HeckWeck Kit - Thruxton 1200

Classicbike-Raisch

€199.00*

Prices incl. VAT plus shipping costs

Model

Kellermann Micro

from €69.95*

Rizoma LEGGERA Indicators

from €86.00*

Kellermann Atto Indicators

from €59.95*

Motogadget Mo.Blaze Tens 1 & 4 Indicator

from €59.00*

Blaze LED Turn signals

€79.94*

Rizoma IRIDE Indicators

from €72.00*

Rizoma CLUB Indicators

from €82.00*

Thruxton 1200 Cafe Racer Slim Seat

from €629.95*

Product number:	CB10948.3
item number:	211257388.R

Product information "HeckWeck Kit - Thruxton 1200"

Classicbike-Raisch rear wake kit for Thruxton 1200 - R - RS - TFC.

So nice clean & tidy should look the tail of a CafeRacer. Precise own production from aluminum and black powder coated.

Turn signal holder: These must be ordered separately. You will find two different turn signal holders below the description.

Turn signal holder Vario:
The turn signals are attached directly to the license plate with the Vario turn signal holders (the turn signal holders can be adjusted in width so that each turn signal sits in the perfect position for each license plate width).
This version is legal & StvO compliant.
Turn signal holder rear shocks:
The turn signals are mounted with a retaining plate from the inside of the strut. When the ignition is off you almost think the bike has no turn signals on it (but you can see them well enough when they light up). However, is not Stvo compliant, because the turn signals are too far in the rear).

Due to the rear under fairing (lower shell) there is a good splash protection. A LED license plate light with E-number is also included. It also comes with a plug that fits into the original wiring harness. That is, only turn signals, lights, etc. must be crimped and can then be connected without having to change anything on the wiring harness.

All other cables, connectors, screws, etc. that are needed for installation are of course also included.

Since the HeckWeck kit does NOT have a central tail light, it is mandatory to have 3in1 turn signals (these combine turn, tail & brake light in one turn signal).
Further down in this description you can order the turn signals in a set and get 10% discount on the turn signals.
All turn signals listed here are with E-number and street legal.

The conversion succeeds even less experienced screwdrivers without problems (because we pack a detailed installation instructions). Resistors are not necessary, because the flashing frequency can be adjusted via the menu.

Who does not dare to make the wiring for the lighting itself or simply does not feel like it, can order the ready wiring (accessory article HeckWeck Kit / LC under the 3-1 turn signals).

If you want to have it 100% correct for TÜV & police, you can order a reflector (accessory article HeckWeck Kit / LC under the 3-1 turn signals).

In addition, we recommend our license plate screw set to order to mount the license plate can be beautiful (accessory article HeckWeck Kit / LC under the 3-1 turn signals).

Triumph LC models from 2016:	Thruxton 1200 Thruxton 1200 R Thruxton 1200 RS

Triumph LC ab 2016	Thruxton 1200 Thruxton 1200 R Thruxton 1200 RS

-1

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Choose from the following articles in the article group: Blinker Halter - HeckWeck LC / Indicator brackets optional

0 / 99 chosen

Turn signal holder - Vario

Available, delivery time: 1-3 days

€17.95*

Turn signal holder shock inside

Design: 8er

Available, delivery time: 1-3 days

€16.90*

Choose from the following articles in the article group: Blinker/Rücklicht Kombinationen - Indicator/Rear Light Combinaions optional

0 / 1 chosen

Pico LED 3-1 tail light / indicator combination

Available, delivery time: 1-3 days

€143.96*

% €159.95* (10% saved)

2x Motogadget Mo.Blaze Tens 3 Indicator/Rearlight

Colour: Black

Available, delivery time: 1-3 days

€89.10*

% €99.00* (10% saved)

2x Rizoma IRIDE taillight / turn signal

Colour: Black

Available, delivery time: 1-3 days

€93.60*

% €104.00* (10% saved)

2x Rizoma LEGGERA S Taillights / Indicators

Colour: Silver

Available, delivery time: 1-3 days

€82.80*

% €92.00* (10% saved)

2x Rizoma LEGGERA S Taillights / Indicators

Colour: Black

Available, delivery time: 1-3 days

€96.30*

% €107.00* (10% saved)

2x Rizoma CLUB S Taillights / Indicators

Colour: Black

Available, delivery time: 1-3 days

€84.60*

% €94.00* (10% saved)

2x Rizoma CLUB S Taillights / Indicators

Colour: Chrome

Available, delivery time: 1-3 days

€84.60*

% €94.00* (10% saved)

Icon LED 3-1 tail light / indicator combination

Available, delivery time: 1-3 days

€152.96*

% €199.00* (23.14% saved)

2x Kellermann Atto Indicators

Available, delivery time: 1-3 days

€89.96*

% €99.95* (9.99% saved)

2x Kellermann Bullet Rücklicht/Blinker Kombination

Colour: Black

Available, delivery time: 1-3 days

€98.96*

% €109.95* (10% saved)

2x Kellermann Bullet Rücklicht/Blinker Kombination

Colour: Chrome

Available, delivery time: 1-3 days

€98.96*

% €109.95* (10% saved)

Blaze indicator / taillight combination

Available, delivery time: 1-3 days

€116.96*

% €129.95* (10% saved)

2x Kellermann Micro

Design: Blinker/Rücklicht Kombi.

Available, delivery time: 1-3 days

€80.96*

% €89.95* (9.99% saved)

Mini Bullet Indicators / Rear light

Available, delivery time: 1-3 days

€125.96*

% €139.95* (10% saved)

Frame tube LED 3-1 turn signal / taillight

Available, delivery time: 1-3 days

€98.96*

% €109.95* (10% saved)

Choose from the following articles in the article group: Zubehör Artikel HeckWeck Kit / LC optional

0 / 99 chosen

Reflector

Available, delivery time: 1-3 days

€10.90*

License plate screw set

Available, delivery time: 1-3 days

€8.90*

Wiring system HeckWeck & Eli Kit

Available, delivery time: 1-3 days

€34.95*

Design

Total bundle price for current configuration

€199.00 .... *

Prices incl. VAT plus shipping costs

Zubehörartikel

Kellermann Micro CB11162M / RS600

Kellermann Micro LED Blinker in black. As used by Kellermann in the highest quality. The turn signals are available as simple turn signals & as turn signal / taillight combination. At the turn signal / taillight combination is integrated into the turn signal taillight, turn signals & brake light. Both versions are of course with E-number. The price is for a turn signal.

From €69.95*

Details

Rizoma LEGGERA Indicators CB11274.2M / RS0

Rizoma "LEGGERA" Mini Blinker made of billet aluminum in top quality. Minimalist blinkers for anyone who wants to have them as inconspicuous as possible, but do not want to forego safety and a noble workmanship. The turn signals are very bright thanks to modern LED technology. The turn signals are with E-number. The price is for a single turn signal. Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals. If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description). The indicators are sold individually.

From €86.00*

Details

Kellermann Atto Indicators CB11500M / RS2

Kellermann Atto, the smallest turn signal available on the market! And that with E-number (so legal for front & back)! Perfect for anyone who just wants the turn signals to be as unobtrusive as possible on the bike. Especially in connection with the Atto rear light you get in the rear area an incredibly clean look. (The tail light can be found under accessories in this description). On the second picture, we have installed the Atto blinker on the handlebars. This is possible with all Triumph models that have a 1 inch armature with a hole to mount the mirror. You have to convert the bike to handlebar mirrors (if not already from the factory like e.g. the bobbers), order a turn signal extension, and put a black washer on top (you can get it from us). Never was a turn signal smaller. For comparison: the light area of the Atto® / Atto® Dark fits four times on a 1 cent coin! This consistent reduction opens up completely new design options on the motorcycle. Due to the Atto® / Atto® Dark, the "Blinker" component on the motorcycle can virtually disappear visually. This turn signal only stands out when it really needs to. When it flashes, it shines with an intensity that has made Kellermann's products legendary and the company a trendsetter time and again. The Atto® / Atto® Dark offers maximum brightness with minimal size, in short: it is "sensationally small - spectacularly bright". We recommend not to look directly into the light of this small power plant for too long! An optimized light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology **, the new EXtranz® - Extreme Optical Transparency Technology is used here for the first time Combination only possible. Since the Atto turn signals only have an M5 thread and almost all holders and indicator mounts are designed for M8 threads, there is a suitable adapter for this (see accessory article in this description). The price is for one turn signal

From €59.95*

Details

Motogadget Mo.Blaze Tens 1 & 4 Indicator CB12070.2M / RS0

The new Motogadget mo.blaze tens1 & 4 are currently the smallest road legal turn signals in the world. Due to the cleverly chosen design, the turn signals look chic and like a real turn signal despite their tiny size. Thus, they look really good on almost every motorcycle or, depending on their position, they stand out as good as not at all.Particularly advantageous with these turn signals is that they have an M8 thread despite their small size, which makes it possible to mount the turn signal on just about any bracket, adapter & tail from our range. Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely no longer to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The mounted turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC milled and available in black anodized or mirror polished finish. In addition, the turn signal is optionally available as a normal turn signal and as a version with position light. The turn signals with position light are ONLY suitable for the front. These shine permanently white and ensure that you are better seen when driving behind. The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed. Specifications: Total length with thread 29 mm Leangth without thread 11 mm Largest diameter 11 mm Wire leangth ca. 110 cm Weigth with wire ca. 20 g Mounting M8 Gewindebolzen Power consumption ca. 1 Watt

From €59.00*

Details

Blaze LED Turn signals CB00093 / RS600

Highsider aluminum LED turn signal pair in a modern discreet design.Modern LED technology ensures that the turn signals shine really bright and you are well seen. Dimensions:A: approx. 40 mmB: approx. 55 mmC: approx. 20 mmD: 19 mm Threaded bolt M8 x 1.25 mm, length: approx. 20 mm Note / Tip: Accessories turn signals are always supplied by the manufacturers with universal plugs or completely without plugs. Who wants to connect the turn signals simply to the original wiring harness of his motorcycle, which can still order suitable turn signal plugs for his motorcycle (the plugs can be found under the accessories in this description).

€79.94*

Rizoma IRIDE Indicators CB11270.3 / RS0

Colour: Chrome | Design: With Postion Light

Beautiful classic turn signals from Billet aluminum from Rizoma in all top top quality. The turn signals are very bright thanks to modern LED technology. The turn signals are with E-number. The price is for a single turn signal. Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals. If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description). The indicators are sold individually.

Variants from €72.00*

€92.00*

Rizoma CLUB Indicators CB11272M / RS0

Rizoma "CLUB" Mini turn signals made of billet aluminium in highest top quality. This is what we modern classic fans want! Modern small turn signals in a classic round design.The turn signals shine very brightly by modern LED technology and are seen so despite their small size very well.The turn signals are E-numbered and therefore road legal. The price is for a single turn signal.Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.The turn signals are optionally available with white position light (only for front!) or without. The indicators are sold individually.A resistor is included in the scope of delivery.

From €82.00*

Details

Thruxton 1200 Cafe Racer Slim Seat CB11730M / RS-1

Exclusive Classicbike-Raisch Slim Seat, with leather hump in Cafe Racer style, for the Triumph Thruxton 1200 & Thruxton R.The Thruxton 1200 has a beautiful rear frame with round arch, but you can't see it! An absolute disgrace. So we made it our business to build a slender and short bench that completely exposes the rear frame of the Thruxton. The result is a narrower line and a rear that looks for its equal (especially in connection with the HeckWeck Kit, see accessories in this description). Pictures say more than words here. The benches are produced in small series and completely handcrafted here in Germany. We have deliberately chosen a very high quality artificial leather (with grain looks like real leather!) for the bench, as it is more durable & easier to clean. In addition, artificial leather bleaches hardly to not at all and retains its dark black. The upholstery is made of various high-quality foam materials (sandwich construction) to provide the highest possible seating comfort.The seat base plate is made of extremely high-quality and stiff plastic. Thus the plate can be kept very thin, whereby the seat is beautifully flat, does not become unnecessarily heavy and is nevertheless completely stable. Due to the very narrow seat base plate, the original retaining eyes in the middle of the frame have to be cut off (see the last product photos). Even without these eyelets, the original seat can still be mounted normally, without shaking or anything else. We recommend to dab the frame at the interface with a black varnish to prevent rust.

€629.95*

Details

Kellermann Bullet Turn Signals CB10574M / RS2

Kellermann Bullet 1000 is milled from the solid. Aluminum in noble form and finish, uncompromising quality. The classic cartridge shape was reinterpreted and exactly in the right size, not too small, not too big. Glass diameter: 36.5mm, depth 50mm. Flowing forms and perfect transitions. The view remains on this blinker and glides along at the same time. The prices are per piece. Suitable flasher for connection to the original wiring harness.

From €89.95*

Details

Current selection:

Prices incl. VAT plus shipping costs

Total bundle price for current configuration

€199.00 .... *

Prices incl. VAT plus shipping costs

HeckWeck Kit - Thruxton 1200

Ask a question

Previously asked questions