Razor Bobber Hinterrad Kotflügel - Short

Product information "Razor Bobber Hinterrad Kotflügel - Short"

The Razor short steel fender is the shortest rear fender available for the Triumph Bobber models. The fender comes ready painted in gloss black.

The fender is suitable for all Bobber models.
The perfect fender for anyone who would prefer to ride without a fender at all, but because of the splash protection does not want to do without it. The Razor is just long enough to protect the airbox / electronics box of the motorcycle, but visually protrudes only minimally above the swingarm.

Classicbike-Raisch recommends when converting to the short fender, 3-1 taillight / turn signal to install as well as a side license plate holder. You will find suitable turn signal holders and license plate holders under the accessories in this description.

The fender is supplied plug & play with all mounts (also for the chain guard) for the original mounts.

Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Licensplate Holder site ways CNC CB11182M / RS2
This is how it should look on a real bobber! On a bobber, the license plate simply belongs on the side and not on the fender. The side license plate holder from Wunderkind also fits the Triumph Bonneville T100 / T120 - Street Twin / Scrambler / Cup - Scrambler 900 - Speed Twin 900 The holder is very elegantly CNC-milled and black anodized. There is an optional holder for all those who want to continue using the original rear light of their Bobber & a reflector fits on the Kz holder (see accessories in this description). Details at a glance+ Laterally mountable license plate holder+ 3-stage width adjustment of the plate (towards or away from the wheel) + Possibility to tilt the plate by 30+ Integrated LED lighting + License plate can be inserted into the frame from above + Concealed cable routing + Surface finish with BLACKPearl anodized + CNC-milled aluminium+ Design: WUNDERKIND-Custom The bracket is supplied with a parts certificate for the Triumph Bobber & Speedmaster.For all other models (Bonneville / Street / Scrambler / Speed) it must be registered individually (which is not a problem due to the existing parts certificate).ATTENTION for Bonneville models: On these models, the NCIHT holder fits together with the original exhaust. The license plate is optionally available for German (standard and 200x220 size), Austrian, Swiss and French license plates.

From €349.00*
Side mount License support Rear Tire CB12107M / RS2
This side license plate holder is mounted on the left side of the swingarm of your machine. The license plate then sits behind the rear wheel (a registration at the TÜV is not necessary).As well as all parts that come from the house KRT Framework, the side license plate holder is of the highest quality and absolutely perfectly thought out. The license plate holder is welded together from bent tubes as well as laser cut parts. The license plate is then mounted on the high-quality anodized license plate holder plate.Visually just cool as well as on a bobber or a sporty Thruxton / Speed Twin to get a clean rear. Included are all mounting materials and a small LED license plate light (with E-number). The cables are routed through one of the two tubes so that they are not visible. If you want to mount your turn signals directly on the license plate (as well as on the blue Speed Twin on the pictures), you can order a set of "turn signal holder KRT" in addition (see accessory article in this description). If you want to be 100% legal on the road, it is also necessary to have a reflector on the bike. A directly suitable for the license plate holder is also available from KRT (see accessories article in this description). Note to Thruxton & Speed Twin: Who wants to install the side license plate holder and dismantle the fender, which can still order the bottom shell from our range. You can find this under the accessories in this description. The license plate is available for different countries in different sizes. Dimensions of the license plate for the different countries: Germany: 180 x 200 mmSwitzerland: 180 x 140 mmAustria: 210 x 170 mmFrance: 210 x 130 mmNetherlands: 210 x 140 mmBelgium: 210 x 140 mmItaly: 177x177 mmSpain: 220x160 mmUSA: 178x102 mm

From €229.00*
Indicator Brackets Bobber Frame CB12172 / RS3
The turn signal holder Frame for Bobber & Bobber Black allow the mounting of all turn signals with M8 thread on the inside of the frame on your Bobber. Visually, the turn signals are here as good as no longer noticeable, if you use nice small. From behind they are nevertheless very well visible, since they are higher than the rear wheel & the fender. In the pictures 3-1 turn signals are installed which combine tail light, brake light & turn signal in one. We then did not install a central tail light on the Bobber. This makes for an extremely tidy tail. Included with, are 2 black plastic caps that are pushed over the nuts of the turn signals so that they do not stand out. The holders are made of aluminum and then black powder coated.

€19.90*
Sideway licens plate support Swingarm LC CB11838 / RS1
Side license plate holder including LED license plate light.Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases. Without expert opinion. From our experience, however, there are no problems with the green ones. Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm   Tips for complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard New blinker brackets must also be fitted if the original mudguard is removed. The accessories described can all be found under accessories in this product description.

€114.95*
Side Mount Lizenz support Bobber / Speedmaster CB12108M / RS2
Three-piece licence plate holder made of 3mm aluminium or stainless steel for Triumph Bobber / Bobber Black & Speedmaster 1200, from our friend KRT Framework.Like all parts made by KRT, the side licence plate holder is of the highest quality and perfectly thought out. The scope of delivery includes all mounting materials as well as a number plate light. The two aluminium support plates make it possible to mount the unit without screws or cables. Long holes paired with three different hole patterns allow mounting in your desired position (side and height are adjustable). The licence plate holder is available with different plates for the countries (Germany, Austria, Switzerland, France, Netherlands, Belgium. Please choose in the selection) Dimensions of the license plates for the different countries: Germany: 180 x 200 mmSwitzerland: 180 x 140 mmAustria: 210 x 170 mmFrance: 210 x 130 mmNetherlands: 210 x 140 mmBelgium: 210 x 140 mmItaly: 177x177 mmSpain: 220x160 mmUSA: 178x102 mm

From €199.00*
Bobber - Short Steel Front Fender CB12537 / RS0
This short steel fender replaces the original fender, which is significantly longer.Unlike the short fender from the Triumph accessories, the Motone fender has no bead in the middle, which is visually much better to the short rear fender conversions, which also have no bead (matching rear fenders can be found under the accessories products in this description). The fender is made of sturdy steel, which, as with the original fender, further ensures the stiffening between the fork legs. The fender is supplied in glossy black.

€269.95*