HKS Chain Spray Extreme

The HKS Extreme chain grease is probably the best and longest lasting chain spray that is available for motorcycles.The HKS Extreme chain grease in 500ml storage container including aufträufel bottle (for perfectly dosed and dirt-free application). Tip:- Alternatively also available as a spray. See accessories article in this description.- For a beautifully maintained and clean chain, we recommend the HKS cleaning spray (see accessories article in this description). Description: Pure synthetic lubricant with white solid lubricants NEW FORMULA.HKS extreme New Generation is the answer against wear in new scales.HKS extreme New Generation is a lubricating coating with excellent viscosity and thermophysical properties. The lubricant, which initially has a low viscosity when applied, penetrates into the smallest cavities due to the integrated capillary effect, so that optimum lubrication is always ensured, even in the chain interior, the highly stressed chain pins. After 3-5 minutes evaporation time a lubricating film similar to a plastic coating with long-term effect is formed. HKS extrem New Generation allows the chain to glide along almost wear-free, quietly and damped, even at the highest speeds, for extremely long lubrication intervals.HKS extrem creates a durable, thick, absolutely waterproof lubricating filmsimilar to a plastic coatingHKS extrem has an extreme suction effect and penetrates to the highly loaded friction points.friction pointsHKS extrem seals against dirt and waterHKS extreme is guaranteed not to be thrown offHKS extrem significantly reduces chain adjustmentHKS extrem ensures smooth running without loss of performanceHKS extreme has a noise and jerk damping effectHKS extrem no chain cleaning for relubricationHKS extreme absolutely O/X/W ring compatible2500 km chain lubrication intervals6 properties that only HKS offers!1. sealing effect: prevents penetration of dirt and water2. long-term lubricating film: 5 x longer lubrication intervals than conventional chain lubricants3. quick readiness for use: ready for use in 3-5 minutes after application, guaranteed not to be thrown off4. 5 x thicker lubricating film layer thickness: has a noise-pressure damping and wear-reducing effect5. ultra-fine dosing: enables economical and targeted consumption without environmental contamination6. optimal supply of the chain inner life: sucks to the highly loaded chain pins   Application note: The alternative to spraying HKS Aufaufufler is suitable for extremely economical, targeted and effective use without ambient fogging   Step 1:The motorcycle chain should be free of grease before the first HKS extreme application. We therefore recommend a prior application of HKS-R high performance chain and rim special cleaner so that an optimal chain cleaning is guaranteed and the lubricating film to be applied afterwards can adhere optimally.   Step 2:Jack up the machine on the main stand or free the rear wheel. Mark the initial application point on the chain wheel in the middle of the chain wrap and start applying the HKS extreme there. The chain is loose and kinked in the area of the middle of the chain loop. The HKS extrem, which is initially extremely thin, can thus reach the highly stressed chain pins and refresh the internal lubrication (provided the X/O rings, which are usually "tired" and leaking after about 3000- 5000 km)   Step 3:1. cut drift tip at an angle to create a tiny opening.2. remove the tip attachment and fill up the drizzle from the well-shaken 500 ml can. Then put the tip attachment back on.3. shake the applicator well. 4.The lubrication process should be carried out in 4 passes.Two passes each on the right and left between the inner and outer tabs.Two passes each on the right and left between the inner plate and the roller.- Do not omit any chain link!5 During the application process, continue to turn the chain until the initial application mark is reached. Process should not be repeated, evaporation time and sealing effect start immediately.6. Allow to evaporate for 3-5 minutes, then drive immediately. HKS extreme is compressed by the tensile load which occurs when accelerating, resulting in the formation of a lubricating film which acts like a plastic coating and therefore does not allow foreign bodies to adhere to it. Tip:For the formation of the coating effect - motorcycles from the Enduro range approx. 5 km on firm asphalt drive. As soon as the first 2-5 rollers become bare, relubricate as prescribed. Chain cleaning is not necessary if HKS extrem is used exclusively. The HKS extrem lubricating film has a long-term lubrication behavior for extremely loaded chains. For example, one lubrication lasts for at least 2,500 km on a 100 HP machine. When used correctly, HKS extrem is very productive and sloughing off is impossible.

2-component cleaner Consisting of cleaner spray and neutralizer spray. HKS-R creates optimum conditions for the initial application of HKS extreme. HKS-R was developed at the request of many customers so that the lubricating effect of HKS lubrication products starts immediately. To ensure optimum chain cleaning, a 2-component solution is required. Not only the external dirt must be removed before lubrication, but also the chain-destroying dirt from the chain interior, which could creep in, for example, after fatigue of the sealing rings. Only after careful cleaning with HKS-R CLEANER and application of HKS-R NEUTRALIZER can a new lubricating film penetrate, e.g. to the highly loaded chain pins. It is important that the cleaning agent is completely removed so that the lubricating film to be applied afterwards can adhere optimally. After treatment with HKS-R, the penetration of lubricants, e.g. of HKS extreme, into the chain interior to the highly loaded chain pins is absolutely ensured. Due to the sealing effect of HKS extreme, no more dirt can get into the chain inner life.   Component 1: HKS-R CLEANERHKS-R cleaner gently removes extreme dirt and grease from chain and rim in just a few minutesHKS-R cleaner cleans even between the smallest cavitiesHKS-R cleaner does not attack O-W-X ring, is acid-freeHKS-R cleaner restores the shine of the rims, also for chrome rims Component 2: HKS-R NEUTRALIZERHKS-R Neutralizer rinses off the loosened dirt and the likeHKS-R Neutralizer neutralizes the cleanerHKS-R Neutralizer causes a short-time O-W-X-ring shrinkage, so that the chain-destroying dirt can also be removed from the inside of the chain.the chain-destroying dirt is also transported out of the inner workings of the chainHKS-R Neutralizer allows the lubricant to be applied subsequently due to the short-term state ofof the O-W-X-ring shrinkage, the lubricant to be applied can also optimally reach the inner life of the chain, e.g. the highly loaded chain pins.HKS-R neutralizer ensures optimum durability of lubricants to be appliedHKS-R neutralizer does not attack O/W/X-rings, is acid-freeHKS-R Neutralizer restores the shine of the rims, also for chrome rims   Package size:1 set HKS-R consisting ofeach 300 ml spray CLEANEReach 300 ml spray NEUTRALIZER   Application chain and rim cleaning Instructions for use   HKS-R high performance chain and rim special cleaner 2-components: Cleaner Spray and Neutalizer Spray 2 spray cans á 300 ml Quick and easy handling with double effect! Step 1:Jack up the machine on the main stand or free the rear wheel. To avoid contamination of the stand surface, use newspaper or a drip pan. Step 2:Application Component 1HKS-R CLEANERCleaning and preparation for perfect chain lubrication!Start at the chain wheel in the middle of the chain wrap and spray the chain or dirty rim thoroughly with component HKS-R REINIGER and allow to act. Then wipe chain or rim with a cloth or brush. Repeat process until all foreign matter has been removed. Step 3:Application Component 2HKS-R NEUTRALIZERStart at the chain wheel in the middle of the chain wrap and spray the chain or dirty rim thoroughly with component HKS-R NEUTRALIZER and allow to act. The chain will now be absolutely clean from the outside and inside. After approx. 3-5 minutes (when the white coating has evaporated and the chain has regained its normal appearance), apply chain lubricant e.g. HKS extreme high performance chain lubricant. The sealing rings are in the state of shrinkage, so that the lubricant also reaches completely into the inner life of the chain, to the highly loaded chain pins. After another 3-5 minutes the sealing rings regain their normal condition. HKS-R creates optimal conditions for the initial application of HKS extremely high-performance chain lubricant.