Cover / Covers / Emblems

Please choose your bike

New

Frame plate BMW R12 CB12805 / RS

BMW R12 The Line Frame Plates Set. These beautiful plates, milled from aluminium and with a discreet bmw logo, replace the original plastic emblems on the frame of your BMW R12 / R12 nineT. The Line emblems are anodised in black and then a very fine milling head is used to mill the The Line design, which is then discreetly visible in silver. Matching tank emblems are also available for the BMW in the same design (see accessories in this product description). The set consists of one plate for the left and one for the right side.

€69.90*

BMW Tankemblem - The Line CB12685 / RS0

This BMW tank emblem milled from aluminum is just the thing for all BMW drivers who like it black and beautifully simple! The subtly suggested BMW propeller and the finely milled BMW lettering look very elegant. Attention!The emblems are sold individually The original emblems on the tank are glued on and can be carefully removed.The new black emblems have double-sided adhesive on the back and can therefore be easily attached to the motorcycle. Classicbike-Raisch tip: We also offer matching brake/clutch reservoir covers in "The Line" design. These can be found under accessories for this product. The emblems are available separately. Diameter tank emblem: 70mm

€24.95*

BMW Milled - Black Emblem CB12582.1M / RS0

This BMW tank & seat hump emblem milled from aluminum is just right for all BMW riders who like it black true to the motto Black is beautiful. The original emblems on the tank and on the hump are glued and can be carefully removed.The new black emblems have a double-sided adhesive on the back, which makes them very easy to attach to the motorcycle. The emblems are sold individually. Diameter tank emblem: 70mm / Diameter hump emblem: 26mm

From €17.95*

Details

Fork Caps - BMW Milled CB12457M / RS0

A pair of CNC machined aluminum caps for all BMW R nineT models with Tele fork. Matching our BMW Milled series, there are now also the fork crown caps. These replace the rather simple silver caps on the R9T fork. The caps are easily replaced within a few minutes against the original. To install the fork does not have to be removed (it must only be relieved, for example, in which the motorcycle is jacked up, or pulled by a second man on the side stand) and no special tools are needed. An assembly instruction is included in the delivery, The Milled caps are manufactured in a very noble Black Pearl surface. That is, they are blasted before the black anodize, Glasperenl. This gives its very fine, slightly matte surface which feels and looks very high quality. Classicbike-Raisch recommendation: Order the plastic tool as well, with which it is very easy to fit the Milled caps without scratches and scratches (see accessory article in this description).

From €89.95*

Details

Steering head nut cover CNC Milled CB12370.2M / RS0

CNC machined aluminum cover for the steering head nut of all BMW R nineT models. The original Lemkkopf nut of the R9T's is not exactly beautiful. To replace this is quite costly, because the handlebars must be disassembled for this. So we offer you here a very chic and practical cover. It is simply plugged over the steering head nut and covers this completely. The cover is put on it within seconds or pulled off again. The Milled design of the steering head cover is the same as our other Milled Producten (tank emblems, brake reservoir cover ...)

From €59.95*

Details

Radiator grille - R9T CB12388 / RS0

Classicbike-Raisch aluminum protective grille for the oil cooler of all BMW R nineT models.Made in Germany! The protective grille serves two purposes.First and foremost, it protects the radiator from rough stone chips, which is especially important if you are also a bit off road.In addition, the grille also looks visually nicer, and hints at the BMW logo.Due to the many slots, sufficient cooling is guaranteed. The grid is made of aluminum and is laser cut and edged by hand in our region. Subsequently, the Gitte is coated black powder.

€79.95*

Fork Covers with Indicators R9T CB12096M / RS0

A pair of aluminium standpipe covers with integrated LED turn signals for BMW R nineT. These very high-quality fork covers ensure that the mismatching chrome on the fork disappears and that the fork appears thicker (like an upside down fork). In addition, tiny LED turn signals are integrated into the covers. This does away with the large original turn signals and gives the nineT a really nice clean front.The turn signals are E-numbered and also comply with the prescribed minimum distance (so they are Stvo compliant and legal). The tubes are elaborately turned on a CNC lathe, have guides for the cables and rubber rings milled into them from the inside. On the outside they have a small flat surface on which the mini LED turn signals are mounted.After that, the covers are glass bead blasted and then anodised either silver or black. This gives the covers a very high-quality matt finish. The covers are supplied with detailed step-by-step assembly instructions, cable solder connectors, heat shrink tubing and resistors (which are required for some models) Note Scrambler / Urban GS cover:The indicators on these covers are now mounted horizontally to make them even more inconspicuous.

From €179.95*

Details

Frame batch BMW R nine T CB11971M / RS0

Aluminium frame batch with nineT or R-Logo lettering for the passenger frame on all BMW R nine T models. Many people drive their R9T without pillion frame and have the two threads open on the right & left side.Therefore we designed two nice badges which are mounted on this place.Matching black screws are including.

From €24.95*

Details

Reflector Cover - BMW CB11931M / RS0

Covers for the original reflectors on the forks of all BMW R nine T & R12 models As with all motorcycles since the Euro 4 standard, reflectors are also glued to the forks of the BMW models. It looks absolutely awful, but unfortunately it's mandatory. We have a chic solution here that covers the reflectors but can also be removed at any time. Our high-quality aluminum covers give your motorcycle a classy and individual look. They not only enhance the look, but also integrate seamlessly into the design of your machine. Easy installation: The covers are simply put over the existing reflectors and fixed with a grub screw on the underside. Installed in just a few seconds and removed just as quickly – with no effort at all. Three stylish options to choose from: Silver: Raw aluminum that you can either leave as is or polish to a shine. For the perfect finish, we recommend the Motul aluminum polish (see accessories). Black: Completely black anodized aluminum for a subtle, elegant look. Black with contrasting milling: Black anodized and subsequently milled for a special accent that attracts attention. Scope of delivery: The covers are delivered as a pair.

From €59.95*

Details

R9T axle cover classic CB11375M / RS0

Rizoma axle cover made of billet aluminum of the highest quality (as known from Rizoma). The cover serves as a protection. the hub. Much more is the cover but an eye-catcher from the original rim makes a visually really cool oldschool rim.

From €205.00*

Details

Oil filler cap Rizoma CB11247M / RS0

Rizoma oil filler cap made of billet aluminum (highest quality & workmanship). A key is required to be opened (included) so that the lid can not be stolen.

From €68.00*

Details

Rizoma hub cover CNC CB11249M / RS0

The Rizoma hub cover replaces the original, quite simple plastic rings. Due to the milled aluminum rings the rim gets a much more chic look. Because just the rear wheel rim with the Einarmschwinge, is indeed an eyecatcher with the R9T. Due to the two different colors black or silver, a very nice contrast can be placed, which makes the caps particularly eye-catching. The cover is only available in black as long as stocks last.

€235.00*

Details

Fork covers R9T CB11179.7 / RS1

Model: R9T Urban GS | Colour: Black

A pair of Gaeblrohr covers made of lightweight aluminum in black powder coated or silver anodised. Through the cover, the fork looks much more massive (because it seems wider), which makes the fork look significantly higher quality and ensures a lasting better look. The tubes are supplied as a plug & play solution with rubber rings and installation instructions. Fits on the Urban GS only when the indicators on the fork are turned off.

Variants from €67.90*

€74.90*

Cooler grid CB12273 / RS10

Aluminum lasered protective grille for the oil cooler of all BMW R nineT models from the brand Unit Garage from Italy. The protective grille serves two purposes.First and foremost, it protects the radiator from rough stone chips, which is especially important if you are also a bit off road.In addition, the grid also looks visually nicer than honeycomb structure of the original oil cooler. The grid is made of aluminum and anodized black.

€93.95*

Air Intake Cover - Titanium CB12478.1M / RS600

A pair of titanium covers for the rubber intake hose of all BMW R nineT models. The covers are quick and easy to fit. They are simply pushed over the intake rubber and then hold in place. In the titanium version, with visible welds, an absolute eye-catcher! Handmade in Italy.

From €265.00*

Details

Grid intake manifold CB12369 / RS600

Aluminum grille + ring for the intake manifold of all BMW R nineT models. The Gitte provides a more beautiful / harmonious finish of the original air intake manifold on the nineT models. No drilling or similar is necessary for mounting.

€169.95*

Intake manifold cover CB12274 / RS600

A pair of stainless steel covers for the rubber intake hose of all BMW R nineT models. The covers are mounted very easily and quickly. They are simply pushed over the intake rubber and then hold already.

€209.95*

Rizoma Kardanwellen Abdeckung CB12209.1M / RS600

Eine CNC gefräste Abdeckung für den Kardan Antrieb der BMW R nineT Modelle.

€50.50*

Details

Cover caps set BMW R9T frame CB12062M / RS600

CNC FRAME CAP Set, 2-piece or 7-piece suitable for all BMW R nineT models. ATTENTION: From model year 2016, the frame has been changed on some models. As a result, the cover cap (vehicle side viewed from the left) top right (above the cylinder head- injector) does not fit! (SEE PHOTO) The black anodized aluminum caps cover the frame holes of the BMW RnineT. Combined with polished bevels, these caps stand for a classy, stylish design. Scope of delivery: 1 set, 2-piece1x swingarm closure cap, left1x swingarm closure cap, right Scope of delivery: 1 set, 7-piece1x swing arm cover, left1x swing arm closing lid, right1x Upper swing arm cover, right2x Lower motor cover, right / left1x Upper motor cover, front1x Upper motor cover, rear

€47.95*

Details

Oil seal screw R9T CB11017 / RS600

CNC machined, molded oil seal screw which looks very noble.

€34.95*

Oil cooler Cover Indicator bracket CB11637 / RS601

Pair of cover caps including 2 stainless steel screws for fastening.The caps cover the turn signal mount on the oil cooler of the R9T models, if you mount the turn signal in another place (for example handlebar ends or under the armatures).

€42.95*