A pair of CNC machined aluminum caps for all BMW R nineT models with Tele fork. Matching our BMW Milled series, there are now also the fork crown caps. These replace the rather simple silver caps on the R9T fork. The caps are easily replaced within a few minutes against the original. To install the fork does not have to be removed (it must only be relieved, for example, in which the motorcycle is jacked up, or pulled by a second man on the side stand) and no special tools are needed. An assembly instruction is included in the delivery, The Milled caps are manufactured in a very noble Black Pearl surface. That is, they are blasted before the black anodize, Glasperenl. This gives its very fine, slightly matte surface which feels and looks very high quality. Classicbike-Raisch recommendation: Order the plastic tool as well, with which it is very easy to fit the Milled caps without scratches and scratches (see accessory article in this description).

A pair of aluminium standpipe covers with integrated LED turn signals for BMW R nineT. These very high-quality fork covers ensure that the mismatching chrome on the fork disappears and that the fork appears thicker (like an upside down fork). In addition, tiny LED turn signals are integrated into the covers. This does away with the large original turn signals and gives the nineT a really nice clean front.The turn signals are E-numbered and also comply with the prescribed minimum distance (so they are Stvo compliant and legal). The tubes are elaborately turned on a CNC lathe, have guides for the cables and rubber rings milled into them from the inside. On the outside they have a small flat surface on which the mini LED turn signals are mounted.After that, the covers are glass bead blasted and then anodised either silver or black. This gives the covers a very high-quality matt finish. The covers are supplied with detailed step-by-step assembly instructions, cable solder connectors, heat shrink tubing and resistors (which are required for some models)   Note Scrambler / Urban GS cover:The indicators on these covers are now mounted horizontally to make them even more inconspicuous.

Covers for the original reflectors on the forks of all BMW R nine T & R12 models As with all motorcycles since the Euro 4 standard, reflectors are also glued to the forks of the BMW models. It looks absolutely awful, but unfortunately it's mandatory. We have a chic solution here that covers the reflectors but can also be removed at any time. Our high-quality aluminum covers give your motorcycle a classy and individual look. They not only enhance the look, but also integrate seamlessly into the design of your machine. Easy installation: The covers are simply put over the existing reflectors and fixed with a grub screw on the underside. Installed in just a few seconds and removed just as quickly – with no effort at all. Three stylish options to choose from: Silver: Raw aluminum that you can either leave as is or polish to a shine. For the perfect finish, we recommend the Motul aluminum polish (see accessories). Black: Completely black anodized aluminum for a subtle, elegant look. Black with contrasting milling: Black anodized and subsequently milled for a special accent that attracts attention. Scope of delivery: The covers are delivered as a pair.

A pair of Gaeblrohr covers made of lightweight aluminum in black powder coated or silver anodised. Through the cover, the fork looks much more massive (because it seems wider), which makes the fork look significantly higher quality and ensures a lasting better look. The tubes are supplied as a plug & play solution with rubber rings and installation instructions. Fits on the Urban GS only when the indicators on the fork are turned off.

New from MotoIsm - the two-piece fork covers.These innovative fork covers are very quick & easy to fit. Thanks to the two-part design of the covers, they can simply be slipped around the fork and fixed in place with the supplied cable ties (which are on the inside and not visible). The fork does not have to be removed, it couldn't be easier. The covers can be fitted in no time at all. The covers from MotoIsm (Made in Germany) are manufactured from high-quality, carbon fiber-reinforced plastic using a 3D printing process. MotoIsm produces the highest quality 3D-printed parts on the motorcycle market. The surface has a very nice & smooth feel.   No disassembly of the fork or upper triple clamp necessary Innovative, two-piece SEAMLESS design  Cable routing inside the cover Separating joint invisible from the side and front Special cable ties with a particularly flat design are routed inside the component High-quality paint finish in matt black Headlight brackets can be easily fitted to the covers   Attention only fits on the Urban GS if the original lamp cover has been removed.

New from MotoIsm - the two-piece fork covers with integrated indicators. These innovative fork covers are very quick & easy to fit. Thanks to the two-part design of the covers, they can simply be slipped around the fork and fixed in place with the supplied cable ties (which are on the inside and not visible). The fork does not have to be removed, it couldn't be easier. The covers can be fitted in no time at all. LED SMD indicators with E-number are integrated in the covers. This kills two birds with one stone (inconspicuously mounted indicators that are still clearly visible from the front and a more attractive fork). The covers from MotoIsm (Made in Germany) are manufactured from high-quality, carbon fiber-reinforced plastic using a 3D printing process. MotoIsm produces the highest quality 3D-printed parts on the motorcycle market. The surface has a very nice & smooth feel. The matching blinker plugs including the matching resistors can be ordered directly: Matching blinker plugs with integrated resistors are available for the Motoism indicators. These guarantee a problem-free connection (simply plug the connector into the original wiring harness) and a suitable flashing frequency. These plugs can be found under accessories in this product description.   No disassembly of the fork or upper triple clamp necessary Innovative, two-part SEAMLESS design  Ultra-bright thanks to LED technology - 5 SMDs With E-mark - Street legal Cable routing inside the cover Separating joint invisible from the side and front Special cable ties with particularly flat design are guided in the component High-quality paint finish in matt black Headlight brackets can be easily fitted to the covers

CNC-milled aluminum crash pads from Rizoma. Unfortunately, crashing your motorcycle is always an unpleasant topic. In the event of a crash, the fork and swingarm of the motorcycle are always the first to come into contact with the asphalt. To protect the fork in the event of a fall, we recommend fitting crash pads to the fork legs. As crash pads often do not look attractive, Rizoma offers the solution here. The Rizoma crash pad is so elegantly finished that it even enhances the appearance of the R12.

Elimination of telescopic fork breakaway torque.   Another new development of Motorrad-Technik CZECH in the field of synthetic lubricants.   The application of HKS GGV completely eliminates the so-called telescopic fork breakaway torque. The smallest bumps and the like are no longer transmitted from the unsprung part of the telescopic fork to the motorcycle. The result: silky smooth, supple handling and the safest possible ground contact. A noticeable benefit! In combination with a HKS extremely lubricated chain results in a "buttery smooth ride"!!! A breakaway torque no longer exists!   Package size:100 ml drip-on plastic bottle     Instructions for use HKS GGV 100 ml drip-on plastic bottle External application: Rub 3-4 drops of HKS GGV on the sealing lip of each fork leg with your finger.Repeat every 1,000 - 1,500 km. Internal application: Add 2 ccm HKS GGV per 100 ccm fork oil.  

Some very high-quality rubber bellows for the telescopic fork of the BMW R9T Euro 4 models.Included in delivery is a pair of metal cable ties for fastening the bellows.

Original BMW fork Simmering + Staubzuschzkappe for all BMW R nineT models. The Simmerrings should be made new at each fork revision. The set consists of 2x fork oil seal - 2x dust cap.