CNC machined aluminum cover for the steering head nut of all BMW R nineT models. The original Lemkkopf nut of the R9T's is not exactly beautiful. To replace this is quite costly, because the handlebars must be disassembled for this. So we offer you here a very chic and practical cover. It is simply plugged over the steering head nut and covers this completely. The cover is put on it within seconds or pulled off again. The Milled design of the steering head cover is the same as our other Milled Producten (tank emblems, brake reservoir cover ...)

This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.  

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.  

For all Fatbar Handlebars (R9T & Scrambler) For all Fatbar accessories handlebars as used on all R9T models (does not fit the original handlebar) The price is for one pair.

High quality and noble handlebar weight of Rizoma. The weights are either black or sillber anodized. It is available with a plastic end cap or without (the black cap does not only add a color accent, but this is individually interchangeable, if you get scratches on a wall or so). The weights fit into any high-end accessory handlebar from 22mm to 1 "since different adapters are included in the scope. The handlebars are also suitable for attaching / clamping some Rizoma handlebar mirrors. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

These chic end weights of the brand LSL fulfill several functions. On the one hand, they serve as a chic handlebar end to the other, they serve as a handlebar widening to mount all handlebar end mirrors that have a clamping diameter of 29.8mm. Who wants to use the weight only as a handlebar end and not for mounting mirrors, we recommend the matching handlebar weight ring to order (see accessories in this description). The weights are equipped with universal expansion dowels, which allow them to mount in almost all common accessory handlebars. Fits all handlebars with an inner diameter of 12 - 22mm. The weights are fine glass bead blasted before anodizing, giving them a very classy, slightly matte finish. In addition, they are supplied with a small cap, which comes into the clamping screw in front of head, which hides the screw head. Dimensions: Handlebar weight Ø: 36.6 mm Width: 20.5 mm Holder for handlebar end mirrors with outer clamp: Diameter: 29.8 mm Width: 12 mm Weight: 72 g Scope of delivery: 1 pair, incl. mounting material 2 x clamping sleeves each with Ø 12 and 16 mm 2 x spacer sleeves each with Ø 14, 18 and 21 mm 2 x M6 central screws2 x M6 cone nuts __________________________________________________ Note for mounting on BMW R9T models with original handlebars: The R9T original handlebars have a M10 internal thread. This can be drilled to 12mm, then it is possible to use the weights in combination with the original handlebar.

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.  

Serve as a cover for the handlebars on the original fork bridge of the R9T. To cover when a mute bucket is installed.

Real leather bag for mounting on cross handlebars or a handlebar cross brace. Looks cool and is very practical. Who does not know it, you ride a short round with your bike and have your mobile phone, wallet, keys or similar in your pocket. All the time you grab your leg to make sure that nothing falls out of your pocket. With this small bag, the problem is solved. It also gives the handlebars of your bike a really nice look. Only works with bolted handlebar struts, not with cross handlebars with welded-in handlebar struts.

LSL handlebar weights chrome or black for 1", 22mm and FatBar (all R9T models) Alu handlebar pair. The internal thread of the original handlebar must be removed or drilled out.

Die SW-Motech Handprotektoren-Kit schützt die Lenkerarmaturen deines Bikes bei Stürzen und deine Hände vor Witterungseinflüssen wie kalter Luft und Regen. Die Basis bildet ein stabiler Aluminiumbügel, an dem die Sport Handschalen befestigt sind. Der schlagfeste Kunststoff der Schalen ist flexibel und bietet besten Schutz vor äußeren Faktoren. Die schlanke Form und die mattschwarze Optik sorgen außerdem für ein stillvolles Designelement am Lenker.Genau das richtige für alle BMW Fahrer, die ihrem Motorrad einen leichten Off Road / Motocross Look verleihen wollen. Sehr praktisch sind Handguards für Fahrer, die bei Wind & Wetter fahren, sie haltne die Hände trockener und sorgen für Windschutz, damit die Hände nicht kalt werden. Es gibt die Handguards in zwei Ausführungen: Sport: Die etwas kleinere Schalen haben.Adventure: Größere Schalen wie bei einer klassichen Enduro. Stabiler geschlossener Aluminiumrahmen Zeitloses Design mit Handschalen aus schlagfestem Moplen-Kunststoff Großdimensionierte Handschalen bieten besten Schutz vor Witterungseinflüssen Einfache Montage der Handschalen an den Aluminiumbügeln, bei Bedarf austauschbar Lieferumfang 2 x BBSTORM Handprotektoren-Schalen, links und rechts 1 x Barkbusters Handprotektoren Montage-Kit, links und rechts Anbauanleitung Montagematerial

When fitting a new handlebar to all BMW R Nine T models, it is necessary to drill two holes in the new handlebar. The original fittings are then locked in place. Since it is not easy to drill a hole in round material (like a handlebar) and these have to be exactly opposite, we offer this drilling template. This is simply put around the handlebar and screwed. So it is very easy to drill the two holes exactly opposite each other.