Raisch Alu Rear Fender Kit - Short

Product information "Raisch Alu Rear Fender Kit - Short "

The Alu Rear Fender Kit - Short Version is the second version of our proven Alu Rear Fender Kit. Absolute top quality at a fair price.
The short version is significantly shorter, is slightly closer to the frame and has no fold on the sides. The kit thus looks less classic and fits especially well with scrambler & sporty conversions.

Since almost no one likes the huge original traffic light system (tail light & turn signals), but many do not want to do without a fender, we came up with this kit. The fender is made of solid, high quality aluminum and is plug & play with brackets to screw on.
In addition, the fender is already pre-drilled for the Eldorado taillight (you will find further down in the description to order) and also has a hole for the cable set (which you can also find below the description).

Turn signal holder: Here are 4 different options to choose from. Where the variant with the turn signals inside the strut is not legal (but in our opinion looks the most beautiful).
A turn signal holder set you can order below the description directly with it.

License plate holder: Here you are again 4 versions to choose from.
Central license plate holder: 1. "License plate holder - Eldorado taillight" the license plate sits on the taillight above the fender / 2. "License plate holder universal" the holder is attached below the fender to the screws for the taillight.
Setiliche license plate holder: the rear kit can also be combined with a side license plate holder, which makes for a very clean and beautiful look in the rear area. Here we have one that goes on the swingarm and one that goes on the shock. Both are not approved.

Other accessories:

  • Cable set: This is needed in any case, if you do not want to cut anything off the original wiring harness.
  • License plate screw set: Who wants to fix his license plate with matching colored screws, which can order a set with it.
  • Reflector: Who wants to have a 100% legal rear, which must mount a reflector with.


Raisch Alu Rear Fender Kit - Short 

Triumph LC models from 2016:
  • Bonneville T100
  • Bonneville T120
  • Street Cup
  • Street Scrambler
  • Street Twin
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Thruxton 900 EFI
Thruxton Vergaser
10
10
10
10

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Choose from the following articles in the article group: Blinker Halter - AC optional
Indocator holder universald
Indocator holder universald
Design: 8er

Available, delivery time: 1-3 days

€21.95*

Turn signal holder shock inside
Turn signal holder shock inside
Design: 8er

Available, delivery time: 1-3 days

€16.90*

Blinking of seat bench
Blinking of seat bench

Available, delivery time: 1-3 days

€19.90*

Indicatorbrackets shocks ripped silver / polished
Indicatorbrackets shocks ripped silver / polished

Available, delivery time: 1-3 days

€44.95*

Turn signal holder Motone for KZ holder
Turn signal holder Motone for KZ holder

Available, delivery time: 1-3 days

€25.95*

Choose from the following articles in the article group: Kennzeichen Halter Raisch Rear Fender - AC optional
License plate holder - Eldorado taillight
License plate holder - Eldorado taillight

Available, delivery time: 1-3 days

€22.95*

Universal license plate holder
Universal license plate holder

Available, delivery time: 1-3 days

€34.95*

License plate holder - Shock AC
License plate holder - Shock AC

Available, delivery time: 1-3 days

€99.95*

Sideway licens plate support Swingarm AC
Sideway licens plate support Swingarm AC

Available, delivery time: 1-3 days

€104.95*

Choose from the following articles in the article group: Rücklicht / Tail Light optional
Tail Light Bates Style
Tail Light Bates Style

Available, delivery time: 1-3 days

€36.95*

Eldorado LED Alu taillight
Eldorado LED Alu taillight

Available, delivery time: 1-3 days

€99.95*

Rizoma Cafe Racer LED taillight
Rizoma Cafe Racer LED taillight

Available, delivery time: 1-3 days

€82.00*

Choose from the following articles in the article group: Zubehör Raisch Rear Fender - AC optional
License plate screw set
License plate screw set

Available, delivery time: 1-3 days

€8.90*

Reflector
Reflector

Available, delivery time: 1-3 days

€10.90*

Cable kit Raisch for accessories taillight & turn signal
Cable kit Raisch for accessories taillight & turn signal

Available, delivery time: 1-3 days

€32.95*

Total bundle price for current configuration

€234.95 .... *

Zubehörartikel

LED Turn signals Old Style CB00113 / RS600
LED Blinker OS Style Pair. Alu housing black. 20mm housing. Stitch length 20mm. Decent unexpected look. Not too small and not too big. Just matching our classic twins. Super bright !!

€49.95*
Drops Alu Turn Signals CB11076.2M / RS600
This is quality. The highest quality indicators we have ever seen. Beautiful, drop-shaped indicators in just the right size for the style; not too small and not too big. The turn signal housing is completely machined from aluminum (diameter 42 mm, length 66 mm). The blinker arm & threads are made of stainless steel for even more durability. The indicators are supplied with two different blinker lenses (see photo), which can be easily replaced. Indicators are with E-number. Price is for one pair. Matching blinker plugs for connection to the original wiring harness can be found under accessories in the description here. There are also blinker holders for mounting on the standpipes (see also accessories). Does not work Plug&Play on motorcycles that are factory-fitted with LED indicators and where the indicator frequency cannot be changed on the vehicle. Note / tip: Accessory indicators are always supplied by the manufacturers with a universal plug or without a plug at all. If you simply want to connect the indicators to the original wiring harness of your motorcycle, you can also order the appropriate blinker plugs for your motorcycle (you will find the plugs under the accessory items in this description).

From €99.95*
Rizoma LEGGERA Indicators CB11274.2M / RS0
Rizoma "LEGGERA" Mini Blinker made of billet aluminum in top quality. Minimalist blinkers for anyone who wants to have them as inconspicuous as possible, but do not want to forego safety and a noble workmanship. The turn signals are very bright thanks to modern LED technology. The turn signals are with E-number. The price is for a single turn signal. Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals. If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description). The indicators are sold individually.

From €86.00*
License plate screw set CB11444 / RS0
These screws are powder coated in the matching colors (white / blue / black) for the license plate. We have our stainless steel screws powdered in Germany. This allows us to guarantee a high quality. The tool still fits, even the color does not burst. Delivery: 1x screw M5x20 blue 2x screw M5x20 black 3x screw M5x20 white 4x self-locking nut M5 4x washer M5 DIN9021 The advantages of powder-coated screws: - Mechanically resilient - Corrosion resistant - Weather resistant - Environmentally friendly

€8.90*
Blinker LC Indicator side CB11072 / RS-20
The matching flasher in the set (4 pieces for a pair of turn signals) in order not to cut the original wiring harness. These plugs are crimped onto the cables of the turn signals and can then be easily and quickly plugged on the cable harness side.

€8.90*
Rizoma IRIDE Indicators CB11270.3 / RS0
Colour: Chrome | Design: With Postion Light
Beautiful classic turn signals from Billet aluminum from Rizoma in all top top quality. The turn signals are very bright thanks to modern LED technology. The turn signals are with E-number. The price is for a single turn signal. Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals. If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description). The indicators are sold individually.

Variants from €72.00*
€92.00*
Rizoma CLUB Indicators CB11272M / RS0
Rizoma "CLUB" Mini turn signals made of billet aluminium in highest top quality. This is what we modern classic fans want! Modern small turn signals in a classic round design.The turn signals shine very brightly by modern LED technology and are seen so despite their small size very well.The turn signals are E-numbered and therefore road legal. The price is for a single turn signal.Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.The turn signals are optionally available with white position light (only for front!) or without. The indicators are sold individually.A resistor is included in the scope of delivery.

From €82.00*

Total bundle price for current configuration

€234.95 .... *