Rizoma Namic mirror with E-number. Probably the highest quality and most elegant mirrors in our range. The mirror is made from very high-quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milled structure. You can see and feel the high quality of these mirrors at first glance. Thanks to the ingenious mounting system that Rizoma uses here, the mirror does not protrude so far upwards and look like mouse ears. It runs nice and flat over the handlebars. The shape is a beautifully classic teardrop shape. The mirrors are sold individually. Model specific mounting instructions: An additional adapter is required for all models. BMW motorcycles:The Riz mirror adapter RadialRS + Dynamic BMW is required for mounting on the original mount of BMW models (see accessories in this article). Water-cooled Triumph LC models: An additional, model-specific adapter is required to mount the mirror (see accessories article in this description). 1. adapter "Riz mirror adapter for fittings with hole", which is suitable for all models that have a hole in the fitting ex works for the mirror mount 2. adapter "Riz mirror adapter for fittings with thread", which is suitable for all models that have a thread for mirror mounting on their fittings ex worksThruxton 1200 R / RS - Speed Twin 1200 - Scrambler 1200: These models do not have a mirror mount ex works. In addition to the adapter 2, the adapter mirror adapter "Thruxton R / Speed Twin / Scrambler" is also required Air-cooled Triumph AC models: The "Riz mirror adapter for fittings with hole" adapter is required for all AC models.

The new Cayo cell phone holder system from Motogadget made in Germany.In our opinion, the Cayo system is the best, most sophisticated and easiest to use cell phone holder & charging system available on the market. In contrast to most other manufacturers, you don't have to choose between numerous adapters / accessories etc. With the moto.dokk comes a perfect handlebar mount that integrates everything you really need. Handlebar mount / inductive charging / anti-vibration system - The system comes with various adapter rings that allow the mount to be fitted to any handlebar. - A cable for connection to a USB-A socket is included (most modern motorcycles have such a socket). This allows the cell phone to be charged inductively via the holder. If you do not have a USB-A socket, you can order the "battery.dokk" to charge your cell phone via the holder (see accessories in this description).- An anti-vibration plate (to prevent damage to the cell phone / camera) and an inductive charging function are integrated in the holder.   1-click holder / cell phone case We have tested the holder ourselves on some of our motorcycles and it works perfectly! The cell phone sits firmly in place with a flick of the wrist (no annoying turning / getting stuck or similar). The cell phone can be mounted in either portrait or landscape format. You have 2 options for attaching the cell phone to the holder:1. you order the stylish and very flat Cayo cell phone case "phone.dokk" (see accessories in this product description).2. you order the "uni.dokk" adhesive pad, which can be universally attached to any cell phone (see accessories in this product description). Classicbike-Raisch tip For very good and motorcycle-friendly navigation, we recommend the Calimoto app.   Summary: The full-featured mounting system. Attaches your smartphone quickly and securely to any motorcycle. Choose a suitable case or universal pad. Direct connection to the vehicle battery is possible with our battery.dokk. Integrated vibration decoupling Integrated inductive charging smartphone docking in portrait & landscape formatSuitable for all handlebar diametersOur moto.dokk is a mounting system for quickly and securely attaching your smartphone to your vehicle. The extremely compact housing integrates inconspicuously into the vehicle and combines inductive charging and vibration decoupling. - The scope of delivery includes a connection cable for a USB-A socket on the vehicle. When using an existing USB port on the vehicle, this must be switched on and off with the ignition. Proper functioning of inductive charging is guaranteed with our CAYO phone.dokk cases, provided the phone supports inductive charging. - When using a CAYO uni.dokk pad, inductive charging may be limited or not possible. - If there is no USB port on the vehicle, we recommend our CAYO battery.dokk for direct connection of the moto.dokk to the 12V vehicle battery. Suitable for all standard handlebar diameters and Fatbars:- 22.2mm (7/8")- 25.4mm (1")- 28.6mm (1 1/8")- 31.8mm (1 1/4")- 35.0mm (1 3/8")  

The new Cayo cell phone holder system from Motogadget, made in Germany.In our opinion, the Cayo system is the best, most sophisticated and easiest to use cell phone holder system on the market. The simple / inexpensive mount for short tours - The bike.dokk mount is a simple cell phone holder with which you can attach your cell phone to the handlebars of your motorcycle. Various adapter rings are included in the scope of delivery, which enable mounting on all common motorcycle/bicycle handlebars.- We recommend this mount to all customers who only need the mount occasionally for short trips. We recommend the "moto.dokk", which is equipped with a charging function and an anti-vibration system to protect the cell phone camera, for those who regularly have their cell phone on the motorcycle for longer periods of time. 1-Click holder / cell phone case We have tested the holder ourselves on some of our motorcycles and it works perfectly! The cell phone sits firmly in place with just one click (no annoying turning / getting stuck or similar). The cell phone can be mounted in either portrait or landscape format. You have 2 options for attaching the cell phone to the holder:1. you order the stylish and very flat Cayo phone case "phone.dokk" (see accessories in this product description).2. you order the "uni.dokk" adhesive pad, which can be universally attached to any cell phone (see accessories in this product description). Classicbike-Raisch tip For very good and motorcycle-friendly navigation, we recommend the Calimoto app.   Summary The quick and secure mounting system for your smartphone. Suitable for bicycles and motorcycles. Select suitable cover or universal pad separately. Very small & compact on the handlebarsQuick & secure attachmentPortrait & landscape format without conversionSuitable for all common handlebar diameters and Fatbars: - 22.2mm (7/8")- 25.4mm (1")- 28.6mm (1 1/8")- 31.8mm (1 1/4")- 35.0mm (1 3/8")  

With the Cayo phone.dokk, the cell phone can be attached to all Cayo holders with a flick of the wrist. The case has an elegant and very flat design to not only be practical but also look good. The surface of the case consists of a very pleasant soft-touch surface. As a small but not unimportant side effect, the case also protects your cell phone from damage if it falls out of your hand. An extra strong magnet is integrated into the case, allowing you to attach your phone to all magnetic mounts.

With the Cayo uni.dokk, you can attach your cell phone to all Cayo holders in one easy step. Don't fancy an extra cell phone case? Or do you already have one that you want to keep using? No problem! The uni.dokk is a strong adhesive pad that sticks to all surfaces.

The smart power adapter for connecting the moto.dokk directly to the vehicle battery via USB-C plug. Quick and easy to connect directly to the battery terminals  switches off when not in use, no battery discharge  no time-consuming search for ignition plus for the connection

A really nice, classic tank bag made from canvas/sailcloth. Quality / Fastening / 2-1 tank bag & backpack This VERY high-quality tank bag focuses on the essentials for a tank bag paired with a very nice design. The tank bag is attached to the motorcycle in the classic way with 2 straps, guaranteeing a very secure and firm hold. The straps are fitted with a cover that makes it possible to conceal the metal straps.When removed from the motorcycle, the tank bag can also be used as a normal rucksack, which is particularly practical on tours or short trips. This gives you the option of not leaving your valuable belongings on the motorcycle when you are away from it. Water-repellent / care The backpack is made of thick / very high-quality canvas fabric. The fabric is lightly waxed and therefore slightly water-repellent (not waterproof). This can be reinforced with a waterproofing spray. Suitable waterproofing spray and wax (to care for the bag so that you can enjoy it for a long time) can be found under accessories in this product description. Storage space The tank bag has two pockets that are accessible from the outside and can be opened with a high-quality metal zipper. There is also a small additional pocket on the side where you can stow things that you need to have to hand quickly (e.g. sunglasses / cash etc.).Inside the main compartment there is a separate compartment that offers space for documents or a laptop (up to 15"), for example. Dimensions Dimensions: Length 42cm, width 31cm, height 14cmVolume: 23 litersWeight: 2.15kg

A really beautiful, classic tank bag made from genuine suede Quality / Fastening / 2-1 tank bag & backpack This VERY high-quality tank bag focuses on the essentials for a tank bag paired with a very beautiful design. The tank bag is attached to the motorcycle in the classic way with 2 straps, guaranteeing a very secure and firm hold. The straps are fitted with a cover that makes it possible to conceal the metal straps.When removed from the motorcycle, the tank bag can also be used as a normal rucksack, which is particularly practical on tours or short trips. This gives you the option of not leaving your valuable belongings on the motorcycle when you are away from it. Water-repellent / care The backpack is made of thick / very high-quality canvas fabric. The fabric is lightly waxed and therefore slightly water-repellent (not waterproof). This can be reinforced with a waterproofing spray. Suitable waterproofing spray and wax (to care for the bag so that you can enjoy it for a long time) can be found under accessories in this product description. Material The Unit Garage tank bag (handmade in Italy) is made from 3mm thick, extremely high-quality genuine leather. The high-quality material guarantees that the backpack will last a lifetime if cared for properly. Storage space The tank bag has two pockets that are accessible from the outside and can be opened with a high-quality metal zipper. There is also a small additional pocket on the side where you can stow things that you need to have to hand quickly (e.g. sunglasses / cash etc.).Inside the main compartment there is a separate compartment that offers space for documents or a laptop (up to 15"), for example. Dimensions Dimensions: Length 42cm, width 31cm, height 14cmVolume: 23 litersWeight: 2.15kg

The Jetson tank cap made of cast aluminum in a flat design. We have been selling the custom cap fuel filler cap very successfully for years. Now there is also the completely black flat version, which has a slightly different design and is significantly flatter. The tank cap is supplied complete with thread and seal. This means it can be replaced one-to-one with the original without having to modify anything. The ribbing not only gives the cap a nice look, but also makes it very easy to grip. Motone also offers an oil filler cap in the same design as a matching accessory (can be found under accessories in this product description).

New from MotoIsm - the two-piece fork covers with integrated indicators. These innovative fork covers are very quick & easy to fit. Thanks to the two-part design of the covers, they can simply be slipped around the fork and fixed in place with the supplied cable ties (which are on the inside and not visible). The fork does not have to be removed, it couldn't be easier. The covers can be fitted in no time at all. LED SMD indicators with E-number are integrated in the covers. This kills two birds with one stone (inconspicuously mounted indicators that are still clearly visible from the front and a more attractive fork). The covers from MotoIsm (Made in Germany) are manufactured from high-quality, carbon fiber-reinforced plastic using a 3D printing process. MotoIsm produces the highest quality 3D-printed parts on the motorcycle market. The surface has a very nice & smooth feel. You will find suitable blinker plugs for simply plugging the indicators into the original wiring harness under Accessories in this product description.   No disassembly of the fork or upper triple clamp necessary Innovative, two-part SEAMLESS design  Ultra-bright thanks to LED technology - 5 SMDs With E-mark - Street legal Cable routing inside the cover Separating joint invisible from the side and front Special cable ties with particularly flat design are guided in the component High-quality paint finish in matt black Headlight brackets can be easily fitted to the covers

New from MotoIsm - the two-piece fork covers.These innovative fork covers are very quick & easy to fit. Thanks to the two-part design of the covers, they can simply be slipped around the fork and fixed in place with the supplied cable ties (which are on the inside and not visible). The fork does not have to be removed, it couldn't be easier. The covers can be fitted in no time at all. The covers from MotoIsm (Made in Germany) are manufactured from high-quality, carbon fiber-reinforced plastic using a 3D printing process. MotoIsm produces the highest quality 3D-printed parts on the motorcycle market. The surface has a very nice & smooth feel.   No disassembly of the fork or upper triple clamp necessary Innovative, two-piece SEAMLESS design  Cable routing inside the cover Separating joint invisible from the side and front Special cable ties with a particularly flat design are routed inside the component High-quality paint finish in matt black Headlight brackets can be easily fitted to the covers   Attention only fits on the Urban GS if the original lamp cover has been removed.

The Stripe LED headlight insert is a very attractive and simple insert that offers very good light output at a fair price! The simple and clear design fits perfectly with our Modern Classic motorcycles. The clear glass gives your motorcycle a slightly modern touch without attracting negative attention with an overly restless design. The light is a quantum leap compared to a conventional H4 halogen bulb! If you ride your motorcycle in the dark, you should invest some money in good lighting. On the one hand, you can see much better yourself because the road is properly illuminated, and on the other hand, you will also be seen better. We supply the headlight in such a way that it can be installed plug & play in the original headlight of your Triumph. A glass base adapter is also required for the connection. This can be found under accessories in this description.

The Navigator tank bag is a practical small backpack for short trips.The tank bag combines a practical cell phone compartment (with transparent film to use the cell phone for navigation) with a small, practical pocket in which you can store the essentials for a day trip (wallet/keys etc.). The navigator is held to the tank with 6 strong magnets, so there is no need to attach it (just the thing for a bag that you spontaneously take with you for a short trip). The bag is made of heavy canvas combined with leather: Waterproof zippers and heavily waxed materials ensure that the bag can withstand a downpour without getting wet on the inside (it probably can't withstand constant rain). Dimensions of the bag: 22 x 12.5 x 7.5 cm (large enough for an iPhone Max). In addition to being used as a tank bag, the bag can also be used as a belt bag or shoulder bag (with the supplied strap).This is very practical if you want to take your valuables with you when you are away from the bike for a while on tour.

The Alu Rear Fender Kit - Short Version is the second version of our proven Alu Rear Fender Kit. Absolute top quality at a fair price.The short version is significantly shorter, is slightly closer to the frame and has no fold on the sides. The kit thus looks less classic and fits especially well with scrambler & sporty conversions. Since almost no one likes the huge original traffic light system (tail light & turn signals), but many do not want to do without a fender, we came up with this kit. The fender is made of solid, high quality aluminum and is plug & play with brackets to screw on.In addition, the fender is already pre-drilled for the Eldorado taillight (you will find further down in the description to order) and also has a hole for the cable set (which you can also find below the description). Turn signal holder: Here are 4 different options to choose from. Where the variant with the turn signals inside the strut is not legal (but in our opinion looks the most beautiful).A turn signal holder set you can order below the description directly with it. License plate holder: Here you are again 4 versions to choose from. Central license plate holder: 1. "License plate holder - Eldorado taillight" the license plate sits on the taillight above the fender / 2. "License plate holder universal" the holder is attached below the fender to the screws for the taillight.Setiliche license plate holder: the rear kit can also be combined with a side license plate holder, which makes for a very clean and beautiful look in the rear area. Here we have one that goes on the swingarm and one that goes on the shock. Both are not approved. Other accessories: Cable set: This is needed in any case, if you do not want to cut anything off the original wiring harness. License plate screw set: Who wants to fix his license plate with matching colored screws, which can order a set with it. Reflector: Who wants to have a 100% legal rear, which must mount a reflector with. Raisch Alu Rear Fender Kit - Short 

This tank strap gives your Triumph a really rustic vintage look. The horizontal leather belt straps look more like a chic accessory that beautifully decorates the tank of your Triumph. Like a woman's chic handbag. The straps can be adjusted to fit any tank and you decide for yourself how tight the straps sit on your tank. If you don't just want the straps for visual reasons, but also want to use them practically for one or two small bags, you can also order the "Tank Bag" (can be found under accessories in this product description). The bag can be easily attached to the straps.

Classicbike-Raisch Shock mount license plate holder. The simple solution for mounting the license plate on the side of the shock absorber. A side-mounted license plate gives your Triumph a completely free / clean rear end. The stainless steel base holder is simply pushed behind the shock absorber over the spike and attached together with the shock absorber. Installation is very simple and can be completed in a short time (installation instructions are included). The license plate can be individually moved inwards and outwards using slotted holes in the base holder and 4 differently positioned holes in the license plate. If the license plate is pushed all the way out, the license plate holder can be registered individually. The scope of delivery includes LED license plate lighting and all necessary mounting materials. Tips for a complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard New Indicator brackets must also be fitted if the original mudguard is removed. The accessories described can all be found under the accessory items in this product description.

Your Triumph deserves the best protection - our underride guard in ripped design is the perfect balance between protection for your motorcycle and a classic design that makes your Triumph more beautiful. Made in Germany The engine guard protects the frame and the body of your motorcycle from rough stone chipping and if you ever hit the ground. But the guard also looks great. It skillfully closes the gap between the two frame struts. The gripped design looks beautifully classic. If you are primarily looking for the best possible protection for your motorcycle, we recommend our closed "Triumph underride guard" (see similar products in this description). Black / Silver: In the black version, the protection is supplied powder-coated In the silver version, the protection is supplied in raw aluminum (perfect for brushing or polishing) Why our underride guard: Unique ripped design High-quality aluminum for the best protection Stylish look that gives your motorcycle that little bit extra

Your Triumph deserves the best protection - our Triumph Triangula underride guard is the perfect balance between protection for your motorcycle and a classic design that makes your Triumph more beautiful. Made in Germany The engine guard protects the frame of your motorcycle from rough stone chips. It also protects against accidental impact. But the guard also looks great. It skillfully closes the gap between the two frame struts. The implied T and the Union Jack flag in the guard perfectly match our English Triumph bikes. Black / Silver: In the black version, the guard is supplied powder-coated In the silver version, the guard is supplied in raw aluminum (perfect for brushing or polishing) Why our underride guard: High-quality aluminum for the best protection Stylish look that gives your motorcycle that little bit extra All necessary mounting materials are included in the scope of delivery

Motone Triline handlebar end mirrors - WITH E-number - road legal. The new Triline aluminum handlebar end mirrors from Motone (England) are visually very beautiful, classic mirrors that perfectly match our classics.The Triline design paired with a matt, black anodized surface give the mirrors a very special look. The mirrors are not only a visual highlight, they are also technically top class. The Motone mirrors are the flattest mirrors with mirror glass known to us.The workmanship and the surface of the mirrors are also top class. The mirror glass used is highly scratch-resistant R1400 convex automotive glass. This has the advantage that a very large reflection angle is achieved (very good overall view to the rear). The mirrors are available in 2 sizes:- Size S (80mm diameter) WITHOUT E-number - Size M (100mm diameter) WITH E-number - road approval   Mounting options for the mirrors: - The mirrors are supplied with 2 different adapter rings so that the mirror can be clamped onto any handlebar with a 1" or 22mm diameter.If the mirror is clamped around a hollow accessory handlebar, we recommend the "Rizoma cap end weights" for a perfect finish (see accessory article in this description).- If you cannot clamp the mirror directly around the handlebars due to space problems, we recommend the "Handlebar extension - Motone", which can be installed in any hollow original handlebar. These then also serve as a clean handlebar end. Model specific mounting instructions with original handlebars: Water-cooled Triumph models - LC: The mirrors can be fitted plug & play to all original handlebars on Triumph LC models. To have a nice handlebar end we recommend the "Handlebar end caps Gemini" (see accessories in this description) Air-cooled Triumph models - AC:To mount the mirrors on the original handlebars, a handlebar extension is required. We recommend the "Handlebar extension - Motone". An M5 screw is also required (if you do not have this yourself, please contact us). You can find the handlebar extensions under the accessories in this description. BMW models:There is currently no solution for mounting the mirrors on the original handlebars.

Motone Turismo handlebar end mirrors - WITH E-number - road legal. The new Turismo aluminum handlebar end mirrors from Motone (England) are visually very beautiful & clean mirrors. The glossy black surface paired with the clean look provide a nice mix of modern design and a classic round shape. The mirrors are not only a visual highlight, they are also technically top class. The Motone mirrors are the flattest mirrors with mirror glass known to us.The workmanship and the surface of the mirrors are also top class. The mirror glass used is highly scratch-resistant R1400 convex automotive glass. This has the advantage that a very large reflection angle is achieved (very good overall view to the rear). The mirrors are available in 2 sizes:- Size S (80mm diameter) WITHOUT E-number - Size M (100mm diameter) WITH E-number - road approval   Mounting options for the mirrors: - The mirrors are supplied with 2 different adapter rings so that the mirror can be clamped onto any handlebar with a 1" or 22mm diameter.If the mirror is clamped around a hollow accessory handlebar, we recommend the "Rizoma cap end weights" for a perfect finish (see accessory article in this description).- If you cannot clamp the mirror directly around the handlebars due to space problems, we recommend the "Handlebar extension - Motone", which can be installed in any hollow original handlebar. These then also serve as a clean handlebar end. Model specific mounting instructions with original handlebars: Water-cooled Triumph models - LC: The mirrors can be fitted plug & play to all original handlebars on Triumph LC models. To have a nice handlebar end we recommend the "Handlebar end caps Gemini" (see accessories in this description) Air-cooled Triumph models - AC:To mount the mirrors on the original handlebars, a handlebar extension is required. We recommend the "Handlebar extension - Motone". An M5 screw is also required (if you do not have this yourself, please contact us). You can find the handlebar extensions under the accessories in this description. BMW models:There is currently no solution for mounting the mirrors on the original handlebars.

Genuine craftsmanship from Italy! The MUD leather bag system is the perfect combination of functionality, old school leather bag look & absolute high end quality / workmanship. The bags are handmade in Italy from very thick leather. A nice soft leather is used to get the casual hanging backpack look and to allow the height variable roll up closure.   Fastening system:The best thing about these bags is that they not only look good, but they also have a very good & practical fastening system.The bags have the SYS quick fastening system on the back. Thanks to this system, the bags can be attached to and removed from the motorcycle with a flick of the wrist and a click.In addition to the bags, a motorcycle model-specific SW-Motech Legend Gear SLC luggage holder is required (you can find this under accessories in this product description). Tip: If you already have a Legend Gear luggage system fitted to your motorcycle, you can simply replace your SW Motech bag with the MUD Bag.   Waterproof: The leather of the bags is properly oiled at the factory, making the bags water-repellent. In other words, if you get caught in a rain shower, the bags will easily remain waterproof. If you get caught in a really heavy downpour on a motorcycle tour, a waterproof rain cover is also included. Additional belt pouch:There is another small pocket on the front of the bag, this can also be removed if necessary and used as a belt pouch (very practical for storing expensive valuables, for example, that you don't want to leave on your motorcycle when visiting your favorite pub). Magnetic fasteners:Retro look paired with state-of-the-art magnetic fasteners! The Mud Bag uses classic leather straps with belt buckles as fasteners. However, because such fasteners are not exactly practical, a modern magnetic fastening system is hidden under the belt buckles. The system can be opened and closed in a single movement.The belt buckle therefore only serves as a fixed length adjustment for the leather strap. Roll up closure / variable size: To close the mud bag, it is rolled up at the top like a classic messenger bag. This looks cool and allows you to make the bag bigger and smaller if necessary. Thanks to the roll-up closure, the bag has a height of 35 to 45 cm. Extra strap: The bags are available with or without extra leather straps on the sides of the bag. With the bag with the extra straps you can attach things to the left and right of the bag, such as a water bottle, a camera tripod or other things. Inner lining:A bright orange fabric was carefully chosen as the inner lining to make it easy to find your things in the bag. The contrasting and bright color really makes it much easier to find individual items. The inner lining is also washable.   Size / Volume: Height: 35 - 45 cm Width: 33cmDepth: 17cmVolume: 20 - 25 liters

Triumph 3D sticker / lettering in New Generation design by Classicbike-Raisch. The lettering is 130 mm long and 15 mm high. The 3D style (sticker is raised and made of thick plastic) gives the sticker a particularly high-quality look. Perfect for e.g. tank or side cover.The sticker consists of individual letters that sit firmly on a transfer film. This makes the sticker very easy to apply. The lettering in black looks very good as a contrast on all other colors, as well as black on black on a black tank, for example. The stickers are sold individually (i.e. the price is for one sticker).

Ein Paar CNC gefräste Aluminium Verschlusskappen für Gabel deiner Triumph Modern Classic Maschine by Classicbike-Raisch.Die Milled Gabelkappen ersetzen die originalen, silbernen Kappen.  Die Kappen werden ganz einfach innerhalb weniger Minuten gegen die Originalen ausgetauscht. Zur Montage muss die Gabel nicht ausgebaut werden (sie muss nur entlastet werden, z.B. in dem das Motorrad aufgebockt wird, oder von einer zweiten Person über den Seitenständer hochgezogen wird) und es wird kein Spezialwerkzeug benötigt. Eine Montageanleitung gehört zum Lieferumfang dazu,  Die Milled Kappen werden in einer sehr edlen Black Pearl Oberfläche gefertigt. Das heißt, sie werden vor dem schwarz Eloxieren Glasperlen gestrahlt. Dadurch ergibt sich eine sehr feine, leicht matte Oberfläche die sich sehr hochwertig anfühlt und sehr edel aussieht.Im Nachgang werden dann noch die silbernen Akzente nachgefräst. Classicbike-Raisch Empfehlung: Bestellt euch noch das Plastik Werkzeug dazu, damit ist es ganz einfach die Milled Kappen ohne Kratzer und Macken zu montieren (siehe Zubehörartikel in dieser Beschreibung).Hinweis zu Bobber & Speedmaster mit 47mm Gabel: Um die originalen Gabelkappen dieser Modelle demontieren zu können, muss man die Gabelbrücke demontieren, da man sonst mit keinem Werkzeug auf die Gabelkappe ansetzen kann. Mit unserer spezial Kunststoffnuss kann man dies problemlos ohne die Demontage der Gabelbrücke. Das erspart Zeit und auch nicht jeder hat eine 36mm Nuss in seinem Werkzeugkasten  

This high-quality, completely black carpet from Triumph serves as a workshop carpet or simply as a base to make your beloved Triumph a little more comfortable. Of course, it also looks very nice if your bike has a nice place to stand and it stands on a black Triumph carpet. The carpet has an all-round rubber lip that protects the carpet from damage and fraying.

The Motogagdet mo.pressure tire pressure monitoring system is a very practical and also safety gadget for your motorcycle. The kit consists of two valve caps that connect via Bluetooth with your phone / the Motogadget app. The app then shows you the current tire pressure of your tires. In addition, you get a notification on your phone when the tire pressure falls below the specified control value. Who doesn't know it, you forget to check the tires for a few months and when you check them, you are shocked to see how low the tire pressure is. A significantly too low tire pressure is not only bad to drive, it is also dangerous.

Gebl clamps with integrated LED turn signals.These clamps are perfect for a custom conversion, where it can not find a good position to install conventional turn signals.The two-piece fork clamps must be simply put over the fork and fixed with two screws for installation. The wiring runs integrated in the clamp and provides a tidy and clean look. There are the clamps in 3 different dimensions (Please measure your fork standpipe and order the correct diameter measure), which you can choose in the selection. The turn signals have an E-mark and is approved as a front turn signal. The clamps from MotoIsm (Made in Germany) are made of a high quality carbon fiber reinforced plastic.   Classicbike-Raisch mounting tips & resistors: The company MotoIsm really makes an effort to make the connection of their indicators as simple and customer-friendly as possible.There are adapter cables from Motogadget with which you can connect their indicators directly to the wiring harness (without cutting/soldering plugs or similar). These adapter cables also have built-in resistors which ensure that your R9T has the correct flashing frequency. So there's no need for tedious trial and error. Our recommendation is to order one of these adapters at the same time! You can find the adapters under accessories in this product description.

2-2 stainless steel complete system in side pipe - hot rod design, suitable for all air-cooled Triumph Modern Classic models. This exhaust system gives your Triumph a completely new look with E-number & road approval.The Hot Rod system is a complete system & has optional catalytic converters installed in both pipes. The manifold pipes are significantly thicker than the original ones and look much more massive. The exhaust system also has an indifferent pipe (connecting pipe between the two pipes, which is very important for performance and torque). The original catalytic converter is replaced. The elimination of the rear silencer saves a lot of weight. The sound of the hot rod exhaust system is top class and something special. It is really crisp / throaty and gives the twin engine a unique sound thanks to its slim muffler shape. The exhaust system is supplied with removable DB killers. So if the exhaust is not loud enough for you, you can simply remove them. The system has a nice rich, muffled sound. The hot rod system is of very high quality and is handmade in Italy. Available with or without KAT: You can order the exhaust system with or without catalytic converters. No catalytic converter is required for the carburetor models (but can still be ordered if you prefer the bike to be a little quieter).A catalytic converter must be officially installed on the injection models. However, if you are looking for more sound and more power, we recommend ordering the version without catalytic converter.   Note on the product images:The images with a white background are sample images and may vary depending on the model. The air-cooled Triumph Modern Classic models, for example, do not have an indifferent pipe.

Classicbike-Raisch aluminum chain guard in the Short version - Made in Germany. The Short chain guard kits define a chain guard completely new. As minimalist as possible and running close to the chain, they provide a radical design and fulfill their most important purpose (not to get into the chain).In the chain guards is the design aspect absolute priority and not the splash protection (true to the motto: Who wants to be beautiful must suffer). A reasonably lubricated chain with modern, high-quality chain grease (such as the Motul Chain Lube) from our range but also do not splash much. In the kits, everything is included that is needed for assembly.Depending on the model, the scope of delivery still includes an additional chain guard fin, which is mounted in the middle of the swingarm to guarantee protection here as well. The Raisch chain guards are made of 3mm aluminum in Germany and then black powder coated.

Upgrade to LED with road approval for excellent visibility. This LED conversion kit from Phllips, turns your simple H4 headlight into a bright LED headlight with elegant white light. Of course, you can't expect the same effect from this as from a complete LED headlight insert. But you can convert your H4 headlamp to a much brighter LED headlamp for a mere penny and still keep the classic look (complete LED inserts are not for everyone).The LED bulb has an integrated resistor, which ensures that no error is displayed in the on-board computer. In addition, the bulb has a small fan on the back, which ensures that the bulb does not get too hot. With up to 230% brighter light than a conventional H4 bulb and a white beam similar to daylight, these LED bulbs illuminate everything clearly without dazzling oncoming drivers. The bulb has already been tested on a number of motorbikes and is approved for them (see here for the list of tested motorbikes: click on Download Bike List below the description).The Phillips LED bulb can also be installed on all other Triumph models without any problems. The customer must always download the approval via the QR code on the box and then carry it in or on the vehicle.

A pair of rubber knee pads in Union Jack style. The pads look very stylish and add a nice accent to the tank and protect the tank from scratches. The knee pads have double sided adhesive tape on the back for easy mounting. See drawing for dimensions.

A very stylish suede motorbike side bags handmade in Italy by Unit Garage.Available in two sizes: 10-14 litres / 22-30 litres. In the set together with a side pocket holder (can be ordered directly below the description) there is a 12,5% discount on the entire set!  The suede bags have a waxed surface (we recommend waxing & waterproofing the bags once a year, you can order the appropriate wax & spray below the description), which ensures that the bags are water-repellent. If you want to be on the safe side for tours and don't want to get your clothes wet in heavy rain, we recommend ordering a Unit Garage rain cover or Khali inner bag (can be ordered below). We use the highest quality leather available in Italy, 3mm thick. The Unit Garage bags do not only look cool, they are also extremely practical and good motorbike side bags. The bags have a quick release fastener on the back, which allows the bags to be attached to the Unit Garage side bag holder in one easy step (You can order the matching bag holder for your motorbike directly below the description in the set.). In addition, a lock is integrated into the quick-release fastener, which protects the bag against theft. The bags have a practical outside pocket for things that you need to access very quickly, and a shoulder strap for carrying the bag is also included. Details of the 10-14 litre bag: Dimensions: height 32 cm, extendable to 45 cm, width 24 cm depth 13 cm.Volume: 10-14 litresWeight: 2,2 kg This bag can hold a 15-16 inch laptop. Details of the 22-30 litre bag: Dimensions: height 35 cm, extendable in height up to 50 cm, width 32 cm, depth 20 cm.Volume: 22-30 litresWeight: 2,75 kgThe large version of the bag has a removable inner core, which ensures that the bag keeps its shape even when there are no contents in the bag.You can fit a jet helmet in the bag.

A very stylish canvas / cotton linen motorbike side bag handmade in Italy by Unit Garage.Available in two sizes: 10-14 litres / 22-30 litres. In the set together with a side pocket holder (can be ordered directly below the description) there is a 12,5% discount on the entire set!  The canvas bags have a waxed surface (we recommend re-waxing & waterproofing the bags once a year, you can order the appropriate wax & spray below the description), which ensures that the bags are water-repellent. If you want to be on the safe side for tours and don't want to get your clothes wet in heavy rain, we recommend ordering a Unit Garage rain cover or Khali inner bag (can be ordered below). The Unit Garage bags do not only look cool, they are also extremely practical and good motorbike side bags. The bags have a quick release fastener on the back, which makes it possible to attach the bags to the Unit Garage side bag holder with just one movement (You can order the matching bag holder for your motorbike directly below the description in the set.). In addition, a lock is integrated into the quick-release fastener, which protects the bag against theft. The bags have a practical outside pocket for things that you need to access very quickly, and a shoulder strap for carrying the bag is also included. Details of the 10-14 litre bag: Dimensions: height 32 cm, extendable to 45 cm, width 24 cm depth 13 cm.Volume: 10-14 litresWeight: 1,45 kg This bag is big enough to hold a 15-16 inch laptop. Details of the 22-30 litre bag: Dimensions: height 35 cm, extendable in height up to 50 cm, width 32 cm, depth 20 cm.Volume: 22-30 litresWeight: 1,90 kgThe large version of the bag has a removable inner core, which ensures that the bag keeps its shape even when there are no contents in the bag.You can get a jet helmet inside the bag.

Modern unit garage TPU plastic side bag that is 100% waterproof.20-26 litre capacity.Equipped with the Unit Garage quick release fastener on the back of the bag, it is attached to the Unit Garage side bag holders. In a set together with a side bag holder (can be ordered directly below the description) there is a 15% discount on the whole set! The Unit Garage bags not only look cool, they are also extremely practical and good motorbike side bags. The bags have a quick-release fastener on the back, which makes it possible to attach the bags to the Unit Garage side bag holder with just one movement (you can order the matching bag holder for your motorbike below the description in the set).In addition, a lock is integrated into the quick-release fastener, which protects the bag against theft. The bags have a practical outside pocket (accessible via a waterproof zip) for things that you need to access very quickly, and a shoulder strap for carrying the bag is also included. Materials: High frequency heat sealed TPU with Hypalon surfaces.- TPU is the latest generation material that makes PVC obsolete. It is a composite material with excellent elasticity & wear resistance.- TPU is a highly technological, durable material with excellent waterproofing properties that is resistant to weathering, chemicals and UV rays. - Roll-up closure that guarantees waterproofness.- Magnetic buckles (quick release)- Reflective inserts for better visibility- Straps with Velcro fastening to secure the excess part- Rigid reinforced back to keep the bag in shape- Shoulder strap and handle included Dimensions: Height 38 cm, extendable in height up to 48 cm, width 30 cm, depth 18 cm.Volume: 22-26 litresWeight: 1,25kg

Attention! When ordering in the comments please specify for what a motorcycle and what year of manufacture the set should be. Only for models up to 2014 from 2015 other chains were installed (for this please contact us personally). BlackLine 525 chain set. For those who want it nice and black and inconspicuous, the black DID chain is just the thing. Black plates with silver rollers.The chain kit comes with a rivet lock.The kit also includes a chainring (either a black steel chainring or a Stealth chainring in gold/black) and a sprocket. A bit further down in the description, you have to pack your desired gears to the set. We recommend you to choose a shorter gear ratio than the original one from Triumph (this is simply much too long for the engine power). We advise a 18 / 45 or even 17 / 45 gear ratio. Factory gear ratio:790cc engines: 17 / 43865cc engines: 18 / 43 Tip:- We recommend for safety a new sprocket lock plate with the chain set to order (see accessories article in this description).- In addition, you will find in the accessories still beautiful, black chainring nuts for all who want to have it completely black. About the DID chain: As the successor to the proven high-performance chain ZVM2, special attention was paid during the development of the ZVM-X to the diverse loads that occur in everyday life. The tensile strength only indicates the breaking load of a chain determined statically in the laboratory, but not the resistance to the forces that occur in practice. For this reason, the ZVM-X focuses primarily on strength in use. -increased tensile strength and-lower weight compared to the ZVM2-very high wear resistance and up to 50% reduced friction losses due to the patented X-ring technology.

A PAIR Pico aluminum LED turn signals from the brand Motone from England. With E-number & road approval. The very high quality Motone turn signals are made of a full metal housing and have an Osram SMD LED insert. The Pico turn signals are the only turn signals in our range, where the cables are sheathed with a fabric hose and also have a sleeve included with which the nut / thread is covered. This is visually and haptically really nice! The turn signals have an M8 thread & have a 3.9mm Japan plug at the cable ends. Under the accessories in this description you will find model specific turn signal plugs for your motorcycle. The Pico turn signals have a classic bullet design and are the absolute perfect size for our Modern Classic bikes. They are nice and small, but not too tiny. Dimensions: W 18 x H 44 x D 25.5 mm

Timing belt drive kit for the air cooled Triumph Modern Classic models. The timing belt drive is primarily to reduce the loss of power from the transmission output to the rear wheel. It also makes the usual chain maintenance a thing of the past. No more chain tensioning, no more chain lubrication, and most importantly, no more chain grease/dirt removal from the bike. The gear ratio of your motorcycle remains the same after the conversion. Attention: The kit is not a very easy to install plug & play kit. Please have a look at the assembly instructions before buying (you can find them under downloads in the product description).The original chain guard and the sprocket cover can not be used. A matching belt guard and sprocket cover, you will find under the accessories in this description. Model specific descriptions: Bonneville - pulley: 65 teeth / sprocket: 27 teeth / belt: 130 teeth Thruxton / Scrambler - Pulley: 65 teeth / Pinion: 27 teeth / Belt: 132 teeth Speedmaster / America - pulley: 65 teeth / sprocket: 27 teeth / belt: 140 teeth   Classicbike-Raisch tip: We recommend ordering the matching adjuster for perfect belt tension adjustment (see accessories in this product description)

Triumph Milled Bremsbehälter Abdeckung by Classicbike-Raisch. CNC gefräste Aluminium Ausgleichsbehälter Abdeckungen für alle Triumph Modern Classic Modelle mit 1 Zoll Lenker. Die Deckel werden im 3D Fräsverfahren in Deutschland hergestellt. Im Nachgang werden sie Glasperlen gestrahlt und schwarz eloxiert. Dadurch bekommt man eine unglaublich wertige, raue Oberfläche, die auch perfekt zu den original Armaturen der Triumph Modelle passt.Außerdem hat das den Vorteil, dass die Oberfläche einen noch tieferen Schwarzton bekommt und diesen auch noch nach vielen Jahren hat. Das angedeutete T Logo mit integrierter Union Jack Flagge lässt dich beim Fahren daran erinnern, dass du eine Triumph, ein Englischer Klassiker mit Tradition fährst. Die Ausgleichsbehälter Abdeckungen werden ganz einfach gegen die originalen ausgetauscht, was in wenigen Minuten erledigt ist.   Optional könnt ihr euch noch schwarze Schrauben dazu bestellen, diese findet ihr unter den Zubehörartikeln in dieser Produktbeschreibung.