Indicator light for LED indicators
€14.95*
Pick your accessory
from €49.00*
€84.95*
from €69.95*
€139.95*
from €92.00*
from €89.95*
from €86.00*
€79.94*
| Product number: | CB10732 |
| item number: | 207-025 |
Product information "Indicator light for LED indicators"
Is needed if you install LED turn signals and do not replace the flasher relay. One set is enough for a pair of turn signals.
These resistors are the universal solution for virtually all vehicles and all LED turn signals, if there is a problem with the flashing frequency (even on models where you can set the frequency in the speedometer).
It is also sufficient if you install a set of resistors (usually offers better for space reasons in the back), although you install 4 LED turn signals on the vehicle.
| Models BMW R nineT: |
|
|---|---|
| Models Triumph AC until 2015: |
|
| Triumph LC models from 2016: |
|
| BMW R nineT |
R nineT /5 EU 4
R nineT Classic EU 3
R nineT Classic EU 4
R nineT Classic EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
|
|---|---|
| BMW R12 |
R12 Crusiser
R12 nineT
|
| Triumph 400er |
Scrambler 400 X
Speed 400
|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
|
600
600
600
600
There aren't any asked questions yet.
Zubehörartikel
Motogadget m.blaze Pin Indicators
CB11047.1M / 1
From
€49.00*
The new pin sets new standards for surface-mounted indicators with power LED technology.Its tiny dimensions and reduced design almost make it disappear on the vehicle. As soon as it lights up, IntensiLED® Technology makes it extremely bright and definitely impossible to miss.In addition, the patented TranzLight® Technology (TLT) with a large beam angle ensures optimum visibility and safety.The indicator has ECE approval as front and rear direction indicator. The aluminium housing is CNC-turned and available in black anodised or highly polished finish. The Bilnker are sold individually.
Frame tube LED turn signal
CB12404 / 600
€84.95*
A pair of round LED turn signals that fits exactly in the rear frame tube of your Triumph.
The turn signals can be inserted into the tubes and then still need to be glued with silicone. Cleaner and more inconspicuous you can not hide the turn signals in the rear area of the motorcycle.
Dimensions of the turn signals (see also picture) A1: 13 mm A2: 9 mm D1: 22 mmD2: 20 mmThreaded bolt: M8, length: 12 mm
Product Information:Made of a black aluminum ring with tinted glass. In this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, allowing for an extremely small size. The outer ring, on the other hand, is made of the new COB technology (Chip On Board). Due to the new LED chip embedding for high-power LEDs, a very high luminance is achieved with currently the best possible efficiency and service life. In addition, higher light values can be achieved than with conventional LEDs. This module is supplied with a black anodized aluminum ring that fits over the base body.
Kellermann Micro
CB11162M / 600
From
€69.95*
Kellermann Micro LED Blinker in black.
As used by Kellermann in the highest quality.
The turn signals are available as simple turn signals & as turn signal / taillight combination. At the turn signal / taillight combination is integrated into the turn signal taillight, turn signals & brake light. Both versions are of course with E-number.
The price is for a turn signal.
Pico LED Turn Signal
CB12469 / 0
€139.95*
A PAIR Pico aluminum LED turn signals from the brand Motone from England. With E-number & road approval.
The very high quality Motone turn signals are made of a full metal housing and have an Osram SMD LED insert.
The Pico turn signals are the only turn signals in our range, where the cables are sheathed with a fabric hose and also have a sleeve included with which the nut / thread is covered. This is visually and haptically really nice! The turn signals have an M8 thread & have a 3.9mm Japan plug at the cable ends. Under the accessories in this description you will find model specific turn signal plugs for your motorcycle.
The Pico turn signals have a classic bullet design and are the absolute perfect size for our Modern Classic bikes. They are nice and small, but not too tiny. Dimensions: W 18 x H 44 x D 25.5 mm
Rizoma IRIDE taillight / turn signal
CB11271M / 0
From
€92.00*
Beautiful classic taillight / winker combination "IRIDE" from Billet aluminum from Rizoma in all top top quality. State-of-the-art technology makes it possible to incorporate both rear light, brake light and turn signals in one (LEGAL). This means there is no need for a central taillight. This makes for a completely clean tail which looks very good for some conversions! And thanks to the particularly bright LEDs, the turn signal is also seen very well when the rear light is also lit.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.
Kellermann Bullet Turn Signals
CB10574M / 2
From
€89.95*
Kellermann Bullet 1000 is milled from the solid. Aluminum in noble form and finish, uncompromising quality. The classic cartridge shape was reinterpreted and exactly in the right size, not too small, not too big. Glass diameter: 36.5mm, depth 50mm. Flowing forms and perfect transitions. The view remains on this blinker and glides along at the same time. The prices are per piece.
Suitable flasher for connection to the original wiring harness.
Rizoma LEGGERA Indicators
CB11274.2M / 0
From
€86.00*
Rizoma "LEGGERA" Mini Blinker made of billet aluminum in top quality. Minimalist blinkers for anyone who wants to have them as inconspicuous as possible, but do not want to forego safety and a noble workmanship. The turn signals are very bright thanks to modern LED technology.
The turn signals are with E-number. The price is for a single turn signal.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.
Blaze LED Turn signals
CB00093 / 600
€79.94*
Highsider aluminum LED turn signal pair in a modern discreet design.Modern LED technology ensures that the turn signals shine really bright and you are well seen.
Dimensions:A: approx. 40 mmB: approx. 55 mmC: approx. 20 mmD: 19 mm
Threaded bolt M8 x 1.25 mm, length: approx. 20 mm
Note / Tip: Accessories turn signals are always supplied by the manufacturers with universal plugs or completely without plugs. Who wants to connect the turn signals simply to the original wiring harness of his motorcycle, which can still order suitable turn signal plugs for his motorcycle (the plugs can be found under the accessories in this description).
Rizoma CLUB Indicators
CB11272M / 0
From
€82.00*
Rizoma "CLUB" Mini turn signals made of billet aluminium in highest top quality. This is what we modern classic fans want! Modern small turn signals in a classic round design.The turn signals shine very brightly by modern LED technology and are seen so despite their small size very well.The turn signals are E-numbered and therefore road legal. The price is for a single turn signal.Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.The turn signals are optionally available with white position light (only for front!) or without.
The indicators are sold individually.A resistor is included in the scope of delivery.
Kellermann Atto Indicators
CB11500M / 2
From
€59.95*
Kellermann Atto, the smallest turn signal available on the market! And that with E-number (so legal for front & back)! Perfect for anyone who just wants the turn signals to be as unobtrusive as possible on the bike. Especially in connection with the Atto rear light you get in the rear area an incredibly clean look. (The tail light can be found under accessories in this description).
On the second picture, we have installed the Atto blinker on the handlebars. This is possible with all Triumph models that have a 1 inch armature with a hole to mount the mirror. You have to convert the bike to handlebar mirrors (if not already from the factory like e.g. the bobbers), order a turn signal extension, and put a black washer on top (you can get it from us).
Never was a turn signal smaller. For comparison: the light area of the Atto® / Atto® Dark fits four times on a 1 cent coin! This consistent reduction opens up completely new design options on the motorcycle. Due to the Atto® / Atto® Dark, the "Blinker" component on the motorcycle can virtually disappear visually. This turn signal only stands out when it really needs to. When it flashes, it shines with an intensity that has made Kellermann's products legendary and the company a trendsetter time and again. The Atto® / Atto® Dark offers maximum brightness with minimal size, in short: it is "sensationally small - spectacularly bright". We recommend not to look directly into the light of this small power plant for too long! An optimized light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology **, the new EXtranz® - Extreme Optical Transparency Technology is used here for the first time Combination only possible.
Since the Atto turn signals only have an M5 thread and almost all holders and indicator mounts are designed for M8 threads, there is a suitable adapter for this (see accessory article in this description).
The price is for one turn signal
Rizoma VISION Indicators
CB11734.1M / 0
From
€97.00*
Rizoma "VISION" mini turn signals made of billet aluminium in highest top quality. The LED indicators have a sequential flashing function. This means that the individual LED´s go one after the other on / build up as you know it from the most modern cars (see product video).The turn signals are E-numbered and therefore road legal. The price is for a single turn signal.Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.A resistor is included in the scope of delivery.
The indicators are sold individually.
Motogadget Mo.Blaze Tens 3 Indicator/Rearlight
CB12071.1M / 0
€99.00*
The new Motogadget mo.blaze tens3 are currently the smallest street legal 3-1 turn signal / tail light combination turn signals in the world. 3-1 means that these turn signals combine tail light, brake light as well as turn signals in one housing and that legally.Due to the cleverly chosen design, the turn signals look chic and like a real turn signal despite their tiny size. Thus, they look really good on almost every motorcycle or, depending on their position, they are as good as not at all.Particularly advantageous with these turn signals is that they have an M8 thread despite their small size, which makes it possible to mount the turn signal on just about any bracket, adapter & tail from our range.
Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely no longer to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The mounted turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC machined and available in black anodized or mirror polished finish.
The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed.
Specifications:
Total length with thread
29 mm
Leangth without thread
11 mm
Largest diameter
11 mm
Wire leangth
ca. 110 cm
Weigth with wire
ca. 20 g
Mounting
M8 Gewindebolzen
Power consumption
ca. 1/2/3 Watt
LED Turn signals Old Style
CB00113 / 600
€49.95*
LED Blinker OS Style Pair. Alu housing black. 20mm housing. Stitch length 20mm. Decent unexpected look. Not too small and not too big. Just matching our classic twins. Super bright !!
Mini Bullet Indicators / Rear light
CB12308 / 600
€139.95*
A pair of 3-1 mini LED turn signal / tail light combination with aluminum housing.
The bullet turn signals have a nice classic shape, are very nice and small and have an excellent price - performance ratio. 3-1 turn signal / taillight means that the turn signals: turn signal, taillight & brake light combine in one housing and the whole road approved!
The turn signals have a modern SMD LED technology (12V2.7W)
- very high quality metal housing- E-mark- total length: 37mm- total width: 37mm- Turn signal head: 22mm Ø
Blaze indicator / taillight combination
CB11108 / 600
€129.95*
Blaze aluminum LED taillight-turn signal combination in a sleek modern design.In these turn signals tail light, brake light and turn signal is integrated. For a clean rear.With E-number!Dimensions: A: 39.5 mm / B: 55 mm / C: 19.5 mm / D: 19 mmThe turn signals are sold as a pair.Note / Tip: Accessories turn signals are always supplied by the manufacturers with universal plugs or completely without plugs. Who wants to connect the turn signals simply to the original wiring harness of his motorcycle, which can still order suitable turn signal plugs for his motorcycle (the plugs can be found under the accessories in this description).
Frame tube LED 3-1 turn signal / taillight
CB12405 / 600
€109.95*
A pair of round 3-1 LED turn signal-tail light combinations that fits snugly into the rear frame tube of your Triumph. 3-1 turn signals integrate turn signal, tail light and brake light in one housing and the whole legal with E-number.
The turn signals / taillights can be inserted into the tubes and must then be glued with silicone. Cleaner and more inconspicuous you can not hide the turn signals in the rear area of the motorcycle.
Dimensions of the turn signals (see also picture) A1: 13 mm A2: 9 mm D1: 22 mmD2: 20 mmThreaded bolt: M8, length: 12 mm
Product Information:Made of a black aluminum ring with tinted glass. In this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, allowing for an extremely small size. The outer ring, on the other hand, is made of the new COB technology (Chip On Board). Due to the new LED chip embedding for high-power LEDs, a very high luminance is achieved with currently the best possible efficiency and service life. In addition, higher light values can be achieved than with conventional LEDs. This module is supplied with a black anodized aluminum ring that fits over the base body.
Rizoma IRIDE Indicators
CB11270M / 0
From
€72.00*
Beautiful classic turn signals from Billet aluminum from Rizoma in all top top quality. The turn signals are very bright thanks to modern LED technology.
The turn signals are with E-number. The price is for a single turn signal.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.
Pico LED 3-1 tail light / indicator combination
CB12483 / 0
€159.95*
A PAIR of Pico aluminium LED 3 in indicator / rear / brake light combination from the Motone brand in England. With E-number & road approval.
The very high quality Motone indicators are made of a full metal housing and have an Osram SMD LED insert.
The Pico 3 in 1 turn signals are the only turn signals in our range where the cables are encased in a fabric tube and also have a sleeve included to cover the nut / thread. This is visually and haptically very nice! The turn signals have an M8 thread & have a 3.9mm Japan plug at the cable ends. You will find model-specific indicator plugs for your motorbike under the accessories in this description.
The Pico 3 in 1 turn signals have a classic bullet design and are the perfect size for our Modern Classic bikes. They are nice and small, but not too tiny either. Dimensions: W 18 x H 44 x D 25.5 mm
Classicbike-Raisch tips:Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorcycle, you can also order suitable blinker plugs for your motorcycle (you will find the plugs under the accessory items in this description).
Our years of experience have shown that unfortunately there is no rule as to which motorcycle models require a turn signal resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).
Rizoma CLUB S Taillights / Indicators
CB11273M / 0
From
€94.00*
Rizoma "CLUB S" Taillight / turn signal combination of billet aluminum in all top top quality. MDas is what we want Modern Classic fans! Modern small turn signals in a classic round design. Modern technology makes it possible to integrate the taillight, the brake light and the turn signals into one (LEGAL). This means there is no need for a central taillight. This makes for a completely clean tail which looks very good for some conversions! And thanks to the particularly bright LEDs, the turn signal is also seen very well when the rear light is also lit.
The turn signals are with E-number. The price is for a single turn signal.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.
Kellermann Bullet Rear light / indicator
CB10575 / 3
€109.95*
Colour:
Black
Kellermann Bullet 1000 is milled from the solid. Aluminum in the finest form and finish, uncompromising quality. The classic cartridge shape has been reinterpreted and just the right size, not too small, not too big. Glass diameter: 36.5mm, depth 50 mm. Flowing shapes and perfect transitions. The eye lingers on this turn signal and at the same time glides along it.The turn signals are sold individually.Note / Tip: Accessories turn signals are always supplied by the manufacturers with universal plugs or completely without plugs. Who wants to connect the turn signals simply to the original wiring harness of his motorcycle, which can still order suitable turn signal plugs for his motorcycle (the plugs can be found under the accessories in this description).
Rizoma LEGGERA S Taillights / Indicators
CB11279.1M / 0
From
€92.00*
Rizoma "LEGGERA" taillight / turn signal combination of billet aluminum in top quality. Minimalist blinkers for anyone who wants to have them as inconspicuous as possible, but do not want to forgo safety and a noble workmanship. State-of-the-art technology makes it possible to incorporate both rear light, brake light and turn signals in one (LEGAL). This means there is no need for a central taillight. This makes for a completely clean tail which looks very good for some conversions! And thanks to the particularly bright LEDs, the turn signal is also seen very well when the rear light is also lit.
The turn signals are with E-number. The price is for a single turn signal.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.
Little No. One indicators
CB11424M / 10
From
€99.90*
Tiny LED turn signals from a CNC-milled aluminum housing in deep black anodized (with E-number).The turn signals can be attached to all flat surfaces on the motorcycle (minimum size of the surface: approx. 11x26mm) and are simply glued to the motorcycle with a special adhesive (supplied). Perfect for everyone who just wants to have his turn signals mounted as inconspicuously and discreetly as possible. No drilling or screwing is necessary.The price is for one pair. Please choose if the turn signals should be for front or for rear (because there are different numbers of LED´s)
Kellermann Atto Indicators
CB11613 / 2
€99.95*
Kellermann Atto, the smallest indicator/taillight/brakelight combination on the market! And that with E-number (so these turn signals can be installed in the rear and serve at the same time as turn signals, rear light & brake light with E-number!)! Perfectly suitable for everyone who wants to have the turn signals simply as inconspicuous as possible on the motorcycle.Never was a turn signal smaller. For comparison: The light area of the Atto®/Atto® Dark fits four times on a 1 cent coin! This consistent reduction opens up completely new design options for motorcycles. With the Atto®/Atto® Dark, the "turn signal" component on the motorcycle can virtually disappear. This turn signal only attracts attention when it really has to.When it then flashes and the rear light illuminates, it shines with an intensity that has made Kellermann products legendary and the company a trendsetter again and again. The Atto®/Atto® Dark offers maximum luminosity at minimum size, in short: it is "sensationally small - spectacularly bright". We recommend not to look too long directly into the light of this small power plant!Optimized light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology**, the new extreme Optical Transparency Technology is used here for the first time.combination.
Since the Atto turn signals only have an M5 thread and almost all holders and indicator mounts are designed for M8 threads, there is a suitable adapter for this (see accessory article in this description).The price is for one turn signal
Motogadget Mo.Blaze Tens 1 & 4 Indicator
CB12070.2M / 0
From
€59.00*
The new Motogadget mo.blaze tens1 & 4 are currently the smallest road legal turn signals in the world. Due to the cleverly chosen design, the turn signals look chic and like a real turn signal despite their tiny size. Thus, they look really good on almost every motorcycle or, depending on their position, they stand out as good as not at all.Particularly advantageous with these turn signals is that they have an M8 thread despite their small size, which makes it possible to mount the turn signal on just about any bracket, adapter & tail from our range.
Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely no longer to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The mounted turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC milled and available in black anodized or mirror polished finish. In addition, the turn signal is optionally available as a normal turn signal and as a version with position light. The turn signals with position light are ONLY suitable for the front. These shine permanently white and ensure that you are better seen when driving behind.
The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed.
Specifications:
Total length with thread
29 mm
Leangth without thread
11 mm
Largest diameter
11 mm
Wire leangth
ca. 110 cm
Weigth with wire
ca. 20 g
Mounting
M8 Gewindebolzen
Power consumption
ca. 1 Watt
Mini Bullet Indicators
CB12307 / 600
€109.95*
A pair of mini LED turn signals with aluminum housing.
The bullet turn signals have a beautiful classic shape, are very nice small and have an excellent price - performance ratio. The turn signals have a modern SMD LED technology (12V2,7W)
- very high quality metal housing- E-mark- total length: 37mm- total width: 37mm- Turn signal head: 22mm Ø