Determine for yourself what the exhaust flap does and how the exhaust sounds. You can choose between 3 levels using the switch.1. exhaust flap permanently closed2. exhaust flap works as in standard condition3. exhaust flap permanently open   The exhaust flap closes and opens depending on the engine speed and throttle position in the standard state. This has an influence on the sound and draft.With the flap open, the sound is audibly more powerful, with the flap closed, it is quieter. The engine revs up a little more willingly and with more bite when the flap is open.The loud cold start of the EU5 model can be significantly reduced with the flap closed, which even pleases the neighbors. Also very interesting for the guys with louder exhaust systems who come into an inspection... with the flap closed, even a loud exhaust becomes rather quiet.   Easy to fit, suitable for all BMW R nineT models. Mounting material included. Illustrated installation instructions are included!The small control unit is simply inserted between the actuator of the exhaust flap. Plug&Play without cutting cables, soldering, crimping or similar. The switch can be simply screwed onto the handlebar area using the mounting plate supplied or stowed away individually.   Not approved for road traffic.

The Rizoma exhaust caps make the chic original ones something special. Due to the coloring effect of silver and black, it just seems more lively. Since the sound is enough for most drivers, these caps are just the right thing if they want to give the exhaust a more stylish look. Installation is simple and fast.

Exhaust tape Thermo Tec for the ultimate look. Qualitatively the best, because there are some cheap products on the market that are flammable when they come into contact with gasoline. In addition to the anti-chome look, there is the pleasant side effect of directing more exhaust heat where it belongs, to the rear of the muffler. The radiated heat means the engine doesn't heat up as much. 15 meters long & 5 cm wide. That's enough for two manifolds. Two non-rusting clamps for fastening are included. The manifold does not need to be removed for installation. The exhaust tape may fade a little over time (i.e. due to heat, wetness, etc.). Especially with the cream-colored exhaust tape results in a really cool oldschool used look when it fades and then becomes schmutzg by using it and it has different shades. That's how it has to look!

Exhaust tape Thermo Tec for the ultimate look. Qualitatively the best, because there are some cheap products on the market that are flammable when they come into contact with gasoline. In addition to the anti-chome look, there is the pleasant side effect of directing more exhaust heat where it belongs, to the rear of the muffler. The radiated heat means the engine doesn't heat up as much. 15 meters long & 5 cm wide. That's enough for two manifolds. Two non-rusting clamps for fastening are included. The manifold does not need to be removed for installation. The exhaust tape may fade a little over time (i.e. due to heat, wetness, etc.). Especially with the cream-colored exhaust tape results in a really cool oldschool used look when it fades and then becomes schmutzg by using it and it has different shades. That's how it has to look! Classicbike-Raisch recommendation: Who would like to have the tape as long as possible black, we recommend a can of exhaust paint (see accessory article in this description) to order. With this you can spray the finished wrapped manifold then. This will keep the tape black much longer.

Exhaust tape Thermo Tec for the ultimate look. Qualitatively the only true, because there are some cheap products on the market that can burn when gasoline comes to it. In addition to the anti-chrome look, there is the pleasant side effect that simply more exhaust heat is directed to where it belongs: namely to the rear of the muffler. As a result, the engine is no longer so heated up by the radiated heat. In copper colors for a more eye-catching look. 15 meters long in 5 cm width. That's enough for two manifold. Two non-rusting clamps for mounting are included. The manifold does not need to be removed for installation. The exhaust tape will naturally fade a bit over time (due to heat, wetness, etc). This gives you a really cool used look over time.

Raisch racing DB Killer for Zard short exhaust systems. More sound + more performance through more throughput. Approx. 40% larger hole. With our DB Killer there are now 3 sound variants available for the Zard systems. With original DB Killer, with Raisch DB Killer or without. Our DB killers are without ABE. They are supplied in pairs.To be honest, with the original DB-killers you only get a very small sound compared to the standard version. Since most of them do not want to drive without DB-killers, we have made this more open variant. It looks like you have a legal DB-killer in it, but it sounds really good! With these db-killers the Zard systems get the sound they need.

This low exhaust holder from Unit Garage from Italy, allows you to mount a low exhaust on your R nineT without having the subframe mounted.In addition, also suitable for the models that have no holder for below provided from the factory. Suitable for original exhaust, the Unit Garage exhaust systems and other accessories exhaust systems.

Unit Garage exhaust flaps replacement pipe for R nineTThe valve replacement tube replaces the standard valve and the associated automatic sound control. The system always runs open in all speed and rpm ranges. This ensures a richer and more robust sound in every speed range.Note: No road approval.

Elegant CNC-milled aluminum washer from the premium manufacturer Rizoma from Italy. The washer replaces the original exhaust screw on your nineT.

A can of high quality and heat resistant exhaust paint in matte black. Suitable for painting exhaust systems. Very interesting for all those who a high-quality ceramic coating too expensive. Of course, you can not compare such a paint with a ceramic coating, but you get a nice result for little money, if you have some painting skill. In addition, the varnish is suitable for spraying black heat protection bands, if they are to remain black longer.

Krümmer Dichtungen EINZELN passend für alle BMW R nineT Modelle.ACHTUNG: Die Dichtung wird EINZELN verkauft. 

This Unit Garage exhaust bracket allows you to mount your exhaust when you want to remove the pillion frame. Not everyone rides their nineT as a pair. It makes sense to remove the pillion frame for visual reasons. Since the holder for the original exhaust is integrated into the frame, this holder is needed here. The holder is also needed to mount the top-mounted Unit Garage exhaust on the Scrambler if no pillion frame is installed.

This KRT Framework exhaust bracket allows you to mount your exhaust when you want to remove the pillion frame. Not everyone rides their nineT as a pair. It makes sense to remove the pillion frame for visual reasons. Since the holder for the original exhaust is integrated into the frame, this holder is required here. The holder is designed to be as visually unobtrusive as possible on the motorbike.

The SW-MOTECH motorcycle arch protection is designed as a supplement to the engine protection and secures the front manifold pipes against rockfall. At the same time, the robust stainless steel cover serves as heat protection. The universally applicable protector is available in two versions for tube diameters of 32-50 as well as 50-70 mm. By dividing into flexible segments, the covers can be easily adapted to the manifold shape. Depending on the number of pipes and the pipe diameter, the user can assemble the appropriate sheathing for almost every motorcycle model. particularities Protection against rockfall for the elbow pipes Heat protection for drivers and passers-by Universal fit for tube diameters of 32-50 mm Flexible segments allow simple adaptation to different pipe variants Ventilation openings for reliable ventilation Length: 30 cm Material: Stainless steel with brushed finish delivery Motorcycle anti-bend protection for pipe diameters of 32-50 mm Mounting material Installation instructions Note: The mounting kit is also available in a version for tube diameters of 50-70 mm Price is for one page.

Probably the best and most effective cleaner for stainless steel surfaces (e.g. exhaust manifolds & rear silencers). This cleaner really works wonders! We tested it ourselves in our workshop and could hardly believe how well and quickly the cleaner works (ideal for making manifolds and exhausts look like new again).After a few years, every beautiful stainless steel manifold that was once matt silver or polished no longer looks silver, but yellow.Simply spray such a manifold with the cleaner, wait 2-3 minutes and rinse with water. As if by magic, the manifold will look almost like new again, without grinding / rubbing or similar. Tip:For safety reasons, we recommend covering other parts of the motorcycle or removing the part to be cleaned.

Titanium exhaust end grille for all Unit Garage exhaust systems. This end cap is intended as a retrofit end cap if an exhaust system from Unit Garage was ordered without a grille. Included is sealing paste and gas-tight rivets for mounting.

A black matte carbon heat shield for the Unit Garage High exhaust system. The heat shield protects the passenger from burns and also looks visually cool.