Motogadget Disc / Cone Adapter
€99.00*
Pick your accessory
€99.00*
€99.00*
€129.00*
€99.00*
from €99.95*
€129.00*
€99.00*
€129.00*
| Product number: | CB12033 |
| item number: | 7001061 |
Product information "Motogadget Disc / Cone Adapter"
Motogadget handlebar extensions that allow all Motogadget M.View handlebar end mirrors to be mounted without having to move the fittings on the handlebars further inwards.
In addition, the Motogadget M.Blaze Disc handlebar end turn signal can be mounted on the outside of the adapter.
It creates a clamping surface for the handlebar end mirror outside the steering tube and at the same time allows the mounting of the handlebar end turn signal. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise as well as mo.view street.
It is CNC machined from billet aluminum and anodized black.
The clamping in the handlebar end is done by tightening a M6 screw inside the adapter, which expands the clamping pieces and allows a stable mounting. Then the mirror clamp on the adapter is tightened and thus simultaneously clamped the handlebar end turn signal.
The bar adapter uni disc/cone comes with two clamps for the left and right side of the handlebar. They fit perfectly to our grips mo.grip as well as the push button fittings mo.switch basic and mo.switch mini.
They are mounted directly in the end of the handlebar (22 mm, 7/8 and 1 inch) with a free inner diameter of 12 to 21 mm (without internal thread) and a length of 90 mm.
Dimensions:
Fits all handlebars with 22 mm, 7/8 and 1 inch with a free inner diameter of 12 to 21 mm.
Total length: approx. 105 mm, at least 90 mm free inner tube length required
Width of clamping surface for mirror: 8 mm, fits all mo.view handlebar end mirrors
Diameter of clamping surface: 1 inch, fits all mo.view handlebar end mirrors
Weight (1 piece): 55 g
Scope of delivery:
2 x bar adapter uni disc/cone, instructions
Attention does not fit on motorbikes with original handlebars that are not hollow from the inside (which is the case with almost all original handlebars).
| Models BMW R nineT: |
|
|---|---|
| Models Triumph AC until 2015: |
|
| Triumph LC models from 2016: |
|
| BMW R nineT |
R nineT /5 EU 4
R nineT Classic EU 3
R nineT Classic EU 4
R nineT Classic EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
|
|---|---|
| BMW R12 |
R12 Crusiser
R12 nineT
|
| Triumph 400er |
Scrambler 400 X
Speed 400
|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
|
600
600
600
600
There aren't any asked questions yet.
Zubehörartikel
Motogadget M.View Road Mirror
CB11623
/ RS0
€99.00*
Motogadget M.View Road handlebar ends mirror in a sporty classic oval design(road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 114 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View - Classic 130 Mirror
CB11625
/ RS0
€99.00*
Motogadget M.View Classic 130 handlebar ends mirror in classic round design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view Classic 130 corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View Blade Mirror - FLIP
CB11680
/ RS1
€129.00*
Motogadget M.View Blade FLIP handlebar ends. The top sporty in tiny design (such a small and filigree mirror, in which you can still see quite well, we never had in our program) for 22 mm & 1" handlebars.
The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally.
These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.Dimensions:Width of mirror body: 100 mmHeight of mirror body: 60 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmWeight: 94 gThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.Translated with www.DeepL.com/Translator
Motogadget M.View Cruise Mirror
CB11836
/ RS0
€99.00*
Motogadget M.View Cruise handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.
Dimensions:Width of mirror body: 114 mm Height of mirror body: 80 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 125 g
Price per piece.
Motogadget Handlebar Indicator M.Blaze Disc
CB11132.2M
/ RS600
From
€99.95*
Noble handlebar end turn signals from Motogadget. The housing is CNC machined from aluminum. Because the indicators are so flat and have a clear glass, they are as good as not noticeable. Nestle by the appropriate size very perfectly to most handlebar grips.
Are very visible from the front and are also seen from behind (for behind, however, they are not recognized in the StvO as turn signals). Fit all handlebar sizes accessory handlebars with an Inndendurchmesser of 14mm - 21mm. In most original handlebars fit the turn signals unfortunately not. For BMW R nineT models, however, there are suitable adapters for the original handlebar (see accessory article in this description).
More elegant and cleverly solved you can not install a turn signal for the front. The aluminum housing in conjunction with the clear glass pane is an absolute eye-catcher.To get a particularly clean front, we recommend the Motogadget turn signals in combination with the perfectly matching handlebar end mirrors from Motogadget to combine. Matching adapters for this, in order not to have to move the fittings on the handlebars, are of course also available from Motogadget (everything can be found under the accessories in this description).If you want it to be perfect, you can order the matching handlebar grips (in the same diameter as the turn signals) from Motogadget.
The optical turn signal counterpart for the rear (Motogadget Pin) can be found in the accessories of this description.
For easy installation of the turn signals, we recommend model-specific turn signal plugs, so that nothing has to be cut off the original wiring harness.
Motogadget M.View Sport 130 Mirror
CB11624
/ RS0
€129.00*
Motogadget M.View Sport 130 handlebar ends mirror in a sporty angular design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View Spy Mirror
CB11626
/ RS0
€99.00*
Motogadget M.View Spy handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
Motogadget M.View Sport 60
CB11835
/ RS0
€129.00*
Motogadget M.View Sport handlebar end mirror WITH E-number. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.
Dimensions:Width of mirror body: 122 mm Height of mirror body: 83 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 128 g
The size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles. Price per piece.
Motogadget Mo.View Classic 60 Mirror
CB11837
/ RS0
€99.00*
Motogadget Mo.View Classic 60 handlebar end mirror with E-number in classic, round design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a brand new mirror technology! They come completely without mirror glass. The special thing about this mirror is the patented mirror surface, which is directly on the metal of the body. The aluminium itself is the mirror surface! This allows a weightless design without edge and frame and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted either upright or down on the handlebars (fits left & right). The mirror arm is also swiveling, which makes it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror clamps are made in the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge-free transitions when you mount everything
Dimensions:Diameter of mirror body: 96 mm Thickness of mirror body without ball head: 4.2 mm length of the mirror arm: 60 mm diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 10 mm Weight: 125 g
Price per unit.