LED Stripe Tail Tidy BMW R9T
€309.00*
| Product number: | CB12076 |
| item number: | 211257653.1 |
Classicbike-Raisch LED Stripe rear suitable for all BMW R nineT models. Street legal!
The LED Stripe rear is the most noble & elegant rear for nineT models that we have in our range.
The rear of your nineT is given a minimalist & modern look with this kit, through the filigree milling bracket and the modern LED strip & completely legal!
The tail light with breaklight is with E-number and the tail complies with all StvO standards. Here nothing needs to be registered with the TÜV. Simply attach & enjoy.
The LED bracket milled from aluminum fits perfectly to all BMW original seats as well as the BMW hump. A perfect fit on all seat benches is guaranteed by the spacer kit, which is included. This kit contains different spacers to distance the height of the milling bracket perfectly to the respective installed seat.
The kit of course also works with numerous seat benches from the accessories, such as the Cool Seat from our range.
Also with the passenger pillion frame everything fits perfectly.
The bracket for the LED strip is milled from an aluminum block in Germany and then anodized deep black.
The LED strip (with E-number) is then glued into the milling bracket. This makes the part look like it was cast from one piece.
Included in the kit is an aluminum underbody plate, which replaces the original plastic shell.
For the R nineT Euro 4 & 5 models, the plastic box for the control unit is also replaced. This is unsightly on the one hand because it is made of plastic and on the other hand because it builds up very low and thus disturbs the line of the rear area. Through the new aluminum sheet you no longer look from the side on the edge of the box & the rear gets a perfect line.
The scope of delivery includes all materials, such as screws, cable ties, heat shrink tubing, connectors, etc., as well as a very detailed step by step instructions to ensure easy & problem-free installation.
To buy the kit reduced in the set, simply below the description, the accessory items such as turn signals, reduced order.
License plate holder: The kit is delivered WITHOUT a license plate holder.
Since the kit looks just awesome with both a central and a side license plate holder!
Our recommendations:
Variant 1: License plate holder HeckWeck R9T / This holder is mounted centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant does NOT need to be registered). This is the holder, which is also mounted on some product photos.
Variant 2: License plate holder HeckWeck R9T - Short / This holder is mounted as in variant 1 centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant must NOT be registered). The difference to variant 1 is that the short version is much shorter and has an adjustment for the angle of the license plate. This allows us to mount the license plate significantly shorter (steeper than 30 °) but for TÜV or controls within a handle to be able to put down to 30°.
Variant 3 Side license plate holder:
There are 4 different holders to choose from:
1. the Vario holder: an inexpensive (but still very high quality) holder reduced to the bare essentials (the most inconspicuous of all), which fits all license plate sizes and is variably adjustable in position - must be registered individually.
2. the Rizoma holder: Probably the highest quality holder of all. This holder is supplied with a parts certificate and can simply be fitted (does not have to be registered with the TÜV).
3. the adjustable bracket: A sophisticated bracket with an aluminum license plate, which also has variable adjustment. Must also be registered by individual approval.
4. The AC-Schnitzer holder: A license plate holder milled from solid material with parts certificate.
Turn signal:
In the milling bracket is on both sides a 8er bore, this allows it to mount any turn signal with an M8 thread. He is held turn signal by a grub screw, which is included.
Who does not want to mount a turn signal on the bracket, which can order the turn signal plugs (further down in this description). These then serve as blind plugs for the turn signal hole.
Further down in this description you can order all, to the rear matching turn signals, from our range in the bundle.
In the bundle you will automatically be granted a discount of 10% on all turn signals.
Accessories:
Classicbike-Raisch recommends for easier installation still turn signal plugs & tail light plugs.
For all those who want to be 100% legal on the road, there is still a reflector as an accessory.
To mount the license plate, we recommend the license plate screw set.
All parts you can order below in the description with it.
To buy the kit reduced in a set click on the button "buy this item in a set" above under shopping cart
Luggage:
The LED bracket goes to the same mounting points as most luggage systems.
Together with the LED stripe rear, the Unit Garage bags can be mounted.
Note on the BMW alarm system: Our base plate does not have any fixing points for the alarm system. If you would still like to have it installed, we recommend attaching the alarm system with double-sided adhesive tape.
| Models BMW R nineT: |
|
|---|
| BMW R nineT |
R nineT /5 EU 4
R nineT Classic EU 3
R nineT Classic EU 4
R nineT Classic EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
|
|---|
Zubehörartikel
