- can be installed in any position as it contains no acid- Contains no heavy metals- Balanced discharge/charge of all cells through balancer- Fast charging with high charging current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- good performance even at high temperatures up to 60°C

The Beeline Moto Navigation System II is the smallest and smartest motorcycle navigation system available in the world.The new Beeline 2 is even more innovative, has more options, an improved display and an improved route display like the first series. In addition, the new system has glove-friendly buttons that are easy to operate even while driving.Visually, the Beeline sat nav is basically just a small black button that can be attached to and removed from the motorcycle in a matter of seconds. Navigation with this navigation system works via an arrow and km indicators on the Beeline display. The special feature of this navigation system is that it has two different navigation modes: 1. classic precise navigation, in which an exact route is determined. Here the navigation system gives you an exact route with turn-offs, kilometers etc. 2. directional navigation in which the navigation device only gives you one direction. In this mode, the Beeline acts more or less like a compass. You give the navigation device a destination and it only shows you one direction to drive in via the arrow. In my opinion, this is a very cool way of navigating for motorcycles. Because with a motorcycle, the journey is usually the destination and the rider can decide their own route and keep their nose to the wind as they please. The routes are set using a smart phone and the appropriate Beeline navigation app. Be sure to watch the video at the end of the description to get to know all the functions of the Beeline Navi! Another very good thing about the navigation device is the long battery life of 14 hours.It is also possible to order an additional charging adapter so that the navigation device can be charged on the motorcycle and used indefinitely (see accessories in this description) A mounting system is included in the scope of delivery (the Strap Mount System. You can also find the article under the accessories in this description if you want to read more about how these mounts work).3 other mounting options are also available (these can also be found under accessories in this description).   Versions: In the black version, the case is made of plastic. In the silver & gunmetal version, the case is made of metal. Included in delivery: 1 BEELINE Moto 2 navigation device 1 "Universal strap mount" navigation holder1 USB charging cableFits all motorcycles and scootersWaterproof and shockproofTwo navigation modesFour buttons (glove-friendly)Diameter of the active area: 30 mmWorldwide coverage (Google Maps)Record & share ridesStrava integration & GPX importAutomatic backlight for night ridesLifetime app and firmware updatesApp supports the following languages: English, German, French and JapanesePhone requirements: iPhone - iOS 9.2 and aboveAndroid phone with Google Play - 8.0 Oreo and aboveBluetooth 4.0 capability required Battery Capacity: 600mAhBattery operating time: 14 hours in operationMicro USB chargingDisplay Technology: Ultra-bright IPS TFT display with anti-reflective and hydrophobic coatingSize: 36.8mm (1.45") screen diagonal, 10cm total areaResolution: 412x412 (402ppi)Navigation Intelligent turn-by-turn navigation with estimated time of arrival and speed information.Classic arrow display in route and compass mode.Turn-by-turn directions: Warning LED and signal tone (spoken warnings via the app - currently only via BeelinePlus) Additional functions Speed limit display (depending on location)Record and share journeysGPX route import/exportSupports 8 languagesFun and fast route planning (depending on location)

The Beeline Moto Bar Mount Kit allows you to mount the Beeline Moto 2 Navigation System on dervers handlebars with different diameters. Fits motorcycle handlebars with 22mm, 25mm or 32mm diameter. Rubber washers included Adjustable head for optimal view of the navigation device

The Beeline Moto RAM Ball Mount Kit allows the attachment of the Beeline Moto navigation system to the common RAM ball systems, as they use many Navigtionssysteme (TomTom or SW.Motech fastening system eg). Fits RAM ball clamp with 1 inch diameter.

The Beeline Moto Mirror Mount Kit allows you to mount the Beeline Moto 2 Navigation System to a mirror arm. Fits rear view mirror rods with 10-16mm diameter. Adjustable for optimal angle Clamp with rubber to prevent scratches

Practical case to store the Beeline Moto 2 Navi when it is not on the bike. Made of ethylene vinyl acetate copolymer Soft inner lining Lid can be opened by horizontal zipper (all around) With power supply inside, for secure hold of Beeline Moto and charging cable Carabiner hook for attaching to belt, bag, etc.

Endless power! With this insert, any compatible mount* can be converted so that the Moto II can be easily charged while riding. Easy installationDirect connection to the 12V battery terminalsAdjustable orientation with top or bottom cable outletWeatherproof, sealed construction with replaceable contact pinsAutomatic power switching to avoid dead batteries*Not compatible with universal mount Included in delivery Powered mount insertExtended bolts for mounting2m 12V battery connection cable2x cable ties Notes With this Powered Mount insert, the Moto II device can be charged while riding. It is designed to be connected to the motorcycle battery with ring terminals in the same way that other accessories are connected to motorcycles, e.g. heated grips. The design allows all mounts (except the universal mount) to be adapted to power the device. To install, the original mount insert must be removed from the bracket, then the Powered Mount insert is fitted in its place. The Powered Mount insert is supplied with three different screws that can be used to attach it to the different brackets. The insert uses pogo pins to charge the device via contacts on the underside. The design is made to avoid corrosion problems that can often occur with this type of charging mount for navigation devices. Corrosion can occur if the mount is left outside in bad weather for long periods of time. The Powered Mount insert can be installed so that the cable exits from either the top or bottom. A rectifier chip in the device allows both contacts to accept positive or negative charge.

The new Cayo cell phone holder system from Motogadget made in Germany.In our opinion, the Cayo system is the best, most sophisticated and easiest to use cell phone holder & charging system available on the market. In contrast to most other manufacturers, you don't have to choose between numerous adapters / accessories etc. With the moto.dokk comes a perfect handlebar mount that integrates everything you really need. Handlebar mount / inductive charging / anti-vibration system - The system comes with various adapter rings that allow the mount to be fitted to any handlebar. - A cable for connection to a USB-A socket is included (most modern motorcycles have such a socket). This allows the cell phone to be charged inductively via the holder. If you do not have a USB-A socket, you can order the "battery.dokk" to charge your cell phone via the holder (see accessories in this description).- An anti-vibration plate (to prevent damage to the cell phone / camera) and an inductive charging function are integrated in the holder.   1-click holder / cell phone case We have tested the holder ourselves on some of our motorcycles and it works perfectly! The cell phone sits firmly in place with a flick of the wrist (no annoying turning / getting stuck or similar). The cell phone can be mounted in either portrait or landscape format. You have 2 options for attaching the cell phone to the holder:1. you order the stylish and very flat Cayo cell phone case "phone.dokk" (see accessories in this product description).2. you order the "uni.dokk" adhesive pad, which can be universally attached to any cell phone (see accessories in this product description). Classicbike-Raisch tip For very good and motorcycle-friendly navigation, we recommend the Calimoto app.   Summary: The full-featured mounting system. Attaches your smartphone quickly and securely to any motorcycle. Choose a suitable case or universal pad. Direct connection to the vehicle battery is possible with our battery.dokk. Integrated vibration decoupling Integrated inductive charging smartphone docking in portrait & landscape formatSuitable for all handlebar diametersOur moto.dokk is a mounting system for quickly and securely attaching your smartphone to your vehicle. The extremely compact housing integrates inconspicuously into the vehicle and combines inductive charging and vibration decoupling. - The scope of delivery includes a connection cable for a USB-A socket on the vehicle. When using an existing USB port on the vehicle, this must be switched on and off with the ignition. Proper functioning of inductive charging is guaranteed with our CAYO phone.dokk cases, provided the phone supports inductive charging. - When using a CAYO uni.dokk pad, inductive charging may be limited or not possible. - If there is no USB port on the vehicle, we recommend our CAYO battery.dokk for direct connection of the moto.dokk to the 12V vehicle battery. Suitable for all standard handlebar diameters and Fatbars:- 22.2mm (7/8")- 25.4mm (1")- 28.6mm (1 1/8")- 31.8mm (1 1/4")- 35.0mm (1 3/8")  

The new Cayo cell phone holder system from Motogadget, made in Germany.In our opinion, the Cayo system is the best, most sophisticated and easiest to use cell phone holder system on the market. The simple / inexpensive mount for short tours - The bike.dokk mount is a simple cell phone holder with which you can attach your cell phone to the handlebars of your motorcycle. Various adapter rings are included in the scope of delivery, which enable mounting on all common motorcycle/bicycle handlebars.- We recommend this mount to all customers who only need the mount occasionally for short trips. We recommend the "moto.dokk", which is equipped with a charging function and an anti-vibration system to protect the cell phone camera, for those who regularly have their cell phone on the motorcycle for longer periods of time. 1-Click holder / cell phone case We have tested the holder ourselves on some of our motorcycles and it works perfectly! The cell phone sits firmly in place with just one click (no annoying turning / getting stuck or similar). The cell phone can be mounted in either portrait or landscape format. You have 2 options for attaching the cell phone to the holder:1. you order the stylish and very flat Cayo phone case "phone.dokk" (see accessories in this product description).2. you order the "uni.dokk" adhesive pad, which can be universally attached to any cell phone (see accessories in this product description). Classicbike-Raisch tip For very good and motorcycle-friendly navigation, we recommend the Calimoto app.   Summary The quick and secure mounting system for your smartphone. Suitable for bicycles and motorcycles. Select suitable cover or universal pad separately. Very small & compact on the handlebarsQuick & secure attachmentPortrait & landscape format without conversionSuitable for all common handlebar diameters and Fatbars: - 22.2mm (7/8")- 25.4mm (1")- 28.6mm (1 1/8")- 31.8mm (1 1/4")- 35.0mm (1 3/8")  

With the Cayo phone.dokk, the cell phone can be attached to all Cayo holders with a flick of the wrist. The case has an elegant and very flat design to not only be practical but also look good. The surface of the case consists of a very pleasant soft-touch surface. As a small but not unimportant side effect, the case also protects your cell phone from damage if it falls out of your hand. An extra strong magnet is integrated into the case, allowing you to attach your phone to all magnetic mounts.

With the Cayo uni.dokk, you can attach your cell phone to all Cayo holders in one easy step. Don't fancy an extra cell phone case? Or do you already have one that you want to keep using? No problem! The uni.dokk is a strong adhesive pad that sticks to all surfaces.

The smart power adapter for connecting the moto.dokk directly to the vehicle battery via USB-C plug. Quick and easy to connect directly to the battery terminals  switches off when not in use, no battery discharge  no time-consuming search for ignition plus for the connection

Batterieüberbrückungskabel in dünner Ausführung. Diese Kabel sind mehr als ausreichend, um ein Fahrzeug, insbesondere ein Motorrad, zu überbrücken.Die dünnen Kabel mit den kleinen Klemmen sind wesentlich praktischer als die dicken, unhandlichen Kabel, die man kaum an die Batterieklemmen bekommt, wie man sie von Autos kennt. Länge: 1,6 m  

Engine oil specially developed by Motorex for air-cooled Boxer engines. This synthetic high-performance engine oil, specially developed for boxer engines, guarantees a stable lubricating film as well as a constantly high oil pressure in all areas of use and significantly reduces friction in the engine. Our years of experience and tests with various oil containers have shown that this oil is the best for our beloved BMW R nineT motorcycles.The Motorex oil can reduce oil consumption. Among the accessories in this description you will also find the right oil filter for your R9T so that you can carry out the oil change at home.

Classicbike-Raisch Plug & Play Schaltautomaten Kit für BMW R nineT Modelle. Die Montage des Quickshifters ist sehr einfach und in kurzer Zeit erledigt (es ist kein Kabel Schneiden, Löten oder verändern notwendig).Eine ausführliche, Modell bezogene Beschreibung mit Bildern ist im Lieferumfang enthalten. Außerdem sind alle weiteren notwendigen Montagematerialien sowie ein Schraubenschlüssel im Lieferumfang enthalten. Das Schaltautomat Modul wird von uns passend voreingestellt, damit ihr ihn nur einbauen müsst und direkt losfahren könnt. Zur Montage- Es wird mittelfeste Schraubensicherung benötigt. Wer diese nicht zuhause hat, kann sich hier direkt eine kleine Flasche dazu bestellen (findet ihr unter den Zubehör Artikeln in dieser Beschreibung).- Außerdem empfehlen wir zur schöneren Kabelführung und Ansicht eine Rolle Gewebeband dazu zu bestellen (findet ihr auch unter den Zubehörartikeln). Wir haben den Automaten an unseren eigenen Maschinen über eine komplette Saison gefahren und ausgiebig getestet, bevor wir ihn euch anbieten. Er funktioniert wirklich überragend! In erster Linie ist so ein Quickshifter natürlich richtig geil, wenn man grade richtig sportlich unterwegs ist und die Gänge möglichst schnell durchschalten will. Einfach unter Volllast einen Gang hochschalten und der Automat übernimmt die Arbeit für dich. Schneller kann man nicht schalten!Allerdings ist es auch beim entspannten Fahren durch die City sehr angenehm nicht bei jedem hochschalten die Kupplung ziehen zu müssen. Ich finde es besonders angenehm, wenn man etwas zügiger von 20 km/h auf z.B. 70-80 km/h durchbeschleunigt und man Gang für Gang entspannt durchschalten kann.  Für alle die nicht wissen was ein Schaltautomat macht. Dieser unterbricht beim Schaltvorgang (nur beim Gänge hoch schalten) die Zündung. Das erlaubt dir, dass du ohne die Kupplung zu ziehen & ohne Gas weg zu nehmen die Gänge hochschalten kannst.

Probably the best & most practical motorcycle dryer sheet that we ever has in our hands. We ourselves, especially Yannic, maintain our motorcycles regularly and with passion. Who does not know it, the clean & wet motorcycle must be dried. Towels are too rough and make scratches, normal cleaning cloths do not take enough moisture.The premium dry cloth is the solution. This soft cloth only needs to be pulled once over a wet part (like tank) and the cloth immediately absorbs all the water. By the fast and many water absorbing, your motorcycle is dried very gently and there are no unnecessary scratches. Due to the heavy grammage of the cloth and the so-called twisted pile fibers, the premium dryer sheet can absorb a lot of water. We use the dry cloths ourselves for every car wash and are thrilled, a real labor saver. Dimensions: 40 x 40cm  

A practical steel main stand, suitable for all BMW R9T models from SW-Motech.Thanks to a new technique, the main stand can be mounted without any effort: The spring is hooked in without tension and tightened via a screw. The indestructible yet lightweight tubular steel construction offers the best lean and ground clearance, easy jacking up and a firm stand - whether for maintenance or on the road. The purchase of an additional assembly stand is usually no longer necessary. Ideal for the winter months: the main stand relieves the strain on the tyres when the bike is parked for long periods. Secure stand for rides with a lot of luggage and maintenance workModel-specific design for easy mounting and high lean angle clearanceEasy jacking up of the motorbikeOutrigger for optimum leverageBest corrosion resistance due to sandblasting before powder coating the surfaceMade of robust steel With ABE

A set of stylish leather cable ties. These cool leather straps are the stylish alternative to the original rubber / plastic clamps or cable ties that are mostly used on motorcycles.Who does not know it, the annoying lines & cables on the motorcycle, which actually no one wants to have but unfortunately are mandatory. Then these must also be attached to the handlebars or the frame of the motorcycle, for example, and this is usually unsightly with plastic holders.With the leather cable ties, the problem is now done! Because the straps are not only practical as a cable tie, but they are your bike also skillfully on. The devil is in the details. The leather straps have a strong adhesive 3M tape on the back, with which you can attach any cable / line perfectly and securely. A set consists of 4 straps.

MOTUL ENGINE CLEAN can be used in all gasoline engines. Deposits and operational contamination are reliably dissolved in the entire oil circuit. Aggressive combustion residues are neutralized. The dissolved contaminants are drained out of the engine with the used oil. Highly effective lubrication components protect the engine during the cleaning process. ADVANTAGES:A clean oil circuit is a prerequisite for effective engine operation. Even problem areas such as the hydraulic tappet, ring gap and piston rings are cleaned of residues and deposits. The cleaned engine can develop its full performance again with the fresh engine oil. With the regular application of MOTUL ENGINE CLEAN you achieve without additional work: - a longer service life of SCR-KAT, DPF, KAT and turbocharger- significantly improved and uniform compression on all cylinders- improved engine performance and response- protects against wear and maintains dirt holding capacity- reduced oil consumption, fuel consumption and pollutant emissions. USAGE:Before each oil change, add 1 can of Engine Clean to the used engine oil at operating temperature. Run engine at idle speed for 15 minutes. Change oil and filter. The content of one can is sufficient for an oil filling quantity of up to 5 liters. For engines with a higher oil fill quantity, 60 ml of MOTUL ENGINE CLEAN should be dosed per liter of engine oil. In the case of particularly stubborn contamination, a further application is required.

The Motul care set contains everything you need for the thorough care of your motorcycle.True to the motto who loves his motorcycle cleans! In the set are the following things included: 2x Raisch microfiber cleaning cloth: A very absorbent microfiber cloth. A cloth to wash your motorcycle and a cloth to dry. 1x Microfiber Premium Cleaning Cloth: Probably the best cloth we have ever had in our hands. Optimal for quick care, if your bike is just a little dusty. Once wipe over it and everything is gone. 1x premium drying cloth: This cloth only needs to be walked over a wet surface once and it absorbs all the water (see video below)  1 liter Motul Moto Wash Motorcycle Cleaner 400 ml Motul Rim Cleaner 400 ml Motul Insect Remover 400 ml Shine & Go Silicone Spray (After cleaning the bike, spray on the engine block, metal parts as well as plastic parts and your bike will look like a new bike again) 400 ml Motul Wash & Wax (Paint finisher and fast cleaner. Apply to the varnish, let it work for 1-2 minutes and wipe it off). In the set for a special price!  

In the Tour Package are five very practical things included, which we recommend as experienced tour riders to take on every motorcycle tour. In addition, we recommend an additional tool kit to pack on each tour. Tool sets from us can be found under the accessories in this description. In the set are the following things included: 1x Raisch microfiber cleaning cloth: useful for minor repairs on the road times what to wipe clean on the bike. 1x Motul Hands Clean Paste: A magical cream that you simply smear into the dirty / oily hands and rub neatly. Like an eraser, the passe rubs away any dirt. 300 ml Motul tire puncture spray: A flat tire on a motorcycle tour is simply a disaster, you can not even go to the nearest tire dealer. With the puncture spray you do not happen!  1x Motul Chain Paste: The practical chain lubricator for on the road. 1x Bowden cable repair kit: Everyone has had it or heard of it. A torn gas or clutch cable. So every tour is finished on the spot. With the repair kit you can repair your train. In the set at a special price!

Motul Chain Clean Set contains: 400ml Motul Chain Clean: Even the chain on a well-kept motorcycle should be cleaned regularly. So that this A lasts long and B the motorcycle looks gepfelgt. 400ml Motul Chain Lube: Chain grease for regular chain maintenance. The Motul Chain Lube Spray is a transparent spray, which should be applied thinly and thus the motorcycle (swingarm, chain guard, sprocket cover, etc.) not messed up as some other chain sprays. 150ml Chain Paste: Chain Paste to smear for the quick chain lubricate in between, if times no helper is available. In the set at a special price!

Elimination of telescopic fork breakaway torque.   Another new development of Motorrad-Technik CZECH in the field of synthetic lubricants.   The application of HKS GGV completely eliminates the so-called telescopic fork breakaway torque. The smallest bumps and the like are no longer transmitted from the unsprung part of the telescopic fork to the motorcycle. The result: silky smooth, supple handling and the safest possible ground contact. A noticeable benefit! In combination with a HKS extremely lubricated chain results in a "buttery smooth ride"!!! A breakaway torque no longer exists!   Package size:100 ml drip-on plastic bottle     Instructions for use HKS GGV 100 ml drip-on plastic bottle External application: Rub 3-4 drops of HKS GGV on the sealing lip of each fork leg with your finger.Repeat every 1,000 - 1,500 km. Internal application: Add 2 ccm HKS GGV per 100 ccm fork oil.  

High quality NGK spark plug suitable for all BMW R nineT models.

Many are the large activated carbon filter in the R nineT Euro 4 models a thorn in the eye. To us it was also with our latest Scrambler conversion. So we have put together a small and simple kit to remove the filter. The kit includes all materials and step by step instructions to remove the filter cartridge without further work.

The Beeline Moto navigation system is the smallest and smartest motorcycle navigation system available in the world.Visually, the Beeline Navi is virtually just a small black button, which you have within seconds on the motorcycle and off again. The navigation of this navigator works via a file and km displays on the display of the Beeline. The special thing about this navigation system is that it has two different navigation modes: 1. classic exact navigation, where an exact route is determined. Here, the navigator gives a precise route with turns, km information, etc.. 2. directional navigation, where the navigator gives only one direction. In this mode the Beeline works like a compass. You give the Navi a destination and it shows you via the arrow only one direction in which you have to go. In my opinion, this is a very cool way to navigate for motorcycles. Because with the motorcycle is usually the way the goal and the driver can think about his own route and hold his nose at will in the wind. The routes are set with a smart phone and the appropriate Beeline navigation app. Be sure to check out the video at the end of the description to get to know all the features of the Beeline Navi in detail! Another very good thing about the Navi is the long battery life of 30Std. In the scope of delivery are 2 mounting systems included (1x the Sticky Pad Mount System / 1x the Strap Mount System. Both items can also be found under the accessories in this description, if you want to read in more detail how these mounts work).3 Other mounting options are also available (you can also find these under the accessory items in this description). Finishes: In the black version, the case is made of plastic. In the silver & gunmetal version, the case is made of metal. Included in delivery: 1 navigation device BEELINE Moto in black 1 navigation mount "Sticky Pad 1 navigation mount "Universal Strap Mount 1 USB charging cable Fits all motorcycles and scooters Waterproof and shockproof Two navigation modes Four buttons (glove friendly) Diameter of active area: 30 mm Worldwide coverage (Google Maps) Record & share rides Strava integration & GPX import Automatic backlight for night riding Lifetime app and firmware updates App supports the following languages: English, German, French and Japanese Mobile Phone Requirements: iPhone - iOS 9.2 and above OR Android phone with Google Play - 7.0 Nougat and above. Bluetooth 4.0 capability required Battery Capacity: 400mAh Battery operating time: without backlight: 30 hours - with backlight: 10 hours - mixed: 20 hours Battery life in standby: 2-3 months Micro USB charging Translated with www.DeepL.com/Translator (free version)

The Beeline Moto Bar Mount Kit allows you to mount the Beeline Moto Navigation System on dervers handlebars with different diameters. Fits motorcycle handlebars with 22mm, 25mm or 32mm diameter. Rubber washers included Adjustable head for optimal view of the navigation device

The Beeline Moto Mirror Mount Kit allows you to mount the Beeline Moto Navigation System to a mirror arm. Fits rear view mirror rods with 10-16mm diameter. Adjustable for optimal angle Clamp with rubber to prevent scratches

The Beeline Moto RAM Ball Mount Kit allows the attachment of the Beeline Moto navigation system to the common RAM ball systems, as they use many Navigtionssysteme (TomTom or SW.Motech fastening system eg). Fits RAM ball clamp with 1 inch diameter.

Practical case to store the Beeline Moto Navi when it is not on the bike. Made of ethylene vinyl acetate copolymer Soft inner lining Lid can be opened by horizontal zipper (all around) With power supply inside, for secure hold of Beeline Moto and charging cable Carabiner hook for attaching to belt, bag, etc.

The Beeline Moto RAM Ball Mount Kit allows the attachment of the Beeline Moto navigation system to the common RAM ball systems, as they use many Navigtionssysteme (TomTom or SW.Motech fastening system eg). Fits RAM ball clamp with 1 inch diameter.

The Beeline Moto Sticky Mount is an arm on which the Beeline Navi can be attached. At the end of the arm is a strong adhesive, which you can stick for example on a triple clamp. Attachment by adhesive pad to a.o. instrument panels, tanks, dashboard Fully adjustable Removable extension Attention. This attachment is supplied free of charge with the delivery of a Beeline Moto Navi 1x.

Fabric tape adhesive, which is perfect to wrap several cables together neatly and chic. WIe, for example, a wiring harness. Perfectly suited if you rewired anything on the bike and would like to have the cables neatly together in one strand.

Eine CNC gefräste Abdeckung für den Kardan Antrieb der BMW R nineT Modelle.

The practical lock for day trips into the city.Who doesn't know the feeling of cruising into town or to the park on a motorbike for a stroll? Where to put the helmet and the bag?! This practical 1.80m long ring lock allows you to attach your bag or helmet to the motorbike frame and protect it from easy theft.

With the SP Connect UNIVERSAL PHONE CASE you can use almost any Smartphone (maximum phone size see at the bottom of the description) on any SP Connect cell phone cradle from our program. The perfect universal case for almost any cell phone. No need to buy an expensive, model-specific case for your cell phone, which has to be bought new every time you change your phone.Simply slide the cell phone into the case, roll up the opening and fix it with the velcro surface. This way, your cell phone is protected from rain, sweat, mud and dust while maintaining touchscreen operability. The fleece slip-on insert and the adhesive EVA frame allow you to find the perfect position for your smartphone.The small, inconspicuous SP Connect cell phone holder (must be purchased separately) stays permanently on your bike and when needed, the cell phone is inserted into the case and mounted to the holder in one easy step. This saves you the purchase of an expensive motorcycle navigation system. Integrated mounting mechanismProtection against rain, sweat, mud and dustTouchscreen operability remains possibleWindow for cameraScratch-free fleece insertReflective security printingSize M: max. telephone size 153 x 70 mmSize L: max. telephone size 165 x 80 mm You can find suitable brackets for the motorcycle in the accessories of this product description.

The SP Connect handlebar mount is simply clamped around your handlebars (mounting is done within a few minutes, the handlebars do not have to be disassembled).Then you can attach any SP Conncet Handy Sleeve (e.g. the universal sleeve from our assortment) to the holder with a single movement. Faster, easier and cheaper you can not get a navigation system to your bike. CNC manufactured from aircraft aluminum  Landscape or portrait mounting  Super stable 360° adjustment in 6° steps  Suitable for standard and oversize handlebars (2.22 / 2.54 / 2.86 / 3.17 cm // or 0.875 / 1.0 / 1.125 / 1.25 inch diameter) Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines. The perfect universal cell phone cover for this mount can be found in the accessories of this description.

The SP Connect clutch/brake fitting bracket is simply attached to the clamp of your clutch or brake fitting. Suitable screws for mounting are included in delivery.Each SP Conncet Handy sleeve (e.g. the universal sleeve from our range) can be attached to the bracket with a single hand movement. Faster, easier and cheaper you can not get a navigation system to your motorcycle. CNC milled from aluminium Pivoting and rotating head for perfect alignmentHigh / landscape format OptionStainless steel screws Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines. The perfect universal cell phone cover for this mount can be found in the accessories of this description.

The SP Connect mirror mount is easily and quickly clamped around the arm of your mirror (see below for possible mirror arm diameters). You can then attach any SP Conncet cell phone cover (e.g. the universal cover from our range) to the holder with one simple movement. Faster, easier and cheaper you can not get a navigation system to your motorcycle. Partly CNC milled aluminum Pivoting and rotating head for perfect alignment Landscape or portrait mounting  Super stable 360° adjustment in 6° steps  Suitable for the following mirror diameters: 10 - 16 mm or 0.39 - 0.63 inch Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines. The perfect universal cell phone cover for this mount can be found in the accessories of this description.

The SP Connect handlebar clamp bracket is mounted on the handlebar clamp of your bike.The delivery includes 3 screws for mounting: M8 screws in three different lengths: 40/45/50 mm Each SP Conncet cell phone cover (e.g. the universal cover from our product range) can be attached to the holder with a single hand movement. Faster, easier and cheaper you can not get a navigation system to your motorcycle CNC milled from aluminiumPivoting and rotating head for perfect alignmentportrait / landscape optionStainless steel screwsNote: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines. The perfect universal cell phone cover for this mount can be found in the accessories of this description.

The SP Connect steering head bracket is inserted into the steering head from above and clamped tightly with an expansion plug. For this it is of course necessary that your motorcycle has an open steering head nut. Perfectly suitable for motorcycles with stub handlebars.The delivery includes different expansion plugs to cover all dimensions (dimensions see below). Every SP Conncet cell phone cover (e.g. the universal cover from our assortment) can be attached to the holder with a single hand movement. Faster, easier and cheaper you can not get a navigation system to your motorcycle For Supersport motorcycles (stub handlebars) CNC-machined from aircraft aluminum Vibration damping Portrait / landscape option Stainless steel hardware For diameters 12-30mm: 12-15mm, 15-18mm, 18-21mm, 21-24mm, 24-27mm, 27-30mm Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines. The perfect universal cell phone cover for this mount can be found in the accessories of this description.

With the Velcro fastener, the SP Connect™ Universal Mount can be attached to rods or tubes with a diameter between 20 and 90mm (0.9 - 3.5 inches). The spring-loaded head allows a tool-free 360° rotation of the attached device. The practical thing about this mount is that it can be quickly attached and detached from the motorcycle. In addition, it is also universal and can be used for many other things.Your smartphone can be securely attached to a bicycle, motorcycle, golf cart or stroller so you can use apps, access playlists, read messages or navigate. Every SP Conncet cell phone case (e.g. the universal case from our product range) can be attached to the cradle with a single hand movement. Faster, easier and cheaper you can't get a navigation system on your motorcycle Assembly and adjustment without tools 360° adjustment / 45° step size For diameters from 20-90mm (0.9-3.5 inches) 2 different velcro lengths Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines. The perfect universal cell phone cover for this mount can be found in the accessories of this description.

Use the SP Connect ANTI VIBRATION MODULE to further reduce vibrations in different frequency ranges. The development of the new product is a reaction to the complexity of newer smartphone models, whose camera systems consist of increasingly sensitive components. The specially developed elastomer inlay dampens in all directions and thus causes up to 60% less vibrations (e.g.: from the motorcycle engine) to reach your smartphone, which could affect the mechanical image stabilizer of the camera. Your smartphone is protected, but still remains stable and quietly mounted so that you can navigate while driving without any problems. CNC-machined from aircraft aluminum 3D vibration damping through specially developed elastomer inlay Landscape or portrait mounting  Super stable 360° adjustment in 6° steps  Suitable for all SP Connect mounts with the standard damping head Easy DIY assembly

Attach the adhesive foil of the SP ConnectT Universal Interface directly to your smartphone or cell phone cover. This way you can attach your cell phone to all SP Connect mounts from our range. Simply hold it on, turn the patented twist lock and you're done. It's quicker and easier than ever to get a navigation system on your motorcycle. 3M™ adhesive foil Secure and flat interface Size: 66 x 55mm (2.6 x 2.17 inch)

Bei allen R nine T Modellen ist es nicht grade einfach den Zündkerzenstecker ab zu ziehen.Man sollte auch auf keinen Fall mit einer Zange oder ähnlichem dran gehen, da diese empfindlich sind und dadurch schnell kaputt gehen.Mit diesem spezial Werkzeug, lassen sich die Stecker ganz einfach abziehen.

Aluminium frame batch with nineT or R-Logo lettering for the passenger frame on all BMW R nine T models. Many people drive their R9T without pillion frame and have the two threads open on the right & left side.Therefore we designed two nice badges which are mounted on this place.Matching black screws are including.

The Rizoma DBL system is a safety device that activates a flashing brake light to warn vehicles behind an intense and sudden braking. The device is activated when properly mounted on the motorcycle when the vehicle makes a sudden deceleration / emergency stop by flashing the brake light at a frequency of 4 Hz (flickering light as known from cars during an emergency stop). The system only works at speeds of 40 km/h and above. The DBL-Box can easily be connected to the rear light of the motorcycle or to a combination indicator.The sensor is an acceleration sensor and therefore does not need a connection to the brake hydraulics.

Aluminium milled emblems for the tank and the hump (or the Urban seat) of the BMW R nine T models, in Black Design.For all those who find the original BMW logo too original or simply too colourful. The emblems are deep black anodized and then re-milled in the style of the BMW propeller. The subsequent milling results in a very nice contrast.From behind the emblems are provided with strongly adhesive 3M foil, whereby they can be stuck on completely simply instead of the original ones. The original ones can be easily removed with a plastic wedge or something similar (it is best to heat them a little before removing them). The emblems will certainly fit in many other places, so here are the dimensions: tank emblem Ø: 70mm / hump emblem Ø: 26mm Emblems are sold SINGLE. So you have to order 2 pcs for the tank if you want it on both sides.

Best rag we ever had in our hands! A beautiful soft cloth that is perfect to clean and maintain your bike. Due to the high and above all very fast suction power, the cloth is ideal for wiping off the last drops of water from the motorcycle after washing. We therefore recommend that you use 2 cloths at once: One to clean and one to wipe dry (which will always stay clean).