Please choose your bike
PowerKit Speed Twin 1200 Stage 1 CB11772 / RS0
Powerkit Speed Twin 1200 Stage 1. consists of: Sport air filter, Raisch-machined air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping). Power plus + 12 Nm torque and 4 HP. In the engine speed range of 4600 - 4700 rpm you can even achieve a plus of 9 HP and 14NM. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).Our mappings were determined on the test bench with a lot of time and effort. These mappings are immediately uploaded to the Powercommander by us, resulting in a Plug&Play solution. This saves you from having to do your own tuning on external test benches, which are also very expensive.In addition to the performance plus, the result is a more harmonious and finer engine running.We increase the speed limit by 300 rpm, which is in the absolutely healthy range.This kit is of course without road approval and only suitable for race track use. The installation is relatively easy to do yourself. You only have to remove the tank to wire the Powercommander. The installation in our house takes about 1,5 hours = EUR 127,-

€849.00*
PowerKit Speed Twin 1200 Stage 2 CB11773 / RS0
Powerkit Speed Twin1200 Stage 2: X-Pipe, sports air filter, Raisch-mill air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping). Power plus + 16 Nm torque and 8 HP. In the important speed range of 4600 - 4700 rpm you can even achieve a plus of 11.5 HP and 17NM. See diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).Our mappings were determined on the test bench with a lot of time and effort. These mappings are immediately uploaded by us to the Powercommander, so that a Plug&Play solution results. This saves you from having to do your own tuning on external test benches, which are also very expensive.In addition to the performance plus, the result is a more harmonious and finer engine running. We increase the speed limit by 300 rpm, which is in the absolutely healthy range.This kit is of course without road approval and only suitable for race track use. For installation, the tank, the manifold system and a frame girder must be removed. Installation costs in our house 3,5 hours.

€1,039.00*
PowerKit Speed Twin 1200 Stage 3 CB11858 / RS0
Powerkit Speed Twin 1200 Stage 3: Raisch Racing camshaft, sport air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.Power plus + 16 Nm torque and 10 HP. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group). We have designed our racing camshaft in a way that you don't lose any power at all at the bottom and in the middle. But on top of that, an additional shovel is added and finally it is fun to turn the Speed Twin up to the limiter.Our mappings were elaborately determined on the test bench with a lot of time spent. These mappings are immediately uploaded to the Powercommander by us, so that a Plug&Play solution results. This saves you from having to do your own tuning on external test benches, which are also very expensive.In addition to the performance plus, the result is a more harmonious and finer engine running.We increase the speed limit by 300 rpm, which is in the absolutely healthy range.This kit is of course without road approval and only suitable for race track use. With this kit the camshaft must be mounted + valves must be adjusted additionally, which takes about 3,5 hours. Installation time 5 hours. This kit is primarily intended for riders who don't want the bike to be louder through the X-Pipe. A note on how to mount the camshaft is included in the kit.

€1,699.00*
PowerKit Speed Twin 1200 Stage 4 CB11859 / RS0
Powerkit Speed Twin 1200 Stage 4: Raisch Racing camshaft, X-Pipe, sport air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.Power plus + 16 Nm torque and 14 HP. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).We have designed our racing camshaft in a way that you don't lose any power at all at the bottom and in the middle. But on top of that, an additional shovel is added and finally it is fun to turn the Speed Twin up to the limiter.Our mappings were elaborately determined on the test bench with a lot of time spent. These mappings are immediately uploaded to the Powercommander by us, so that a Plug&Play solution results. This saves you from having to do your own tuning on external test benches, which are also very expensive.Beside the power plus, the result is also a more harmonic and finer engine running. We increase the speed limit by 300 rpm, which is in the absolutely healthy range.This kit is of course without road approval and only suitable for race track use. With this kit the camshaft must be mounted + valves must be adjusted additionally, which takes about 3,5 hours. Total installation time with us Stage 4 = 7 hours.A note on how to mount the camshaft is included in the kit.

€1,899.00*

RAISCH TUNING für Triumph Speed Twin 1200 ccm Motor. Unsere Abstimmungen und Leistungsdiagramme wurden alle auf einem Dynojet Prüfstand der neuesten Generation ermittelt. Triumph gibt seine Leistung an der Kupplung an. Die Leistunsgdiagramme basieren aber auf der Hinterradleistung und somit kann man das nicht 1:1 vergleichen. Zwischen der Kupplung und dem Hinterrad gehen ca. 6 PS und 7 NM verloren. Die kann man sich auf die Leistungsdiagramme einfach drauf rechnen. Um es einfach zu machen, haben wir in den Beschreibungen einfach nur die effektive PLUS Leistung zum Seriemotor in PS und NM angegeben. Triumph gibt im Prospekt eine Drehmoment von 112NM und 97 PS an der Kupplung an. Unsere Messungen ergaben 110 Nm und 94,8 PS. Auch schon unser Stage 1 KIT bietet einen sofort spürbaren deutlichen Leistungsschub, der einem ein Grinsen ins Gesicht zaubert, und das steigert sich mit jeder Tuningstufe natürlich weiter und weiter. Unsere Tuningsstufen sind modular aufgebaut. Wer bei Zeiten ein Upgrade möchte , bekommt das passende Mapping dazu kostenlos von uns aufgespielt. ( Voraussetzung der Powercommander wurde bei uns gekauft).
Unsere selbstentwickelten Racing Nockenwellen sind „Made in Germany“ und werden auf modernsten CNC Maschinen aus einem Rohling  produziert. (Nicht zu verwechseln mit billig hergestellten Nockenwellen aus Gussmaterial)
Es wird ein spezieller Nitrier- Stahl verwendet, welcher anschließend durch ein Härteverfahren auf Rockwell HRC 60 veredelt wird um eine Dauerhaltbarkeit sicher zu stellen.