Original parts black powder coating

P5110235Ndfx43nQry7P4

Painting the injection bar black CB12538 / 0

You just want to have everything black on your Triumph? Then the injector battery must also be black! Unfortunately, this is not as easy as with most other parts. Due to seals / nozzles etc. you can not powder coat the bar. Therefore, we resort to a high quality primer + silk matt black paint. Before everything is meticulously taped to be able to ensure proper function. To the unwinding: You send us your dismantled injection system and we take care of everything else. It takes about 4-6 weeks until you get the black painted injection bar back from us. Attention the two front covers and the 4 covers (two upper and lower) are not part of the painting. These parts can be additionally coated by us. You can find these services under the accessories in this description.

€495.00*

Crash bar black coating CB12479 / 50

True to the motto black is beautiful, you can send us all the metal parts of your motorcycle so that we coat them black.You do not like the silver of your engine guards crash bars? Then send them to us and we coat them in black. We will then coat the part in black satin (RAL9005). The processing time is approximately 2 - 4 weeks. Attention! We offer here only the service of the coating. The original part must be delivered to us by the customer.

€65.00*

Front Mudguard Powder coating black CB12197 / 50

You have an aluminum fender and you don't like the silver anymore? Then send it to us and get it back in black. The part will be powder coated by us in black satin (RAL9005). The processing time is about 2-3 weeks. Attention! we only offer the service of coating here. The original part must be delivered to us by the customer.

€65.00*

Exhaust Heat Shield Powder coating black CB12198 / 50

You would like the original rear exhaust heat shield of your Scrambler in black? Then just send it to us and we will coat it black satin (RAL9005) powder. The processing time is about 2-3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€60.00*

Rear Mudguard Powder coating black CB12199 / 50

You have an aluminum fender on your machine and you don't like the silver anymore? Then send it to us and get it back in black. The part will be powder coated by us in black satin (RAL9005). The processing time is about 2-3 weeks. Attention! we only offer the service of coating here. The original part must be delivered to us by the customer.

€75.00*

Sump Guard Powder coating black CB12200 / 50

True to the motto black is beautiful, you can send us all the metal parts of your motorcycle so that we coat them black.You do not like the silver of the original engine guard on your Scrambler 1200? Then send it to us and we will take care of the coating. The part is then coated by us in black satin (RAL9005). The processing time is about 2-3 weeks. Attention! We only offer the service of coating here. The original part must be delivered to us by the customer.

€70.00*

Tank Belt Powder coating black CB12201 / 50

Everything should be black? Then send us your original aluminum tank belt including the buckle and we will take care of the coating. The parts will then be coated black satin (RAL9005) powder. The processing time is about 2-3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€50.00*

Side Cover Badges Scrambler Powder coating black

Side Cover Badges Scrambler Powder coating black CB12203 / 50

The two aluminum plates on the left side cover of your Scrambler 1200 are too conspicuous. Then just send them to us and we will coat it black satin (RAL9005) powder. The processing time is about 2-3 weeks. Attention! we offer here only the service of coating. The original part must be delivered to us by the customer.

€55.00*

Injection Covers Powder coating black CB12204 / 50

You would like to have the original, silver Injection plates of your Motrrades in black? Then just send it to us and we will coat it black satin (RAL9005) powder. The processing time is about 2-3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€35.00*

Headlight Brackets Powder coating black CB12206 / 50

You would like to have the original Headlight holders of your bike in black? Then just send them to us and we will coat it black satin (RAL9005) powder. The processing time is about 2-3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€65.00*

Handguards Scrambler 1200 Powder coating black

Handguards Scrambler 1200 Powder coating black CB12207 / 50

You want to have the metal struts of your Scrambler 1200 like in black? Then just send them to us and we will coat it black satin (RAL9005) powder. The processing time is about 2-3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€70.00*

Side Stand black Powder coating CB12208 / 50

Black Black Black! Not all side stands are black from the factory. If you make all the parts on the bike black, the stand also stands out negatively in silver. We can also coat it black for you. For this simply send us your side stand and we will coat this black satin (RAL9005) powder. The processing time is about 2-3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€60.00*

Footrests black Powder coating CB12211 / 50

You like the original Rasten your mr machine very well, because they are actually pretty cool (such as the Scrambler 1200), but they do not like you in silver? Then just send them to us and we will powder coat it black satin (RAL9005). The price is for ONE PAIR of rests. Please remove all attachments like rubbers or similar from the footrests and do NOT send them to us! Please note that the coating in the area where the foot rests will wear off over time. The processing time is approximately 2-3 weeks. Attention! we offer here only the service of the coating. The original part must be delivered to us by the customer.

€60.00*

Coating injection strips cover black CB12275 / 50

They like the original injector covers very much, but you would like them in black? Then just send them to us and we will powder coat it black satin (RAL9005). The processing time is about 3-4 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€35.00*

Exhaust catalytic converter cover black coating CB12312 / 50

You would like to have the original catalytic converter heat shield of your Scrambler in black? Then just send it to us and we will powder coat it black satin (RAL9005). The processing time is about 2 - 4 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€60.00*

Radiator grille black coating CB12320 / 52

True to the motto black is beautiful, you can send us all the metal parts of your motorcycle so that we coat them black for you.You do not like the silver of the Triumph accessories radiator grille on your Scrambler 1200? Then send it to us and we will take care of the coating. The part will then be sandblasted by us and coated in black satin (RAL9005). The processing time is about 3 - 4 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€60.00*

Crash bar black coating CB12425 / 50

€85.00*

Exhaust cat cover black coating CB12426 / 50

True to the motto black is beautiful, you can send us all the metal parts of your motorcycle, so that we coat them black.You would like to have your original cat screen in black? then just send it to us and we take care of everything! The part will then be coated by us in black satin (RAL9005). The processing time is about 2 - 4 weeks. Attention! We offer here only the service of the coating. The original part must be delivered to us by the customer.

€60.00*

Battery box belt Bobber black coating CB12194 / 601

You don't like the flashy silver aluminum belt on the black battery box of your Bobber? Then you can order this item here and send us the belt. We will then coat it in black satin powder and send it back to you.Please send only the two belts, without screws, sleeve, etc. (the two parts that are visible in the photo are black). For the coating we need about 2-3 weeks. ATTENTION with this article it concerns only the service of your original belts, which must be sent to us.

€35.00*

Injection LC black powder coating CB12009M / 0

Black is beautiful! True to this motto we offer you the possibility to send us almost all metallic parts of your machine and we will coat them in black silk matt and send them back to you. This is also possible with the upper & lower covers of the injection bar. You just send them to us, we press down the brass ring, blast the parts, tape the clamping area under the brass ring and press the ring back on after coating (if you wish, the ring can be coated as well, please contact us. But the contrast looks really cool!) We can also make the brass ring black for an additional charge. Delivery time approx. 2-3 weeks.

€85.00*

Details

Shift lever black coating CB12038 / 0

Black is beautiful! True to this motto, we offer you the opportunity to send us almost all metal parts of your machine to us and we powder coat them in black satin and send them back to you. Just send us the dismantled gearshift and we will take care of everything else. If you have a shift lever with rubber or screwed accessories shift pin (which should not be coated), please mount this before. Delivery time is about 2-3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€55.00*

Break lever black coating CB12039 / 600

Black is beautiful! True to this motto, we offer you the possibility of virtually all metal attachments of your machine to send to us and we powder coat them to you in black satin and send them back to you. Simply send us the dismantled brake lever and we will take care of everything else. Delivery time is about 2-3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€45.00*

Swing Arm black powder coating CB11960 / 0

Black is beautiful! The original swingarm has a rather unsightly die-cast surface look, which doesn't look very noble! It is also silver.To give the swingarm a nice & smooth surface in black, we also offer powder coating in black (RAL9005).The price is valid for a dismantled swingarm, which is delivered to us. We press out the bearings with a special tool. After the coating we press everything in again professionally and renew a seal in the swingarm (our work for this takes about 2 hours, hence the high price).It takes about 2 - 6 weeks until you have the part back.

€280.00*

Fork bridges Thruxton 1200 black powder coating

Fork bridges Thruxton 1200 black powder coating CB11961 / 0

BLACK BLACK BLACK.The Thruxton 1200 R / RS & TFC have a really nice polished upper triple clamp, but not many people like that. If you like to have your triple tree (top & bottom) powder coated in black, you can send us your finished triple tree. We take care of the disassembly of the bearing, masking etc. and then coat them black (RAL9005)To be made black: upper & lower triple clamp.It will take you about 2 - 3 weeks to get the part back.

€150.00*

Sprocket Cover black powder coating CB11962 / 0

If you don't like the original silver on your sprocket cover, you can send us your cover and we will coat it in black (RAL9005).Attention! Only possible for models which have a metal RItzelcover, not possible for plastic parts.Duration until you get the part back is about 2 - 3 weeks.

€55.00*

Heel Guards black powder coating CB11963 / 0

If you don't like the original silver of the heel guards on your footrests, you can send us your own and we will coat it in black (RAL9005).The price is for one pair.Duration until you get the part back is about 2 - 3 weeks.

€50.00*

Sprocket Cover Scrambler 1200 black powder coating

Sprocket Cover Scrambler 1200 black powder coating CB12202 / 0

Who does not like the original silver on his sprocket cover of the SCrambler 1200, which can send us his cover gladly and we coat this in black (RAL9005). Duration until you have the part back is about 2 - 3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€40.00*

Handlebar mount black coated - LC CB12524 / 0

Black complacent? If you want to pull a black line on your R9T, you should also be able to coat the original signals with a nice handlebar mount black. Actually, because: here, too, we have the ugly die-cast look that hardly anyone likes. Very effective both as a contrast with the original silver handlebar and together with a black handlebar! Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Duration until you recover the part is about 4-6 weeks By default, we always do the parts in black. Semi-matt several other colors are of course also possible on request (but then the exact RAL tone must be specified).

€90.00*

Handlebar mount black coated - R9T CB12599 / 0

€90.00*

Fork feets Thruxton 1200 R / RS black painting

Fork feets Thruxton 1200 R / RS black painting CB11965 / 9

If you don't like the original silver fork feet on your thruxton, you can simply have it coated black by us. Just send the disassembled fork to us and you will get it back with black fork feet. If you can't do the disassembling yourself, you can also send the whole fork to us and we will do it for you (extra charge). It takes about 2 - 3 weeks until you get the part back. By default we always make the parts in black satin. Several other colors are of course also possible on request. The price is for the coating of both fork feet. Looks especially good in combination with black fork tubes.

€199.00*

Coat lamp ring black CB12453 / 0

True to the motto "black is beautiful" you can send us your silver lamp ring and we send it back to you coated in black. Duration until you have the part back is between 4 - 6 weeks. The displayed image is only an example. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black.

€35.00*

Thruxton / Scrambler Fork black anodize CB11136M / 1

Many do not like the original gold of the Thruxton R / RS / Scrambler fork so well. Therefore, we offer you to anodize the fork tubes in black. For this, the dismantled, disassembled & cleaned fork tubes must be sent to us. Or you choose the variant with assembly, then you just send us the dismantled fork to, we disassemble them here on site and then reassemble them after anodizing. Directly with better oil, which improves the response of the fork. The anodizing & shipping takes between 6 - 8 weeks.

From €259.96*

Details

Original manifold black ceramic coating CB10702 / 600

Black MATT coating of your original manifold. You send us your original manifold and we send it back to you with a black ceramic coating. This takes approx. 3 - 6 weeks. ATTENTION !!! The price may vary, both upwards and downwards. Some manifolds now consist of considerably more than 2 parts and often also include accessory plates, so the total price will be higher. If you would like an exact price, you can send us pictures of the parts to be coated in advance and we will make you an offer.

€320.00*

Ceramic coating exhaust black CB11964 / 600

We coat your original rear silencer black. Many would like to have a black exhaust, but don't want to buy a completely new one. We have the solution. You send us your original muffler and we coat it in black matt with a heat resistant ceramic coating. The price is for two mufflers. Without heat shields, brackets, mounting material etc. (these parts can be coated, but will be charged extra). takes about 2-3 weeks.

€400.00*