Surcharge fender black
€35.00*
Available, delivery time: 1-3 days
Zubehörartikel
from €224.95*
from €134.95*
from €224.95*
from €698.00*
| Product number: | CB11297 |
| item number: | 211257495 |
Product information "Surcharge fender black"
The fender is then powder-coated black by us.
Attention: You may not expect the surface quality of a painted mudguard from a powder coating. The surface looks nice but is not as perfect as a lacquer finish (therefore only costs a fraction).
If you want to have a perfect paint structure, you have to completely prime your fender, sand it and then have it painted. In this case, however, we would still recommend that the mudguard be powdered beforehand, as this serves as a perfect rust protection.
| Triumph LC models from 2016: |
|
|---|
| Triumph LC ab 2016 |
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
|
|---|
0
0
0
0
There aren't any asked questions yet.
Zubehörartikel
Raisch Alu Rear Fender Kit
CB11296M
/ RS0
From
€224.95*
The aluminium rear fender kit gives every Bonneville (T100 & T120) and all Street models (StreetTwin, StreetCup & StreetScrambler) the right old-school look.
Since almost no one likes the huge original traffic light system (tail light & turn signals), but many don't want to do without a nice, classic wing, there is the Raisch Rear Fender Kit. The wing is made of solid, high-quality aluminium and is plug & play with brackets to screw on. You only have to drill holes for the rear light and the number plate holder (there is also a version with 3 holes for the Eldorado rear light / version: black pre-drilled for Eldorado).The shape of the mudguard is much nicer and also a good deal shorter than the original one.
Indicator holder: There are 4 different options to choose from. The version with the turn signals on the inside of the suspension strut is not legal (but looks the best in our opinion).You can order a set of indicator holders directly below the description.
Number plate holder: Here again you have a choice of 4 versions. Central number plate holder: 1. "Number plate holder - Eldorado rear light" the number plate sits on the rear light above the mudguard / 2. "Number plate holder universal" the holder is attached below the mudguard to the screws for the rear light.Side number plate holder: The rear kit can also be combined with a side number plate holder, which makes for a very clean and beautiful look in the rear area. Here we have one that goes on the swingarm and one that goes on the rear shock. Both are not approved.
Turn signals: You can also order beautiful accessory turn signals below the description.
Rear light: We have tested several rear lights and the Eldorado is best for the mudguard! This is also a very high quality aluminium tail light with LED technology.
Other accessories:
Cable set: This is definitely needed if you don't want to cut anything off the original cable harness. Licence plate screw set: If you want to fix your licence plate with suitably coloured screws, you can order a set as well.Reflector: If you want to have a 100% legal rear end, you have to mount a reflector.
Alu Mudguard Thruxton / Speed Twin
CB11530M
/ RS5
From
€134.95*
This aluminum front fender replaces the simple plastic fender on the Thruxton 1200 & Speed Twin (plug & play replacement). The surface of the mudguard is beautifully polished, which looks really good on any cafe racer.
The Speed Twin already has an aluminum mudguard fitted ex works. However, this one still looks good, as it is narrower and therefore more of the tire is visible. This makes the tire look sportier.
The fender is optionally available in polished or black (silk matt) powder-coated. Also ideal for painting (see photos of the blue Thruxton). It is best to talk to your trusted painter beforehand to find out whether he would like the fender in polished aluminum or better coated in black (as the coating is a bit like a primer).On request, we can add a piece of sanding fleece free of charge so that you can brush the polished mudguard to a matt finish by hand (see photo).
Heavy Duty Rear Fender LC
CB11293M
/ RS3
From
€224.95*
This Alu Rear Fender for Bonneville and Street models.
The Fender is made of thick, high-quality aluminum and can be screwed on to Bonneville T100 + T120 and all street models. It replaces the chunky and long original fender.
Turn signal holders, license plate, taillights and turn signals must be ordered seperatly. Or order her the Raisch Alu Fender Kit.
The mudguard can also be ordered in black coated. For this, please order under accessories the supplemental license extra black mudguard (extra charge: 30 €)
Short Rear Fender Kit Bobber
CB11411M
/ RS0
From
€698.00*
A short fender for the Bobber, which replaces the original, quite long, as well as the huge traffic lights can be omitted. The fender is unpainted, can be painted as desired or simply installed as is, the metal look fits very well to the Bobber (but must then be painted with clear lacquer and powder coated mandatory, otherwise the steel will rust). A matching front fender in the same design is also available (see accessories in this description).
The kit was developed as customer-friendly as possible, i.e. all original brackets were taken over, so that the kit can be mounted plug&play without much tinkering. Included are the two milled support braces with integrated tail light / turn signal combination (with E-number). The cables of the turn signals run inside the struts, so that they can be routed as invisible as possible.
We recommend to the kit the side license plate holder from our range (see accessories in this description).
For easier installation / wiring, we recommend the matching Raisch cable set to order. You can find it under the accessories in this description.Attention on models from model year 2023: According to the installation instructions from Wunderkind, a blocking diode must be installed in the rear lights on these models (included in the scope of delivery). If you order our cable set in addition, you can save yourself this work, as a diode is already installed in the cable set.
The fender is available in 3 variants.
Variant 1: Raw untreated steel
Variant 2: Black satin powder coated (similar surface as most motorcycle frames)
Variant 3: Black high gloss powder coated. This coating comes, by the extremely high-quality powder is used, a black glossy paint really very close (see photos)! However, you should not expect a 110% perfect surface as from a painter who primed and sanded the fender beforehand.
Since the fender is handmade stainless steel, it has texture and slight imperfections (which you can easily see even after powdercoating). If you want it perfect or in a different color, you will need to have the fender primed and then painted. However, we would then still recommend to have the fender powder-coated in advance, as this serves as a perfect rust protection (but then variant 2 black matt is sufficient).