The Alu Rear Fender Kit - Short Version is the second version of our proven Alu Rear Fender Kit. Absolute top quality at a fair price.The short version is significantly shorter, is slightly closer to the frame and has no fold on the sides. The kit thus looks less classic and fits especially well with scrambler & sporty conversions. Since almost no one likes the huge original traffic light system (tail light & turn signals), but many do not want to do without a fender, we came up with this kit. The fender is made of solid, high quality aluminum and is plug & play with brackets to screw on.In addition, the fender is already pre-drilled for the Eldorado taillight (you will find further down in the description to order) and also has a hole for the cable set (which you can also find below the description). Turn signal holder: Here are 4 different options to choose from. Where the variant with the turn signals inside the strut is not legal (but in our opinion looks the most beautiful).A turn signal holder set you can order below the description directly with it. License plate holder: Here you are again 4 versions to choose from. Central license plate holder: 1. "License plate holder - Eldorado taillight" the license plate sits on the taillight above the fender / 2. "License plate holder universal" the holder is attached below the fender to the screws for the taillight.Setiliche license plate holder: the rear kit can also be combined with a side license plate holder, which makes for a very clean and beautiful look in the rear area. Here we have one that goes on the swingarm and one that goes on the shock. Both are not approved. Other accessories: Cable set: This is needed in any case, if you do not want to cut anything off the original wiring harness. License plate screw set: Who wants to fix his license plate with matching colored screws, which can order a set with it. Reflector: Who wants to have a 100% legal rear, which must mount a reflector with. Raisch Alu Rear Fender Kit - Short 

The short Classicbike-Raisch aluminum mudguard for the rear is significantly shorter and slimmer than the original mudguard. The mudguard is NOT pre-drilled, so everyone can determine the length themselves to a certain extent (this allows the mudguard to be slightly shorter or longer towards the rear, depending on taste).It is therefore almost a plug & play solution.Assembly material and instructions are included. The mudguard is the perfect mudguard for any individual rear conversion. If you are looking for a complete mudguard solution, then we recommend our Raisch short mudguard kit (see accessories article in this description). The aluminum fender is available in polished, matt brushed & black powder coated.

A small, handmade GRP fender made of high quality fiberglass. Made in Spain at the Triumph forge Tamarit Motorcycles. The fender can be easily replaced with the original fender within minutes. Available in unpainted (raw) or Jet Black (gloss black). Dimensions: 36 x 15

A large & high set handmade GRP fender made from high quality fiberglass. Made in Spain at Triumph forge Tamarit Motorcycles. The fender is attached to the upper triple clamp.The large fender protects very well from splashing dirt off-road. Visually, the fender should remind you of a classic motocross fender. Visually perfect for any scrambler look conversion with knobby tires. Available in unpainted (raw) or Jet Black (gloss black). Dimensions: 60x22x18 cm  Please note, this part is a handmade fiberglass part. Such parts can never be 100% accurate and equal. That is, it may be that times a mounting hole slightly re-drilled / worked.

The right look for every scrambler! On a reasonable Off Road Scrambler conversion, you simply need a raised front wheel fender as you know it from any Cross machine.The holder is made of stainless steel to guarantee a long durability and no breaks.Fits all air cooled Triumph models. The holder is simply mounted to the original triple clamp.We recommend either the Stripe or the Short fender from our range to match the kit (see accessories in this description).

GFK mudguards suitable for the original mount fits Bonni, Scrambler & Thruxton. The fender has a very nice shape plus the elegant stiffeners in the middle and around the edge. The result is very high quality. Not as simple and smooth as the original one. The fender is delivered in black glossy lacquer.

Ein schön kurzer Alu-Kotflügel der Plug&Play anzubauen ist. Passt an alle Bonneville, Scrambler und Thruxton Modelle. Der Kotflügel ist aus sehr hochwertigem massiven Alu (wahlweise in poliert oder matt gebürstet). Er ist etwas breiter als der B-PP-A Au Kotflügel, den wir auch anbieten. Also perfekt geeignet für alle, die einen etwas breiteren Hinterradreifen (140, 150 oder 160) fahren. Ausserdem hängt er etwas tiefer als der originale, um eine flachere Linie zu bekommen (weniger Luft zwischen Kotflügel und Reifen).    

Aluminum mudguards in the Heavy Duty Style For all models with spoked wheels. What does that mean ? This mudguard is made of solid solid (made of 3mm thick aluminum). These mudguards feel really high quality and at the price. The mudguard is simply screwed onto the original bracket (no other accessory or holder is required).

Alu Bobber fender in heavy duty short style For all models with spoked wheels. What does that mean ? This mudguard is made of solid solid (made of 3mm thick aluminum). These mudguards feel really high quality and at the price. The mudguard is simply screwed onto the original bracket (no other accessory or holder is required).

Seat and fender combination. This beautiful Flat Track of the company JVB, gives your machine a whole new Loook! Perfect fit for Scrambler, Flat Track and Bobber conversions. Gives the tail in conjunction with the seat of the machine a nice flat line. The tail is available in two versions (please choose). Version1: The kit can be plug & play to an original motorcycle. Version2: The tail is shorter and the rear frame of the machine must be shortened / cut off. This is of course more effort, but also looks very good when the tail is a bit shorter. Matching license plate holder & license plate light holder can be found in the accessories of this description. The tail light is included.

Aluminum front fender for 17 inch wheel tags. Handmade and polished. With a really very shapely holder. Easy to paint when a different color is desired. Must be adapted ! Also suitable for Triumph with 17 cast wheel, please select model.

Styling front fender from motorcycle designer Jens von Brauck. Nice and tight and in a perfect quality. This GRP part is not laminated but pressed. This results in a nice smooth surface. Plug & Play. Ready for painting. The fender is the shortest we have in the porgram and gives the front a very cool look, because you can see quite a bit of the tire but still has a fancy fender on it.In addition, the fender lies nice and flat over the tire.