These CNC machined aluminum turn signal adapters allow the mounting of almost all accessory turn signals with M8 thread, on the original turn signal holder of all BMW R nineT models. The shape of the indicator holder fits the original BMW motorcycle holder and is screwed to the original holder. The accessory indicators are then simply pushed into the arm of the adapter and fixed with a grub screw.So you can mount the accessory turn signals very easy and above all optically well solved on the original mounting of your R9T.The adapters fit both front and rear.In the front they fit directly Plug&Play to the original plastic caps. If you want to mount the adapters directly on the oil cooler (looks nicer), you have to drill the rear thread. The adapters are delivered as a pair.We also recommend to order matching turn signal plugs, so that nothing has to be cut off at the wiring harness (see accessories in this description). The following turn signals from our assortment have a M8 thread and fit with the adapters: All Rizoma turn signals / Motogadget Pin turn signals / all Kellermann turn signals (except the Atto) / Bullet LED turn signals / Blaze LED turn signals Our recommendation are the Motogadget Pin Turn Signals, because they have a 100% perfect transition to the adapter. With the indicators it almost looks like one part. (see accessories in this description). With the adapter all turn signals on all motorcycles keep the legal minimum distances. For the Urbang GS we also have special adapters in the program, which allow accessories to mount turn signals on the original turn signal clamps on the fork (see accessories article).

This CNC machined aluminum turn signal adapters pair allow the installation of virtually all accessories turn signals with M8 thread, on the original fork clamps of the BMW R nine T Urban GS. The shape of the turn signal adapter fits exactly on the original BMW turn signal clamps on the fork. The accessories turn signals are then simply pushed into the arm of the adapter and fixed via a grub screw.So you can easily install beautiful accessories turn signals even with the Urban GS, without having to first remove the fork and remove the clamps. The adapters are supplied as a pair.Available in black or silver.We also recommend to order matching turn signal plugs, so that nothing has to be cut off at the wiring harness (see accessory article in this description). The following turn signals from our range have an M8 thread and fit with the adapters: All Rizoma turn signals / Motogadget pin turn signals / all Kellermann turn signals (except the Atto) / Bullet LED turn signals / Blaze LED turn signals. Our recommendation are the Motogadget pin turn signals, because they have a 100% perfect transition to the adapters. With the turn signals it almost looks like one part. (See accessory article in this description). With the adapter, all turn signals on all motorcycles comply with the minimum distances required by law. The matching adapter for rear we have of course also in the program (accessory items in the description).

These indicator adapters, milled from aluminium and black anodised, allow easy mounting of all accessory turn signals with M8 thread on the oil cooler of all BMW R nineT models. The adapters are screwed onto the tab of the oil cooler (suitable screws are supplied). The turn signals are then inserted into the adapter and securely fixed from below with a grub screw. With the adapter, the turn signals are mounted so nicely and elegantly on the oil cooler.The clean transition from the indicator to the adapter makes them look almost like a single piece. We recommend ordering a set of indicator plugs for easy installation so that the plugs on the wiring harness do not have to be cut off (see accessories article in this description). Matching turn signals can also be found in the accessories.

A pair of CNC milled fork clamps for mounting turn signals, suitable for all R9T models (except R9T Classic)The clamps can easily be attached to the fork tubes within a few minutes. At the included turn signal holder every accessory turn signal can be attached with M8 thread (all indicators that fit are listed under accessories in this description). A very inconspicuous and chic possibility to mount small turn signals at the front of the R9T. In order to be able to lay the turn signal cables as beautifully as possible, we recommend to order the cable fixers (see accessory artiekl in this description).

Universal indicator holder for mounting the indicators on the rear of the licence plate. The holder is 17.5 cm wide. The holder is made of aluminium and coated in black powder.There is a very practical slot in the two indicator holes, which makes it possible to fit indicators without having to disconnect the cable.The holder also has two slotted holes so that it can be easily attached to your licence plate screws without having to drill any holes. The indicator holder is available with either an 8 or 10 mm hole. This refers to the thread size of the indicators. Most accessory indicators have an 8 mm thread. The indicators from our range with conventional halogen bulbs (such as the Drops or Arizona indicators) still have a 10 mm thread.

With these aluminum mounting plates, it is possible to mount all accessory turn signals on the original fastenings of the BMW R9T / R12.At the same time, the plate covers the hole that is created when you remove the original turn signals.The plates are sold as a pair.

Rizoma turn signal holder for mounting the turn signals on the fork.The clamps are made of very high quality black plastic. The material is very flexible, which makes it possible to put the clamps easily over the fork without having to remove the fork.The delivery includes different spacer rings to use the clamps for forks with a diameter of 48-55mm.Turn signals can then be easily attached to the clamps. Perfectly suitable for all Rizoma turn signals (but also works with other turn signals from our assortment).

32mm turn signal arm extension for all Rizoma & Motogadget Pin turn signals. Perfect when the turn signals are too close together and do not respect the minimum distance required by law.Or you just want to have the turn signals a little further out.It is compatible with all the turn signals you will find in the accessories of this description.The extensions are sold separately.

The Kellermann Underbar Adapter allows you to mount the Kellermann Atto turn signals below the handlebars on all BMW R nineT models. ATTENTION: The adapters are sold SEPARATELY. The underbar adapter replaces the original nut of the brake / clutch lever screw (is exchanged 1 to 1). The adapter then has a hole on the side into which a Kellermann Atto indicator can be inserted. The indicator is then attached using a grub screw integrated in the adapter. Probably the easiest and most inconspicuous way to replace the front turn signals on a BMW R9T. Matching Kellermann Atto turn signals can be found below this description under the accessories.

Motogadget handlebar extensions that allow all Motogadget M.View handlebar end mirrors to be mounted without having to move the fittings on the handlebars further inwards.In addition, the Motogadget M.Blaze Disc handlebar end turn signal can be mounted on the outside of the adapter. It creates a clamping surface for the handlebar end mirror outside the steering tube and at the same time allows the mounting of the handlebar end turn signal. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise as well as mo.view street. It is CNC machined from billet aluminum and anodized black. The clamping in the handlebar end is done by tightening a M6 screw inside the adapter, which expands the clamping pieces and allows a stable mounting. Then the mirror clamp on the adapter is tightened and thus simultaneously clamped the handlebar end turn signal. The bar adapter uni disc/cone comes with two clamps for the left and right side of the handlebar. They fit perfectly to our grips mo.grip as well as the push button fittings mo.switch basic and mo.switch mini. They are mounted directly in the end of the handlebar (22 mm, 7/8 and 1 inch) with a free inner diameter of 12 to 21 mm (without internal thread) and a length of 90 mm. Dimensions:Fits all handlebars with 22 mm, 7/8 and 1 inch with a free inner diameter of 12 to 21 mm.Total length: approx. 105 mm, at least 90 mm free inner tube length requiredWidth of clamping surface for mirror: 8 mm, fits all mo.view handlebar end mirrors Diameter of clamping surface: 1 inch, fits all mo.view handlebar end mirrors Weight (1 piece): 55 g Scope of delivery:2 x bar adapter uni disc/cone, instructions Attention does not fit on motorbikes with original handlebars that are not hollow from the inside (which is the case with almost all original handlebars).

Pair of cover caps including 2 stainless steel screws for fastening.The caps cover the turn signal mount on the oil cooler of the R9T models, if you mount the turn signal in another place (for example handlebar ends or under the armatures).