Rear conversion kit / fender eliminator kit for BMW R12 nineT Made in Germany by Classicbike-Raisch Give your BMW R12 nineT a modern and minimalist design with our rear conversion kit, which has been developed legally and in accordance with legal requirements. Depending on the choice of the license plate holder, a TÜV registration may be required. This kit ensures a significantly shorter, tidy rear end and replaces the original long plastic license plate holder. The result: a harmonious, clean motorcycle design with a flat, sporty line. Contents The kit contains everything you need to convert the rear as shown in the pictures: Aluminium rear undertray: Black powder coated, for a straight, flat rear line. It also acts as a splash guard and provides space for electronic components under the seat. Black powder coated turn signal brackets: Suitable for all accessory turn signals with M8 thread.(Note: Original turn signals cannot be used. M5 to M8 adapters are required for Kellermann Atto turn signals.) 3D-printed brackets: For secure mounting of fuses and connectors under the seat. Mounting materials: Including rubber sleeves for clean cable routing. Installation instructions: For easy plug-and-play installation. Necessary accessories To use the kit to its full extent, you need the following components: Turn signals The original turn signals are not compatible. Accessory turn signals with an M8 thread must be installed. Suitable models can be ordered directly under the product description (incl. 10% discount). Recommendations: Motogadget Pin / Tens Motone Pico Kellermann Atto (M5-to-M8 adapter required) Rizoma Club / Leggera Side licence plate holder The original licence plate holder is removed. A side licence plate holder is required and can also be ordered directly as a set. You have the choice between four variants: Vario holder: Minimalist, inexpensive and variably adjustable, suitable for all licence plate sizes.(Requires individual approval by the TÜV.) Rizoma holder: High quality option with parts certificate, no TÜV entry required. Adjustable holder: With aluminium licence plate plate and variable adjustment.(Requires individual TÜV approval.) AC Schnitzer holder: CNC-milled with parts certificate. Optional accessories Complete your conversion kit with these practical extras: Indicator plug: Simplifies the wiring of the accessory indicators on the original wiring harness. Indicator thread caps: For a clean look over the nuts of the indicators. Reflector: For 100% road approval, can be mounted under the licence plate. Number plate screws: For secure and aesthetic mounting.   Conclusion Our rear conversion kit for the BMW R12 nineT transforms your motorbike into a real eye-catcher. Thanks to high-quality materials, easy assembly and versatile accessories, you can customise your bike while also meeting legal requirements.

Classicbike-Raisch LED Stripe rear suitable for all BMW R nineT models. Street legal! The LED Stripe rear is the most noble & elegant rear for nineT models that we have in our range.The rear of your nineT is given a minimalist & modern look with this kit, through the filigree milling bracket and the modern LED strip & completely legal! The tail light with breaklight is with E-number and the tail complies with all StvO standards. Here nothing needs to be registered with the TÜV. Simply attach & enjoy. The LED bracket milled from aluminum fits perfectly to all BMW original seats as well as the BMW hump. A perfect fit on all seat benches is guaranteed by the spacer kit, which is included. This kit contains different spacers to distance the height of the milling bracket perfectly to the respective installed seat. The kit of course also works with numerous seat benches from the accessories, such as the Cool Seat from our range.Also with the passenger pillion frame everything fits perfectly. The bracket for the LED strip is milled from an aluminum block in Germany and then anodized deep black. The LED strip (with E-number) is then glued into the milling bracket. This makes the part look like it was cast from one piece. Included in the kit is an aluminum underbody plate, which replaces the original plastic shell. For the R nineT Euro 4 & 5 models, the plastic box for the control unit is also replaced. This is unsightly on the one hand because it is made of plastic and on the other hand because it builds up very low and thus disturbs the line of the rear area. Through the new aluminum sheet you no longer look from the side on the edge of the box & the rear gets a perfect line. The scope of delivery includes all materials, such as screws, cable ties, heat shrink tubing, connectors, etc., as well as a very detailed step by step instructions to ensure easy & problem-free installation. To buy the kit reduced in the set, simply below the description, the accessory items such as turn signals, reduced order. License plate holder: The kit is delivered WITHOUT a license plate holder. Since the kit looks just awesome with both a central and a side license plate holder! Our recommendations:Variant 1: License plate holder HeckWeck R9T / This holder is mounted centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant does NOT need to be registered). This is the holder, which is also mounted on some product photos.Variant 2: License plate holder HeckWeck R9T - Short / This holder is mounted as in variant 1 centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant must NOT be registered). The difference to variant 1 is that the short version is much shorter and has an adjustment for the angle of the license plate. This allows us to mount the license plate significantly shorter (steeper than 30 °) but for TÜV or controls within a handle to be able to put down to 30°. Variant 3 Side license plate holder:There are 4 different holders to choose from: 1. the Vario holder: an inexpensive (but still very high quality) holder reduced to the bare essentials (the most inconspicuous of all), which fits all license plate sizes and is variably adjustable in position - must be registered individually.2. the Rizoma holder: Probably the highest quality holder of all. This holder is supplied with a parts certificate and can simply be fitted (does not have to be registered with the TÜV).3. the adjustable bracket: A sophisticated bracket with an aluminum license plate, which also has variable adjustment. Must also be registered by individual approval. 4. The AC-Schnitzer holder: A license plate holder milled from solid material with parts certificate.   Turn signal: In the milling bracket is on both sides a 8er bore, this allows it to mount any turn signal with an M8 thread. He is held turn signal by a grub screw, which is included.Who does not want to mount a turn signal on the bracket, which can order the turn signal plugs (further down in this description). These then serve as blind plugs for the turn signal hole. Further down in this description you can order all, to the rear matching turn signals, from our range in the bundle. In the bundle you will automatically be granted a discount of 10% on all turn signals. Accessories: Classicbike-Raisch recommends for easier installation still turn signal plugs & tail light plugs.For all those who want to be 100% legal on the road, there is still a reflector as an accessory.To mount the license plate, we recommend the license plate screw set. All parts you can order below in the description with it. To buy the kit reduced in a set click on the button "buy this item in a set" above under shopping cart  Luggage:The LED bracket goes to the same mounting points as most luggage systems. Together with the LED stripe rear, the Unit Garage bags can be mounted. Note on the BMW alarm system: Our base plate does not have any fixing points for the alarm system. If you would still like to have it installed, we recommend attaching the alarm system with double-sided adhesive tape.

Classicbike-Raisch HeckWeck Kit SHORT version made in Germany, suitable for all BMW R nineT models. Street legal. All our HeckWeck Kits are very minimalistic rear ends, which make for a really free and clean rear end. Our HeckWeck kits are designed to be fitted with 3-1 turn signals. This means that the turn signals, tail light, brake light and indicator are integrated at the same time. For mounting the turn signals, an indicator holder is included, which sits on the number plate. This is variably adjustable in width in order to have the perfect dimension depending on the width of the number plate and the turn signals. Matching 3-1 turn signals can be ordered as a set below the description with a 10% discount. In order to be able to legally realise the short number plate holder, we had to reach into the bag of tricks a little. Due to the short rear end of the R9T motorbikes, it is not possible to construct a licence plate holder that adheres to the specified 30° angle and at the same time ensures that the licence plate does not make contact with the rear wheel when the motorbike compresses really hard. So we came up with an ingenious adjustment for the number plate that makes it possible to adjust the angle of the number plate.This allows the number plate to be set a little steeper in continuous operation, which of course also looks more attractive. For the TÜV visit or a traffic control, a quick grip with a little force on the number plate is enough and everything is legal. See pictures 2 & 3.The stop nuts supplied with the kit ensure that the number plate cannot be moved unintentionally while driving. Included in the kit is an aluminium underbody plate, which replaces the original plastic shell. For the R nineT Euro 4 & 5 models, the plastic box for the control unit is also replaced. This is unsightly on the one hand because it is made of plastic and on the other hand because it is very low and therefore disturbs the line of the rear area. With the new aluminium sheet you don't have to look at the edge of the box from the side anymore & the rear gets a perfect line.   Accessories: Classicbike-Raisch recommends the "R9T cable set for tail light/indicator combination" for easier installation. This allows you to easily connect the 3-1 turn signals without having to cut anything off the wiring harness.  For all those who want to be 100% legal on the road, there is also a reflector in the accessories. To mount the number plate, we recommend the number plate screw set. All parts can be ordered as a set below the description.   Scope of delivery: Licence plate holder (suitable small size for all motorbike licence plates in the world)  LED number plate light Indicator holder vario (the width can be adjusted individually depending on the number plate and indicator length) All mounting materials Accessories mounting material such as heat shrink tubing, cable ties etc.  Detailed assembly instructions

Classicbike-Raisch HeckWeck Kit made in Germany, suitable for all BMW R nineT models. Street legal! All of our HeckWeck Kits are very minimalistic rear ends that make for a really free and clean rear end. Our HeckWeck kits are designed to have 3-1 turn signals. This means that in the turn signals, rear, brake & turn signal light are integrated simultaneously. For mounting the turn signals, a turn signal holder is included, which sits with the license plate. Matching 3-1 turn signals, you can order below the description with 10% discount in the set equal to it. Included in the kit is an aluminum underbody plate, which replaces the original plastic shell. For the R nineT Euro 4 & 5 models, the plastic box for the control unit is also replaced. This is unsightly on the one hand because it is made of plastic and on the other hand because it builds up very low and thus disturbs the line of the rear area. Through the new aluminum sheet you no longer look from the side on the edge of the box & the rear gets a perfect line. Accessories: Classicbike-Raisch recommends the "cable set R9T for taillight / turn signal combination" for easier installation. This allows you to easily connect the 3-1 turn signals without having to cut what on the wiring harness. For all those who want to be 100% legal on the road, there is still a reflector in the accessories. To mount the license plate chic, we recommend the license plate screw set. All parts you can order below the description, in the set with it.   Scope of delivery: License plate holder (165mm x 135mm) LED license plate lighting Turn signal holder All mounting materials Accessories mounting material such as heat shrink tubing, cable ties, etc. Detailed mounting instructions    

GFK Racer Rear suitable for all R9T models gives each R9T a completely new look.We have often been asked if there is a Plug&Play solution to completely change the rear of the R9T. Finally they are here now.The Racer rear is delivered ready to mount, including mounting material and an LED tail light (which is integrated into the rear). The assembly is also relatively simple (see assembly instructions in the downloads of this article description).This rear is made of high quality GFK and is perfect for painting.Not included in the delivery is: the cell rubber seat cushion, a license plate holder (we recommend to use a lateral one to have the nice rear as free as possible), as well as the indicator holder mounted on the photos. But you can find all these things under the accessories in this description.In addition we recommend to order the "adapter plug accessory rear light" for better wiring (also to be found in the accessories). The JVB Moto rear fits perfectly into the design of all JVB Moto things for the BMW R9T series (air tunnel, lamp mask, R9T Racer fairing, front fender).

Passgenaue Rizoma rear lower shell (fits all R9T models). As a result, the original taillight and flag carrier are removed. For anyone who wants to build their own license plate, this signature offers the perfect foundation.

The Rizoma label carrier "FOX" with or without taillight. is the absolute classic in the motorcycle industry for years and convinces without many words through its sophisticated adjustment system and perfectly developed construction. The rear of the BMW R nineT will be significantly shorter and sporty and tidier. The scope of delivery includes: license plate plates, license plate light, bracket for Rizoma indicator, reflector, rear underfloor. The turn signal or turn signal / taillight combination can either be attached to the license plate with the included turn signal holders or two holes are drilled into the sub-trim. For the variant without taillight, a turn signal / taillight combination must be installed.

Short license plate holder for your BMW R12 Cruiser You want to upgrade the rear of your BMW R12 and install small 3-1 LED turn signals? Our high-quality, short license plate holder made of aluminum makes it possible – and without much effort. With this license plate holder, you can give your bike a clean look at the rear. The license plate holder comes with a high-quality LED license plate light (which is significantly smaller than the original). This is already equipped with the appropriate vehicle plug.With our short license plate holder, you have the option of removing the huge original indicators and mounting any small 3-1 accessory indicator with an M8 thread (note: if you want to mount Kellermann Atto indicators, you will also need the M5 to M8 adapters).You can order nice small 3-1 turn signals / rear light combinations with a 10% discount in the set below the description. The original plastic holder looks pretty cheap in comparison, and the bulky, long license plate light plus the oversized reflector? A real style clash! With our elegant license plate holder, your license plate sits much better and blends harmoniously into the overall look of your motorcycle – for a clean and tidy look from behind. Our Classicbike-Raisch license plate holder is made of sturdy aluminum in Germany and finished with a high-quality black powder coating. Everything is pre-assembled and wired by hand in-house, so you can be sure that the quality and appearance are right. That's why we also offer an extended 3-year warranty on the license plate holder. Classicbike-Raisch tip: If you want to be completely legal on the road, unfortunately you can't avoid a reflector. But don't worry, we offer you a slim, unobtrusive alternative to the chunky original. You can easily find it under “Accessories” in this product description. For the perfect attachment of your license plate, we recommend that you order a set of license plate screws at the same time.

AC Schnitzer rear rear fenders with new LED taillight (no backlight) with ABE

GRP rear fender conversion kit including license plate holder, tail light & license plate light (with E-number). Many people want a classic rear mudguard on their nineT. Here is the solution from Unit Garage. A very high quality GRP mudguard that fits with the original seat as well as with all accessory seats from our range. The scope of delivery includes both license plate and blinker holder. Both can, but do not have to be fitted, so this mudguard can also be used with a side license plate holder. There is a suitable plug on the rear light so that the kit can be connected plug & play to the original wiring harness. The white of the cap is the same color (light white) as the Urban GS.

Center plate holder for AC Schnitzer fuet BMW R9T

License plate holder R9T. Made in Germany. Black powdercoated. Very well processed. Due to the processed material, this license plate retains a very good weather resistance and convinces with a long service life. The license plate is made of robust, sturdy material. There is no need to change any trim panels. Very good fit. The angle of inclination can be adjusted without gaps. Two M6 screws with locking nuts and a locking screw ensure a stable hold. The flasher tubes are infinitely variable and are fastened by means of two M4 cap screws and a self-locking nut. The flasher tubes are equipped with a 10.5 mm hole for the turn signals. A floor plate is also included. We supply including new LED taillight as well as a resistor so it works properly

This high-quality license plate holder replaces the ugly original plastic holder on your BMW R nineT.The holder is made partly from steel (the frame) & partly from aluminum (the license plate). The parts are powder-coated black as a finish. This holder is ideal for anyone who wants to keep their original rear light and leave the pillion subframe on the motorcycle. This is because the tubes of the license plate holder perfectly continue the line of the rear pillion frame. In addition, the original rear light and the original indicators can simply be reused. Alternatively, small accessory indicators can also be fitted (we recommend ordering our blinker adapters for optimum installation.) See accessories in this product description).It is also possible to remove the original rear light and equip the motorcycle with 3-1 rear light/indicator combinations. To do this, simply do not fit the supplied license plate and screw the license plate directly to the holder.