Legend Gear SLC Luggage Bag Holder - BMW R12

Product information "Legend Gear SLC Luggage Bag Holder - BMW R12"

SW-Motech SLC side carrier for BMW R12 models (the holder does not fit on the Cruiser in combination with the short BMW rear).


The precise, model-specific development of the SLC side rails allows simple and safe mounting at original mounting points on the vehicle. The Legend Gear LC1/LC2 side pockets can be attached and removed within seconds using a quick-release system or in just a few simple steps, without the driver having to do without a reliable bag attachment. Also very suitable for a variety of pockets which you can then simply screw on the 3 fixing points.

    The SLC side rail, individually designed for the BMW R nineT Classic, Urban, Pure, Racer & Scrambler, blends in perfectly with its appearance
    Model-specific shape allows easy mounting on one or two sides.

    Material: steel tube

advice

    The SLC side rail is also compatible with the universal side bracket for fixing all kinds of things.

scope of supply

    SLC side rail left
    installation material

Models BMW R nineT:
  • R nineT /5 EU 4
  • R nineT Classic EU 3
  • R nineT Classic EU 4
  • R nineT Pure EU 4
  • R nineT Racer EU 4
  • R nineT Scrambler EU 4.
  • R nineT Urban GS EU 4
BMW R12
R12 Cruiser
R12 nineT
600
600
600
600

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Legend Gear side bag 9,8l BMW CB10981M / RS1
Legend Gear side bag LC1 9,8l for BMW R9T Classic, Scrambler, Urban GS, Pure & Racer (Fits on the scrambler left only together with lower exhaust) / The matching holder is NOT included. This must be ordered separately. The matching holder can be found underneath the description in the accessories.The LC1 side pocket combines classic looks with contemporary handling. The bag can be attached to and removed from the SLC side pocket carrier in a few easy steps using a quick-release system. Robust Napalon imitation leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series.    Model-specific SLC side pocket carrier made of sturdy tubular steel ensures reliable hold (order separately)    Quick-release fastener made of glass-fibre reinforced polyamide allows the side pocket to be attached and removed in seconds    Single or double-sided mounting    Side pockets available as left or right, small or large version (LC1/LC2)    LC1 side pocket also suitable for bikes with top-mounted exhaust thanks to its compact shape    Rain protection by roll closure, water-repellent material and waterproof inner pocket    Low weight with an attractive design    Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated    size: 14 x 26 x 31 cm    Capacity: 9,8 lScope of delivery:    1 Legend Gear Saddlebag LC1 (left)    1 waterproof inner pocketImportant notice:    To protect the natural fibre from weather influences, we recommend impregnating the cotton textile surface of the product at regular intervals or after intensive cleaning with a commercially available wax impregnation (e.g. from Fjällräven).Available for left & right. On the scrambler the bag fits only on the right side).

From €145.00*
Template for SW-Motech SLC side pocket holder CB11867 / RS20
This template has exactly the same dimensions as the screw connections of the SW-Motech SLC holders. So it is easy and fast to transfer the hole pattern perfectly to any bag to screw it to the stylish SW-Motech holders.

€4.95*
MUD leather side bag system CB12598M / RS-1
Genuine craftsmanship from Italy! The MUD leather bag system is the perfect combination of functionality, old school leather bag look & absolute high end quality / workmanship. The bags are handmade in Italy from very thick leather. A nice soft leather is used to get the casual hanging backpack look and to allow the height variable roll up closure.   Fastening system:The best thing about these bags is that they not only look good, but they also have a very good & practical fastening system.The bags have the SYS quick fastening system on the back. Thanks to this system, the bags can be attached to and removed from the motorcycle with a flick of the wrist and a click.In addition to the bags, a motorcycle model-specific SW-Motech Legend Gear SLC luggage holder is required (you can find this under accessories in this product description). Tip: If you already have a Legend Gear luggage system fitted to your motorcycle, you can simply replace your SW Motech bag with the MUD Bag.   Waterproof: The leather of the bags is properly oiled at the factory, making the bags water-repellent. In other words, if you get caught in a rain shower, the bags will easily remain waterproof. If you get caught in a really heavy downpour on a motorcycle tour, a waterproof rain cover is also included. Additional belt pouch:There is another small pocket on the front of the bag, this can also be removed if necessary and used as a belt pouch (very practical for storing expensive valuables, for example, that you don't want to leave on your motorcycle when visiting your favorite pub). Magnetic fasteners:Retro look paired with state-of-the-art magnetic fasteners! The Mud Bag uses classic leather straps with belt buckles as fasteners. However, because such fasteners are not exactly practical, a modern magnetic fastening system is hidden under the belt buckles. The system can be opened and closed in a single movement.The belt buckle therefore only serves as a fixed length adjustment for the leather strap. Roll up closure / variable size: To close the mud bag, it is rolled up at the top like a classic messenger bag. This looks cool and allows you to make the bag bigger and smaller if necessary. Thanks to the roll-up closure, the bag has a height of 35 to 45 cm. Extra strap: The bags are available with or without extra leather straps on the sides of the bag. With the bag with the extra straps you can attach things to the left and right of the bag, such as a water bottle, a camera tripod or other things. Inner lining:A bright orange fabric was carefully chosen as the inner lining to make it easy to find your things in the bag. The contrasting and bright color really makes it much easier to find individual items. The inner lining is also washable.   Size / Volume: Height: 35 - 45 cm Width: 33cmDepth: 17cmVolume: 20 - 25 liters

From €530.00*
Legend Gear side bag 13,5l BMW CB10982M / RS1
Legend Gear side bag LC1 13,5l for BMW R9T Classic, Scrambler, Urban GS, Pure & Racer (Fits on the scrambler left only together with lower exhaust) / The matching holder is NOT included. This must be ordered separately. The matching holder can be found underneath the description in the accessories.The large 13,5l bag fits only on the right side due to the original exhaust!The LC2 side pocket combines classic look and contemporary handling. The bag can be attached to and removed from the SLC side pocket carrier in a few easy steps using a quick-release system. Robust Napalon imitation leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series.    Model-specific SLC side pocket carrier made of sturdy tubular steel ensures reliable hold (must be ordered separately!)    Quick-release fastener made of glass-fibre reinforced polyamide allows the side pocket to be attached and removed in seconds    Single or double-sided mounting    Side pockets available as left or right, small or large version    Rain protection by roll closure, water-repellent material and waterproof inner pocket    Straps for attaching the shoulder strap LA4 (see Accessories)    Low weight with an attractive design    Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated    size: 14 x 35 x 31 cm    Capacity: 13,5 lScope of delivery:    1 Legend Gear side pocket (right) LC2    1 waterproof inner pocketImportant notice:    To protect the natural fibre from weather influences, we recommend impregnating the cotton textile surface of the product at regular intervals or after intensive cleaning with a commercially available wax impregnation (e.g. from Fjällräven).  

From €170.00*
Start license plate for SLC holder CB12049M / RS600
SW-Motech start number plate suitable for all Sw-Motech Legend Gear SLC bag holders (matching holders see ZUbehörartikel in this description). The plate is made of brushed aluminum and looks very high quality. On request, we can also coat this black powder for an additional charge. The sign is very easy, just like the Legend Gear bags with the quick release system clicked into SLC holder. Perfectly suited for all who have installed the SLC holder and do not always want to have the bag on the bike but do not want to look at the holder.

From €55.00*