Motone Triline handlebar end mirrors - WITH E-number - road legal. The new Triline aluminum handlebar end mirrors from Motone (England) are visually very beautiful, classic mirrors that perfectly match our classics.The Triline design paired with a matt, black anodized surface give the mirrors a very special look. The mirrors are not only a visual highlight, they are also technically top class. The Motone mirrors are the flattest mirrors with mirror glass known to us.The workmanship and the surface of the mirrors are also top class. The mirror glass used is highly scratch-resistant R1400 convex automotive glass. This has the advantage that a very large reflection angle is achieved (very good overall view to the rear). The mirrors are available in 2 sizes:- Size S (80mm diameter) WITHOUT E-number - Size M (100mm diameter) WITH E-number - road approval   Mounting options for the mirrors: - The mirrors are supplied with 2 different adapter rings so that the mirror can be clamped onto any handlebar with a 1" or 22mm diameter.If the mirror is clamped around a hollow accessory handlebar, we recommend the "Rizoma cap end weights" for a perfect finish (see accessory article in this description).- If you cannot clamp the mirror directly around the handlebars due to space problems, we recommend the "Handlebar extension - Motone", which can be installed in any hollow original handlebar. These then also serve as a clean handlebar end. Model specific mounting instructions with original handlebars: Water-cooled Triumph models - LC: The mirrors can be fitted plug & play to all original handlebars on Triumph LC models. To have a nice handlebar end we recommend the "Handlebar end caps Gemini" (see accessories in this description) Air-cooled Triumph models - AC:To mount the mirrors on the original handlebars, a handlebar extension is required. We recommend the "Handlebar extension - Motone". An M5 screw is also required (if you do not have this yourself, please contact us). You can find the handlebar extensions under the accessories in this description. BMW models:There is currently no solution for mounting the mirrors on the original handlebars.

Motone Turismo handlebar end mirrors - WITH E-number - road legal. The new Turismo aluminum handlebar end mirrors from Motone (England) are visually very beautiful & clean mirrors. The glossy black surface paired with the clean look provide a nice mix of modern design and a classic round shape. The mirrors are not only a visual highlight, they are also technically top class. The Motone mirrors are the flattest mirrors with mirror glass known to us.The workmanship and the surface of the mirrors are also top class. The mirror glass used is highly scratch-resistant R1400 convex automotive glass. This has the advantage that a very large reflection angle is achieved (very good overall view to the rear). The mirrors are available in 2 sizes:- Size S (80mm diameter) WITHOUT E-number - Size M (100mm diameter) WITH E-number - road approval   Mounting options for the mirrors: - The mirrors are supplied with 2 different adapter rings so that the mirror can be clamped onto any handlebar with a 1" or 22mm diameter.If the mirror is clamped around a hollow accessory handlebar, we recommend the "Rizoma cap end weights" for a perfect finish (see accessory article in this description).- If you cannot clamp the mirror directly around the handlebars due to space problems, we recommend the "Handlebar extension - Motone", which can be installed in any hollow original handlebar. These then also serve as a clean handlebar end. Model specific mounting instructions with original handlebars: Water-cooled Triumph models - LC: The mirrors can be fitted plug & play to all original handlebars on Triumph LC models. To have a nice handlebar end we recommend the "Handlebar end caps Gemini" (see accessories in this description) Air-cooled Triumph models - AC:To mount the mirrors on the original handlebars, a handlebar extension is required. We recommend the "Handlebar extension - Motone". An M5 screw is also required (if you do not have this yourself, please contact us). You can find the handlebar extensions under the accessories in this description. BMW models:There is currently no solution for mounting the mirrors on the original handlebars.

The LSL Retro mirror stands for classic, high-quality design combined with state-of-the-art functionality. With E-Certification Functionality means in the case of the retro mirror that the mirror glass is adjustable by a ball joint integrated in the mirror arm to provide an optimal view to the rear. In addition, the mirror arm can also be tilted inward, outward or straight down. So you get on the one hand an even better view to the rear to the other hand, this looks visually even better, because the mirror is not just straight up or down. The aluminum housing as well as the arms are blasted before anodizing glass bead, which provides a very noble and slightly matte surface. The mirror can be mounted directly around a handlebar (both 22mm and 1" clamped, for this the fittings must be pushed a bit inward) or in combination with the perfectly matching retro end weights (our recommendation). The Retro end weights, which also serve as a perfect handlebar end, can be found under the accessory items in this description. Dimensions: A Width head: 100 mm B Height head: 100 mm C Total width: 76.5 mm D Total height: 165 mm Stem length: 120 mm Mounting screw: M5 Scope of delivery: 1 piece incl. 1 and 7/8 inch adapter In black only in KW35 available again 

The LSL Retro mirror stands for classic, high-quality design.The mirror is adjustable by a, in the mirror arm integrated ball joint to ensure a good view to the rear. The aluminum housing and the arms are glass bead blasted before anodizing, which provides a very noble and slightly matte surface. The mirror can be mounted directly around a handlebar (both 22mm and 1" clamped, for this the fittings must be pushed a bit inwards) or in combination with the perfectly matching Retro end weights (our recommendation). The retro end weights, which also serve as a perfect handlebar end, can be found under the accessories in this description.The mirrors can be mounted both upwards and downwards. Dimensions: A Width head: 100 mm B Height head: 100 mm C Total width: 45 mm D Total height: 185 mm Stem length: 120 mm (to fastening) Mounting screw: M4X16Weight: 208 g Scope of delivery: 1 piece incl. 1 and 7/8 inch adapter

Motogadget M.View Road handlebar ends mirror in a sporty classic oval design(road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface!  Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators). The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 114 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.

Motogadget M.View Sport 130 handlebar ends mirror in a sporty angular design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface!  Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.

Motogadget M.View Classic 130 handlebar ends mirror in classic round design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface!  Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view Classic 130 corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.

Motogadget M.View Spy handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface!  Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.

Motogadget M.View Blade FLIP handlebar ends. The top sporty in tiny design (such a small and filigree mirror, in which you can still see quite well, we never had in our program) for 22 mm & 1" handlebars. The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally. These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.Dimensions:Width of mirror body: 100 mmHeight of mirror body: 60 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmWeight: 94 gThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.Translated with www.DeepL.com/Translator

Motogadget M.View Sport handlebar end mirror WITH E-number. Fits all 22mm & 1" handlebars. These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle! The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators). The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything. Dimensions:Width of mirror body: 122 mm Height of mirror body: 83 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 128 g The size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles. Price per piece.

Motogadget M.View Cruise handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars. These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle! The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position. Mounting: You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).  Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted). In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators). The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything. Dimensions:Width of mirror body: 114 mm Height of mirror body: 80 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 125 g Price per piece.

Motogadget M.View Street handlebar end mirror with E-number in classic, round design. Fits all 22mm & 1" handlebars. These new and beautiful Motogadget mirrors have a brand new mirror technology! They come completely without mirror glass. The special thing about this mirror is the patented mirror surface, which is directly on the metal of the body. The aluminium itself is the mirror surface! This allows a weightless design without edge and frame and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle! The mirror can be mounted either upright or down on the handlebars (fits left & right). The mirror arm is also swiveling, which makes it easy to mount the mirror in a perfect position. Mounting: You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).  Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted). In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror clamps are made in the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge-free transitions when you mount everything Dimensions:Diameter of mirror body: 96 mm Thickness of mirror body without ball head: 4.2 mm length of the mirror arm: 60 mm diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 10 mm Weight: 125 g Price per unit.

Motogadget M.View Street FLIP handlebar end mirror with E-number in classic, round design. Fits all 22mm & 1" handlebars. The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally. These new and beautiful Motogadget mirrors have a brand new mirror technology! They come completely without mirror glass. The special thing about this mirror is the patented mirror surface, which is directly on the metal of the body. The aluminium itself is the mirror surface! This allows a weightless design without edge and frame and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle! The mirror can be mounted either upright or down on the handlebars (fits left & right). The mirror arm is also swiveling, which makes it easy to mount the mirror in a perfect position. Mounting: You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).  Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted). In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror clamps are made in the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge-free transitions when you mount everything Dimensions:Diameter of mirror body: 96 mm Thickness of mirror body without ball head: 4.2 mm length of the mirror arm: 60 mm diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 10 mm Weight: 125 g Price per unit.

Motogadget M.View Pace handlebar end mirror WITH E-number. Fits all 22mm & 1" handlebars. The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally. These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle! The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators). The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything. Dimensions:Width of mirror body: 122 mm Height of mirror body: 83 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 128 g The size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles. Price per piece.

Motogadget M.View Cruise FLIP handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars. The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally. These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle! The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position. Mounting: You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).  Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted). In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators). The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything. Dimensions:Width of mirror body: 114 mm Height of mirror body: 80 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 125 g Price per piece.

Motogadget M.View Spy FLIP handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars. The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally. These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface!  Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.

Motogadget M.View Blade handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface!  Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view blade does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.

The Rizoma Spirit RS handlebar mirrors have a new design, but their classic shape fits perfectly into the classic bikes .. WITH E-number. A blend-reduced Convex mirror glass is used to ensure the best possible visibility. A mirror of the highest quality from billet aluminum. This mirror is not to be used with an original handlebars. Only in conjunction with an accessory handlebars. For mounting on an accessory handlebar, the additional bracket LP200B is required (see accessories in this description). The price is for a mirror.

The Rizoma Eccentrico Handlebar Clamp is the classic among the handlebars. WITH E-number . A blend-reduced Convex mirror glass is used to ensure the best possible visibility. A mirror of the highest quality due to the most extreme production, which is however beautifully nestled in the klaish desing of the Triumph Modern Classic models. In addition to the mounting on the original handlebars, an adapter as well as an additional handlebar weight is required (see accessories). If you mount an accessory handlebars, you can simply push them slightly further inwards and clamp the mirror directly over the handlebar, or use the mirror end weights (see accessories). The price is for a mirror.

The Rizoma Reverse Retro Handle Clamp is of the highest quality. Produced from billet aluminum in 3D. A blend-reduced Convex mirror glass is used to ensure the best possible visibility. A design that impresses with its classic form and still not noticeable, due to its small size. In addition to the mounting on the original handlebars, an adapter as well as an additional handlebar weight is required (see accessories). If you mount an accessory handlebars, you can simply push them slightly further inwards and clamp the mirror directly over the handlebar, or use the mirror end weights (see accessories). The price is for one mirror.

The Rizoma SPY-ARM handlebar end clamp mirror combines modern quality with a classic & minimalist design. WITH E-number in the Ø94.5 variant. A glare-reduced Convex mirror glass is used to ensure the best possible view. This mirror has the Atention as eye-catcher by its design on the motorcycle to attract attention, but to do this by its minimalistic design only to a small extent.The scope of delivery includes a handlebar extension, over which the mirror is clamped. This is also a perfect finish on the mirror. The fittings do not have to be pushed further inwards.An adapter is required in addition to the original handlebars (see accessories). For mounting on a handlebar accessory, universal clamping is required (see Accessories).The price is for a mirror. The Ø80mm mirrors are without E-number

The Rizoma SPY-R handlebar mirrors combine the latest quality and manufacturing with a classic & minimalist design. WITH E-number in the Ø94,5 variant. A blend-reduced Convex mirror glass is used to ensure the best possible visibility. This mirror has the eye-catcher as eye-catcher by its design on the motorcycle, but due to its minimalist design to do only to a small extent. Especially the small variant in Ø57mm looks very very nice and hardly falls (unfortunately without TÜV). An adapter is required in addition to the mounting on the original handlebars (see accessories). If you have an accessory handlebar mounted, the Rizoma handlebar mirror adapter uni. (see accessories). The price is for a mirror.

The Rizoma Revers Radial handlebar end clamp mirror, captivates by its modern design, which nevertheless looks classical by its elegant drop shape. WITH E-number. A glare-reduced Convex mirror glass is used to ensure the best possible visibility. A mirror of the highest quality due to modern production. As if from one piece, the mirror nestles into the classic design of your Triumph.Rizoma is not just an accessory manufacturer, but THE manufacturer. The surface of Rizoma milled parts is unique and impresses with its filigree milling lines. To mount them on the original handlebars, an adapter and a handlebar end weight is required (see accessories). If you mount an accessory handlebar, you can also simply push the fittings a little further inwards and clamp the mirror directly over the handlebar or use the mirror end weights (see accessories in this description).If the mirror is clamped directly over the handlebars, we recommend ordering the flat handlebar end cap from Rizoma in addition to the mirror to have a clean and perfect handlebar end (see accessories in this description). The price is for one mirror.

Handlebar mirror oval, which is simply clamped around the handlebar or on a steering wheel (if you do not want to push the dashboards inwards) see accessories in this description .. Quite expensive but really beautiful detail processing and multiple adjustment possibilities. The expert immediately sees the elaborate processing and the great surfaces. It does not get any better. Not too small, (105x58 mm) so you can see something. Available in black and silver. INDIVIDUALLY Fits to 1" Handelbares. Optically as technically a very good solution! Because of the many possibilities of adjusting the mirror you can really see very well.

Handlebar mirror round 75mm diameter, which is simply clamped around the handlebar or on a steering wheel (if you do not want to push the dashboards inwards) see accessories in this description .. Quite expensive but really beautiful detail processing and multiple adjustment possibilities. The expert immediately sees the elaborate processing and the great surfaces. It does not get any better. Not too small, (105x58 mm) so you can see something. Available in black and silver. INDIVIDUALLY Fits to 1" Handelbares. Optically as technically a very good solution! Because of the many possibilities of adjusting the mirror you can really see very well.

Original Triumph round handlebar end mirror pair with E-number, which can be mounted on both sides of the handlebars.The black mirrors have a nice contrast milling all around.Can be mounted Plug & Play on the original handlebars of the watercooled Triumphs.If you want to mount the mirrors on an accessory handlebar or on an aircooled Triumph, you have to work on the plastic adapter rings easily (cutting off a leading nose takes 2-3 minutes).Flat handlebar end caps for a nice handlebar end must be ordered separately.

Clubman bar end mirror 100 mm diameter with E-number. The mirror fits left & right. You can mount the mirror on 22 mm & 1" handlebars. If you do not want to push the fittings further inwards, then there are also matching handlebar extensions as end weights for the mirrors.

Handlebar end mirror made of aluminium with final weight against vibrations CNC milled very noble. End weights & mirror housings are available in silver or black. 60 or 75 mm mirror glass diameter. Fits 22 mm handlebars and 1" handlebars. The internal thread of the original handlebar must be removed or drilled out (only possible with air-cooled models).Otherwise an accessory handlebar must be installed, which is hollow from the inside.

Handlebar end mirror oval made of aluminium, for accessory handlebars or boring out the thread in the original handlebar. Quite expensive, but really beautiful detail processing and multiple adjustment possibilities. The connoisseur sees immediately the complex processing and the great surfaces. It couldn't be better. not too small, (105x58 mm) so you can see something. The mirrors are sold separately. Is only mounted on accessories handlebars (which are hollow from the inside).