Complete Airbox Eliminator Kit from Classicbike-Raisch for Triumph Bobber & Speedmaster 1200. The kit gives your Bobber a complete look! By removing the Plastig airbox and the side covers, you get a cleaner look on the free frame hole, which you can look into from the side and from behind. You also have the cool look of the open DNA metal mesh air filter and the black painted intake manifolds, which ensure that the filters run at the perfect angle to the frame. Unlike many other manufacturers, we didn't want to simply develop a kit that removes the airbox and somehow attaches individual filters to the bike. We wanted our kit to really give the bike performance! This requires an optimum intake path, which is guaranteed by our intake funnels. With the appropriate mapping (Power Kit Stage 3), the power increases by +13 hp / +15 NM - if our side pipe exhaust system is also installed and the Stage 5 mapping is fitted to the motorcycle, this results in an increase in power of +29 hp / +30 NM.The kit can also be installed without a new mapping and the motorcycle will get a little more power. However, our clear recommendation is to do this in conjunction with a new mapping (power kit). On the one hand, the engine will then run healthier and on the other, you will get a clearly noticeable increase in power. You can find the power kits under accessories in this product description. The Airbox Eliminator Kit contains everything you need: 2x aluminum cover plates for the frame  2x intake manifolds - 3D-printed and painted matt black  2x DNA metal mesh air filter  1x DNA oil filter  Required mounting material Installation instructions When new, the DNA filters are purple due to the oil with which they are lubricated. Over time, they darken and lose their purple color completely. We recommend ordering the air filter care set (see accessories in this description) for filter care/cleaning. After cleaning and oiling, the filters are slightly purple again (as a tip for those who like purple).

Suede side bag suitable for all Scrambler 1200 models with bottom-mounted exhaust. If you move the exhaust of your Scrambler downwards, the original side bag looks rather unsightly. This handmade, 3mm thick leather bag from Unit Garage in Italy closes this unsightly gap and makes the Scrambler look good again. The small bag is also a very practical companion. The bag has 3 elastic bands inside the lid, under which you can quickly stow things (such as a wrench or sunglasses). There is also a pocket hidden under the zipper where you can stow the essentials for a short trip. The bag is waterproof.

Handmade start number side covers for your Twin. The covers are handmade from high quality fiberglass material, manufactured in Spain.The assembly is very simple and done in seconds. Simply pull off the original covers and insert the start numbers fields. Available individually for left & right or as a pair. The lids can be supplied unpainted.

Handmade pair of GRP side covers from Tamarit Motorcycles in Spain. The Muralla covers are smaller and more delicate than the original, rather bulky side covers. The covers sit nicely in the frame triangle and do not cover the frame tubes like the originals. In addition, 2 beautiful ribs are worked into the surface of the covers. The covers are handmade in Spain from high quality fiberglass material.Installation is very simple and can be completed in seconds. Simply remove the original covers and insert the start number fields. The side covers are available unpainted (raw) and in all original Triumph colors. Dimensions: 20x27

Handmade GRP side covers from Tamarit Motorcycles in Spain. The Dakota covers have a very special style. The extension to the injection bars, make your Thruxton look like there is a real transition between injection bars and airbox. The lids are handmade in Spain from high quality fiberglass material.The assembly is very simple and done in seconds. Simply pull off the original covers and insert the start numbers fields. Available individually for left & right or as a pair. There are the side covers in unpainted (Raw) as well as in all Triumph original colors. The most common Triumph colors as well as the unpainted parts we actually always have in stock. A color that we do not have in stock, takes about 2-6 weeks until it is available. Please note, this part is a handmade fiberglass part. Such parts can never be 100% true to size and equal (left to right).

Handmade GRP side covers from Tamarit Motorcycles from Spain. The Paris covers have a very special style. The extension to the injection rails, make your SpeedTwin look like there is a real transition between injection rails and airbox. The slightly indicated, angular ribs provide that special something. Looks especially good in conjunction with the Suzuka seat (is also installed in the pictures). The seat can also be found under the accessories in this description. The covers are handmade from high quality fiberglass material, made in Spain.The assembly is very simple and done in seconds. Simply pull off the original covers and insert the start numbers fields. Available individually for left & right or as a pair. There are the side covers in unpainted (Raw) as well as in all Triumph original colors. The most common Triumph colors as well as the unpainted parts we actually always have in stock. A color that we do not have in stock, takes about 2-6 weeks until it is available. Please note, this part is a handmade fiberglass part. Such parts can never be 100% accurate and equal. 

SW-Motech start number plate suitable for all Sw-Motech Legend Gear SLC bag holders (matching holders see ZUbehörartikel in this description). The plate is made of brushed aluminum and looks very high quality. On request, we can also coat this black powder for an additional charge. The sign is very easy, just like the Legend Gear bags with the quick release system clicked into SLC holder. Perfectly suited for all who have installed the SLC holder and do not always want to have the bag on the bike but do not want to look at the holder.

A scrambler simply needs a number plate. With this board you can give the Steet Scram a real competition look. Just stick your own or your favourite start number on it and that's it!

Aluminium side lid with integrated real leather bag in brown, suitable for Bonneville T100 & T120 as well as StreetTwin, Cup & Scrambler.On the one hand, the side covers are much nicer than the original ones, because they are simply much smaller, and on the other hand, the leather bag looks great and is also practical.Can simply be exchanged one to one with the original ones (are changed in a few seconds).The lids are sold separately.

Handcrafted aluminium side covers Made in Italy, for Bonneville T100 & T120 as well as StreetTwin, Cup & Scrambler.Attention fits on the Street Scrambler only on the left side.The lids give both the Bonneville and all Street Twin models a much nicer side view. The covers are much smaller than the original ones and disappear in the frame triangle, making the frame tubes visible.Replacing them takes only a few seconds (the lids are simply plugged in as well as the original ones).The aluminium covers are available in a matt satin silver or black powder coated finish. They are also available individually for left & right or as a pair (cheaper).

Leather bags as replacement for the original side lid (this is simply removed and replaced by the leather bag).Genuine Italian handmade by Wild Hog from heavy, robust leather. 25 x 23 x 10 cm. This is still real leather quality as you know it from the past! Suitable for left & right. Model Specific information at the end of the description! Smells like leather, feels like leather, and is heavy like leather! Dimensions of the bag 25 x 23 x 10 cm A bag can't be much higher quality, it's a bag for life! The nice thing about such bags is that they become more and more beautiful over the years and a bit of dark leather grease. Model specific specifications: Bonneville, Thruxton, Speed Twin, Street models: fits on the left side only if our open air filter cover is installed (see category Raisch Tuning Kits). On the right side the bag fits in its original condition.Scrambler: On the right side not mountable because of the exhaust. Bobber / Speedmaster: There are no restrictions on the models. Fits left and right.

One pair of high quality ABS plastic side covers in ripped style in gloss or matt black finish. Due to the three slit ribs the side lids look really nice and classic sporty. A nice little side effect is that the bike also gets a little more air. The lids are painted ready to mount. Behind the slits a fine, silver mesh aluminum grid is glued in, so you can't just look through the ribs.

A pair of Motone high-quality ABS plastic side covers in ripped style with a shiny or matt black finish. The three slotted ribs give the side lids a really classic sporty look.A nice little side effect is that the bike also gets a little more air.The lids are painted ready for mounting. A fine, silver mesh aluminium grid is glued in behind the slots so that you can't just look through the ribs.

Modified side cover for mounting when using the Vance & Hines 2 in 1 high level exhaust system. Available in Jet Black, Matt Black and Phantom Black. With heat shield. -