The Shorty Pro 2 LED mini taillight is extremely small and intended for installation, for example, a frame. Despite its minimal size, the taillight is with an E-number and legal. We have the taillight until now always (with the help of the welded housing) installed in the rear frame / round arch of motorcycles (see also mounted pictures). But of course it can also be installed in a fairing or similar. The matching weld-in housing to the Shorty tail light, you will find under the accessories in this description.   Dimensions: Width: 40 mm Height: 8,5 mm Depth: 13 mm Technical data: Yellow cable = driving light (+) Red cable = brake light (+) Black cable = ground (-)

Classicbike-Raisch LED Stripe rear suitable for all BMW R nineT models. Street legal! The LED Stripe rear is the most noble & elegant rear for nineT models that we have in our range.The rear of your nineT is given a minimalist & modern look with this kit, through the filigree milling bracket and the modern LED strip & completely legal! The tail light with breaklight is with E-number and the tail complies with all StvO standards. Here nothing needs to be registered with the TÜV. Simply attach & enjoy. The LED bracket milled from aluminum fits perfectly to all BMW original seats as well as the BMW hump. A perfect fit on all seat benches is guaranteed by the spacer kit, which is included. This kit contains different spacers to distance the height of the milling bracket perfectly to the respective installed seat. The kit of course also works with numerous seat benches from the accessories, such as the Cool Seat from our range.Also with the passenger pillion frame everything fits perfectly. The bracket for the LED strip is milled from an aluminum block in Germany and then anodized deep black. The LED strip (with E-number) is then glued into the milling bracket. This makes the part look like it was cast from one piece. Included in the kit is an aluminum underbody plate, which replaces the original plastic shell. For the R nineT Euro 4 & 5 models, the plastic box for the control unit is also replaced. This is unsightly on the one hand because it is made of plastic and on the other hand because it builds up very low and thus disturbs the line of the rear area. Through the new aluminum sheet you no longer look from the side on the edge of the box & the rear gets a perfect line. The scope of delivery includes all materials, such as screws, cable ties, heat shrink tubing, connectors, etc., as well as a very detailed step by step instructions to ensure easy & problem-free installation. To buy the kit reduced in the set, simply below the description, the accessory items such as turn signals, reduced order. License plate holder: The kit is delivered WITHOUT a license plate holder. Since the kit looks just awesome with both a central and a side license plate holder! Our recommendations:Variant 1: License plate holder HeckWeck R9T / This holder is mounted centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant does NOT need to be registered). This is the holder, which is also mounted on some product photos.Variant 2: License plate holder HeckWeck R9T - Short / This holder is mounted as in variant 1 centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant must NOT be registered). The difference to variant 1 is that the short version is much shorter and has an adjustment for the angle of the license plate. This allows us to mount the license plate significantly shorter (steeper than 30 °) but for TÜV or controls within a handle to be able to put down to 30°. Variant 3 Side license plate holder:There are 4 different holders to choose from: 1. the Vario holder: an inexpensive (but still very high quality) holder reduced to the bare essentials (the most inconspicuous of all), which fits all license plate sizes and is variably adjustable in position - must be registered individually.2. the Rizoma holder: Probably the highest quality holder of all. This holder is supplied with a parts certificate and can simply be fitted (does not have to be registered with the TÜV).3. the adjustable bracket: A sophisticated bracket with an aluminum license plate, which also has variable adjustment. Must also be registered by individual approval. 4. The AC-Schnitzer holder: A license plate holder milled from solid material with parts certificate.   Turn signal: In the milling bracket is on both sides a 8er bore, this allows it to mount any turn signal with an M8 thread. He is held turn signal by a grub screw, which is included.Who does not want to mount a turn signal on the bracket, which can order the turn signal plugs (further down in this description). These then serve as blind plugs for the turn signal hole. Further down in this description you can order all, to the rear matching turn signals, from our range in the bundle. In the bundle you will automatically be granted a discount of 10% on all turn signals. Accessories: Classicbike-Raisch recommends for easier installation still turn signal plugs & tail light plugs.For all those who want to be 100% legal on the road, there is still a reflector as an accessory.To mount the license plate, we recommend the license plate screw set. All parts you can order below in the description with it. To buy the kit reduced in a set click on the button "buy this item in a set" above under shopping cart  Luggage:The LED bracket goes to the same mounting points as most luggage systems. Together with the LED stripe rear, the Unit Garage bags can be mounted. Note on the BMW alarm system: Our base plate does not have any fixing points for the alarm system. If you would still like to have it installed, we recommend attaching the alarm system with double-sided adhesive tape.

The mo.blaze tens2 from motogadget is the smallest taillight/brake light combination in the world. Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to IntensiLED® Technology and definitely not to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The taillight / brake light combination has an ECE approval as a rear taillight and brake light. The aluminum housing is CNC machined and available in black anodized or mirror polished finish. The taillight / brake light combination can be operated like any standard LED light with 12 V. The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed. Specifications: Total length with thread 29 mm Leangth without thread 11 mm Largest diameter 11 mm Wire leangth ca. 110 cm Weigth with wire  ca. 20 g Mounting M8 Gewindebolzen Power consumption ca. 1/1 Watt

Kellermann Atto Taillight, the smallest LED taillight available on the market! And that with E-number! Perfect for anyone who wants to have the taillight just as inconspicuous as possible on the bike to get as clean a tail as possible (see pictures) Especially in connection with the Atto turn signals you get in the rear area an incredibly clean look. (The indicators can be found under Accessories in this description). The Quadrature of the circle has been achieved with the Atto RB: This rear and brake light is extremely small and also spectacularly bright. Compact and bright: This combination makes the Atto® RB a real sensation! For comparison: the light surface of the Atto® fits four times on a 1 cent coin! This consistent reduction opens up completely new design options on the motorcycle. Due to the Atto® RB, the component "rear and brake light" on the motorcycle can virtually disappear visually. When it shines, it shines with intensity that made Kellermann's products legendary and our company a trendsetter over and over again. The Atto RB offers maximum brightness with minimal size, in short: it is "sensationally small - spectacularly bright". We recommend not to look directly into the light of this small power plant for too long! An optimized light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology is the first application of our new EXtranz - Extreme Optical Transparency Technology makes this combination possible.

Rizoma LED Taillight in Cafe Racer Style. Rizoma means: high quality, this also applies to this taillight. A chic, small LED aluminum rear light in deep black anodized, which is manufactured in the highest quality. Fits perfectly with all conversions, with a short fender in which a central tail light is to be installed (see attachment photo on the R9T).

Finally a small taillight, in the classic design, that despite the small size is bright. Everyone who now thinks LED with a classic motorcycle, it does not fit. Is wrong, because the rear light fits like ass on bucket to our bikes and also the LED light looks good. The housing is completely metal. In the non-visible area, there is a small slot on the underside, in which the license plate lights. Tail light is with E number. Rücklicht ist mit E-Nummer

Bates Style taillight LED black. Super class metal metal. With e-number. Here to the ready wired cable set