MotoIsm Fork Clamps - LED Turn Signal

Product information "MotoIsm Fork Clamps - LED Turn Signal"

Gebl clamps with integrated LED turn signals.
These clamps are perfect for a custom conversion, where it can not find a good position to install conventional turn signals.
The two-piece fork clamps must be simply put over the fork and fixed with two screws for installation.
The wiring runs integrated in the clamp and provides a tidy and clean look.
There are the clamps in 3 different dimensions (Please measure your fork standpipe and order the correct diameter measure), which you can choose in the selection.

The turn signals have an E-mark and is approved as a front turn signal.

The clamps from MotoIsm (Made in Germany) are made of a high quality carbon fiber reinforced plastic.

 

Classicbike-Raisch mounting tips & resistors:

The company MotoIsm really makes an effort to make the connection of their indicators as simple and customer-friendly as possible.
There are adapter cables from Motogadget with which you can connect their indicators directly to the wiring harness (without cutting/soldering plugs or similar).
These adapter cables also have built-in resistors which ensure that your R9T has the correct flashing frequency. So there's no need for tedious trial and error.
Our recommendation is to order one of these adapters at the same time! You can find the adapters under accessories in this product description.

BMW R12
R12 Crusiser
R12 nineT
Triumph 400er
Scrambler 400 X
Speed 400
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Speed Twin 1200 EU 4
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
600
600
600
600

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

MotoIsm - Indicator plug - BMW CB12675M / RS0
The Motoism blinker plugs can be connected to all Motoism indicators on one side and simply plugged into the original wiring harness of your BMW on the other side. No annoying cutting, soldering or similar. The plugs also have an integrated resistor. This ensures that the indicators flash at the correct speed/frequency, and a list of which blinker plug is required for which motorcycle can be found under the description. You can also compare your original indicators with those in the product images in this description and see which adapter you need.   R nineT/ Scrambler 2014-2016 - BMW V1 adapter R nineT/ Scrambler/ Race/ Urban G/S/ PURE/ /5 2016-2020 - BMW V1 adapter R nineT/ Scrambler/ PURE/ Urban G/S (EURO 5) 2021 - BMW V3 adapter

From €29.90*
MotoIsm - Indicator plug - Triumph CB12677M / RS0
The Motoism blinker plugs can be connected to all Motoism indicators on one side and simply plugged into the original wiring harness of your BMW on the other side. No annoying cutting, soldering or similar. The plugs also have an integrated resistor. This ensures that the indicators flash at the correct speed/frequency, and a list of which blinker plug is required for which motorcycle can be found under the description. You can also compare your original indicators with those in the product images in this description and see which adapter you need.   Bonneville Bobber/Black (EURO4/5) 2017-   :   TRIUMPH V2 Adapter Bonneville speedmaster 2018-    :   TRIUMPH V2 Adapter Bonneville T100 2017-   :    TRIUMPH V1 Adapter Bonneville T120 2016-   :    TRIUMPH V1 Adapter Scrambler 1200 XC/XE (EURO 4) 2019-2021   :   TRIUMPH V2 Adapter Scrambler 1200 XC/XE (EURO 5) 2021-    :   TRIUMPH V2 Adapter Scrambler 400 X 2023-    :   TRIUMPH V2 Adapter Speed 400 2023-    :   TRIUMPH V2 Adapter Speed Twin 1200 (EURO 4/5) 2019-   :    TRIUMPH V2 Adapter Speed Twin 900 2023-    :   TRIUMPH V1 Adapter Street Scrambler (EURO 4) 2017-2021    :   TRIUMPH V1 Adapter Street Scrambler (EURO 5) 2022-    :   TRIUMPH V1 Adapter Street Twin 900 (EURO 4 / 5) 2016-2022.  :    TRIUMPH V1 Adapter Thruxton 1200/R/RS (EURO4/5) 2016-    :   TRIUMPH V1 Adapter

From €29.90*
Indicator light for LED indicators CB10732 / RS600
Is needed if you install LED turn signals and do not replace the flasher relay. One set is enough for a pair of turn signals. These resistors are the universal solution for virtually all vehicles and all LED turn signals, if there is a problem with the flashing frequency (even on models where you can set the frequency in the speedometer). It is also sufficient if you install a set of resistors (usually offers better for space reasons in the back), although you install 4 LED turn signals on the vehicle.

€14.95*
Indicator original Triumph connector CB10742 / RS-100
The matching flasher in the set (4 pieces for a pair of turn signals) in order not to cut the original wiring harness. These plugs are crimped onto the cables of the turn signals and can then be easily and quickly inserted on the cable harness side.

€9.95*