€0.00*

Roadstar tail tidy BMW R nineT

€659.00*

Prices incl. VAT plus shipping costs

product-image
Zubehörartikel
€119.95*
from €199.00*
€480.00*
€390.50*
€279.00*
Product number: CB12827.1
item number: 1699_UP
Product information "Roadstar tail tidy BMW R nineT"

Short Unit Garage 1-piece rear fender for your BMW R nineT Roadster

The shortest rear end for true individualists

Are you looking for one of the most compact and stylish rear ends for your BMW R nineT Roadster? With the Unit Garage 1-piece rear fender, you can take your bike to a new level! This rear fender is one of the shortest currently available on the aftermarket for the nineT Roadster – perfect for a clean, minimalist look.

Optimized for the R nineT Roadster and Classic models

On the Roadster and Classic models of the BMW R nineT, the pillion frame and the entire rear frame can be removed and replaced with screws. This makes it super easy for you to convert to a sleek 1-man rear end. But let's be honest: if you just remove the rear frame and the pillion pad, the rear often looks unfinished. This is where the Roadster rear end from Unit Garage comes in.

With this rear end, you not only get the option of removing the pillion section, but also a clean and stylish finish – so your bike looks great all round!

Complete kit with everything you need

The kit includes everything you need for the conversion:

  • Detailed assembly instructions
  • All the necessary mounting materials

The conversion is quick and easy, so you can get started right away!


Lighting: modern LED technology

The kit includes an LED stripe rear light that combines a rear light, brake light and turn signal in one. Particularly cool: the turn signals light up at the ends of the stripe (watch the video in the product description).

Note: The rear light does not have an E-number/approval. However, in our experience, there are no problems with authorities because the rear light and turn signals are very visible.

Compatible with side license plate holders

The 1-man rear fender is compatible with all side license plate holders in our range. You can find these directly below the product description in the accessories.

Paintwork

The rear kit is available directly from the manufacturer Unit Garage in a range of colors (these are all compatible with the Unit Garage tanks that we also have in our range).
The kit is also available in RAW/unpainted, so that you can then have the rear painted in your favorite motorcycle color.


BMW R nineT
R nineT Classic / Roadster EU 3
R nineT Classic / Roadster EU 4
R nineT Classic / Roadster EU 5
100
100
100
100

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Side license plate holder - Vario R9T
Side license plate holder - Vario R9T CB12560 / RS-1
The side Classicbike-Raisch Vario license plate holder for all BMW R nineT models has a sophisticated mounting system, which makes it possible that the license plate holder on the one hand looks good and does not protrude too far to the outside and is legal and registrable. Through various mounting holes, it is possible to set the license plate far to the outside. This then allows a registration with your TÜV inspector of confidence.Side license plate holders do not necessarily need an ABE, to register them they must only comply with the StvO guidelines, which is given with our Vario holder, if the license plate is mounted at the outermost position. After registration, the license plate can then be placed further inwards for a nicer look. The product pictures illustrate the adjustment range of the license plate. Please clarify in advance with your TÜV inspector whether he will register the license plate holder (if necessary, we can provide a sample registration). The license plate carrier has a dimension of: Height = 100mm / Width = 155mm - The dimension is small enough to accommodate all motorcycle license plates in the world. Included in delivery: - Side license plate holder - Mounting material + cable for the license plate light - LED license plate light- Detailed step by step mounting instructions   Classicbike-Raisch Tip: If you want to mount your license plate as unobtrusively and coherently as possible, we recommend ordering a set of license plate screws (you can find them under the accessories in this description).

€119.95*
Side Mount Lizenz support R9T
Side Mount Lizenz support R9T CB11929M / RS0
Three-part license plate holder made of 3mm aluminium or stainless steel for all BMW R nineT models, from our friendly company KRT Framework.As well as all parts, which come from KRT, also the lateral license plate holder is of the highest quality and absolutely perfectly designed.The delivery includes all mounting materials and a license plate light.The two aluminium support plates allow an assembly where screws and cables disappear. Long holes paired with three different hole patterns allow the assembly in your desired position (side and height is adjustable).There is the license plate holder with different plates for the countries (Germany, Austria, Switzerland, France, Holland, Belgium. Please choose in the selection).Dimensions of the license plates for the different countries: Germany: 180 x 200 mmSwitzerland: 180 x 140 mmAustria: 210 x 170 mmFrance: 210 x 130 mmNetherlands: 210 x 140 mmBelgium: 210 x 140 mmItaly: 177x177 mmSpain: 220x160 mmUSA: 178x102 mm

From €199.00*
Details
Rizoma Side Arm Kennzeichenhalter R9T
Rizoma Side Arm Kennzeichenhalter R9T CB11223 / RS0
The "Side Arm" kit is made up of an identification plate, which can be attached to the side arm. The "Side Arm" is a special styling for all demanding aesthetics, License plate light, reflector and a new rear under-fairing replacing the OEM component. The "Side Arm" kit eliminates the OEM tail light and turn signal. We recommend this with a taillight / turn signal combination (these connect taillight, turn signal & brake light in one), which makes for a fantastic look (appropriate holders are included in the kit, or you drill holes in the undercover). The turn signals are then mounted as in the photos to the left & right of the license plate). It is best to order it at the same time - you will be delighted! Optionally, we also offer you two optically cool rear wheel fenders. see accessories

€480.00*
Rizoma Side Arm / Outside BMW R9T
Rizoma Side Arm / Outside BMW R9T CB11226 / RS0
The Rizoma license plate holder WITH undercover "Side Arm" is a particularly stylish eye-catcher for every demanding aesthete who would like to mount the license plate sideways to get a free rear end.The "Side Arm" kit consists of a license plate holder, license plate light and a new rear undercover, which replaces the OEM component. By mounting the "Side Arm" kit, the OEM tail light + turn signal is no longer necessary. We recommend this by a tail light/indicator combination (these combine tail light, indicator & brake light). The holder is supplied with ABE. So it does not have to be registered.

€390.50*
License support sideways - AC Schnitzer
License support sideways - AC Schnitzer CB10597.1 / RS18
Modell BMW: R9T
AC Schnitzer license plate holder, for side mounting of the license plate with TÜV parts certificate. Manufactured from high quality aluminium, black anodized and with accent milling to give the surface an even higher quality finish.As usual, top quality from AC Schnitzer.The scope of delivery includes an LED license plate light, as well as all the necessary installation materials and installation instructions. Perfect for anyone who wants to fit a clean rear without a license plate or a short aluminium mudguard. The practical thing about this license plate holder is that it does NOT have a license plate plate. This means that it can be used optimally for any license plate size. With parts certificate means that the license plate holder is supplied with TÜV papers and can be easily (and cheaply) registered.   License plate size:The mount for the license plate has a dimension of 150mm height - 110mm width. In other words, all license plates that have at least this dimension can be optimally installed and cover the holder.Suitable for all countries.

€279.00*