Sideway licens plate support Swingarm LC

Product information "Sideway licens plate support Swingarm LC"

Side license plate holder including LED license plate light.
Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.
Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases.

Without expert opinion. From our experience, however, there are no problems with the green ones.

Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm

 

Tips for complete rear conversion:
In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed!
We offer you two options for this.
Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)
Option 2: You install a shorter & narrower aluminum mudguard

New blinker brackets must also be fitted if the original mudguard is removed.

The accessories described can all be found under accessories in this product description.

Triumph LC models from 2016:
  • Bobber
  • Bobber Black
  • Bonneville T100
  • Bonneville T120
  • Scrambler 1200 XC
  • Scrambler 1200 XE
  • Speed Twin - 1200
  • Speedmaster
  • Street Cup
  • Street Scrambler
  • Street Twin
  • Thruxton 1200
  • Thruxton 1200 R
  • Thruxton 1200 RS
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
1
1
1
1

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Turn signal holder shock inside CB11675M / RS600
Turn signal holder for relocating the turn signals to the inner ladder of the suspension strut mount (inside of the frame). With matching screws for mounting the holders. The holders are black powder-coated. The optimal laying to install the turn signals as inconspicuous as possible. There are the turn signal holder optionally with 8er as well as 10er hole. This refers to the thread size of the turn signals. Most accessories turn signals have an 8er thread. The turn signals from our range with conventional halogen bulbs (such as the Drops or Arizona turn signals) still have a 10er thread.

From €16.90*
Razor Bobber Hinterrad Kotflügel - Short CB12421 / RS0
The Razor short steel fender is the shortest rear fender available for the Triumph Bobber models. The fender comes ready painted in gloss black. The fender is suitable for all Bobber models. The perfect fender for anyone who would prefer to ride without a fender at all, but because of the splash protection does not want to do without it. The Razor is just long enough to protect the airbox / electronics box of the motorcycle, but visually protrudes only minimally above the swingarm. Classicbike-Raisch recommends when converting to the short fender, 3-1 taillight / turn signal to install as well as a side license plate holder. You will find suitable turn signal holders and license plate holders under the accessories in this description. The fender is supplied plug & play with all mounts (also for the chain guard) for the original mounts.

€289.95*
Wiring harness accessories taillight & turn signal - LC CB11222M / RS600
This cable set fits into the original wiring harness with the plug. The open cable ends only need to be connected with blinkers or rear lights from our program (soldering or crimping). Then just heat the shrink tube, heat it up with the lighter, and the professional electrical connection is ready.

From €31.95*
Tail Underplate LC CB12235M / RS999
This black powder-coated aluminum lower shell replaces the original fender and ensures that the rear area remains closed after the removal of the original fender. This is notwenidg, so that in the rear of everything splashes, so that the rear continues to look reasonable and so that the electronics are not simply exposed. Makes sense, for example, if you want to convert your motorcycle to a side Kennzeiechenhalter and build the original fender away.

From €59.95*
Rear fender Shorty - Bobber CB12621.3 / RS600
Colour: Carbon
Shorty mudguard for Triumph Bobber. The classic among the short fenders for the Triumph Bobber. As the sides of this fender enclose the tire, it has a more classic look, blends in perfectly with the original vehicle line and underlines a classic chopper style. A clear view of the rear wheel combined with a harmonious overall look. If you are out and about in the rain, it will of course only protect you from splash water to a limited extent. However, it does protect the shock absorber, airbox and various cables and relays, which are positioned directly in front of the rear wheel, from dirt, grime and stone chips. It is therefore more suitable for those of you who want to give your bobber a more minimalist line without taking away its classic look. Because without a mudguard, it usually looks a bit strange. The bracket system allows individual positioning of the mudguard: The distance between the fender and the tire is adjustable, so you can adjust this precisely to the chain setting. Even when using different tire types, it is possible to adjust the height of the mudguard optimally. Note, however, that a tire expands at high speeds. A distance of at least 7 mm should therefore be set. For an even more minimalist look, the mounting point for the original chain guard can be removed. You can remove this if you want to fit a short chain guard. Like all KRT parts, this mudguard is also manufactured by us. From the prototype to the mold production to the finished carbon part, all work steps are carried out in-house. The mudguards are manufactured using the RTM process, whereby the carbon fiber is impregnated with resin under vacuum and heat. This process enables extremely light and precisely fitting components. The fibers and resins used for production meet current aviation standards and are also used in the construction of rotor blades. Versions and their surfaces: The mudguard is available in a visible carbon version, for which we use a carbon canvas fabric that is also used by Ducati and Porsche. On request, owners of a Bobber TFC can obtain a special version in which we use a twill weave. The matt finish visually matches the original carbon parts of the TFC. However, as the TFC is limited, this part is only produced on request. We also offer two ready-painted versions: one in gloss black and one in matt black. Both match the original colors. For those looking for individual color options, an unpainted RAW version is available. This is primed and optimally prepared for an individual paint job by your painter.   Matching accessories: To build a complete rear kit around the short mudguard, other accessories such as license plate holder, indicators / rear light, possibly a short chain guard are required. You can find our product recommendations for the short mudguard under the accessories in this product description.

Variants from €289.00*
€419.00*
Turn signal relocation seat LC CB11087M / RS600
Turn signal relocation seat. These turn signal holders are bolted to the rear frame of your Triumph and then come a piece under the seat. Suitable screws for mounting, are included. The mounting plates have an 8 hole, in which you can attach most accessory turn signals. The plates are made of aluminum and black satin powder coated.

From €19.90*