€0.00*

Alu Handlebar Fat Bar 760mm BMW R9T

€89.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
from €48.00*
€24.95*
from €99.95*
€36.95*
Product number: CB11668
item number: 128AX01SW
Product information "Alu Handlebar Fat Bar 760mm BMW R9T"

The Fat Bar handlebar is as wide as the original BMW R9T handlebar. However, it is a bit flatter and grader than the original. So you get a more front wheel oriented seating position and optically a flatter line.
The Fat Bar is similar to the Cross Bar: same height, a bit narrower and a bit more cranked to the driver.

Dimensions: 780mm wide 70mm high 155mm offset.

The handlebar is made of aluminium and comes with ABE. All cables and cables are sufficient (i.e. the handlebars can be easily exchanged). The original handlebar end caps will no longer fit (here we would recommend to take the Rizoma handlebar end weights or to convert to handlebar end indicators - as with the motorcycle on the pictures / see accessories article in this description).

In black as well as in silver the handlebars have a nice, matt pearl blasted surface.

In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.

Models BMW R nineT:
  • R nineT /5 EU 4
  • R nineT Classic EU 3
  • R nineT Classic EU 4
  • R nineT Pure EU 4
  • R nineT Scrambler EU 4
  • R nineT Scrambler EU 4.
  • R nineT Urban GS EU 4
BMW R nineT
R nineT /5 EU 4
R nineT Classic EU 3
R nineT Classic EU 4
R nineT Classic EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
1
1
1
1

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Rizoma Cap Handlebar endweight
Rizoma Cap Handlebar endweight CB11312.1M / RS0
This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

From €48.00*
Details
Handlebar stay Crossbar
Handlebar stay Crossbar CB12606 / RS601
Aluminum handlebar brace, suitable for some LSL Fat Bar handlebars from our range. The brace gives your motorcycle a classic scrambler / offroad look. Suitable for LSL aluminum handlebars: 128AX: A00 / A01 / A02 / A03 / A04 (all matching handlebars can be found under accessories in this product description).

€24.95*
Motogadget Handlebar Indicator M.Blaze Disc
Motogadget Handlebar Indicator M.Blaze Disc CB11132.2M / RS600
Noble handlebar end turn signals from Motogadget. The housing is CNC machined from aluminum. Because the indicators are so flat and have a clear glass, they are as good as not noticeable. Nestle by the appropriate size very perfectly to most handlebar grips. Are very visible from the front and are also seen from behind (for behind, however, they are not recognized in the StvO as turn signals). Fit all handlebar sizes accessory handlebars with an Inndendurchmesser of 14mm - 21mm. In most original handlebars fit the turn signals unfortunately not. For BMW R nineT models, however, there are suitable adapters for the original handlebar (see accessory article in this description). More elegant and cleverly solved you can not install a turn signal for the front. The aluminum housing in conjunction with the clear glass pane is an absolute eye-catcher.To get a particularly clean front, we recommend the Motogadget turn signals in combination with the perfectly matching handlebar end mirrors from Motogadget to combine. Matching adapters for this, in order not to have to move the fittings on the handlebars, are of course also available from Motogadget (everything can be found under the accessories in this description).If you want it to be perfect, you can order the matching handlebar grips (in the same diameter as the turn signals) from Motogadget. The optical turn signal counterpart for the rear (Motogadget Pin) can be found in the accessories of this description. For easy installation of the turn signals, we recommend model-specific turn signal plugs, so that nothing has to be cut off the original wiring harness.

From €99.95*
Details
Drilling template fittings / handlebars R9T
Drilling template fittings / handlebars R9T CB11752 / RS600
When fitting a new handlebar to all BMW R Nine T models, it is necessary to drill two holes in the new handlebar. The original fittings are then locked in place. Since it is not easy to drill a hole in round material (like a handlebar) and these have to be exactly opposite, we offer this drilling template. This is simply put around the handlebar and screwed. So it is very easy to drill the two holes exactly opposite each other.

€36.95*