DB-Killer IXIL
€60.00*
Available, delivery time: 1-3 days
Zubehörartikel
from €1,054.00*
€566.95*
from €930.00*
from €1,289.00*
from €980.00*
€566.95*
€566.95*
from €1,006.00*
| Product number: | CB12367 |
| item number: | 211257697 |
Product information "DB-Killer IXIL"
To be able to remove the DB killer on IXIL exhaust systems, a welding spot must be drilled out and milled away.
Who does not want to do this work yourself, it can be ordered here with it.
After that you can then fix our Racing DB-Killer with a supplied screw. To mount the original DB-killer two screws + nuts are needed.
Attention the delivery of the exhaust system may be delayed by the removal of the DB Killer 1-3 working days (depending on the order situation in our workshop).
| Triumph LC models from 2016: |
|
|---|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
|
|---|
0
0
0
0
There aren't any asked questions yet.
Zubehörartikel
Zard Street Twin Low
CB11096M
/ RS600
From
€1,054.00*
The Zard Short exhaust system for the Street Twin / Street Cup is probably the shortest exhaust on the market. It runs directly under the engine and ensures that the entire rear wheel remains clear.
Completely made of stainless steel with ABE (road approval), it fits on the original manifold and is a plug & play replacement for the original rear silencer.
The Zard Short exhaust is a visually very nice short & crisp exhaust in a classic design that fits perfectly to the Street Twin / Cup. In terms of sound, the Zard exhaust system gives you a beautifully rich and muffled sound. The workmanship of the exhaust system is very high quality in the classic Zard manner.
In order to be able to remove the DB-Killer from the exhaust system, a welding point that is difficult to access must be drilled out and milled away. As this takes about half an hour of work, we have to charge extra for this.If you would like to have this done, you must order the additional item "DB-Killer removal Zard exhaust CB11514" (see accessories in this description)
There are special racing DB-killers developed by us for the exhaust for more sound than standard and also more power (as the original DB-killer is quite closed). For the sound you want. See accessories in this article description.
For Swiss customers, the exhausts can be supplied with a declaration of suitability.
IXIL Bonneville
CB11150
/ RS600
€566.95*
IXIL stainless steel slip-on exhaust for Bonneville. With E-number & removable DB-killer.
FOR T100 WITHOUT ABEEuro 5 models from 2021: The exhaust also fits these models. However, it is NOT homologated for the Euro5 models (ie the model is behind the E-number on the exhaust is not deposited with).
A really nice short muffler that provides a really sporty line. The exhaust provides in addition to the sporty short optics also for the suitably pithy sound, which must have a 2-cylinder. Really nice muffled & bassy.
There are special racing DB killer developed by us for the exhaust for more sound than series and also more power (because the original DB killer is quite too). For a sound as you want it and still have a DB killer installed, making it look completely legal. See accessories in this item description. The original DB-killers are also attached with a spot weld at the factory. To be able to remove the DB-Killer, this spot weld must be milled away (then you can fix it einrach with a screw and quite simple one & remove). If you do not want to do this work yourself, you can also let us do it. See for it accessory article in this description "DB Killer removal".
Who wants to have the exhaust system coated in black ceramic, which can be done by us. For this, order the accessory article (in this description) exhaust ceramic coating in addition. After that, the mufflers are completely black (the IXIL logo is then also no longer visible).
Zard Six Days Street Scrambler
CB11360M
/ RS0
From
€930.00*
Zard 2-2 High exhaust system with E-number for Triumph Street Scrambler.
With E-number for Euro 4 & Euro 5 models.
The exhaust gives the scrambler a whole new look. The two very very chunky original dampers are replaced by the short and crisp Zard stainless steel dampers. Also the sound is great! Really nice dull. Click here for the Soundcheck
The exhaust is equipped with removable DB-killers for all who would like the sound to be even more nimble.In order to remove the DB-Killer from the exhaust system, a welding spot that is difficult to access must be drilled out and milled away.If you want to have this done, you have to order the additional article DB-Killer Zard Exhaust CB11514 (see accessories in this description).
The exhaust is available as a road version (with EC approval) and as a racing version (without EC approval). Due to the low interest we do not have the racing system in stock (delivery time on request).
Black: The complete exhaust system is supplied with a black ceramic coating.
There are special Racing DB-killers developed by us for the exhaust for more sound than series and also more performance (because the original DB-killer is quite closed). For the sound you want. See accessories in this item description.For Swiss customers, the exhaust can be delivered with a declaration of suitability.
Zard Short - Bonneville
CB11368M
/ RS0
From
€1,289.00*
A beautiful, short exhaust system for the Bonneville T120 - T100 with E-number for Euro 4 & Euro 5 models. ATTENTION! For the T100 Euro 4 models, the system has no approval! This exhaust is supplied complete with new manifolds, which are then also connected to the original KAT box.
The Zard Short as well as the Slim 2-2 rear silencers have a nice muffled and rich sound. The DB-Eaters are demountable. All mounting hardware is included. The EC-approved rear silencers have an engraved E-number and do not have to be entered in the vehicle documents. This results in a weight saving of approx. 5 kg.
In order to be able to remove the DB-killer on the exhaust system, a difficult to access welding spot must be drilled out and milled away. The removal takes a total of about 1/2 hour of work.If you want to have this done, you have to order the additional article DB-killer removal Zard exhaust CB11514 (see accessories in this description).
The exhaust is available for the Euro 4 model in two versions: In the Short it is the shorter variant and in the Slim the slightly longer. If you order the Slim variant, you can convert the exhaust to the Short variant at any time.For the Euro 5 models there is only the slightly longer Slim version.
There are special racing DB-killers developed by us for the exhaust for more sound than stock and also more power (because the original DB-killer is quite too). For a sound as you want it. See accessories in this item description.
For Swiss customers, the exhausts can be delivered with declaration of suitability.
Zard Exhaust Scrambler 1200
CB11746M
/ RS0
From
€980.00*
Zard 2-2 slip-on stainless steel exhaust for Triumph Scrambler 1200 XC & XE with E-number (for both the EU 4 and EU 5 models).
The two rear silencers are positioned very close together in order to achieve the slimmest possible line. The large openings created by the slash cut on the end caps make the rear of the bike look even beefier and emphasize the off-road look of the Scrambler.The heat protection plate from the original exhaust system is retained. The accessory heat protection plate, which you can see in two product photos, can be found under the accessory items in this description.
The exhaust also delivers slightly more power than the standard system (see pictures for power curve).
The sound of the Scrambler is already audibly better and throatier with the exhaust, but in our ears it doesn't have the desired AHA effect that you would hope for. Sound video with original DB killers see below.We recommend people who like it a bit throatier and louder to order our additional Zard Racing DB-Killer (see accessories article in this description without road approval).In order to be able to remove the original DB-Killer from the exhaust system, a welding point that is difficult to access must be drilled out and milled away (takes a little more than half an hour). If you want to have this done, you must order the additional item DB-Killer removal Zard exhaust CB11514 (see accessories in this description).If the sound is still not enough for you, you will then have to install the H-pipe (cat replacement pipe).
The exhaust system is available either with E-number or as a racing version (without E-number). The end caps are also available in stainless steel (same design as the rest of the exhaust) or carbon fiber (surcharge).
ACHTUNG bei den Scrambler 2024 Modellen. Bei diesen Modellen passt die Auspuffanlage NICHT!
For Swiss customers, the exhausts can be supplied with a declaration of suitability.
IXIL IRONHEAD Thruxton 1200
CB11149M
/ RS3
€566.95*
IXIL Ironhead stainless steel exhaust for Thruxton 1200 & SpeedTwin 1200. The exhaust has an E-number and is therefore street legal for all Euro 4 models.Attention! The approval only applies to Euro 4 models - the exhaust is NOT homologated for Euro 5 models (but the E number is still on the silencer, so nobody will probably ever notice).
A really nice short muffler that provides a really sporty line. The exhaust provides in addition to the sporty short optics also for the suitably pithy sound, which must have a 2-cylinder. Really nice muffled & bassy.
There are special racing DB killer developed by us for the exhaust for more sound than series and also more power (because the original DB killer is quite too). For a sound as you want it and still have a DB killer installed, making it look completely legal. See accessories in this item description.The original DB-killers are also attached with a spot weld at the factory. To be able to remove the DB-Killer, this spot weld must be milled away (then you can fix it einrach with a screw and quite simple one & remove). If you do not want to do this work yourself, you can also let us do it. See accessories in this description "DB Killer removal".
At the customer's request, we can also have the exhaust coated black for an additional charge.
IXIL StreetTwin
CB11151
/ RS600
€566.95*
IXIL stainless steel slip-on exhaust for Street Twin. With E-number & removable DB-killer.
Euro 5 models from 2021: The exhaust also fits these models. However, it is NOT homologated for the Euro5 models (i.e. the model is behind the E-number that is on the exhaust is not deposited with).
A really nice short muffler that provides a really sporty line. The exhaust provides in addition to the sporty short optics also for the suitably pithy sound, which must have a 2-cylinder. Really nice muffled & bassy.
There are special racing DB killer developed by us for the exhaust for more sound than series and also more power (because the original DB killer is quite too). For a sound as you want it and still have a DB killer installed, making it look completely legal. See accessories in this item description.The original DB-killers are also attached with a spot weld at the factory. To be able to remove the DB-killer, this spot weld must be milled away (then you can fix it einrach with a screw and quite simple one & remove). If you don't want to do this work yourself, we can do it for you. See for it accessory article in this description "DB Killer removal".
Who wants to have the exhaust system coated in black ceramic, which can be done by us. For this, order the accessory article (in this description) exhaust ceramic coating in addition. After that, the mufflers are completely black (the IXIL logo is then also no longer visible).
Zard Short - Bobber / SpeedM
CB11362M
/ RS0
From
€1,006.00*
Zard stainless steel exhaust for Triumph Bonneville Bobber & Speedmaster. Due to its short design, the exhaust gives the Bobber a very different and cool look, because the whole rear wheel is free.
With E-number for Euro 4 & Euro 5 models.Note for the Speedmaster 1200: The exhaust system also fits the Speedmaster, but is not homologated for it.
Nice muffled sound, convince yourself (see video at the end of the description). If the sound is not enough, you can remove or modify the removable DB-killer. In addition, there is still the possibility to install X-pipes cat replacement). So that one comes to a sound, as one wishes him from a Bobber.To be able to remove the DB-killer on the exhaust system, a hard to reach welding spot has to be drilled out and milled away.If you want to have this done, you have to order the additional article DB-killer removal Zard exhaust CB11514 in addition (see accessories in this description).
Completely made of stainless steel with or without ABE. Fits so to the original manifold.
There are special racing DB killer developed by us for the exhaust for more sound than series and also more power (because the original DB killer is quite to). For a sound as you want it. See accessories in this item description.
For Swiss customers the exhausts can be delivered with declaration of suitability.
Zard racing DB-Killer
CB11523
/ RS1
€64.90*
Raisch racing DB Killer for Zard short exhaust systems. More sound + more performance through more throughput. Approx. 40% larger hole. With our DB Killer there are now 3 sound variants available for the Zard systems. With original DB Killer, with Raisch DB Killer or without. Our DB killers are without ABE. They are supplied in pairs.To be honest, with the original DB-killers you only get a very small sound compared to the standard version. Since most of them do not want to drive without DB-killers, we have made this more open variant. It looks like you have a legal DB-killer in it, but it sounds really good! With these db-killers the Zard systems get the sound they need.