Skyrich lithium-ion power battery with extra power. For the weight fetishists among motorcyclists.The power battery has more vapor than the original battery and starts your bike more reliably. Even if the cylinder is in a bad position (e.g. TDC) and the normal battery would not be able to turn the engine, the Power battery will not let you down. The battery also has more capacity. ATTENTION: Due to shipping regulations, we are only allowed to deliver batteries to certain countries (see list of countries at the end of the description). We do not ship batteries to all other countries. The battery weighs just approx. 1.5 kg. This saves between 2 - 4 kg depending on the battery installed. There is no easier way to save weight on your machine. Attention for air-cooled Triumph AC models built 2008-2009: These models have a different battery box and need a different battery (you can find these in the accessories articles in this description). You can recognize this by the fact that your battery has the designation YT12BS (WITHOUT X). 12 V maintenance-free lithium-ion battery, capacity 6 Ah, energy 72 Wh, dimensions in mm 150 x 87 x 105 Charging current recommended 2 amps, maximum charging current for fast charging 20 amps.Very cost-intensive, but LIGHT! We only supply the very latest technology.The battery is supplied pre-charged. With charge status indicator (simply press the button on top of the battery and the integrated LEDs will show you the current charge status).Another major advantage of lithium batteries is their extremely low self-discharge rate (maximum 5% per month). Our experience has shown that it is even lower. We recommend ordering our charger if you do not already have one that is lithium-ion capable. Countries we ship to: GermanyBelgiumDenmarkIrelandFrance, GermanyLuxembourgNetherlandsNorwayAustriaPolandPortugalRomaniaSwitzerlandSwedenSloveniaSlovakiaSpainHungary   Specific information on the lithium-ion battery:   Lithium-ion battery with overvoltage protection from Skyrich Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati. The Power Sports lithium-ion batteries in the LTM line are characterized by a heat-resistant, waterproof nylon housing and improved terminal connections Overcharge Protection (OP) The Skyrich battery has an extended battery management system (BMS) which, in addition to the balancers (ensures even charging/discharging of the battery), also includes overvoltage protection. This prevents the battery from being charged with a voltage of over 14.9V. Spacer (S) The battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip so that the battery fits exactly into the battery box. Waterproof (WP) The battery is completely waterproof and will not be damaged if the motorcycle is cleaned under high pressure. Indicator (I) All batteries are equipped with an improved state of charge indicator, which shows the battery's state of charge even more precisely. Replacing a standard lead-acid battery with a Skyrich lithium-ion battery can save up to 5 kg in weight without significant effort. The following advantages speak for Skyrich lithium-ion batteries: - Integrated overvoltage protection- approx. 1/3 of the weight of the comparable lead-acid battery- improved pole connections made of brass for best conductivity- waterproof- Completely black battery housing- battery housing made of nylon, therefore deformation due to heat is practically impossible- unbeatable cost/weight saving ratio- can be installed in any position as it contains no acid- Contains no heavy metals- Balanced discharge/charge of all cells through balancer- Fast charging with high charging current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- good performance even at high temperatures up to 60°C

Batterieüberbrückungskabel in dünner Ausführung. Diese Kabel sind mehr als ausreichend, um ein Fahrzeug, insbesondere ein Motorrad, zu überbrücken.Die dünnen Kabel mit den kleinen Klemmen sind wesentlich praktischer als die dicken, unhandlichen Kabel, die man kaum an die Batterieklemmen bekommt, wie man sie von Autos kennt. Länge: 1,6 m  

This high-quality, completely black carpet from Triumph serves as a workshop carpet or simply as a base to make your beloved Triumph a little more comfortable. Of course, it also looks very nice if your bike has a nice place to stand and it stands on a black Triumph carpet. The carpet has an all-round rubber lip that protects the carpet from damage and fraying.

A set of stylish leather cable ties. These cool leather straps are the stylish alternative to the original rubber / plastic clamps or cable ties that are mostly used on motorcycles.Who does not know it, the annoying lines & cables on the motorcycle, which actually no one wants to have but unfortunately are mandatory. Then these must also be attached to the handlebars or the frame of the motorcycle, for example, and this is usually unsightly with plastic holders.With the leather cable ties, the problem is now done! Because the straps are not only practical as a cable tie, but they are your bike also skillfully on. The devil is in the details. The leather straps have a strong adhesive 3M tape on the back, with which you can attach any cable / line perfectly and securely. A set consists of 4 straps.

Timing belt drive kit for the air cooled Triumph Modern Classic models. The timing belt drive is primarily to reduce the loss of power from the transmission output to the rear wheel. It also makes the usual chain maintenance a thing of the past. No more chain tensioning, no more chain lubrication, and most importantly, no more chain grease/dirt removal from the bike. The gear ratio of your motorcycle remains the same after the conversion. Attention: The kit is not a very easy to install plug & play kit. Please have a look at the assembly instructions before buying (you can find them under downloads in the product description).The original chain guard and the sprocket cover can not be used. A matching belt guard and sprocket cover, you will find under the accessories in this description. Model specific descriptions: Bonneville - pulley: 65 teeth / sprocket: 27 teeth / belt: 130 teeth Thruxton / Scrambler - Pulley: 65 teeth / Pinion: 27 teeth / Belt: 132 teeth Speedmaster / America - pulley: 65 teeth / sprocket: 27 teeth / belt: 140 teeth   Classicbike-Raisch tip: We recommend ordering the matching adjuster for perfect belt tension adjustment (see accessories in this product description)

In the Tour Package are five very practical things included, which we recommend as experienced tour riders to take on every motorcycle tour. In addition, we recommend an additional tool kit to pack on each tour. Tool sets from us can be found under the accessories in this description. In the set are the following things included: 1x Raisch microfiber cleaning cloth: useful for minor repairs on the road times what to wipe clean on the bike. 1x Motul Hands Clean Paste: A magical cream that you simply smear into the dirty / oily hands and rub neatly. Like an eraser, the passe rubs away any dirt. 300 ml Motul tire puncture spray: A flat tire on a motorcycle tour is simply a disaster, you can not even go to the nearest tire dealer. With the puncture spray you do not happen!  1x Motul Chain Paste: The practical chain lubricator for on the road. 1x Bowden cable repair kit: Everyone has had it or heard of it. A torn gas or clutch cable. So every tour is finished on the spot. With the repair kit you can repair your train. In the set at a special price!

Fabric tape adhesive, which is perfect to wrap several cables together neatly and chic. WIe, for example, a wiring harness. Perfectly suited if you rewired anything on the bike and would like to have the cables neatly together in one strand.

The practical lock for day trips into the city.Who doesn't know the feeling of cruising into town or to the park on a motorbike for a stroll? Where to put the helmet and the bag?! This practical 1.80m long ring lock allows you to attach your bag or helmet to the motorbike frame and protect it from easy theft.

Rubber bellows for the clutch cable of all air-cooled AC models. The rubber is left extra a piece longer so that you can cut it to length as needed. Depending on whether and what a AUsrückhebel is installed.

Triumph has designed the air-cooled parallel twin engine to be extremely robust and virtually indestructible. However, there is one weak point that has already caused engine housing damage at one time or another, namely the bearing point of the electric starter intermediate gear on the housing side. For this reason the Safe-Start was developed. It is a quick and easy method to strengthen the bearing point massively, thus eliminating the risk of engine damage caused by a kickback of the starter mechanism. The Safe-Start is a precision CNC milled part which is placed over the bearing. The Safe-Start is glued over the bearing with a 2-component special metal glue. A detailed assembly instruction and also the glue is enclosed. The Safe-Start nestles itself positively around the bearing and distributes the forces in case of a kickback in such a way that no damage can occur. This problem only becomes apparent when it is too late... Of course we don't want to spread panic, because most engines have no problem so far. Nevertheless, we already had a few cases of this in the workshop and also in various forums worldwide some cases are known. This then means a very expensive repair, because the motor housing has to be replaced in this case. So with this part you can prevent expensive damage! To mount the bike, the oil has to be drained, the clutch cover has to be removed, the bike has to be leaned against a wall on the right side. Degrease and glue everything. Additionally you need a clutch cover gasket, which is included in delivery.

Mit dieser Motorradabdeckung mit Triumph-Logo schützen Sie Ihr Bike vor der Witterung. Robuste Außenkonstruktion mit extern verklebten Nähten, reflektierenden Details, einem hitzebeständigen Futter, verstellbarem Bauchgurt und Rundum-Spritzschutz.

The Rizoma DBL system is a safety device that activates a flashing brake light to warn vehicles behind an intense and sudden braking. The device is activated when properly mounted on the motorcycle when the vehicle makes a sudden deceleration / emergency stop by flashing the brake light at a frequency of 4 Hz (flickering light as known from cars during an emergency stop). The system only works at speeds of 40 km/h and above. The DBL-Box can easily be connected to the rear light of the motorcycle or to a combination indicator.The sensor is an acceleration sensor and therefore does not need a connection to the brake hydraulics.

Wall holder made of Hold, with leather holder for your helmet!You simply plug this holder to the wall (mounting material is included) to hang your stylish helmet on the helmet holder and hang your jacket as well as your bike key on the tool keys.Finally, beautiful bike clothing gets a worthy place and is no longer simply hung in a closed cupboard or shelf where no one can see it anymore.With this holder you can hang up your motorcycle clothes, best directly on your motorcycle in your men's world, the garage. I would say that this is the most stylish way to hang your clothes neatly away!

Magura Visor Cleaning Set. Included in the set is a sponge for cleaning and a cloth to dry off.Sounds very simple but it is not. We had the sponge with us on our last motorcycle holiday (we got it from Magura as a promotional gift) and thought a towel would do us just as good. But this is absolutely not true, we were thrilled how well the flies and other dirt, with the sponge from the Visir and the rest of the helmet away. With it no soaking, visor cleaner or anything else is more necessary.

No more scruffy chain ball nuts. The black nuts are outside made of aluminium and have a stainless steel thread core, the silver nuts are completely made of stainless steel.They can be simply pressed against the original steel nuts, which are not particularly beautiful from the surface.Fits in black especially well to the chainrings we sell, because they are always black.

These screws are powder coated in the matching colors (white / blue / black) for the license plate. We have our stainless steel screws powdered in Germany. This allows us to guarantee a high quality. The tool still fits, even the color does not burst. Delivery: 1x screw M5x20 blue 2x screw M5x20 black 3x screw M5x20 white 4x self-locking nut M5 4x washer M5 DIN9021 The advantages of powder-coated screws: - Mechanically resilient - Corrosion resistant - Weather resistant - Environmentally friendly

This module is simply clamped between harness and headlight bulb. The assembly takes about 5 minutes. The purpose of the module is that when the ignition is switched on, but the engine is not running yet, the headlight will be off to conserve the battery. Anyway, if you want to have the light on while the engine is not running, you just have to turn on the high beam switch and turn it off (that's exactly how you turn the light on when the engine is started). This module can be decisive whether the motorcycle starts again or not (especially with the EFI models, since they do not start anymore at a voltage drop of 0.1 Volt). And what could be worse than not coming home on a tour because of a low battery? The light bulb is not affected.

Black helmet holder which is mounted behind the strut. The helmet holder is hardly noticeable because it is mounted directly on the shock absorber. High quality qualtaet. The holder is easily installed behind the spring strut within 2-3 minutes and comes with 2 keys. Fits only with the original strut.

Stealth sprocket. The Stealth sprockets are the most advanced and technically advanced sprockets in the world. The secret is based on the combination of the durability of steel and the lightness of duralumin. Duralumin is predominantly used in aviation and has a slightly greater density compared to pure aluminum. The tensile strength is about 11 times that of pure aluminum. Due to curing, duraluminum almost reaches the strength of steel. Accordingly, a lower weight and a higher resistance have been adopted. The middle parts are manufactured with high precision on CNC-mills and are coated with a thick anodic film which prevents oxidation. Eloxal is (ELelectrolytic oxidation of aluminum). The surface of the aluminum workpiece is converted into an oxide layer in an electrochemical process. This layer is definable in its thickness and makes the products treated in this way wear-resistant and corrosion-resistant. According to experience, the stealth chain wheels last approximately three times longer than pure aluminum chain wheels. The steel sprockets for our Twins are 20% heavier than the Steath chainrings. Add to that the really unique look. Attention ! Please be careful to look at a chain link if you have a 520 or 525 chain.

Oil drain plug with an intrigued magnet on which the metal chips of the motor settles. Then, during the oil change, more chips are taken out of the engine.

For all Triumph Twin models incl. Regulator / horn conversion kit. Thus, the ongoing anger with the original triumphs is permanently and permanently switched off. 12V 580W Latest generation. Plug & Play solution with cables and plugs for connection to the generator output and battery as well as a control horn installation kit with screws.

Rear chainring 45 teeth. Shorter translation. Very good for the thruxton instead of the original 43iger. Brings more pressure from the bottom. In the 5th gear also the red area is striped, that means, instead of the hitherto very tedious 200 KM / h, it is now easier to even 210 KM / h. Do not worry about speed. There is a limiter that intervenes in time. Naturally also suitable for Bonnie + Scrambler. More acceleration more topspeed. Attention ! Please be careful to look at a chain link if you have a 520 or 525 chain.

Accessories Main stand. Made in England. Like the original but cheaper

Engine cover screws stainless steel hexagon in untreated or with black coated heads. BONNIE + THRUX + SCRAMB .. Replaces the rather simple hexagon socket head cap screws and hexagon socket screws are simply higher quality and look better .. For the two large engine covers left and right and for the cover of the sprocket cover. A total of 33 M6 screws from 30 mm to 75 mm. Simply replace it with the original and tighten to 9 Nm or hand-tight. Gammel due to weather conditions is excluded in these screws. To the black screws: All included screws are A2-70 stainless steel and have been powder coated in a nice black matte. Optically great, if the screws should not attract attention. No chipping off the paint! The screws are neatly packed in bags for the respective engine cover. The exchange is thus very easy. It is exchanged one screw after the other. As a result, no new seals are needed. The screwkit includes the screws for: - Clutch cover - Engine cover right - sprocket cover - Lid switching mechanism

Side cover screw with which one can remove the side cover disassembly without tools, which under certain circumstances can be very practical.For example, if a safety device is broken and it needs to be tapped.In addition, the aluminum screws also still look chic.

That's what everyone needs, because there was no reasonable tool to the motorcycle until now. Fits perfectly under the SItzbank e.g. in the air-cooled and some water-cooled models.The extremely compact high-quality tool set specially adapted to our ladies with which almost all work can be done on the road. It is exclusively the highest quality craftsman - top tool from among other things vanadium tempered steel 31 CrV 3 W, that WERA and other renowned companies under the Forum label through the German wholesaler for quality tools are produced. Lasts a lifetime and is also suitable for home in the garage.With the roller fork wrench can be loosened even the largest screw on the motorcycle:front wheel axle 24 mm. At the same time, the roller fork wrench also serves as a tightening tool for the outer hexagon of the bit holder to tighten or loosen screws firmly and safely.... Contents: Wera bit hand holder, connecting part with magnet for bits, connecting part for nut, bit for Torx T25, T27, T30 - bit for slotted screw 4.5 mm + 6.5 mm - bit for cross slot PH 1, PH 2, PH 3 socket wrench (nut) 1/4 " for: 6, 8, 10, 12, 13 and 14 mm - Bit for hexagon socket 4, 5, 6, 8 mm Roller wrench up to 25 mm - Wrapping and underlay cloth 25x25 cm. Pliers were deliberately omitted, because they are rarely used, and you can also use his multitool or Leatherman. We recommend you to order the tool bag from our assortment in addition (see ZUbehörartikel in this description). In this one can accommodate the tool set perfectly.

Front chain sprocket. For those who want to translate their motorbike somewhat shorter (very recommendable) for the is a 17 pinion just the right. For the drivers the performance and acceleration is not so important, but rather a relaxed drive at low engine speed for which we also have a 19 pinion in the program.

Please choose a rear chainring in different sizes in the selection. The 45 chainring is highly recommended as a shorter gear ratio compared to the original 43! Brings out more pressure from below. In the 5th gear the red area is also touched in this way, which means that instead of the previously very tedious 200 KM/h, it is now easier to go up to even 210 KM/h. Don't worry about revs. There is a limiter which intervenes in time. Of course also suitable for Bonnie + Scrambler. More acceleration more top speed.Chainring 47 teeth. For mega pressure from below .  Attention Chain needs two links moreLook out! As a precaution, please look at a chain link to see if it is a 520 or 525 chain.

Workshop manual. All types. NEW version in the ring folder. In German language. For english Language or other languages please contact us.

Replacement fuse 4 pieces. 5-10-15-30 A. For all models. You should always have that, because in the fuse box only 10 + 15 A as replacement fuses are present. Mostly there are in the trade only as a 10 set and there are 7.5 A and 20 A fuses, which are not needed.

NGK spark plug connectors for all air-cooled Triumph models. Since standard not particularly beautiful, dark red plugs are installed (which are very eye-catching), we offer here beautiful black, which are less noticeable. The price is for a single plug. The exchange of the plugs is quite simple and done in a few minutes.

Synchronous tester for 2 cylinder engines. Quality gauge for the carburettor.

Classic horn completely chromed. Replace the very unsightly original horn.

Regulator / regulator. Cheap replacement for the originals. Essentially cheaper than an original spare part. Plug & Play solution right with the right plugs. Our high-quality MOSFETREGLER can be found further down on the page.

Alternator / stator for all 2 cylinder models. Replacement for the originals. Best quality and much cheaper than an original spare part. Plug & Play solution right with the right plugs Fits only for the carburetor models.

Lithium-ion battery. For the weight fetishists among motorcyclists. ATTENTION! We are only allowed to ship batteries to certain countries due to shipping regulations (see country list at the end of the description). We do not ship batteries to all other countries. The battery weighs just 1 kg. That saves between 2 and 4 kg, depending on the battery installed. There is no easier way to save weight on your machine. Attention for air-cooled Triumph AC models built 2008-2009: These models have a different battery box and need a different battery (you can find these in the accessories articles in this description). You can recognise this by the fact that your battery has the designation YT12BS (WITHOUT X). 12 V maintenance-free lithium-ion battery, capacity 3.8 A , energy 45.6 Wh, dimensions in mm 150 x 87 x 90 charging current recommended 4.5 amps, maximum charging current for quick charging 35 amps.Very costly, but EASY! We only supply the very latest technology.The battery is delivered pre-charged. With charge level indicator (just press the button on top of the battery and the integrated LEDs will show you the current charge level).Another big advantage of lithium batteries is their extremely low self-discharge (maximum 5% per month). Our experience has shown that it is even lower. We recommend that you order our charger if you do not already have one that is lithium-ion compatible.   The following advantages speak for JMT Lithium-Ion batteries: - approx. 1/3 of the weight of the comparable lead-acid battery- Brass terminals for best conductivity- waterproof- Completely black battery housing- Battery housing made of nylon, so deformation due to heat is practically impossible- unbeatable cost/weight ratio- can be installed in any position as it contains no acid- contains no heavy metals- balanced discharge/charge of all cells through balancer- fast charging with high charging current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- good performance even at high temperatures up to 60°C- safe technology and long service life   Germany Belgium Denmark Ireland France Luxembourg Netherlands Norway Austria Poland Portugal Romania Switzerland Sweden Slovenia Slovakia Spain Hungary

Dual sprockets are the highest quality and most technically advanced sprockets in the world. The secret is based on the combination of the durability of steel and the lightness of aluminum. The outer rim of the sprocket is made of steel (to ensure a long service life) and the inner rim is made of aluminum (to save weight).The middle parts are manufactured with high precision on CNC milling machines and are coated with a thick anodized film that prevents oxidation. Experience has shown that the Stealth sprockets last about three times longer than pure aluminum sprockets. The steel sprockets for our Twins are at least 20% heavier than the Stealth sprockets (especially with rotating masses, every gram counts!). And then there's the unique look. Classicbike-Raisch tip 45 teeth for a shorter gear ratio: We recommend fitting a 45 tooth chainring to the rear of our beloved Twin, because it only brings advantages. The bike pulls better, you can find the right gear at a constant speed of 50-60 km/h without constant jerking & your Triumph will also be faster at top speed (the standard gear ratio is clearly too long and the bike doesn't even come close to the limiter in 5th gear).

Helmet holder. High quality chrome plated. Very good solid quality. Supplied with frame protector for mounting, mounting and 2 keys. Easy self-assembly on rear frame

Bowden cable + nipple Pannenset. Should not be missing on any tour. This can be used to repair more than one Bowden cable. At my last Alpentour could be repaired after a fall, the broken handbrake lever. Otherwise, only the towing car could have helped and the tour would have been finished. Whoever was with you knew what I was talking about.

The ideal charger for all motorcycle batteries, whether lead, liquid, lithium-ion, AGM. With us for months in the test. However, it can also be used to charge stronger car batteries. To the kit belongs with us a charge state cable which is connected to the battery. At the end there is an indicator with traffic light function: green, yellow, red, depending on the condition of the battery. This cable easily fits under the side cover and can remain there. When charging, the charging cable of the charger is simply connected to the charge state cable and the charge process begins. It does not get any more practical. No screwing, no dismantling! 5 years warranty. Made in Europe. Fully automatic charging characteristics, especially suitable for deep discharge batteries, spark-free, no voltage spikes. Yes the part is expensive but worth its price!

Spark plug nuts 18mm 3/8 connection, for all Twins, high-quality workmanship, with magnet to keep the spark plugs in the nut.

Lithium-ion battery. For the weight fetishists among motorcyclists. ATTENTION: Due to shipping regulations, we are only allowed to deliver batteries to certain countries (see list of countries at the end of the description). We do not ship batteries to all other countries. The battery weighs just approx. 0.9 kg. This saves between 2 - 4 kg depending on the battery installed. There is no easier way to save weight on your machine. 12 V maintenance-free lithium-ion battery, capacity 4 Ah, energy 48 Wh, dimensions in mm 150 x 87 x 93 Charging current recommended 2 amps, maximum charging current for fast charging 20 amps.Very cost-intensive, but LIGHT! We only supply the very latest technology.The battery is supplied pre-charged. With charge status indicator (simply press the button on top of the battery and the integrated LEDs will show you the current charge status).Another major advantage of lithium batteries is their extremely low self-discharge rate (maximum 5% per month). Our experience has shown that it is even lower. We recommend ordering our charger if you do not already have one that is lithium-ion capable. Countries we ship to: GermanyBelgiumDenmarkIrelandFrance, GermanyLuxembourgNetherlandsNorwayAustriaPolandPortugalRomaniaSwitzerlandSwedenSloveniaSlovakiaSpainHungary   Details about the Skyrich battery: Lithium-ion battery from Skyrich Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM, Ducati and Honda etc. The Power Sports lithium-ion batteries in the LTM line are characterized by a heat-resistant, waterproof nylon housing and improved, stronger terminal connections. Replacing a standard lead-acid battery with a Skyrich lithium-ion battery can save up to 5 kg in weight without significant effort. Spacer (S):Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip so that the battery fits exactly into the battery box. Waterproof IP65 (W):The battery is completely waterproof and will not be damaged if the motorcycle is cleaned under high pressure. Indicator (I)All batteries are equipped with an improved state of charge indicator, which shows the battery's state of charge even more precisely. The following advantages speak for Skyrich lithium-ion batteries:- Integrated overcharge protection- approx. 1/3 of the weight of the comparable lead-acid battery- Improved brass terminal connections for optimum conductivity- Waterproof- Black battery housing with green cover- battery housing made of nylon, therefore deformation due to heat is practically impossible- unbeatable cost/weight saving ratio- can be installed in any position as it contains no acid- contains no heavy metals- Balanced discharge/charge of all cells through balancer- Fast charging with high charging current possible- very low self-discharge (max. 5% per month)- good performance even at high temperatures up to 60°C- Safe technology and long service life Due to their specific properties, lead-acid batteries can only use 30% of their capacity, whereas lithium-ion batteries can use almost 100% of their capacity.For this reason, the lithium versions of Skyrich batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting power. With the help of adapters, the dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries.The connections are also identical, which is why the battery can be replaced in just a few minutes without any further adjustments. Please note that only suitable chargers may be used for charging. We recommend JMP chargers.Please refer to the technical data below for the maximum recommended charging currents.Under no circumstances should chargers be used that attempt to desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process.The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius. TechnologySkyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium polymer process in their manufacture. This means that they cannot burst into flames or explode during normal operation.The technology and manufacturing process ensure the highest safety standard for lithium batteries. - 12 V maintenance-free lithium-ion battery- Recommended charging current 2 A- Maximum charging current for fast charging 20 A