License plate screw set
€8.90*
Available, delivery time: 1-3 days
Zubehörartikel
from €169.00*
from €199.00*
€159.00*
from €129.95*
from €370.00*
from €199.00*
from €239.95*
from €235.00*
| Product number: | CB11444 |
| item number: | 211257519 |
Product information "License plate screw set"
These screws are powder coated in the matching colors (white / blue / black) for the license plate.
We have our stainless steel screws powdered in Germany. This allows us to guarantee a high quality. The tool still fits, even the color does not burst.
Delivery:
1x screw M5x20 blue
2x screw M5x20 black
3x screw M5x20 white
4x self-locking nut M5
4x washer M5 DIN9021
The advantages of powder-coated screws:
- Mechanically resilient
- Corrosion resistant
- Weather resistant
- Environmentally friendly
| Models BMW R nineT: |
|
|---|---|
| Models Triumph AC until 2015: |
|
| Triumph LC models from 2016: |
|
| BMW R nineT |
R nineT /5 EU 4
R nineT Classic EU 3
R nineT Classic EU 4
R nineT Classic EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
|
|---|---|
| BMW R12 |
R12 Cruiser
R12 nineT
|
| Triumph 400er |
Scrambler 400 X
Speed 400
|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
| Triumph LC ab 2016 |
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
|
0
0
0
0
There aren't any asked questions yet.
Zubehörartikel
Heck Weck Kit
CB00468M
/ RS-1
From
€169.00*
Raisch rear wake kit for Triumph Bonneville, Thruxton & Scrambler. With this kit the bike gets a completely clean rear. Without the big original rear fender and without the original rear traffic lights made of plastic.The most minimalistic and elegant rear kit available on the market for these motorcycles!
Due to the rear under fairing (aluminum lower plate) there is a good splash protection. A LED license plate light with E-number is also included. License plate holder as well as subplate are precisely laser cut from aluminum in Germany & black powder coated.It also comes with a plug that fits into the original wiring harness. That is, only turn signals, lights, etc. must be crimped and can then be connected without having to change anything in the wiring harness.All other cables, connectors, screws, etc. that are needed for installation are of course also included.
Since the HeckWeck kit does NOT have a central tail light, it is mandatory to have 3in1 turn signals (these combine turn, tail & brake light in one turn signal).Further down in this description you can order the turn signals in a set and get 10% discount on the turn signals.All turn signals listed here are with E-number and street legal.
If you don't want to wire and crimp the enclosed cables, plugs & insulations by yourself, you can order this service as well (you can add it to the set below).
The Kit is available in 2 versions
Version 1: The turn signals are mounted with a retaining plate from the inside of the strut. When the ignition is off you almost think at the motorcycle are no turn signals on it (but you see them well enough when they light up. Is not so Stvo compliant, because the turn signals are too far in the rear.
Version 2: The turn signals are mounted directly on the license plate holder (turn signal holder are with the license plate holder). Legal and StvO compliant.
To have the kit 100% legal, a reflector must still be attached to the license plate (you can also find it below & add it to your kit).
Matching / same turn signals for front you will find at the very end of this description under the accessories.
HeckWeck Kit - Thruxton 1200
CB10948M
/ RS-1
From
€199.00*
Classicbike-Raisch rear wake kit for Thruxton 1200 - R - RS - TFC.
So nice clean & tidy should look the tail of a CafeRacer. Precise own production from aluminum and black powder coated.
Turn signal holder: These must be ordered separately. You will find two different turn signal holders below the description.
Turn signal holder Vario: The turn signals are attached directly to the license plate with the Vario turn signal holders (the turn signal holders can be adjusted in width so that each turn signal sits in the perfect position for each license plate width).This version is legal & StvO compliant. Turn signal holder rear shocks: The turn signals are mounted with a retaining plate from the inside of the strut. When the ignition is off you almost think the bike has no turn signals on it (but you can see them well enough when they light up). However, is not Stvo compliant, because the turn signals are too far in the rear).
Due to the rear under fairing (lower shell) there is a good splash protection. A LED license plate light with E-number is also included. It also comes with a plug that fits into the original wiring harness. That is, only turn signals, lights, etc. must be crimped and can then be connected without having to change anything on the wiring harness.
All other cables, connectors, screws, etc. that are needed for installation are of course also included.
Since the HeckWeck kit does NOT have a central tail light, it is mandatory to have 3in1 turn signals (these combine turn, tail & brake light in one turn signal).Further down in this description you can order the turn signals in a set and get 10% discount on the turn signals.All turn signals listed here are with E-number and street legal.
The conversion succeeds even less experienced screwdrivers without problems (because we pack a detailed installation instructions). Resistors are not necessary, because the flashing frequency can be adjusted via the menu.
Who does not dare to make the wiring for the lighting itself or simply does not feel like it, can order the ready wiring (accessory article HeckWeck Kit / LC under the 3-1 turn signals).
If you want to have it 100% correct for TÜV & police, you can order a reflector (accessory article HeckWeck Kit / LC under the 3-1 turn signals).
In addition, we recommend our license plate screw set to order to mount the license plate can be beautiful (accessory article HeckWeck Kit / LC under the 3-1 turn signals).
Rear conversion AC Schnitzer
CB10600
/ RS21
€159.00*
AC Schnitzer rear rear fenders with new LED taillight (no backlight) with ABE
Lucas or StopHeck Kit
CB11042M
/ RS2
From
€129.95*
Heck-Eliminator Kit with Lucas taillight for all air-cooled triumphs.
For those who do not want to have a fender anymore but still want a classic taillight. A plug and play solution. Everything is what is needed. The taillight and a cable set which only has to be wired with the turn signals and the taillight and then fits into the original wiring harness. Only blinkers are needed, of course.
Triumph Main Stand Kit
CB10766M
/ RS600
From
€370.00*
High-quality tailor-made main stand kit that facilitates the cleaning and maintenance of the rear wheel. With complete assembly accessories.
HeckWeck Kit - Bonneville
CB11198.1M
/ RS-1
From
€199.00*
Classicbike-Raisch Heck-Weck Kit for Triumph Bonneville T100 / T120.Made in Germany
A rear must look this clean and tidy if you don't want a rear mudguard on your bike.
Turn signal holders: These must be ordered separately. You will find two different blinker holders below the description.
Vario blinker holder: The turn signals are attached directly to the license plate with the Vario turn signal holders (the turn signal holders can be adjusted in width so that each turn signal sits in the perfect position for every license plate width).This version is legal & StvO compliant. Turn signal holder strut:The indicators are mounted on the strut from the inside using a retaining plate. When the ignition is switched off, you almost think there are no indicators on the bike (but you can see them well enough when they light up). However, this is not Stvo-compliant, as the indicators are too far to the rear).
ATTENTION: If you have installed a StreetTwin or other flat seat on your Bonneville (e.g. our Cool Seat, the Tamarit Silverstone Seat, a Crafton seat or the flat Triumph accessory seat), you should choose the kit for the StreetTwin. The reason for this is that the license plate holder on the Street Twin is slightly shorter, otherwise the kit is the same.
The rear lower fairing (lower shell) provides good splash protection. An LED license plate light with E-number is also included. A plug is also supplied which fits into the original wiring harness. In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness.All other cables, plugs, screws etc. required for installation are of course also included.The license plate holder is small enough to accommodate any motorcycle license plate available in the world and be completely concealed.
As the HeckWeck kit does NOT include a central rear light, it is essential to have 3in1 indicators (these combine indicator, rear & brake light in one blinker).Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.All indicators listed here have an E number and are road legal.
Even inexperienced mechanics will have no problems with the conversion (as we include detailed fitting instructions). Resistors are not necessary as the flashing frequency can be set via the menu.
If you don't feel confident enough to do the wiring for the lighting yourself or simply don't feel like it, you can order the ready-made wiring (accessory article HeckWeck Kit / LC under the 3-1 indicators).
If you want to have it 100% correct for TÜV & police, you can also order a reflector (accessory article HeckWeck Kit / LC under the 3-1 indicators).
We also recommend ordering our license plate screw set in order to be able to mount the license plate nicely (accessory article HeckWeck Kit / LC under the 3-1 indicators).
Smart Heck for StreeT & Bonneville
CB10904M
/ RS5
From
€239.95*
A nice crisp and short tail all Street & Bonneville LC models
Perfect for all those who find the original fender and the Kz mount too big and bulky, but still want a bit of fender. The kit comes with all brackets, mounting hardware and rear light. The fender is made of black GFK unpainted.
Attention: Does NOT fit the Bonneville with the original seat. A flat StreetTwin seat or e.g. the Cool Seat from our program must be mounted.
The turn signals can be mounted simply as in the photos on the fender (for this a hole must be drilled into the fender) or one mounts them with the help of an extra holder on the number plate (see accessories in this description).
Rizoma Alu Rear Mudguard BL & SI
CB11264M
/ RS2
€235.00*
Aluminum mudguards for Bonneville and StreetTwin models.
Fitting to the front wheel fender, Rizoma also has a rear wheel fender in the same aluminum finish.
The mudguard is supplied with plug and play with mounting brackets and screws. Holes for the taillight must be set individually. We recommend the rear lights which can be found in the accessories of this description,
The license plate must be attached to the side of the wing or an additional license plate must be fitted.
Universal license plate holder
CB11294M
/ RS600
From
€29.95*
Universal identification holder for mudguards.
The license plate is universal for many mudguards. It is screwed from the inside to the fender (see photo)
Motone Tail Kit LC
CB11402M
/ RS1
From
€174.95*
Rear light kit. Fits StreetTwin, Street Scrambler, Street Cup, Bonneville T120 & T100, Speed Twin 900, Scrambler 900
The kit is complete with all mounting materials, cable set and including rear light so that it can be fitted plug & play. The indicators are not included. Here we offer you a variety of indicators in our range. We recommend the Drops indicators for those who like a very classic look. If you would like the indicators to be a little smaller, we recommend the Pico indicators. The original indicators can also be used.
The Motone Tail Tidy Kit is a classic solution for continuing to install a central tail light on your Triumph if you want to remove the rear mudguard.There are kits with different tail lights to choose from. The classic and tried and tested version is of course the Lucas rear light.
Tail Tidy Eliminator Kit
CB00451
/ RS1
€99.00*
Classicbike-Raisch rear mudguard eliminator kit for Triumph AC models Bonneville, Thruxton & Scrambler.
Cool look without the big original rear wing and without the huge tail light.Consisting of a black coated aluminium plate that serves as a splash guard, an aluminium number plate holder, mounting material and installation instructions.We recommend ordering the Raisch cable set as well. This can be plugged into the original wiring harness and only needs to be connected to the turn signals / tail light. You will find the cable set under the accessories in the description.
The licence plate holder fits with the 2 holes in the seat screw connection and at the same time serves as a support for the tail light & indicators.
Matching tail lights can be found under the accessories below the description.
We recommend the licence plate screws and a reflector as optional accessories (for those who want to be 100% legal).
Tail Elimination Kit Thruxton / Speed Twin
CB11023M
/ RS1
From
€249.00*
Classicbike-Raisch rear fender eliminator kit.
A sleek rear end with a central LED tail light, further emphasizing the sporty lines of the Thruxton / Speed Twin.
Precisely manufactured in-house from stainless steel & aluminum (black coated).100% accurate fit and TÜV compliant, does not need to be registered.
Due to the rear under fairing (lower shell), which is included in the kit, there is a good splash protection for electrics and all other components in the rear area of the Thruxton / Speed Twin.
The LED tail light (with E-mark) fits perfectly to the sporty, classic look. Available in red, clear or dark. A license plate light is integrated in the tail light.The original Triumph turn signals can NOT be used. Therefore we recommend to order a pair of nice small LED turn signals (matching the LED tail light).For mounting the turn signals, a turn signal holder is included, which sits with the license plate. This is variable in width adjustable to have the perfect measure depending on the license plate width and turn signals (see picture 3 & 4).
Further down in this description you can order the turn signals right in the set and then get 10% discount on the turn signals.
The matching holes for the taillight, license plate and turn signals are of course already present. Thus, nothing more must be drilled & you have a plug & play solution, without extra adjustment work. It comes with a connector that fits into the original wiring harness. That is, only turn signals, tail light, etc. must be crimped and can then be connected without having to change anything in the wiring harness. The conversion succeeds even less experienced screwdrivers without problems, because a detailed installation guide is included. Resistors are not necessary, because the flashing frequency can be set via the vehicle menu.
Accessory recommendations:
Who does not trust himself to make the wiring for the lighting itself or simply does not feel like it, which can order the ready wiring to it (see accessories article rear Eliminator Kit / LC further down in the description).
Who wants to have it 100% correct for TÜV & police, which can still order a reflector in addition (accessory article rear Eliminator Kit / LC).
In addition, we recommend our license plate screw set to order, in order to mount the license plate can be beautiful (accessory article rear Eliminator Kit / LC).
Scope of delivery:
License plate holder
Turn signal holder vario (the width can be adjusted individually depending on the license plate and turn signal length)
LED tail light
Aluminum rear lower shell
Cable set
Mounting material
Mounting instructions
License plate holder R9T
CB10745M
/ RS600
From
€169.90*
License plate holder R9T. Made in Germany. Black powdercoated. Very well processed.
Due to the processed material, this license plate retains a very good weather resistance and convinces with a long service life.
The license plate is made of robust, sturdy material.
There is no need to change any trim panels.
Very good fit. The angle of inclination can be adjusted without gaps.
Two M6 screws with locking nuts and a locking screw ensure a stable hold.
The flasher tubes are infinitely variable and are fastened by means of two M4 cap screws and a self-locking nut.
The flasher tubes are equipped with a 10.5 mm hole for the turn signals. A floor plate is also included. We supply including new LED taillight as well as a resistor so it works properly
Heavy Duty Alu Rear Fender
CB11063.1
/ RS600
€219.95*
Design:
Brushed
Ein schön kurzer Alu-Kotflügel der Plug&Play anzubauen ist. Passt an alle Bonneville, Scrambler und Thruxton Modelle.
Der Kotflügel ist aus sehr hochwertigem massiven Alu (wahlweise in poliert oder matt gebürstet). Er ist etwas breiter als der B-PP-A Au Kotflügel, den wir auch anbieten. Also perfekt geeignet für alle, die einen etwas breiteren Hinterradreifen (140, 150 oder 160) fahren. Ausserdem hängt er etwas tiefer als der originale, um eine flachere Linie zu bekommen (weniger Luft zwischen Kotflügel und Reifen).
AC Schnitzer KZ holder in the center
CB10823
/ RS600
€228.99*
Center plate holder for AC Schnitzer fuet BMW R9T
Rizoma Licensholder Fox
CB11227.1M
/ RS0
From
€268.00*
The Rizoma label carrier "FOX" with or without taillight. is the absolute classic in the motorcycle industry for years and convinces without many words through its sophisticated adjustment system and perfectly developed construction. The rear of the BMW R nineT will be significantly shorter and sporty and tidier.
The scope of delivery includes: license plate plates, license plate light, bracket for Rizoma indicator, reflector, rear underfloor. The turn signal or turn signal / taillight combination can either be attached to the license plate with the included turn signal holders or two holes are drilled into the sub-trim. For the variant without taillight, a turn signal / taillight combination must be installed.
Heavy Duty Rear Fender LC
CB11293M
/ RS3
From
€224.95*
This Alu Rear Fender for Bonneville and Street models.
The Fender is made of thick, high-quality aluminum and can be screwed on to Bonneville T100 + T120 and all street models. It replaces the chunky and long original fender.
Turn signal holders, license plate, taillights and turn signals must be ordered seperatly. Or order her the Raisch Alu Fender Kit.
The mudguard can also be ordered in black coated. For this, please order under accessories the supplemental license extra black mudguard (extra charge: 30 €)
Raisch Alu Rear Fender Kit
CB11296M
/ RS0
From
€224.95*
The aluminium rear fender kit gives every Bonneville (T100 & T120) and all Street models (StreetTwin, StreetCup & StreetScrambler) the right old-school look.
Since almost no one likes the huge original traffic light system (tail light & turn signals), but many don't want to do without a nice, classic wing, there is the Raisch Rear Fender Kit. The wing is made of solid, high-quality aluminium and is plug & play with brackets to screw on. You only have to drill holes for the rear light and the number plate holder (there is also a version with 3 holes for the Eldorado rear light / version: black pre-drilled for Eldorado).The shape of the mudguard is much nicer and also a good deal shorter than the original one.
Indicator holder: There are 4 different options to choose from. The version with the turn signals on the inside of the suspension strut is not legal (but looks the best in our opinion).You can order a set of indicator holders directly below the description.
Number plate holder: Here again you have a choice of 4 versions. Central number plate holder: 1. "Number plate holder - Eldorado rear light" the number plate sits on the rear light above the mudguard / 2. "Number plate holder universal" the holder is attached below the mudguard to the screws for the rear light.Side number plate holder: The rear kit can also be combined with a side number plate holder, which makes for a very clean and beautiful look in the rear area. Here we have one that goes on the swingarm and one that goes on the rear shock. Both are not approved.
Turn signals: You can also order beautiful accessory turn signals below the description.
Rear light: We have tested several rear lights and the Eldorado is best for the mudguard! This is also a very high quality aluminium tail light with LED technology.
Other accessories:
Cable set: This is definitely needed if you don't want to cut anything off the original cable harness. Licence plate screw set: If you want to fix your licence plate with suitably coloured screws, you can order a set as well.Reflector: If you want to have a 100% legal rear end, you have to mount a reflector.
License plate holder Horst adjustable
CB11406
/ RS3
€74.95*
The license plate holder model Horst is an angle adjustable bracket for mounting on the fender. Includes license plate illumination and turn signal mount on the holder (suitable for all turn signals with M6 & M8 thread). Concentrator Holder Horst is the optimal license plate holder for anyone who wants to build a shorter fender on his motorcycle and does not want the license plate to hang down like a rat's tail on the fender. Because here the KZ is screwed directly onto the fender, through the adjustment the license plate remains recognizable even from behind.
In the photo with the arrow you can see how the adjustment works. This allows the holder to be used universally for each fender rounding and length.
In the photos you can see as an example, how we used the holder for the rear modification on a Bonneville.
Dimensions of the license plate: width 177mm / length 165mm
LED Stripe Tail Tidy BMW R9T
CB12076M
/ RS-10
From
€309.00*
Classicbike-Raisch LED Stripe rear suitable for all BMW R nineT models. Street legal!
The LED Stripe rear is the most noble & elegant rear for nineT models that we have in our range.The rear of your nineT is given a minimalist & modern look with this kit, through the filigree milling bracket and the modern LED strip & completely legal! The tail light with breaklight is with E-number and the tail complies with all StvO standards. Here nothing needs to be registered with the TÜV. Simply attach & enjoy.
The LED bracket milled from aluminum fits perfectly to all BMW original seats as well as the BMW hump. A perfect fit on all seat benches is guaranteed by the spacer kit, which is included. This kit contains different spacers to distance the height of the milling bracket perfectly to the respective installed seat. The kit of course also works with numerous seat benches from the accessories, such as the Cool Seat from our range.Also with the passenger pillion frame everything fits perfectly.
The bracket for the LED strip is milled from an aluminum block in Germany and then anodized deep black. The LED strip (with E-number) is then glued into the milling bracket. This makes the part look like it was cast from one piece.
Included in the kit is an aluminum underbody plate, which replaces the original plastic shell. For the R nineT Euro 4 & 5 models, the plastic box for the control unit is also replaced. This is unsightly on the one hand because it is made of plastic and on the other hand because it builds up very low and thus disturbs the line of the rear area. Through the new aluminum sheet you no longer look from the side on the edge of the box & the rear gets a perfect line.
The scope of delivery includes all materials, such as screws, cable ties, heat shrink tubing, connectors, etc., as well as a very detailed step by step instructions to ensure easy & problem-free installation.
To buy the kit reduced in the set, simply below the description, the accessory items such as turn signals, reduced order.
License plate holder: The kit is delivered WITHOUT a license plate holder.
Since the kit looks just awesome with both a central and a side license plate holder! Our recommendations:Variant 1: License plate holder HeckWeck R9T / This holder is mounted centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant does NOT need to be registered). This is the holder, which is also mounted on some product photos.Variant 2: License plate holder HeckWeck R9T - Short / This holder is mounted as in variant 1 centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant must NOT be registered). The difference to variant 1 is that the short version is much shorter and has an adjustment for the angle of the license plate. This allows us to mount the license plate significantly shorter (steeper than 30 °) but for TÜV or controls within a handle to be able to put down to 30°.
Variant 3 Side license plate holder:There are 4 different holders to choose from: 1. the Vario holder: an inexpensive (but still very high quality) holder reduced to the bare essentials (the most inconspicuous of all), which fits all license plate sizes and is variably adjustable in position - must be registered individually.2. the Rizoma holder: Probably the highest quality holder of all. This holder is supplied with a parts certificate and can simply be fitted (does not have to be registered with the TÜV).3. the adjustable bracket: A sophisticated bracket with an aluminum license plate, which also has variable adjustment. Must also be registered by individual approval. 4. The AC-Schnitzer holder: A license plate holder milled from solid material with parts certificate.
Turn signal:
In the milling bracket is on both sides a 8er bore, this allows it to mount any turn signal with an M8 thread. He is held turn signal by a grub screw, which is included.Who does not want to mount a turn signal on the bracket, which can order the turn signal plugs (further down in this description). These then serve as blind plugs for the turn signal hole.
Further down in this description you can order all, to the rear matching turn signals, from our range in the bundle. In the bundle you will automatically be granted a discount of 10% on all turn signals.
Accessories:
Classicbike-Raisch recommends for easier installation still turn signal plugs & tail light plugs.For all those who want to be 100% legal on the road, there is still a reflector as an accessory.To mount the license plate, we recommend the license plate screw set.
All parts you can order below in the description with it.
To buy the kit reduced in a set click on the button "buy this item in a set" above under shopping cart
Luggage:The LED bracket goes to the same mounting points as most luggage systems. Together with the LED stripe rear, the Unit Garage bags can be mounted.
Note on the BMW alarm system: Our base plate does not have any fixing points for the alarm system. If you would still like to have it installed, we recommend attaching the alarm system with double-sided adhesive tape.