A PAIR of Sw-Motech mirror extensions, suitable for all BMW R nineT models. For all riders for whom safety and a good view to the rear are important. So that not only your own shoulders are visible in the rear-view mirror: The extension elements provide a significantly improved field of vision by moving the mirrors outwards. Once adjusted and screwed in place, the robust and stylish extensions give the mirrors a secure hold, even at higher speeds and off-road. An ABE is available for many motorbike models. Up to 4 cm height gain, up to 4 cm lateral offsetTo improve rear visibilityEasy mounting on the mirror threadScope of delivery 2 x mirror extensions for handlebar mounted mirrorsFitting instructionsMounting materialDetails Material: aluminiumSurface: anodisedColour: blackTotal weight: approx. 0.3 kg

This CNC machined aluminum clamp replaces the original armature clamps. Fits all for all BMW R9T models. This makes sense when you convert the motorcycles to handlebar end mirrors, because otherwise you look at the open mirror thread of the original clamp. In addition, the clamps make optically also really what her through their high-quality surface and the milled BMW logo. Of course, this is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time. The adapters are black anodized & in the aftermath, the BMW logo is milled again. The clamps look very classy on the handlebars.The new version of the adapter is in a Galsperlen blasted Black Peark optics. The surface is roughened before anodizing, thereby wirk dir surface even more noble and the part shimmers even in sunlight no longer in other colors, as you know it from many anodized parts. In addition, this surface fits perfectly with the fittings of the BMW motorcycles. The adapters are sold individually. Note for the R12 models with SOS button: The button can simply be unscrewed, then the original clamp can be replaced with the CNC-milled one.

This CNC machined aluminum clamp replaces the original armature clamps. Suitable for all for all BMW R9T models. The clamps look much nicer on the one hand, because they are very high quality milled from aluminum and have a nice, indicated BMW logo. In addition, the thread is a good bit shorter than the original part, which means that the mirror no longer sticks out so high.The mirror threads are M10 x 1.25 which allows you to mount all common mirrors from the accessories market. Of course, such a milled clamping is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time. The adapters are black matt (matching the original fittings) anodized & in the aftermath, the BMW logo is milled again. The clamps look very classy on the handlebars. The threaded adapter for the mirror we have extra round Designed, which gives you a much nicer transition to most mirrors than most other adapters on the market, which are simply angular. To the Motogadget M.View mirrors, the transition is perfect. The adapters are sold individually. Note for the R12 models with SOS button: The button can simply be unscrewed, then the original clamp can be replaced with the CNC-milled one.

Motogadget handlebar extensions that allow all Motogadget M.View handlebar end mirrors to be mounted without having to move the fittings on the handlebars further inwards.In addition, the Motogadget M.Blaze Disc handlebar end turn signal can be mounted on the outside of the adapter. It creates a clamping surface for the handlebar end mirror outside the steering tube and at the same time allows the mounting of the handlebar end turn signal. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise as well as mo.view street. It is CNC machined from billet aluminum and anodized black. The clamping in the handlebar end is done by tightening a M6 screw inside the adapter, which expands the clamping pieces and allows a stable mounting. Then the mirror clamp on the adapter is tightened and thus simultaneously clamped the handlebar end turn signal. The bar adapter uni disc/cone comes with two clamps for the left and right side of the handlebar. They fit perfectly to our grips mo.grip as well as the push button fittings mo.switch basic and mo.switch mini. They are mounted directly in the end of the handlebar (22 mm, 7/8 and 1 inch) with a free inner diameter of 12 to 21 mm (without internal thread) and a length of 90 mm. Dimensions:Fits all handlebars with 22 mm, 7/8 and 1 inch with a free inner diameter of 12 to 21 mm.Total length: approx. 105 mm, at least 90 mm free inner tube length requiredWidth of clamping surface for mirror: 8 mm, fits all mo.view handlebar end mirrors Diameter of clamping surface: 1 inch, fits all mo.view handlebar end mirrors Weight (1 piece): 55 g Scope of delivery:2 x bar adapter uni disc/cone, instructions Attention does not fit on motorbikes with original handlebars that are not hollow from the inside (which is the case with almost all original handlebars).

These chic end weights of the brand LSL fulfill several functions. On the one hand, they serve as a chic handlebar end to the other, they serve as a handlebar widening to mount all handlebar end mirrors that have a clamping diameter of 29.8mm. Who wants to use the weight only as a handlebar end and not for mounting mirrors, we recommend the matching handlebar weight ring to order (see accessories in this description). The weights are equipped with universal expansion dowels, which allow them to mount in almost all common accessory handlebars. Fits all handlebars with an inner diameter of 12 - 22mm. The weights are fine glass bead blasted before anodizing, giving them a very classy, slightly matte finish. In addition, they are supplied with a small cap, which comes into the clamping screw in front of head, which hides the screw head. Dimensions: Handlebar weight Ø: 36.6 mm Width: 20.5 mm Holder for handlebar end mirrors with outer clamp: Diameter: 29.8 mm Width: 12 mm Weight: 72 g Scope of delivery: 1 pair, incl. mounting material 2 x clamping sleeves each with Ø 12 and 16 mm 2 x spacer sleeves each with Ø 14, 18 and 21 mm 2 x M6 central screws2 x M6 cone nuts __________________________________________________ Note for mounting on BMW R9T models with original handlebars: The R9T original handlebars have a M10 internal thread. This can be drilled to 12mm, then it is possible to use the weights in combination with the original handlebar.

A PAAR aluminium screw in black anodized for the original mirror threads.Exactly the right one for everyone who has converted his motorcycle to handlebar end mirrors and would like to have the original mirror threads.Even more recommendable are the clamps, which remove the original mirror thread completely (see accessories in this description).

A pair of Motogadget handlebar extensions that allow all Motogadget M.View handlebar end mirrors to be mounted on the handlebars without having to move the fittings further inwards. Furthermore, the adapters in combination with the Motogadget bar end mirrors offer a perfect handlebar end (see photos).The adapter creates a clamping surface for the handlebar end mirror outside of the steering tube. Suitable for all Motogaadget bar end mirrors (see accessories in this description).The adapters are simply pushed into the handlebars (handlebars must be hollow from the inside, which is not the case with most original handlebars). Fits all handlebars with 22 mm, 7/8 and 1 inch with a free inner diameter of 12 to 21 mmTotal length: approx. 45 mm, at least 30 mm free inner tube length requiredwidth of the clamping surface for mirrors: 8 mm, fits all m.view handlebar end mirrors diameter of the clamping surface: 1 inch, fits all m.view handlebar end mirrors

The M.View Bar Clamp mirror adapters allow the mounting of all mirrors with M10 x 1.25 thread (this is the standard thread for accessory mirrors) on motorcycles without a mirror thread in the fittings. Or for customizers who want to give their handlebars a clean look and want to replace the original shots-Perfectly suitable are the beautiful M.View mirrors from our program (see accessories in this description). With these adapters the mirrors can be mounted both upwards and downwards (if there is enough space for the tank).The m.view bar clamp is delivered as a single piece. It fits perfectly to our handles m.grip, the handlebar end indicator m.blaze disc as well as the push button fittings m.switch and m.switch mini. The assembly takes place directly on the handlebar tube (22 mm, 7/8 and 1 inch).For two mirrors please order 2 m.view bar clamps. 

A pair of Motogadget handlebar extensions specially designed for all BMW R nine T models, which allow all Motogadget M.View handlebar end mirrors to be mounted on the handlebars without having to move the instruments further inwards. In addition, the adapters in combination with the Motogadget handlebar end mirrors offer a perfect handlebar end (see photos).The adapter creates a clamping surface for the bar end mirror outside the steering tube. Suitable for all Motogadget bar end mirrors. We also recommend the Motogadget handlebar grips, which have exactly the same outer dimensions as the mirrors and the adapters, then you have a completely clean line on the handlebar.The special adapters, developed for the R nine T models, allows a very easy and very fast mounting on the original handlebars of the BMW. Simply remove the original bar end caps from the handlebar screws and screw the new Motogadget adapters into the original handlebar. Fits all BMW handlebars with M12 thread Total length: approx. 47 mmwidth of the clamping surface for mirrors: 8 mm, fits all mo.view handlebar mirrors diameter of the clamping surface: 1 inch, fits all mo.view handlebar mirrors Weight (1 piece): approx. 50 g The adapters are supplied as pairs.

A pair of Motogadget handlebar extensions + mounting for Motogadget Disc handlebar end mirrors especially designed for all BMW R nine T models, which allows to mount all Motogadget M.View handlebar end mirrors on the handlebars without having to move the instruments further inwards. In addition, the Motogadget Disc handlebar end indicator is clicked onto the end of the adapter. This ensures an absolutely perfect and transition free line! Furthermore the adapters in combination with the Motogadget handlebar end mirrors offer a perfect handlebar end (see photos). The adapter creates a clamping surface for the bar end mirror outside of the steering tube. Suitable for all Motogadget bar end mirrors. We also recommend the Motogadget handlebar grips, which have exactly the same outer dimensions as the mirrors and the adapters, then you have a completely clean line on the handlebar. The special adapters, developed for the R nine T models, allows a very easy and very fast mounting on the original handlebars of the BMW. Simply remove the original bar end caps from the handlebar screws and screw the new Motogadget adapters into the original handlebar. Fits all BMW handlebars with M12 thread Total length: approx. 47 mmwidth of the clamping surface for mirrors: 8 mm, fits all mo.view handlebar mirrors diameter of the clamping surface: 1 inch, fits all mo.view handlebar mirrors Weight (1 piece): approx. 50 g The adapters are supplied as pairs.

High quality and noble handlebar weight of Rizoma. The weights are either black or sillber anodized. It is available with a plastic end cap or without (the black cap does not only add a color accent, but this is individually interchangeable, if you get scratches on a wall or so). The weights fit into any high-end accessory handlebar from 22mm to 1 "since different adapters are included in the scope. The handlebars are also suitable for attaching / clamping some Rizoma handlebar mirrors. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

BMW R9T adapter for mounting Rizoma handlebar weights on original handlebars. The price is for a single adapter, so if you need a pair please order 2x.

This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

Since BMW uses its own mirror system, no accessory mirror can be screwed into the original threads. In order not to have an unsightly adapter in between, the complete original thread can be exchanged with this clamping block.Mirror adapter kit to M10x1,25. pair. Note for the R12 models with SOS button: The button can simply be unscrewed, then the original clamp can be replaced with the CNC-milled one.

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.  

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.  

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.  

For all Fatbar Handlebars (R9T & Scrambler) For all Fatbar accessories handlebars as used on all R9T models (does not fit the original handlebar) The price is for one pair.