Pico LED Turn Signal

Product information "Pico LED Turn Signal"

A PAIR Pico aluminum LED turn signals from the brand Motone from England.
With E-number & road approval.

The very high quality Motone turn signals are made of a full metal housing and have an Osram SMD LED insert.

The Pico turn signals are the only turn signals in our range, where the cables are sheathed with a fabric hose and also have a sleeve included with which the nut / thread is covered. This is visually and haptically really nice!
The turn signals have an M8 thread & have a 3.9mm Japan plug at the cable ends. Under the accessories in this description you will find model specific turn signal plugs for your motorcycle.

The Pico turn signals have a classic bullet design and are the absolute perfect size for our Modern Classic bikes. They are nice and small, but not too tiny.
Dimensions: W 18 x H 44 x D 25.5 mm

BMW R nineT
R nineT /5 EU 4
R nineT Classic EU 3
R nineT Classic EU 4
R nineT Classic EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
BMW R12
R12 Crusiser
R12 nineT
Triumph 400er
Scrambler 400 X
Speed 400
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Indicator cables BMW CB11357 / RS0
With these cable adapters accessory flashers can be easily connected to the original harness without cutting this broken. On most common turn signals, the opposite side of the cable fits on all Rizoma turn signals.

€12.95*
Indicator light for LED indicators CB10732 / RS600
Is needed if you install LED turn signals and do not replace the flasher relay. One set is enough for a pair of turn signals. These resistors are the universal solution for virtually all vehicles and all LED turn signals, if there is a problem with the flashing frequency (even on models where you can set the frequency in the speedometer). It is also sufficient if you install a set of resistors (usually offers better for space reasons in the back), although you install 4 LED turn signals on the vehicle.

€14.95*
Blinker LC Indicator side CB11072 / RS-20
The matching flasher in the set (4 pieces for a pair of turn signals) in order not to cut the original wiring harness. These plugs are crimped onto the cables of the turn signals and can then be easily and quickly plugged on the cable harness side.

€8.90*
Pico LED 3-1 tail light / indicator combination CB12483 / RS0
A PAIR of Pico aluminium LED 3 in indicator / rear / brake light combination from the Motone brand in England. With E-number & road approval. The very high quality Motone indicators are made of a full metal housing and have an Osram SMD LED insert. The Pico 3 in 1 turn signals are the only turn signals in our range where the cables are encased in a fabric tube and also have a sleeve included to cover the nut / thread. This is visually and haptically very nice! The turn signals have an M8 thread & have a 3.9mm Japan plug at the cable ends. You will find model-specific indicator plugs for your motorbike under the accessories in this description. The Pico 3 in 1 turn signals have a classic bullet design and are the perfect size for our Modern Classic bikes. They are nice and small, but not too tiny either. Dimensions: W 18 x H 44 x D 25.5 mm   Classicbike-Raisch tips:Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorcycle, you can also order suitable blinker plugs for your motorcycle (you will find the plugs under the accessory items in this description). Our years of experience have shown that unfortunately there is no rule as to which motorcycle models require a turn signal resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

€159.95*
Indicator original Triumph connector CB10742 / RS-100
The matching flasher in the set (4 pieces for a pair of turn signals) in order not to cut the original wiring harness. These plugs are crimped onto the cables of the turn signals and can then be easily and quickly inserted on the cable harness side.

€9.95*