Please choose your bike
Exhaust flap control - R9T
CB12732
/ RS0
€119.00*
Determine for yourself what the exhaust flap does and how the exhaust sounds.
You can choose between 3 levels using the switch.1. exhaust flap permanently closed2. exhaust flap works as in standard condition3. exhaust flap permanently open
The exhaust flap closes and opens depending on the engine speed and throttle position in the standard state. This has an influence on the sound and draft.With the flap open, the sound is audibly more powerful, with the flap closed, it is quieter. The engine revs up a little more willingly and with more bite when the flap is open.The loud cold start of the EU5 model can be significantly reduced with the flap closed, which even pleases the neighbors.
Also very interesting for the guys with louder exhaust systems who come into an inspection... with the flap closed, even a loud exhaust becomes rather quiet.
Easy to fit, suitable for all BMW R nineT models.
Mounting material included. Illustrated installation instructions are included!The small control unit is simply inserted between the actuator of the exhaust flap. Plug&Play without cutting cables, soldering, crimping or similar.
The switch can be simply screwed onto the handlebar area using the mounting plate supplied or stowed away individually.
Not approved for road traffic.
Unit Garage Exhaust - Low
CB12328M
/ RS0
From
€699.95*
Unit Garage Low exhaust for all BMW R nineT models.
The low exhaust from the company Unit Garage from Italy is a very special exhaust. Because no other muffler is so short! A GP look as it stands in the book.And the whole thing with E-number (road approval). For Swiss customers we can also issue an extra certificate.
The exhausts from Unit Garage are on the one hand very well made and on the other hand sound more than cool, which you would not think at first glance with such a small muffler. But they really do! Really nice throaty, dull bass.We drive the system ourselves on some of our own R nineT's The rear silencers are supplied with removable DB-killer.
Optionally, there is the rear silencer without & with grid (see photos). Advantage with the grille is that you can no longer really see whether the DB killer is installed or not.Also, the exhaust system is available in either stainless steel or titanium. In the titanium version, the beautiful welds, which tarnish easily due to the heat, remain visible.
The exhaust is very light due to the design and provides a weight saving between 3.5 - 6kg (depending on which model you have).
If you want to mount the exhaust on a R nineT without the pillion / subframe, or a machine that does not have an exhaust holder below, you must additionally order the exhaust holder Low (see accessories article in this description).The assembly is the system is very simple and done in a short time.
On request, we can also supply the exhaust system in black ceramic coated.
Classicbike-Raisch tip:
Would you like to turn your exhaust into one with flap control?No problem, simply order our module with which you can control the exhaust flap of your BMW (see accessory article in this product description).
Unit Garage Double Exhaust - Low
CB12329M
/ RS0
From
€1,329.95*
Unit Garage Low double exhaust for all BMW R nineT models that have a bottom exhaust installed from the factory.
The bottom-mounted double exhaust from the company Unit Garage from Italy is a very special exhaust. Because so short and filigree is no other muffler and that as a 2-2 exhaust.And the whole thing with E-number (road approval). For Swiss customers we can also issue an extra certificate.
The exhausts we made of high quality and very light titanium. The beautiful hand drawn welds remain extra visible.
The exhausts from Unit Garage are on the one hand very well made and on the other hand sound more than awesome, which you would not think at first glance with such a small muffler. But they really do! Really nice throaty, dull bassy. The 2-2 exhaust is due to the higher muffler volume of course a bit louder than the 2-1, but is also a tuck muffled again from the soundWe drive the system ourselves on some of our own R nineT's The rear silencers are supplied with removable DB-killer.
Optionally, there is the rear silencer without & with grid (see photos). Advantage with the grid is that you can no longer really see whether the DB killer is installed or not.
The exhaust is very light due to the design and provides a weight saving between 2.9 - 4kg (depending on which model you have).
If you want to mount the exhaust on a R nineT without the pillion / subframe, or a machine that does not have an exhaust holder below, you must additionally order the exhaust holder Low (see accessories article in this description).The assembly is the system is very simple and done in a short time.
On request, we can also supply the exhaust system in black ceramic coated.
Classicbike-Raisch tip:
Would you like to turn your exhaust into one with flap control?No problem, simply order our module with which you can control the exhaust flap of your BMW (see accessory article in this product description).
Unit Garage R9T Scram / Urban Exhaust - High
CB12330M
/ RS0
From
€999.95*
Unit Garage High 2-1 exhaust system for all BMW R nineT models that already have an overhead exhaust from the factory.
The overhead 2-1 exhaust of the company Unit Garage from Italy is probably the most radical exhaust for the BMW R nineT series. The short, overhead muffler in GP style, makes for a really free rear end. So short that the rear area remains beautifully free and visible and so far up that the beautiful rim of the R9T is properly visible. Grade in the version with grille is the exhaust in our eyes clearly the hottest for any scrambler and for anyone who wants to have an aggressive tail on his R nineT. We have mounted the exhaust ourselves on our own Scrambler & Pure.
And the whole thing with E-number (road approval). For Swiss customers we can also issue an extra certificate.
The exhausts from Unit Garage are on the one hand very well made and on the other hand also sound more than cool, which you would not think at first glance with such a small muffler. But they really do! Really nice throaty, dull bass.
The rear silencers are supplied with removable DB killer.
Optionally, there is the rear silencer without & with grid (see photos). Advantage with the grid is in addition to the optical aspect that you can no longer really see whether the DB killer is installed or not.The exhaust system is available in stainless steel or titanium. In the titanium version, the beautiful welds, which tarnish due to the heat, remain visible. In addition, the titanium version is slightly lighter.
The exhaust is very light due to its design and provides a weight saving of 2.8kg.
Who wants to mount the exhaust on a R nineT without the pillion / subframe, which must order an additional exhaust holder.Here there are two different to choose from(see accessories article in this description).Classicbike-Raisch Tip: Who drives his Scrambler or Urban GS permanently without subframe and also no longer intends to mount this, we recommend the Unit Garage High exhaust system to order, because this has the nicer holder (see similar articles in this description).
The assembly is the system is very simple and done in a short time.
On request we can also supply the exhaust system in black ceramic coated.
Classicbike-Raisch tip:
Would you like to turn your exhaust into one with flap control?No problem, simply order our module with which you can control the exhaust flap of your BMW (see accessory article in this product description).
Unit Garage R9T Exhaust - High
CB12333M
/ RS0
From
€1,029.95*
Unit Garage High 2-1 exhaust system for all BMW R nineT models.The 2-1 High exhaust, fits if the original pillion / subframe is installed, on all models that have a factory lower exhaust. If the original subframe is removed and replaced with the Unit Garage bracket (must be purchased separately), then this exhaust will also fit the models that have a factory mounted overhead exhaust.
The overhead 2-1 exhaust from Unit Garage in Italy is probably the most radical exhaust for the BMW R nineT series. The short, overhead muffler in GP style, makes for a really free rear end. So short that the rear area remains beautifully free and visible and so far up that the beautiful rim of the R9T is properly visible. Grade in the version with grille is the exhaust in our eyes clearly the hottest for any scrambler and for anyone who wants to have an aggressive tail on his R nineT. We have mounted the exhaust ourselves on our own Scrambler & Pure.
And the whole thing with E-number (road approval). For Swiss customers we can also issue an extra certificate.
The exhausts from Unit Garage are on the one hand very well made and on the other hand also sound more than cool, which you would not think at first glance with such a small muffler. But they really do! Really nice throaty, dull bass.
The rear silencers are supplied with removable DB killer.
Optionally, there is the rear silencer without & with grid (see photos). Advantage with the grid is in addition to the optical aspect that you can no longer really see whether the DB killer is installed or not.The exhaust system is available in stainless steel or titanium. In the titanium version, the sore welds, which tarnish slightly due to the heat, remain visible. In addition, the titanium version is somewhat lighter.
Optionally, there is a carbon heat shield for the exhaust. You can find it under the accessories in this description.
The exhaust is very light and provides a weight saving of 2.8kg - 4.7kg.
Who wants to mount the exhaust on a R nineT without the pillion / subframe, which must order an additional exhaust holder (see accessories articles in this description).
The assembly is the system is very simple and done in a short time.
On request, we can also supply the exhaust system in black ceramic coated.
Classicbike-Raisch tip:
Would you like to turn your exhaust into one with flap control?No problem, simply order our module with which you can control the exhaust flap of your BMW (see accessory article in this product description).
Unit Garage R9T Scram / Urban Double Exhaust - High
CB12335M
/ RS0
From
€1,669.95*
Unit Garage High 2-2 titanium exhaust system for all BMW R nineT models that already have an overhead exhaust from the factory (who has an Urban GS with bottom-mounted exhaust, which must order the Unit Garage exhaust High CB12333). Also suitable for all models that are driven without pillion / subframe and with additional holder.
The overhead 2-2 exhaust of the company Unit Garage from Italy is probably the most radical exhaust for the BMW R nineT series. The short, overhead double mufflers from Unit Garage really make a statement. Not quite as inconspicuous and discreet as the 2-1 exhaust, but still very minimalist and aggressive in appearance.
Grade in the version with grille is the exhaust in our eyes clearly the hottest for any scrambler and for anyone who wants to have an aggressive tail on his R nineT.
And the whole thing with E-number (road approval). For Swiss customers we can also issue an extra certificate.
The exhausts from Unit Garage are on the one hand very well made and on the other hand also sound more than cool, which you would not think at first glance with such a small muffler. But they really do! Really nice throaty, dull bassy. The 2-2 exhaust is due to the higher muffler volume of course a little quieter than the 2-1, but is also again a tuck muffled by the sound
The rear mufflers are supplied with removable DB-killer. The good thing about the Unit Garage DB-killers is that these are not like most other manufacturers at the exhaust end, but at the very beginning. This makes the exhaust look nice and open and empty.
Optionally, there is the rear muffler without & with grid (see photos). Advantage with the grid is in addition to the optical aspect that you can no longer really see whether the DB killer is installed or not.The exhaust manifold is handmade from titanium. The beautiful seams created during welding remain extra visible.
The exhaust is very light due to its design and provides a weight saving of 3.1kg.
Who wants to mount the exhaust on a R nineT without the pillion / subframe, which must order an additional exhaust holder.Here there are two different to choose from (see accessories article in this description).
The assembly is the system is very simple and done in a short time.
On request, we can also supply the exhaust system in black ceramic coated.
Classicbike-Raisch tip:
Would you like to turn your exhaust into one with flap control?No problem, simply order our module with which you can control the exhaust flap of your BMW (see accessory article in this product description).
Unit Garage R9T Double Exhaust - High
CB12336M
/ RS0
From
€1,669.95*
Unit Garage High 2-2 titanium exhaust system for all BMW R nineT models that have a bottom-mounted exhaust installed from the factory.Who wants to ride the exhaust without the pillion / subframe, which can buy the Unit Garage double exhaust Scrambler / Urbans GS - High (CB12335).
The overhead 2-2 exhaust of the company Unit Garage from Italy is probably the most radical exhaust for the BMW R nineT series. The short, overhead double mufflers from Unit Garage really make a statement. Not quite as inconspicuous and discreet as the 2-1 exhaust, but still very minimalist and aggressive in appearance.
Grade in the version with grille is the exhaust in our eyes clearly the hottest for any scrambler and for anyone who wants to have an aggressive tail on his R nineT.
And the whole thing with E-number (road approval). For Swiss customers we can also issue an extra certificate.
The exhausts from Unit Garage are on the one hand very well made and on the other hand also sound more than cool, which you would not think at first glance with such a small muffler. But they really do! Really nice throaty, dull bassy. The 2-2 exhaust is due to the higher muffler volume of course a little quieter than the 2-1, but is also again a tuck muffled by the sound
The rear mufflers are supplied with removable DB-killer. The good thing about the Unit Garage DB-killers is that these are not like most other manufacturers at the exhaust end, but at the very beginning. This makes the exhaust look nice and open and empty.
Optionally, there is the muffler without & with grid (see photos). Advantage with the grid is in addition to the optical aspect that you can no longer really see whether the DB killer is installed or not.The exhaust manifold is handmade from titanium. The beautiful seams created during welding remain extra visible.
The exhaust is very light by design and provides a weight saving of 3.1kg.
The assembly is the system is very simple and done in a short time.
On request, we can also supply the exhaust system in black ceramic coated.
Unit Garage Exhaust - Low
CB12409M
/ RS0
From
€799.95*
Unit Garage Low exhaust for all BMW R nineT models.
The low exhaust from the company Unit Garage from Italy is a very special exhaust. Because no other muffler is so short! A GP look as it stands in the book.And the whole thing with E-number (road approval). For Swiss customers we can also issue an extra certificate.
The exhausts from Unit Garage are on the one hand very well made and on the other hand sound more than cool, which you would not think at first glance with such a small muffler. But they really do! Really nice throaty, dull bass.We drive the system ourselves on some of our own R nineT's The rear silencers are supplied with removable DB-killer.
Optionally, there is the rear silencer without & with grid (see photos). Advantage with the grille is that you can no longer really see whether the DB killer is installed or not.Also, the exhaust system is available in either stainless steel or titanium. In the titanium version, the beautiful welds, which tarnish easily due to the heat, remain visible.
The exhaust is very light due to the design and provides a weight saving between 3.5 - 6kg (depending on which model you have).
If you want to mount the exhaust on a R nineT without the pillion / subframe, or a machine that does not have an exhaust holder below, you must additionally order the exhaust holder Low (see accessories article in this description).The assembly is the system is very simple and done in a short time.
On request, we can also supply the exhaust system in black ceramic coated.
Exhaust end caps Rizoma R9TScrambler
CB11238
/ RS0
€135.00*
The Rizoma exhaust caps make the chic original ones something special. Due to the coloring effect of silver and black, it just seems more lively. Since the sound is enough for most drivers, these caps are just the right thing if they want to give the exhaust a more stylish look.
Installation is simple and fast.
Exhaust Wrap creme
CB00022
/ RS0
€99.90*
Exhaust tape Thermo Tec for the ultimate look. Qualitatively the best, because there are some cheap products on the market that are flammable when they come into contact with gasoline. In addition to the anti-chome look, there is the pleasant side effect of directing more exhaust heat where it belongs, to the rear of the muffler. The radiated heat means the engine doesn't heat up as much.
15 meters long & 5 cm wide. That's enough for two manifolds. Two non-rusting clamps for fastening are included. The manifold does not need to be removed for installation.
The exhaust tape may fade a little over time (i.e. due to heat, wetness, etc.). Especially with the cream-colored exhaust tape results in a really cool oldschool used look when it fades and then becomes schmutzg by using it and it has different shades. That's how it has to look!
Exhaust Wrap black
CB00023
/ RS0
€92.90*
Exhaust tape Thermo Tec for the ultimate look. Qualitatively the best, because there are some cheap products on the market that are flammable when they come into contact with gasoline. In addition to the anti-chome look, there is the pleasant side effect of directing more exhaust heat where it belongs, to the rear of the muffler. The radiated heat means the engine doesn't heat up as much.
15 meters long & 5 cm wide. That's enough for two manifolds. Two non-rusting clamps for fastening are included. The manifold does not need to be removed for installation.
The exhaust tape may fade a little over time (i.e. due to heat, wetness, etc.). Especially with the cream-colored exhaust tape results in a really cool oldschool used look when it fades and then becomes schmutzg by using it and it has different shades. That's how it has to look!
Classicbike-Raisch recommendation: Who would like to have the tape as long as possible black, we recommend a can of exhaust paint (see accessory article in this description) to order. With this you can spray the finished wrapped manifold then. This will keep the tape black much longer.
Exhaust Wrap copper
CB11515
/ RS0
€99.90*
Exhaust tape Thermo Tec for the ultimate look. Qualitatively the only true, because there are some cheap products on the market that can burn when gasoline comes to it. In addition to the anti-chrome look, there is the pleasant side effect that simply more exhaust heat is directed to where it belongs: namely to the rear of the muffler. As a result, the engine is no longer so heated up by the radiated heat. In copper colors for a more eye-catching look. 15 meters long in 5 cm width. That's enough for two manifold. Two non-rusting clamps for mounting are included. The manifold does not need to be removed for installation.
The exhaust tape will naturally fade a bit over time (due to heat, wetness, etc). This gives you a really cool used look over time.
Unit Garage R12 Exhaust - High
CB12747M
/ RS1
From
€1,089.00*
Unit Garage High 2-1 exhaust system for BMW R12 models.The exhaust system simply fits plug & play onto the original exhaust bracket of your BMW.
The 2-1 exhaust from Unit Garage in Italy is probably the most radical exhaust for the BMW R12 series. The short, top-mounted rear silencer in GP style ensures a really free rear end. So short that the rear area remains beautifully free and visible and so high that the beautiful rim of the R12 really comes into its own. We have been fitting & selling the identical exhaust system for the predecessor model R nineT for many years. Visually and qualitatively an absolute highlight.
And all with E-number (road approval). We can also issue a special certificate for Swiss customers (please contact us for this).
The exhausts from Unit Garage are very well made and also sound more than awesome, which you wouldn't think at first glance with such a small silencer. But they really do! Really nice and throaty, muffled bass. The rear silencers are supplied with removable DB killers.If you want even more sound, we recommend the Unit Garage titanium manifold without KAT. As the R12 models are equipped with a very large catalytic converter ex works, which also swallows a lot of noise, the motorcycle cannot get much louder without a different rear silencer.
The exhaust system is available in either stainless steel or titanium. With the titanium version, the beautiful weld seams, which tarnish slightly due to the heat, remain visible. The titanium version is also somewhat lighter.
Due to its design, the exhaust system is very light and results in a weight saving of stainless steel: 1.15 kg / titanium: 1.65 kg.
Installation is very simple and can be completed in a short time.
The exhaust system can also be supplied with a black ceramic coating on request.
Unit Garage R12 Exhaust - Low
CB12748M
/ RS1
From
€779.00*
Unit Garage 2-1 exhaust system for BMW R12 models.The exhaust system simply fits plug & play on the original exhaust bracket of your BMW.
The bottom-mounted exhaust from Unit Garage in Italy is a very special exhaust. Because no other silencer is so short! A GP look as it is written in the book.And the whole thing comes with an E number (road approval). We can also issue an extra certificate for Swiss customers.We have been fitting and selling the identical exhaust system for the predecessor model R nineT for many years. Visually and qualitatively an absolute highlight.
And all with E-number (road approval). We can also issue a special certificate for Swiss customers (please contact us for this).
The exhausts from Unit Garage are very well made and also sound more than awesome, which you wouldn't think at first glance with such a small silencer. But they really do! Really nice and throaty, muffled bass. The rear silencers are supplied with removable DB killers.If you want even more sound, we recommend the Unit Garage titanium manifold without KAT. As the R12 models are equipped with a very large catalytic converter ex works, which also swallows a lot of noise, the motorcycle cannot get much louder without a different rear silencer.
The exhaust system is available in either stainless steel or titanium. With the titanium version, the beautiful weld seams, which tarnish slightly due to the heat, remain visible. The titanium version is also somewhat lighter.
Due to its design, the exhaust system is very light and results in a weight saving of stainless steel: 1.95 kg / titanium: 2.2 kg.
Installation is very simple and can be completed in a short time.
The exhaust system can also be supplied with a black ceramic coating on request.
Unit Garage R12 Exhaust - Short
CB12749
/ RS1
€769.95*
Unit Garage 2-1 titanium silencer in very short Moto Gp style.The exhaust system simply fits plug & play on the original manifold of the R12. The exhaust can also be fitted without the original pillion footrests / exhaust bracket.
The lower exhaust from the Italian company Unit Garage is a very special exhaust. Even shorter than the classic low exhaust from Unit Garage.And the whole thing comes with an E number (road approval). We can also issue an extra certificate for Swiss customers.We have been fitting and selling the identical exhaust system for the predecessor model R nineT for many years. Visually and qualitatively an absolute highlight.
And all with E-number (road approval). We can also issue a special certificate for Swiss customers (please contact us for this).
The exhausts from Unit Garage are very well made and also sound more than awesome, which you wouldn't think at first glance with such a small silencer. But they really do! Really nice and throaty, muffled bass. The rear silencers are supplied with removable DB killers.If you want even more sound, we recommend the Unit Garage titanium manifold without KAT. As the R12 models are equipped with a very large catalytic converter ex works, which also swallows a lot of noise, the motorcycle cannot get much louder without a different rear silencer.
The exhaust system is available in either stainless steel or titanium. With the titanium version, the beautiful weld seams, which tarnish slightly due to the heat, remain visible. The titanium version is also somewhat lighter.
Due to its design, the exhaust system is very light and results in a weight saving of 2.4kg
Installation is very simple and can be completed in a short time.
The exhaust system can also be supplied with a black ceramic coating on request.
Unit Garage R12 Exhaust - Low Double
CB12750M
/ RS1
From
€1,509.00*
Unit Garage High 2-2 double silencer exhaust for BMW R12 models.The exhaust fits easily plug & play on the original exhaust bracket of your BMW.
The bottom-mounted dual exhaust from the Italian company Unit Garage is a slim and beautifully short exhaust in the classic cafe racer look with two exhaust silencers.And the whole thing comes with an E number (road approval). We can also issue an extra certificate for Swiss customers.
And the whole thing with E-number (road approval). We can also issue a special certificate for Swiss customers (please contact us for this).
The exhaust systems from Unit Garage are very well made and also sound more than awesome, which you wouldn't think at first glance with such a small silencer. But they really do! Really nice and throaty, muffled bass. The rear silencers are supplied with removable DB killers.If you want even more sound, we recommend the Unit Garage titanium manifold without KAT. As the R12 models are equipped with a very large catalytic converter ex works, which also swallows a lot of noise, the motorcycle cannot get much louder without a different rear silencer.
The exhaust system is available in either stainless steel or titanium.With the titanium version, the beautiful weld seams, which tarnish slightly due to the heat, remain visible. The titanium version is also somewhat lighter.
Due to its design, the exhaust system is very light and results in a weight saving of stainless steel: 1 kg / titanium: 1.3 kg.
Installation is very simple and can be completed in a short time.
On request, the exhaust system can also be supplied with a black ceramic coating.
Dr. Jekill & Mr. Hyde Exhaust - R9T
CB12607
/ RS1
€1,849.00*
Dr. Jekill & Mr. Hyde exhaust system suitable and legal for all BMW R nineT models.
Dr. Jekill & Mr. Hyde.... Probably the most renowned manufacturer of motorcycle exhaust systems with valve control and road approval.Valve control, what does that mean? All Jekill & Hyde systems are supplied with an electronic exhaust flap that allows the motorcycle to be ridden legally on the road in 3 different sound modes. From quiet to nice bassy loud (the sound for a legal exhaust is really a dream, we have heard it on many bikes).Click on the following link to find out more about the flap control, the sound and the Jekill & Hyde brand:
The Jekill & Hyde flap exhaust systems - click here
The exhaust system for the BMW R9T is available in many different configurations. The photos in our product description are only a small selection of the available variants.You can choose between a black or silver rear silencer, as well as various different end cap designs.The price of the exhaust system varies depending on the configuration. Please configure the exhaust directly at Mr. Jekill & Dr. Hyde in their configurator and send us your configuration so that we can send you an order / offer.
Exhaust configurator - click here
Assembly at Classicbike-Raisch:The manufacturer stipulates that all exhaust systems are installed in specialist workshops to avoid errors during installation.Please contact us by phone or e-mail to book your workshop appointment with us.
Important information on the top-mounted exhaust system:If you want to fit the exhaust to an R nineT that has the exhaust at the bottom ex works, an additional bracket is required. We can of course also order this for you. Please contact us for further information.
Dr. Jekill & Mr. Hyde Exhaust - R9T
CB12608
/ RS1
€1,699.00*
Dr. Jekill & Mr. Hyde exhaust system suitable and legal for all BMW R nineT models.
Dr. Jekill & Mr. Hyde.... Probably the most renowned manufacturer of motorcycle exhaust systems with valve control and road approval.Valve control, what does that mean? All Jekill & Hyde systems are supplied with an electronic exhaust flap that allows the motorcycle to be ridden legally on the road in 3 different sound modes. From quiet to nice bassy loud (the sound for a legal exhaust is really a dream, we have heard it on many bikes).Click on the following link to find out more about the flap control, the sound and the Jekill & Hyde brand:
The Jekill & Hyde flap exhaust systems - click here
The exhaust system for the BMW R9T is available in many different configurations. The photos in our product description are only a small selection of the available variants.You can choose between a black or silver rear silencer, as well as various different end cap designs.The price of the exhaust system varies depending on the configuration. Please configure the exhaust directly at Mr. Jekill & Dr. Hyde in their configurator and send us your configuration so that we can send you an order / offer.
Exhaust configurator - click here
Assembly at Classicbike-Raisch:The manufacturer stipulates that all exhaust systems are installed in specialist workshops to avoid errors during installation.Please contact us by phone or e-mail to book your workshop appointment with us.
Important information on the top-mounted exhaust system:If you want to fit the exhaust to an R nineT that has the exhaust at the bottom ex works, an additional bracket is required. We can of course also order this for you. Please contact us for further information.
Zard racing DB-Killer
CB11523
/ RS1
€64.90*
Raisch racing DB Killer for Zard short exhaust systems. More sound + more performance through more throughput. Approx. 40% larger hole. With our DB Killer there are now 3 sound variants available for the Zard systems. With original DB Killer, with Raisch DB Killer or without. Our DB killers are without ABE. They are supplied in pairs.To be honest, with the original DB-killers you only get a very small sound compared to the standard version. Since most of them do not want to drive without DB-killers, we have made this more open variant. It looks like you have a legal DB-killer in it, but it sounds really good! With these db-killers the Zard systems get the sound they need.
Remus power manifold
CB10655
/ RS1
€709.00*
Remus Performance manifold for R9T & Scrambler without EG / ABE. With lambda connection. After a few KM, a nice discoloration results, which in our opinion looks better like the chrome-plated exhaust manifold.
Without cross tube at the front, which further refined the look. I
N Connection with Powercommander results in a noticeable performance increase of approx. 5-6 HP Weight savings compared to series: approx. 4 KG (calculated with Remus Titan ESD)
Unit Garage Exhaust support - Low
CB12327
/ RS3
€89.95*
This low exhaust holder from Unit Garage from Italy, allows you to mount a low exhaust on your R nineT without having the subframe mounted.In addition, also suitable for the models that have no holder for below provided from the factory.
Suitable for original exhaust, the Unit Garage exhaust systems and other accessories exhaust systems.
Remus Hypercone - R9T
CB12566M
/ RS5
From
€689.00*
Remus STEALTH silencer including connecting pipe suitable for BMW R nineT - Classic - Racer - Urban GS - Pure. The exhaust is WITH E-number / road approval.
Unfortunately, the popular AC Schnitzer Stealth exhaust is no longer available. But the Remus is almost identical (because Remus has manufactured the Stealth silencers).Visually they differ slightly, technically and from the sound they are identical.
The Remus silencers fit visually perfect to all R9T models. The classic and subtle design nestles perfectly in the line of the R nine T. The slim design of the exhaust makes the beautiful rim of the machine nicely visible.
Also sonically, the Remus Hypercone is really first class! With the muffler, the R9T has a throaty, muffled sound that is also not too loud.If the sound is not enough, we recommend the exhaust flap replacement pipe and / or the racing manifold without KAT to order.
Performance-wise, the exhaust ggü the series also offers a slight increase. In addition, it is also significantly lighter than the series Auspüffe.
Made entirely of stainless steel / titanium
Muffled and emotional sound
Great performance
EG ABE (approval)
The scope of delivery includes all parts necessary for the assembly of the product.
Classicbike-Raisch tip:
Would you like to turn your exhaust into one with flap control?No problem, simply order our module with which you can control the exhaust flap of your BMW (see accessory article in this product description).
ComeBack Exhaust System BMW R nineT
CB12452M
/ RS5
From
€1,670.00*
2-1 complete system suitable for all BMW R nineT models.The Comeback exhaust is probably the most unusual exhaust available for the R9T with road approval. Just the thing for all those who like it a little more special and exclusive.
This exhaust system gives your R9T a completely new look and comes with an E-number and road approval.The ComeBack system is a complete system & has catalytic converters installed in both pipes. The elimination of the rear silencer & the original catbox saves a lot of weight.
The system is not just a visual highlight. The exhaust system also ensures that the rear of the R9T is very clean and you have a clear view of the single-sided swingarm and the rim.
The exhaust system is supplied with removable DB killers. So if the exhaust is not loud enough for you, you can simply remove it. The system has a nice rich, muffled sound.
The ComeBack exhaust system is of very high quality and is handmade in Italy.
Weight of the exhaust systemStainless steel: 4.2kgTitanium: 2.5kg
Hot Rod Exhaust System BMW R nineT
CB12462M
/ RS5
From
€1,440.00*
2-2 complete system suitable for all BMW R nineT models in side pipe / hot rod design.
This exhaust system gives your R9T a whole new look and the whole thing with E-number & road approval.The Hot Rod exhaust system is a complete system & has catalytic converters installed in both pipes. By omitting the rear muffler and lighter material, neat weight is saved.
Not only the system itself is a visual highlight. The exhaust system also ensures that the rear area of your R9T is very clean and you get a clear view of the single-sided swingarm and the rim.
The exhaust system comes with removable DB killers. So if the exhaust is not loud enough for you, you can simply remove them. The system has a nice rich muffled sound.
The Hot Rod exhaust system is of very high quality and we handmade in Italy.
BMW R Nine T exhaust flaps replacement pipe
CB11733
/ RS10
€69.95*
Unit Garage exhaust flaps replacement pipe for R nineTThe valve replacement tube replaces the standard valve and the associated automatic sound control. The system always runs open in all speed and rpm ranges. This ensures a richer and more robust sound in every speed range.Note: No road approval.
Remus Slip on - R12
CB12702M
/ RS100
From
€499.95*
The Remus stainless steel exhaust system for the R12 is here. And this time, fortunately, again in the popular stealth design that was previously available for the R nineT. As you would expect from Remus, the exhaust has a very high quality finish and a very good fit. The conversion of the slip-on exhaust is very quick and easy.
Visually, the exhaust gives the nineT a tidier rear area and, above all, the view of the beautiful rim is improved.
The Remus Stealth exhaust doesn't have to hide in terms of sound either. The Remus sounds significantly duller and somewhat throatier than the original.
Power: + 3.1 HPTorque: + 3.2 NMWeight: - 1.28 kg
Listen to the sound! Here you can listen to the sound of the Remus exhaust (at the end the sound of the original exhaust is also shown for comparison)
Unit Garage titanium manifold without cat - R12
CB12751
/ RS600
€1,619.95*
Handmade manifold made of titanium WITHOUT CATALYST, suitable for BMW R12.
Just the thing for anyone who wants to give their R12 a little more power and, above all, a throatier and louder sound. By eliminating the huge original catalytic converter, the engine gets a little more power and sounds much throatier.In addition, the manifold weighs 4.1 kg less than the original.
The manifold also looks good. The ugly chrome of the original manifold has disappeared. In the titanium version, the manifold has very nice, visible weld seams and turns a little blue in some places over time (see pictures).
Exhaust bracket washer
CB12725
/ RS600
€84.00*
Elegant CNC-milled aluminum washer from the premium manufacturer Rizoma from Italy.
The washer replaces the original exhaust screw on your nineT.
Unit Garage manifold without catalytic converter
CB12670M
/ RS600
From
€599.00*
Handmade manifold WITHOUT CATALYST, suitable for all BMW R nineT models. Available in titanium or stainless steel.
Just the thing for all those who want to give their nineT a little more power and, above all, a cooler and louder sound. By eliminating the catalytic converter, the machine gets a little more power and sounds significantly throatier.
The manifold also looks good. The ugly chrome of the original manifold is gone. In the stainless steel version, the manifold is matt silver. In the titanium version, the manifold has very nice, visible weld seams and turns blue in some places over time (see pictures).
Under Engine Exhaust R nineT
CB12416M
/ RS600
From
€1,799.00*
Stainless steel complete exhaust system (including manifold) handmade in Italy with E-number / road approval.
The Under Engine exhaust, suitable for all BMW R9T models, is probably the most minimalist exhaust available for the R nineT series. The short design gives the rear and especially rims area of the BMW a whole new look. Because without an exhaust in the rear of the bike, the view falls entirely on the beautiful single-sided swingarm and the rim.The exhaust system ends directly under the motorcycle and has two nice thick outlets on both sides, which makes for a very aggressive look.
The exhaust system is optionally available with cat & E-number / road approval or as a racing version without E-number / road approval. Behind the E-number, however, is only the Euro 3 model! In addition, the exhaust is optionally available with oval or carbon end caps and in stainless steel matt (silver) or black.
Exhaust Paint Matt Black
CB12181
/ RS600
€23.55*
A can of high quality and heat resistant exhaust paint in matte black.
Suitable for painting exhaust systems. Very interesting for all those who a high-quality ceramic coating too expensive. Of course, you can not compare such a paint with a ceramic coating, but you get a nice result for little money, if you have some painting skill.
In addition, the varnish is suitable for spraying black heat protection bands, if they are to remain black longer.
Krümmer Dichtung BMW R9T
CB12110
/ RS600
€10.00*
Krümmer Dichtungen EINZELN passend für alle BMW R nineT Modelle.ACHTUNG: Die Dichtung wird EINZELN verkauft.
Exhaust holder R9T Scrambler without pillion frame
CB12100
/ RS600
€139.95*
This Unit Garage exhaust bracket allows you to mount your exhaust when you want to remove the pillion frame.
Not everyone rides their nineT as a pair. It makes sense to remove the pillion frame for visual reasons. Since the holder for the original exhaust is integrated into the frame, this holder is needed here.
The holder is also needed to mount the top-mounted Unit Garage exhaust on the Scrambler if no pillion frame is installed.
Exhaust holder R9T Scrambler without rear frame
CB12105
/ RS600
€109.00*
This KRT Framework exhaust bracket allows you to mount your exhaust when you want to remove the pillion frame.
Not everyone rides their nineT as a pair. It makes sense to remove the pillion frame for visual reasons. Since the holder for the original exhaust is integrated into the frame, this holder is required here.
The holder is designed to be as visually unobtrusive as possible on the motorbike.
Crusher protection
CB11007
/ RS600
€35.00*
The SW-MOTECH motorcycle arch protection is designed as a supplement to the engine protection and secures the front manifold pipes against rockfall. At the same time, the robust stainless steel cover serves as heat protection. The universally applicable protector is available in two versions for tube diameters of 32-50 as well as 50-70 mm. By dividing into flexible segments, the covers can be easily adapted to the manifold shape. Depending on the number of pipes and the pipe diameter, the user can assemble the appropriate sheathing for almost every motorcycle model.
particularities
Protection against rockfall for the elbow pipes
Heat protection for drivers and passers-by
Universal fit for tube diameters of 32-50 mm
Flexible segments allow simple adaptation to different pipe variants
Ventilation openings for reliable ventilation
Length: 30 cm
Material: Stainless steel with brushed finish
delivery
Motorcycle anti-bend protection for pipe diameters of 32-50 mm
Mounting material
Installation instructions
Note: The mounting kit is also available in a version for tube diameters of 50-70 mm
Price is for one page.
Original R9T manifold black ceramic coating
CB12187
/ RS600
From
€380.00*
Keramic Black MATT coating of your original BMW manifold.
You send us your original manifold and we send it back to you black ceramic coated.
Duration for this is about 2 - 3 weeks.
The price is only for the complete manifold including catalytic converter (bracket, clamp or other things that are given with it, will be charged additionally).
Stainless steel cleaner
CB12740
/ RS601
€17.95*
Probably the best and most effective cleaner for stainless steel surfaces (e.g. exhaust manifolds & rear silencers).
This cleaner really works wonders! We tested it ourselves in our workshop and could hardly believe how well and quickly the cleaner works (ideal for making manifolds and exhausts look like new again).After a few years, every beautiful stainless steel manifold that was once matt silver or polished no longer looks silver, but yellow.Simply spray such a manifold with the cleaner, wait 2-3 minutes and rinse with water. As if by magic, the manifold will look almost like new again, without grinding / rubbing or similar.
Tip:For safety reasons, we recommend covering other parts of the motorcycle or removing the part to be cleaned.
Unit Garage exhaust grille
CB12342
/ RS601
€139.95*
Titanium exhaust end grille for all Unit Garage exhaust systems.
This end cap is intended as a retrofit end cap if an exhaust system from Unit Garage was ordered without a grille.
Included is sealing paste and gas-tight rivets for mounting.
Unit Garage Carbon Heat Shield
CB12334
/ RS601
€129.95*
A black matte carbon heat shield for the Unit Garage High exhaust system.
The heat shield protects the passenger from burns and also looks visually cool.
Remus Mesh Exhaust top mount
CB12115
/ RS601
€1,039.00*
Remus overhead stainless steel dual exhaust with mesh end grille for BMW R nineT Euro 5 models with overhead exhaust.As usual for Remus exhaust systems, this one is also E-numbered and 100% road legal.
The new design of the Remus exhaust systems is something completely new. In our opinion it fits perfectly to a R9T. This time two silencers, but nice and small and the grille as a highlight at the end of the rear silencer.In terms of workmanship and accuracy of fit, this exhaust system also meets the usual very high standard of all Remus exhaust systems.
The exhaust system provides a nice & muffled, but not too loud sound.It also provides a small increase in power and torque to the engine and gives the vehicle a more dynamic appearance (see power curve in the photos).
Included in the scope of delivery is a raised connecting pipe.
REMUS MESH Features:
Made of stainless steel with OEM and motorsport know-how.
Modern and sporty design in racing style
Power and torque increase
Sporty sonorous sound
Small size
Weight saving
Euro 5 homologation
EC, ABE, EEC
Logo lasered
Mounting paste included
Illustrated installation instructions
Attention: This exhaust system only fits R nineT models from 2021 onwards that have the high exhaust fitted at the factory.
Remus Mesh Exhaust bottom mount
CB12116
/ RS601
€939.00*
Remus down-firing stainless steel dual exhaust with mesh end grille for BMW R nineT Euro 5 models with down-firing exhaust.As usual for Remus exhaust systems, this one is also E-numbered and 100% road legal.
The new design of the Remus exhaust systems is something completely new. In our opinion it fits perfectly to a R9T. This time two silencers, but nice and small and the grille as a highlight at the end of the rear silencer.In terms of workmanship and accuracy of fit, this exhaust system also meets the usual very high standard of all Remus exhaust systems.
The exhaust system provides a nice & muffled, but not too loud sound.It also provides a small increase in power and torque to the engine and gives the vehicle a more dynamic appearance (see power curve in the photos).
REMUS MESH Features:
Made of stainless steel with OEM and motorsport know-how.
Modern and sporty design in racing style
Power and torque increase
Sporty sonorous sound
Small size
Weight saving
Euro 5 homologation
EC, ABE, EEC
Logo lasered
Mounting paste included
Illustrated installation instructions
Attention: This exhaust system only fits R nineT models from 2021 onwards that have been factory fitted with the bottom-mounted exhaust.
Zard Thunderbolt R9T Scrambler Exhaust
CB11486M
/ RS601
From
€1,358.00*
Zard 2-2 Slip-On muffler for R9T Scrambler.
A Scrambler exhaust as it is in the book! This is exactly how the exhaust must look on a Scrambler. Two slim, tapered mufflers that are nice and tight on top of each other. That paired with the grilles at the end of the exhaust provides just the right look that a Scrambler needs! In addition, the exhaust also impresses with its beautifully muffled and rich sound, as it should be for a 2-cylinder boxer.
The sound is already audibly better and throatier through the exhaust, but in our ears does not bring the desired AHA effect that one hopes for. We recommend the people who like it a little more throaty and louder, our additional Zard Racing DB-killers to order (See accessories article in this description without road approval). With the racing DB-killers the bike then has the throaty and nice dull bassy sound that a 1200cc engine should have! The advantage here remains that a DB-killer is installed, the bike is not too loud and it looks like everything is original.
In the basic version, the exhaust is supplied in stainless steel blank (also looks very nice). Optionally, the exhaust can also be ordered in black ceramic-coated.
Zard Hardy R9T Scrambler Exhaust
CB11488M
/ RS601
From
€1,153.00*
Zard 2-2 slip-on muffler for R9T Scrambler in Hardy style.
Two beautiful top-mounted mufflers that are tapered and have a slanted end cap. Due to the slanted end caps, the exhaust opening looks particularly large and provides the cool megaphone look.In addition, the exhaust also impresses with its beautifully muffled and rich sound, as befits a 2-cylinder boxer.
The sound is already audibly better and throatier through the exhaust, but does not bring in our ears the desired AHA effect that one hopes for. We recommend the people who like it a little more throaty and louder, our additional Zard Racing DB-killers to order (See accessories article in this description without road approval). With the racing DB-killers the bike then has the throaty and nice dull bassy sound that a 1200cc engine should have! The advantage here remains that a DB killer is installed, the bike is not too loud and it looks like everything is original.
Zard Flat Track R9T Scrambler Exhaust
CB11489M
/ RS601
From
€1,063.00*
Zard 2-1 Slip On Damper for R9T Scrambler in Flat Tracker Style.
A rear silencer in Flat Track / Dirt Track terrain style. Who wants to convert his Scrambler nice rustic on terrain bike, for which there is no way past the Flat Track exhaust system! In addition to the look, the exhaust also captivates with its beautifully dull and rich sound as it is in a 2 cylinder boxer. Of course, a 2-1 exhaust can never be as dull as a 2-2 exhaust. But Zard got really good at this exhaust. But if you want to be as dull as possible, we recommend the Hardy or Thunderbolt exhaust.
The sound is already audibly better and throatier through the exhaust, but in our ears does not bring the desired AHA effect that one hopes for. We recommend the people who like it a little more throaty and louder, our additional Zard Racing DB-Killer to order (See accessories article in this description without road approval). With the racing DB-killers the bike then has the throaty and nice dull bassy sound that a 1200cc engine should have! The advantage here remains that a DB killer is installed, the bike is not too loud and it looks like everything is original.
Optionally, you can also order end grilles for the exhaust. These then sit at the two outlets of the exhaust (see photo). As standard, the exhaust will be delivered without the grille (see photo 2). If you would like to have the grille on the exhaust, you must order the article "Grille for Zard Exhaust" (see accessories in this description).
Zard 80's R9T Euro4 Exhaust
CB11492M
/ RS601
€1,063.00*
Zard 2-1 Slip On Damper for R9T Euro4 in the 80's style. Fits R9T Classic, Urban GS, Pure & Racer. With E-number (in the Road version) Fits also to the Euro3 models (but is without registration) A classic silencer reminiscent of nostalgic scrambler engines. In addition to the look, the exhaust also captivates with its beautifully dull and rich sound as it is in a 2 cylinder boxer. Of course, a 2-1 exhaust can never be as dull as a 2-2 exhaust. But Zard got really good at this exhaust. But if you want to be as dull as possible, we recommend the Hardy or Thunderbolt exhaust. In the basic version, the exhaust is delivered in stainless steel (looks very nice). Alternatively, the exhaust can also be ordered in black ceramic coated (delivery time here is about 2 weeks extra). For this, please see the accessories article ceramic coating Zard R9T single ESD (see accessories in this description). The coating we make ourselves in a German company, because the coating from Zard does not meet our standards and Zard also requires a delivery time of at least 6 weeks (rather longer) needed.
Zard Flat Track R9T Euro4 Exhaust top lying
CB11494M
/ RS601
From
€1,063.00*
Zard 2-1 slip-on shock for R9T Euro4 in flat track style. Fits R9T Classic, Urban GS, Pure & Racer. With E-number (in the road version). Fits also on Euro3 models (but is without approval for this).
A rear silencer in flat track / dirt track off-road style. If you want to convert your Scrambler to a nice rustic off-road bike, there's no way around the Flat-Track exhaust system!In addition to the look, the exhaust also impresses with its beautifully muffled and rich sound, as befits a 2-cylinder boxer.Of course, a 2-1 exhaust can never be quite as muffled as a 2-2 exhaust. But Zard has really got it right with this exhaust. However, if you want it to be muffled to the max, we recommend the Hardy or Thunderbolt exhaust.
The sound is already audibly better and throatier through the exhaust, but in our ears does not bring the desired AHA effect that one hopes for. We recommend the people who like it a little more throaty and louder, our additional Zard Racing DB-killers to order (See accessories article in this description without street legal). With the racing DB-killers the bike then has the throaty and nice dull bassy sound that a 1200cc engine should have! The advantage here remains that a DB-killer is installed, the bike is not too loud and it looks like everything is original.
Optionally, the exhaust can also be ordered end grilles. These then sit on the two outlets of the exhaust (see photo). As standard, the exhaust is delivered without the grille (see photo 2). If you want to have the grille on the exhaust, you have to order the article "Grille for Zard exhaust" (see accessories in this description).
ESD Black Ceramik Coating
CB10701
/ RS601
€300.00*
We coat your original rear silencer black.
Many would like to have a black exhaust, but don't want to buy a completely new one. We have the solution. You send us your original muffler and we coat it in black matt with a heat resistant ceramic coating.
takes about 2-3 weeks.
Attention! With this article you order ONLY order the SERVICE
High-quality exhaust systems for your Heritage Line BMW motorcycle
For your Heritage Line motorcycle, such as the BMW R nineT, R9T, R12, R12 nineT, R nineT Scrambler or R nineT Pure, you will find high-quality exhaust systems and matching exhaust accessories here! Whether you are looking for a sporty sound, improved performance or a custom look, we have the perfect exhaust solution for you. The selection ranges from robust and precisely manufactured exhaust brackets to complete systems that are perfectly matched to your model. Especially for your Heritage model, the exhaust systems not only offer sound, but also character. This gives your bike exactly the look and performance it deserves.