Installation Öhlins FKS fork cartridge

Product information "Installation Öhlins FKS fork cartridge"

If you want to have an Öhlins fork cartridge installed in our workshop (Öhlins Service Center) you have to order this article here.
The price is for the installation of the cartridge with delivered fork. Seal rings and dust caps will not be changed. For higher mileage / signs of age we offer these parts & the assembly separately (see accessories in this description).If you want to do this all-inclusive, because you want to do something good for your fork or you are sure that the parts have to be done, you can order the additional article "fork disassembly / cleaning" and the set of oil seals (see accessories in this description). If this should not be done, we will of course assess the fork on site and contact you if the parts should be done.

Models BMW R nineT:
  • R nineT /5 EU 4
  • R nineT Classic EU 3
  • R nineT Classic EU 4
  • R nineT Pure EU 4
  • R nineT Racer EU 4
  • R nineT Scrambler EU 4
  • R nineT Scrambler EU 4.
  • R nineT Urban GS EU 4
Models Triumph AC until 2015:
  • Bonneville SE Gussrad
  • Bonneville T100 EFI
  • Bonneville T100 Vergaser
  • Scrambler EFI
  • Scrambler Vergaser
  • Speedmaster / America
  • Thruxton 900 EFI
  • Thruxton Vergaser
Triumph LC models from 2016:
  • Bobber
  • Bobber Black
  • Bonneville T100
  • Bonneville T120
  • Scrambler 1200 XC
  • Scrambler 1200 XE
  • Speed Twin - 1200
  • Speedmaster
  • Street Cup
  • Street Scrambler
  • Street Twin
  • Thruxton 1200
  • Thruxton 1200 R
  • Thruxton 1200 RS
BMW R nineT
R nineT /5 EU 4
R nineT Classic EU 3
R nineT Classic EU 4
R nineT Classic EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Öhlins Fork Cartridge Bobber CB11602M / RS600
22mm fork cartridge from Öhlins for the Triumph Bobber.We completely convert your fork to a valve controlled system with Öhlins fork springs. This turns the simple standard fork, which works according to the old two-pipe system, into an ultra-modern fork with a fully adjustable cartridge system. The rebound, compression and spring preload are fully adjustable. This rebound and compression stage is responsible for the spring out and compression speed. Thus the fork can really be adjusted to all conditions from soft to sporty tight only by a few revolutions at the adjusters, and results in such a completely new driving feeling. The adjustment range of the rebound and compression stage can really be described as large and effective, which is not really the case with all forks on the market. Assembly instructions are included in the kit. But you should have some knowledge about chassis technology!We are happy to carry out the conversion at our own Öhlins Service Center. Please order the additional article "Einabu Öhlins FKS fork cartridge" (see accessories in this description).Since the chassis of the Bobber is very many riders simply too hard and uncomfortable, this cartridge in connection with a nine and better strut is exactly the right way to make his Bobber more comfortable.Please note that the delivery does not include fork oil or fork springs, both have to be ordered separately (see accessories in this description).Without TÜV certificate. However, it will be delivered with a declaration of suitability, with which it can be registered without any problems. Since the fork springs are available in different spring rates in order to be able to adjust the cartridge to the respective rider weight, please state the rider weight (with motorcycle clothing) in the commentary of the order.

€771.00*
Fork disassembly / cleaning CB12012 / RS0
If a fork is particularly worn, it is recommended to disassemble it completely, clean it and install new oil seals + dust caps (see accessories).

€40.00*
Öhlins Fork Cartridge BMW R9T CB11068M / RS8
Öhlins cartridge for BMW R9T Scrambler & GS and for R9T Racer & Pure for the original fork. Fully adjustable: spring preload, rebound and compression. Thus, the front suspension becomes as it should be. We have the right spring rate ready for every weight class. This is the right way to turn the inadequate stock fork into a top fork for all demands. Check out the video comparing an original fork to a converted one. The video says it all. (left original/ right with Öhlins cartridge). Without fork springs (we have suitable springs for each weight class in stock, see accessories). Öhlins fork oil is also additionally (see accessories). Installation instructions are included with the kit. However, there should be specialist knowledge of suspension technology!We are happy to carry out the conversion in our own Öhlins Service Center. Please order the additional article "Einabu Öhlins FKS fork cartridge" (see accessories in this description). The fork cartridge is delivered with an ABE (general operating permit). This means that it can be easily installed and does NOT have to be registered with the TÜV.  

From €769.00*
Fork oil seals + dust cap R9T CB11832.1M / RS601
Original BMW fork Simmering + Staubzuschzkappe for all BMW R nineT models. The Simmerrings should be made new at each fork revision. The set consists of 2x fork oil seal - 2x dust cap.

From €69.95*
Öhlins 30mm Cartridge for R9T Classic CB10615M / RS7
Cartouche Öhlins 30 mm pour la fourche d'origine de la R nineT. Entièrement réglable : précontrainte du ressort, détente et compression. Ainsi, le châssis avant est comme il se doit. Nous avons la bonne tension de ressort pour chaque catégorie de poids. Gain de poids : près d'un kilo.Une réponse nettement meilleure et plus fine. Ainsi, plus de feedback et de performance, mais aussi plus de confort !Un must pour tous ceux qui attachent de l'importance à une suspension qui fonctionne vraiment bien. Le kit est accompagné d'instructions de montage. Il faut toutefois avoir des connaissances spécialisées en technique de suspension !Nous effectuons volontiers la transformation dans notre propre centre de service Öhlins. Pour cela, veuillez commander l'article supplémentaire "Einabu Öhlins FKS Gabelcartridge" (voir l'article accessoire dans cette description). Les ressorts de fourche Öhlins sont également nécessaires (voir accessoires dans cette description). L'huile de fourche Öhlins est également nécessaire (voir les accessoires dans cette description). Les têtes de fourche de la cartouche Öhlins sont désormais noires (les photos avec les têtes argentées sont d'anciennes photos). La cartouche de fourche est livrée avec une ABE (autorisation générale d'exploitation). Cela signifie qu'elle peut être installée facilement et qu'elle ne doit PAS être enregistrée auprès du TÜV.

From €1,009.00*