Thunderbolt LED Headlight

Product information "Thunderbolt LED Headlight"

The Thunderbolt LED headlight is a very minimalist and flat headlight. With the headlight (in combination with a matching lamp holder), you can give your machine a really nice flat and close to the motorcycle front. Photos say more than words here.
The light of this headlight is simply a poem. It looks on the one hand visually very nice (especially the central strip) and on the other hand it makes the night into day. The headlight is really nice and bright and ensures a safe ride even in the dark.

Model specific mounting instructions can be found below in this description.

The headlight has for mounting left & right each a M8 thread. On the back are also 6x M6 threads (two each at the top, middle and bottom).

Dimensions:
Housing diameter: 170 mm / Depth: 84 mm / Distance mounting hole (center) to end of housing: approx. 48 mm.

Connectors:
3-pin combo plug: yellow = low beam (+) / blue = high beam (+) / black = ground (-)
Extra cable: white = position light (+) / black = ground (-)
For connecting to a motorcycle that has a conventional glass base connection for the parking light, we offer a suitable adapter (see accessories article in this description)

 

Models BMW R nineT:
  • R nineT /5 EU 4
  • R nineT Classic EU 3
  • R nineT Classic EU 4
  • R nineT Pure EU 4
  • R nineT Racer EU 4
  • R nineT Scrambler EU 4
  • R nineT Scrambler EU 4.
  • R nineT Urban GS EU 4
Models Triumph AC until 2015:
  • Bonneville SE Gussrad
  • Bonneville T100 EFI
  • Bonneville T100 Vergaser
  • Scrambler EFI
  • Scrambler Vergaser
  • Speedmaster / America
  • Thruxton 900 EFI
  • Thruxton Vergaser
Triumph LC models from 2016:
  • Bobber
  • Bobber Black
  • Bonneville T100
  • Bonneville T120
  • Scrambler 1200 XC
  • Scrambler 1200 XE
  • Speed Twin
  • Speedmaster
  • Street Cup
  • Street Scrambler
  • Street Twin
  • Thruxton 1200
  • Thruxton 1200 R
  • Thruxton 1200 RS
BMW R nineT
R nineT /5 EU 4
R nineT Classic EU 3
R nineT Classic EU 4
R nineT Classic EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
3
3
3
3

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Standlicht Adapter für LED Scheinwerfer Umbau CB11884 / 620
Mit dieserm Adapter kann man ganz einfach, ohne Kabel abzuschneiden und zu löten, das Standlicht eines LED Scheinwerfers an ein Motorrad anschließen, das serienmäßig einen einfachen H4 Scheinwerfer mit Standlichtbirne hat.

€6.95*
Headlight Grill Thunderbolt LED CB12287 / 2
This lamp grid was specially designed for the KOSO Thunderbolt LED headlight: The struts are precisely matched to its design. As a result, the grille integrates perfectly into the modern look of the KOSO Thunderbolt - especially in combination with its daytime running light. The lamp grille is designed to use either the upper M6 fasteners on the back of the Thunderbolt LED headlight, or the lower ones. This also allows the lamp grid to be combined with a headlight mount that uses the lower rear M6 mounts for attachment.(For example, our holder for the RnineT.) The lamp grid is made of stainless steel, which is laser cut, edged and then TIG welded. The edges of the lamp grid are then rounded before it finally receives its satin black finish through a resistant powder coating. Like all KRT Frameworks parts, the lamp grid is developed and manufactured at our plant in Beelen. For the few jobs that are outsourced to service providers (e.g. powder coating and painting), we work together with companies from the region. This way we can happily give KRT products the label "Made in Germany".

€119.00*
LSL Headlight Brackets adjustable CB12230M / 600
CNC machined, black anodized aluminum lamp holders from LSL. In these lamp holders, the screw connection of the mounting braces is arranged in a line to the fork legs. By rotating the lamp clamps, the holder can be adjusted so infinitely variable to the required width of the headlight. As with the well-known LSL lamp holders, the rotating version of the clamps are made of aluminum, black anodized and available in the diameters of the common motorcycle fork tubes.Choose the variant that fits your vehicle. There are the holders with in 3 different lengths (the strut) to get a perfect distance from the headlight to the motorcycle (please measure it on your motorcycle.Below the pictures you can see a drawing that illustrates from where to where the different brackets have the specified dimension.Long: 82mmShort: 67mmExtra short: 40mm There are also holders for different fork diameters (please measure on your bike). The holders have a nicely integrated 8mm turn signal mount in the strut. A perfect position to mount a small turn signal, such as the Motogadget pin turn signal from our range.If you don't want to mount a turn signal at this position, we recommend our turn signal plugs M8, with which you can easily close the hole (see accessories in this description). The assembly instructions are available under the downloads in this description.

From €149.95*