The Shorty Pro 2 LED mini taillight is extremely small and intended for installation, for example, a frame. Despite its minimal size, the taillight is with an E-number and legal. We have the taillight until now always (with the help of the welded housing) installed in the rear frame / round arch of motorcycles (see also mounted pictures). But of course it can also be installed in a fairing or similar. The matching weld-in housing to the Shorty tail light, you will find under the accessories in this description.   Dimensions: Width: 40 mm Height: 8,5 mm Depth: 13 mm Technical data: Yellow cable = driving light (+) Red cable = brake light (+) Black cable = ground (-)

The mo.blaze tens2 from motogadget is the smallest taillight/brake light combination in the world. Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to IntensiLED® Technology and definitely not to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The taillight / brake light combination has an ECE approval as a rear taillight and brake light. The aluminum housing is CNC machined and available in black anodized or mirror polished finish. The taillight / brake light combination can be operated like any standard LED light with 12 V. The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed. Specifications: Total length with thread 29 mm Leangth without thread 11 mm Largest diameter 11 mm Wire leangth ca. 110 cm Weigth with wire  ca. 20 g Mounting M8 Gewindebolzen Power consumption ca. 1/1 Watt

The Rizoma DBL system is a safety device that activates a flashing brake light to warn vehicles behind an intense and sudden braking. The device is activated when properly mounted on the motorcycle when the vehicle makes a sudden deceleration / emergency stop by flashing the brake light at a frequency of 4 Hz (flickering light as known from cars during an emergency stop). The system only works at speeds of 40 km/h and above. The DBL-Box can easily be connected to the rear light of the motorcycle or to a combination indicator.The sensor is an acceleration sensor and therefore does not need a connection to the brake hydraulics.

Kellermann Atto Taillight, the smallest LED taillight available on the market! And that with E-number! Perfect for anyone who wants to have the taillight just as inconspicuous as possible on the bike to get as clean a tail as possible (see pictures) Especially in connection with the Atto turn signals you get in the rear area an incredibly clean look. (The indicators can be found under Accessories in this description). The Quadrature of the circle has been achieved with the Atto RB: This rear and brake light is extremely small and also spectacularly bright. Compact and bright: This combination makes the Atto® RB a real sensation! For comparison: the light surface of the Atto® fits four times on a 1 cent coin! This consistent reduction opens up completely new design options on the motorcycle. Due to the Atto® RB, the component "rear and brake light" on the motorcycle can virtually disappear visually. When it shines, it shines with intensity that made Kellermann's products legendary and our company a trendsetter over and over again. The Atto RB offers maximum brightness with minimal size, in short: it is "sensationally small - spectacularly bright". We recommend not to look directly into the light of this small power plant for too long! An optimized light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology is the first application of our new EXtranz - Extreme Optical Transparency Technology makes this combination possible.

Rizoma LED Taillight in Cafe Racer Style. Rizoma means: high quality, this also applies to this taillight. A chic, small LED aluminum rear light in deep black anodized, which is manufactured in the highest quality. Fits perfectly with all conversions, with a short fender in which a central tail light is to be installed (see attachment photo on the R9T).

Finally a small taillight, in the classic design, that despite the small size is bright. Everyone who now thinks LED with a classic motorcycle, it does not fit. Is wrong, because the rear light fits like ass on bucket to our bikes and also the LED light looks good. The housing is completely metal. In the non-visible area, there is a small slot on the underside, in which the license plate lights. Tail light is with E number. Rücklicht ist mit E-Nummer

LED rear light MILES with license plate light. Black anodized metal housing with oval holes and holder, red glass, E-tested. Here to the ready wired cable set

LED taillight. Clear optics. Suitable for rear mountings, where the fender has been removed and a lamp holder can be manufactured. The threads of the seat attachment can be used for this purpose. Fits to Heck-Eli Kit.

Reflector with holder. Ugly but mandatory. Only for the TUEV demonstration.

Taillight Sparto. Classic round optics in chrome-plated or black metal with E-number and license plate holder. Looks beautiful and really classic.A license plate light is also integrated.Blinker holders are not included in the rear light. Matching turn signal holders can be found in the accessories of this description.In the accessories you will also find ready-made cable sets, plugs, etc. to make installation easier.

Classic Round Tail light black This is a wired cable set

Bates Style taillight LED black. Super class metal metal. With e-number. Here to the ready wired cable set

Lucas Light tail light combination complete kit. The Lucas Light Kit is a nice classic turn signal tail light combination, which is screwed onto the original fender (but new holes must be drilled!). The original holes are then covered by the license plate). Tail light as well as turn signals are with E-number. Included in the kit is: Lucas taillight Drops aluminum turn signal Turn signal holder Cable set for turn signal & tail light Optionally, the kit is available in black (turn signal & taillight black) and silver (taillight & turn signal silver)

Old School taillight. LED black metal housing, red glass - with number plate illumination and E number

Lucas style metal tail light.The metal housing is available in silver or black.Much nicer than the original giant plastic tail light.For easy connection we recommend to order a cable set. See accessories article in this description. We also offer a practical indicator holder that is ideal for attaching to the tail light (see accessories article).Or you can order the tail light as a complete kit (see accessories article in this description).Attention, this tail light cannot be mounted plug & play on the holes of the original mudguard. 3 new holes have to be drilled. The original holes are then covered by the rear light and the number plate (if it is attached to the rear light).