Rear Fender Kit - Bobber - Flashed

Product information "Rear Fender Kit - Bobber - Flashed"

A shorter fender? The flashed fender kit from KRT Framework for the Triumph Bobber perfectly combines functionality and aesthetics. A clean fender without a central bead, designed significantly shorter than the original.
Unlike the original fender and most other accessory fenders, the flashed fender still has a flare on the side, which underpins a classic chopper handle.

Indicators and rear lights are also reduced to a minimum and integrated into the fender struts. Even if you don't notice them at first glance, you can't miss them in action thanks to modern SMD LED technology. Equipped with an E-mark and arranged in such a way that they meet all StVo requirements, you can mount this fender kit in the reassuring knowledge that you are 100% legal on the road.

The kit is manufactured entirely in Germany.

 

Materials used and production method:

The fenders are made from the finest carbon. The material is placed by hand in a negative mold and then baked under vacuum and heat. This process makes it possible to produce lightweight and extremely accurately fitting parts. Only high-quality components are used for the materials, including fibers and resins, which are also used for the production of rotor blades.

The mounting system, which is connected to the mudguard, is made of laser-cut and folded aluminum. After machining, it is powder-coated black. These brackets are designed so that you can adjust the height of the fender in relation to the tire. The fender struts themselves are made of steel to make them visually slim yet stable. A slotted hole is incorporated in the lower mounting for height adjustment.

The turn signal cable exits from the bottom of the fender struts and can be routed directly behind the swingarm tube to enable inconspicuous routing.

Our friend Marvin (KRT) carries out all the work steps himself, from mold construction to carbon production and metalwork.
If you are interested in the production of the prototypes and parts, take a look at the videos below the product description.

 

Versions and their finishes:

The Flashed fender is available in a visible carbon version, for which we use a carbon canvas fabric that is also used by Ducati and Porsche. On request, owners of a Bobber TFC can obtain a special version in which we use a twill weave. The matt finish visually matches the original carbon parts of the TFC. However, as the TFC is limited, this part is only produced on request.

We also offer two ready-painted versions: one in gloss black and one in matt black. Both match the original colors. For those looking for individual color options, an unpainted RAW version is available. This is primed and optimally prepared for a custom paint job by your painter.

 

The wiring:

For many, wiring is a vexing issue and probably the most time-consuming element of converting to the mudguard kit. Without high-quality electronic tools, the whole thing can hardly be carried out professionally. But we also have a plug & play solution for this in our range.

The fender struts with integrated lighting are already pre-wired and equipped with a high-quality 4-pin plug on each side. This plug is molded directly onto the end of the cable and sealed watertight thanks to the IP66 protection class. This is particularly important in the swingarm area, where the plug can get a lot of moisture.

We have assembled a pre-wired cable harness for the rear for this plug. With this, the mudguard can be easily fitted plug & play.
A little tip: If you order a KRT license plate holder at the same time, the license plate light will be supplied with the matching plug for our wiring harness (please contact us personally after ordering). This means you don't have to bother with individual cables during the conversion, but can plug our cable set directly into the original 8-pin plug of the original wiring harness.

Please note that the wiring harness must be purchased separately. You can find the wiring harness under accessories in this product description.

However, if you prefer to take care of the wiring yourself, we have deliberately left the cables of the fender struts long enough so that you can remove the plugs and connect the electrics yourself.

 

Accessories and combinable products:

To get the perfect overall look, your bobber naturally needs a side license plate holder.
There are several options to choose from (all of them fit in our range). However, we would recommend the one from KRT in order to have a complete package from KRT (can be found under accessories in this product description).

 

 

Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
10
10
10
10

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Sideway licens plate support Swingarm LC CB11838 / RS1
Side license plate holder including LED license plate light.Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases. Without expert opinion. From our experience, however, there are no problems with the green ones. Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm   Tips for complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard New blinker brackets must also be fitted if the original mudguard is removed. The accessories described can all be found under accessories in this product description.

€114.95*
Cable kit for flashed fenders CB12623 / RS0
Optimum connection without tedious soldering or time-consuming crimping! The adapter wiring harness was specially developed for the KRT flashed fender kit and enables effortless installation on all bobber models without modifying the original wiring harness. Installation is extremely simple: simply connect the wiring harness to the plug on the original wiring harness, which is located behind the bobber battery. This eliminates any need for complex electrical work. At the other end, the wiring harness provides the ideal connection option for our fender struts with integrated indicators. The plugs are of course sealed to IP66 standard to ensure reliable protection against heavy water spray. Another special feature is the cable with socket for the license plate light, which is also optimally sealed. If you order a license plate holder from us at the same time, you benefit from a plug & play connection: We equip the license plate light of our license plate holder with the matching plug right away - for even more convenient installation.

€59.00*
Side Mount Lizenz support Bobber / Speedmaster CB12108M / RS2
Three-piece licence plate holder made of 3mm aluminium or stainless steel for Triumph Bobber / Bobber Black & Speedmaster 1200, from our friend KRT Framework.Like all parts made by KRT, the side licence plate holder is of the highest quality and perfectly thought out. The scope of delivery includes all mounting materials as well as a number plate light. The two aluminium support plates make it possible to mount the unit without screws or cables. Long holes paired with three different hole patterns allow mounting in your desired position (side and height are adjustable). The licence plate holder is available with different plates for the countries (Germany, Austria, Switzerland, France, Netherlands, Belgium. Please choose in the selection) Dimensions of the license plates for the different countries: Germany: 180 x 200 mmSwitzerland: 180 x 140 mmAustria: 210 x 170 mmFrance: 210 x 130 mmNetherlands: 210 x 140 mmBelgium: 210 x 140 mmItaly: 177x177 mmSpain: 220x160 mmUSA: 178x102 mm

From €199.00*