CNC-milled aluminum replacement pegs for your BMW R nineT / R12.The footrests are supplied as a complete set including mounts. The high-quality Gilles footrests look really classy and are exactly the right size. Not too big to look good, and not too small so that you have the necessary grip on the footrests.The footrests can be used with or without the rubber inserts supplied. Adjustable footrests - change your knee angle:Vario joints are also available as an option for the Gilles footrests. This allows you to mount the footrests offset by either 30 or 40 mm through 360°.You can find the Vario adapters under the accessory products in this description.

Classicbike-Raisch Plug & Play Schaltautomaten Kit für BMW R nineT Modelle. Die Montage des Quickshifters ist sehr einfach und in kurzer Zeit erledigt (es ist kein Kabel Schneiden, Löten oder verändern notwendig).Eine ausführliche, Modell bezogene Beschreibung mit Bildern ist im Lieferumfang enthalten. Außerdem sind alle weiteren notwendigen Montagematerialien sowie ein Schraubenschlüssel im Lieferumfang enthalten. Das Schaltautomat Modul wird von uns passend voreingestellt, damit ihr ihn nur einbauen müsst und direkt losfahren könnt. Zur Montage- Es wird mittelfeste Schraubensicherung benötigt. Wer diese nicht zuhause hat, kann sich hier direkt eine kleine Flasche dazu bestellen (findet ihr unter den Zubehör Artikeln in dieser Beschreibung).- Außerdem empfehlen wir zur schöneren Kabelführung und Ansicht eine Rolle Gewebeband dazu zu bestellen (findet ihr auch unter den Zubehörartikeln). Wir haben den Automaten an unseren eigenen Maschinen über eine komplette Saison gefahren und ausgiebig getestet, bevor wir ihn euch anbieten. Er funktioniert wirklich überragend! In erster Linie ist so ein Quickshifter natürlich richtig geil, wenn man grade richtig sportlich unterwegs ist und die Gänge möglichst schnell durchschalten will. Einfach unter Volllast einen Gang hochschalten und der Automat übernimmt die Arbeit für dich. Schneller kann man nicht schalten!Allerdings ist es auch beim entspannten Fahren durch die City sehr angenehm nicht bei jedem hochschalten die Kupplung ziehen zu müssen. Ich finde es besonders angenehm, wenn man etwas zügiger von 20 km/h auf z.B. 70-80 km/h durchbeschleunigt und man Gang für Gang entspannt durchschalten kann.  Für alle die nicht wissen was ein Schaltautomat macht. Dieser unterbricht beim Schaltvorgang (nur beim Gänge hoch schalten) die Zündung. Das erlaubt dir, dass du ohne die Kupplung zu ziehen & ohne Gas weg zu nehmen die Gänge hochschalten kannst.

Aluminium frame batch with nineT or R-Logo lettering for the passenger frame on all BMW R nine T models. Many people drive their R9T without pillion frame and have the two threads open on the right & left side.Therefore we designed two nice badges which are mounted on this place.Matching black screws are including.

The gear levers, like most metal parts on the R9T's, have the unattractive die-cast surface, which doesn't look very classy. But we can also coat them with black powder! Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Together with the black coating of your R9T's footrest system (see accessories article in this description), you get a completely black footrest system. You simply send us your gear lever, we sandblast it, tape all the places that have to remain free and coat it black (RAL9005). Duration until you have your part coated black again: approx. 2 - 3 weeks.

The LSL Ergonia footrest is made of forged aluminium, finely bead blasted and finely milled on the upper side, resulting in a very noble surface finish. Optically, the footrests are an absolute eye-catcher, the fine but not too pointed teeth provide a light cross ratchet look. With a length of 80mm, the rests offer the perfect compromise between comfort (wide support) and sportiness (not too fast to put on). The rubber insert of the footrests can be easily removed (see photo of the green footrest). Visually, the footrest looks even more radical without the rubber. With rubber perfect for comfort and touring, without rubber for the sporty ride and aggressive look. For mounting on the motorcycle, additional, model-specific adapters are required. Suitable adapters for the different motorcycles can be found in the accessories of this description. Detents and adapters are equipped with ABE!

Adjustable, CNC milled aluminium footrest system for the BMW R9T Classic Euro3 & Euro4 models.This footrest system is made of high quality aluminium, which is also used in aircraft construction. Even if it is optically only details, it makes a difference if you exchange the original cast iron footrest system for this noble milled footrest system.However, it does not only offer optical advantages. It is also individually adjustable to the driver, by the adjustment possibility of the footrest (see here for the pictures). Please select the suitable model so that the correct pictures are displayed).The footrest system of the Euro3 R9T is delivered with ABE. For the Euro4 model the ABE will follow in April 2019.For the Euro4 models, the footrest system is delivered with folding footrests.

The round Rizoma "B-PRO" catches are provided with an extra-grip knurling. The plastic cap at the end of the catch is interchangeable. Made from Billet ALuminium ATTENTION! Model-specific catches must also be ordered (see accessories in this description).

The Rizoma "Snake" rests are beveled, very delicate sports rims made of billet aluminum. The ribbing on the notches ensures a particularly good hold. ATTENTION! Model-specific catches must also be ordered (see accessories in this description).

The Rizoma "RALLY" footrests are really nice radical cross footrests. Just the right thing for a scrambler conversion! Made from high quality billet aluminum.The footrests give you exactly the grip you need when you're off-road! Especially when you ride standing up.Of course they look perfect for every scrambler conversion!ATTENTION: You have to order model-specific detent holders (see accessories in this description).

The adjustable peg adapters allow you to mount all Rizoma pegs in the perfect position for you. It also allows you to mount the pegs in a wide variety of positions. There is a suitable position for every rider (whether lower, higher, further forward or to the rear).

The new Rizoma Protocol footpegs are probably the most elegant and high quality footpegs that you can buy for a motorcycle! The Urban Protocol footpegs embody the know-how of Rizoma in the high-precision machining of aluminum. The innovative design consists of a double anodization and a special fade finishing technique. The base is wider to improve ergonomics and to accommodate a central platform, non-slip and interchangeable, characterized by a contrasting finish with serrated pins to highlight the support area. The rests are with TÜV certificate. ATTENTION! Model specific detent mounts must also be ordered (see accessories in this description).

Relocated back Rizoma complete rest system for R nineT models. Probably the most noble rest system on the market, is simply a "must have" for every R nineT owner, as this impresses both in functionality and through the new design."Comfortable and sporty" could summarize the description here, which in detail by a 6-fold adjustment of the footrests and multiple adjustable shift and brake levers, the driver an optimal driving position allows. The best materials and precision processing ensure a top-class product. Particularly suitable for those who prefer a slightly sportier seating position or have installed stumps. With parts certificate for R nineT models RN12. But can be easily registered for all other models.

Move footrest joint. For R9T / R12. Great part. For big feet, small feet, athletic position or rather relaxed with lesser kniewinkel.ca. 2.5 cm adjustment is possible compared to the previous position. The joint can be fixed in any desired position (8 different positions are possible) in a matter of seconds. Without ratchets. You can find matching ratchets in the accessories of this description. Attention for Scrambler & Urban GS: For these two models, the mounts fit ONLY rear.

Extreme footrests, very strong, coarse toothing. Milled from the full. Pair black hard anodized. The footrests provide a solid, high quality look and provide a really good grip. Just the right look and grip for every off road scrambler. For mounting on the motorcycle, additional model specific adapters are required. Suitable adapters for the different motorcycles can be found in the accessories of this description. Ratchets and adapters are available with ABE!  

Height adjustable SW-Motech cross stays for BMW R9T(please select model). These crossbars give by their structure and size right hold! With a screw on the underside so that the notch does not drag away with a lot of inclination. For mounting on the footrest mounting bracketMade of high-quality, corrosion-resistant cast stainless steel with removable rubber coatingLargely dimensioned contact areaNon-slip due to profiled surface structureFootrest joint made of high-strength aluminium alloy, CNC milledScrewable in two height positions (original position and 15 mm lower)Suitable for off-road and touring applicationsScope of delivery: 2 footrests including retaining jointsmounting materialmounting instructions

The original footrest provides no comfortable position? Then the adjustable cross-ply is the ideal solution. An ingenious system, consisting of rotatable elements with firmly interlocking teeth, offers 36 possibilities for variation. The position of the footrest can be adjusted upwards and downwards, front and rear and in the inclination to the individual needs. A model-specific general operating license (ABE) is available. Easy mounting on the original footrest mount 36-fold adjustable by means of rotatable, toothed elements up, down, front, rear and inclination Safe hold by interlocking the elements and screw connection Markers facilitate the symmetrical adjustment of both sides Profile with rounded edges protects the boot sole and gives extra grip Removable, metal-reinforced rubber pad with anti-slip surface structure and large support surface (approx. 8 x 5 cm) for more comfort and support Material: Electropolished, corrosion-resistant stainless steel Color: silver with black rubber pad

Aluminium-Schalthebel für alle R9T Modelle sowie die R12 nineT mit stufenlos verstellbarem Auftritt zur fußgerechten Anpassung des Schaltweges. Eine Hart-Coat-Behandlung beugt Kratzern am Hebel vor, die eingebaute Klappfeder schützt den Schalthebel bei Stürzen. Nach dem Tausch des Schalthebels sollte der originale Schalthebel in das Tour-Gepäck wandern, denn dies ist ein typisches Sturzteil, welches eine Tour sofort beendet. Sehr gut für Leute mit besonders großen oder besonders kleinen Füßen geeignet.    Zweiteiliger Schalthebel mit stufenlos verstellbarer Einheit Abstand zwischen Auftritt und Schaltwelle beim originalen Schalthebel: 60 mm Einstellbereich des Abstands zwischen Auftritt und Schaltwelle beim SW-MOTECH Schalthebel: 32 - 86 mm Der Auftritt lässt sich ebenfalls um 180 Grad gedreht montieren Bessere Ergonomie und sichere Bedienung des Schalthebels Federmechanismus ermöglicht Einklappen und schützt vor Bruch bei Stürzen Robust und formschön: CNC-gefrästes, HART-COAT® beschichtetes Aluminium Montage einer Schalthebel-Verlängerung zur Vergrößerung der Auftrittsfläche möglich Keine ABE für den deutschen Straßenverkehr erforderlich

LSL Aluminium Racing Ratchets bevelled and knurled in black & silver. The pegs are nice and short, but still offer a good grip due to their very rough knurling. Just the right thing for a sporty Cafe Racer conversion. For mounting on the motorcycle, additional model specific adapters are required. You will find suitable adapters for the different motorcycles in the accessories of this description. Ratchets and adapters are available with ABE!

LSL footpegs system. Completely CNC milled. Very precise. Available in black or silver. With TÜV parts certificate. Height like original, back = 50mm, for a sportier seating position. A must for the stub handlebar, but also perfectly suitable for the tubular handlebar. The system is supplied with detents.Info about the Euro 4 footrests: The detent system is delivered with a folding detent holder. This is very important for all those who prefer a sportier ride, as the footrests can also be mounted in a strong inclined position. Due to the folding joint, they simply fold up. Is also very practical when loading the motorcycle on a trailer.The footrest system is delivered with a parts certificate and does NOT have to be registered.Info about the Euro 3 footrests: The footrest system is delivered without folding footrest mounting. This must be ordered separately (see accessories in this description). We urgently recommend ordering the folding joint.

AC Schnitzer exchange catch (set) front with ABE

AC Schnitzer replacement catches (set) at the rear. With ABE

AC SWITZERLAND FOOTSTARS AS KIT FRONT + REAR

LSL aluminum footrests heavily knurled in black & silver. The rests are nice and short, but still offer a good grip due to their very rough knurling. Just the right thing for a sporty Cafe Racer conversion. For mounting on the motorcycle, additional model specific adapters are required. You will find suitable adapters for the different motorcycles in the accessories of this description. Ratchets and adapters are available with ABE!