Hyperpro Black Line steering damper kit (with bracket) for BMW R nineT & R12 models. With ABE road approval. All BMW R nineT models as well as the new R12 models are equipped with a steering damper (which is much too hard) ex works. This causes extremely poor and sluggish steering behavior. This problem is solved with an adjustable steering damper, which can be set considerably softer than the original, and the motorcycle is easier to turn and significantly more agile and manageable.We highly recommend that every R nineT driver install a new steering damper. The motorcycle is then much easier to ride. If you want to test it in advance to see how big the difference is, simply remove the original damper and take a test ride without the damper. The Hyperpro steering damper has a 75mm stroke and can be adjusted in 24 clicks. The damper is a linear CSC damper. Delivered with ABE, so does not need to be registered.

Öhlins steering damper for all BMW R nineT models. Since the original steering damper of all R9T models is much too hard and has no adjustment, the motorcycle can only be turned very ponderously. Therefore, it is highly recommended to install a steering damper with adjustment and to set this relatively soft. This makes the motorcycle much easier to handle. If you want to test this, you can simply remove the original damper and go for a ride (then you will immediately notice how much better the bike rides). You just can not leave it permanently, because the operating license expires without Lenkunksdämpfer. The steering dampers are supplied with ABE. So these do not have to be registered at the TÜV.