Please choose your bike
Side Pipe exhaust system
CB12470M
/ RS-50
From
€1,560.00*
Exclusive Classicbike-Raisch x Mass 2-2 stainless steel complete system in Side Pipe - Hot Rod design, with E-number / road approval.Suitable for all Triumph Bobber models.
The Side Pipes are in our eyes the nicest exhausts for a Bobber. It's nice and short, freeing up the rear of the bike. In addition, the much thicker manifolds than the original ones, as well as the short beefy rear mufflers make the Bobber look beefier.
The system is a complete system. The manifold pipes are significantly thicker than the original and look much more massive. The original catalytic converter is retained.The side pipe system is 4.8kg lighter than the original exhaust of the Bobber.
The sound is nice and rich and muffled. Customers can choose from 6 sound variants with the Side Pipe exhaust system: - Standard with the built-in DB-killers (which can be removed with one screw).- Racing DB-killer, with which the motorcycle is louder but still DB-killers are installed (must be ordered separately, see accessory items in this description).- Without DB-Killer - With cat flap removed: A plate is welded (only tacked) between the manifold pieces, which ensures that the exhaust gases are forced to pass through the cat. The plate can be cut out, so that the exhaust gases are then routed directly through the manifold. So you get a straight pipe and the cat is almost dead. This option can also be used with the 3 different DB-killer variants. You can also see the plate under the product photos.
With our first own exhaust system, it was especially important to us that it not only has a nice design, but that it is also very good quality.The side pipe system is handmade in Italy at the company Mass, with which we work very closely.The processing, the material / surface and the accuracy of fit are very good.
Mohave Exhaust - Scrambler 1200
CB12324M
/ RS0
From
€890.00*
The Mohave stainless steel exhaust for all Triumph Scrambler 1200 models is probably the coolest exhaust available for the Scrambler and comes with road approval / E-number. The Euro 5 version also includes a catalytic converter, as this has been moved from the manifold to the silencer on the Euro 5 models, hence the price difference of €120 between the Euro 4 and Euro 5 versions.
The Mohave exhaust system is a slip-on system, i.e. it replaces the two large original rear silencers. The rest of the original exhaust system (manifold + catalytic converter for EU4) is retained. This makes changing the exhaust very quick and easy.
Compared to the original exhaust, the Mohave saves almost 5 kg (see below for exact weight difference).
The Mohave exhaust not only looks brutally cool, it also sounds extremely cool! The two short rear silencers produce a really deep and muffled roar, even with the DB killers fitted.The DB killers can also be removed for those who want even more sound. However, the grille at the end of the exhaust is then removed (see photos).The exhaust system is handmade in Italy. Inside the pipes is a damping system consisting of perforated pipes wrapped in sound-absorbing material.The manufacturer pays particular attention to very good workmanship of the materials and weld seams in order to guarantee a very high-quality appearance and a long service life.
The short look of the Mohave in combination with the slash cut is exactly what a real scrambler needs!The advantage of the exhaust is that it is nice and short, but not so short that it disturbs the passenger.
Difference in weight: Euro 4 Scrambler: original exhaust = 7.3kg - Mohave exhaust = 2.6kg - saving 4.7kgEuro 5 Scrambler: Original exhaust = 7.5kg - Mohave exhaust = 2.8kg - saving 4.7kg
ATTENTION for the Scrambler 2024 models. The exhaust system does NOT fit these models!
Mohave Exhaust - Street Scrambler / Scrambler 900
CB12325M
/ RS0
From
€1,480.00*
The stainless steel Mohave complete exhaust system for all Triumph Street Scrambler models is probably the hottest exhaust that there is for the Scrambler to buy and the whole thing with road approval / E-number.
The Mohave exhaust system is a complete system including manifold. In the new manifolds is a cat integrated. The scope of supply includes new heat shields with it.
Compared to the original exhaust, the Mohave saves just under 5kg.
The Mohave Exhaust not only looks brutally cool, but also sounds extremely cool! Really nice deep and muffled rumble the two short mufflers and that even with built-in DB killers.The DB killer can also be removed, for all those who want even more sound. However, the grille at the exhaust end then falls away (see photos).For those who want to have a more throaty sound, but do not want to remove the DB-killers completely, we also offer Racing DB-killers (see accessories in this description).
The exhaust system is handmade in Italy. Inside the pipes is a damper system, which consists of perforated tubes and wrapped with sound-absorbing material.A particularly large attention, is placed with the manufacturer on a very good processing in terms of materials and welds, in order to be able to guarantee a very high-quality optics and a long service life.
The short optics of the Mohave system in combination with the slash cut is exactly what a real scrambler needs!The good thing about the exhaust is that it is very nice and short, but not yet so short that it is disturbing for the passenger.
The exhaust is available in either silver matte (stainless steel) or black ceramic coated.
Sound Video:
Unit Garage Scrambler 1200 Exhaust
CB12337
/ RS0
€1,198.00*
Unit Garage 2-2 overhead titanium exhaust system with E-number for all Scrambler 1200 models.
The overhead 2-2 exhaust of the company Unit Garage from Italy consists of two really nice short mufflers in GP style.
Euro 4 models: with E-number (road approval). For Swiss customers we can also issue an extra certificate.Euro 5 models: The exhaust system is still delivered with E-number, because it is the same as on the Euro 4 machine. However, on the Euro 5 models the CAT is factory fitted in the rear silencer, so the E-number of the Unit Garage exhaust does not apply to the Euro 5 model.
The exhausts from Unit Garage are on the one hand very well made and on the other hand also sound more than cool, which you would not think at first glance with such a small muffler. But they really do! Really nice throaty, dull bass.
The rear silencers are supplied with removable DB-killer. The good thing about the Unit Garage DB-killers is that they are not like most other manufacturers at the exhaust end, but at the very beginning. This makes the exhaust look nice and open and empty.
The exhaust is very light by design and provides a weight saving of 3.5kg.
The assembly is the system is very simple and done in a short time.
On request, we can also supply the exhaust system in black ceramic coated.
ATTENTION for the Scrambler 2024 models. The exhaust system does NOT fit these models!
Zard Exhaust Scrambler 1200
CB11746M
/ RS0
From
€980.00*
Zard 2-2 slip-on stainless steel exhaust for Triumph Scrambler 1200 XC & XE with E-number (for both the EU 4 and EU 5 models).
The two rear silencers are positioned very close together in order to achieve the slimmest possible line. The large openings created by the slash cut on the end caps make the rear of the bike look even beefier and emphasize the off-road look of the Scrambler.The heat protection plate from the original exhaust system is retained. The accessory heat protection plate, which you can see in two product photos, can be found under the accessory items in this description.
The exhaust also delivers slightly more power than the standard system (see pictures for power curve).
The sound of the Scrambler is already audibly better and throatier with the exhaust, but in our ears it doesn't have the desired AHA effect that you would hope for. Sound video with original DB killers see below.We recommend people who like it a bit throatier and louder to order our additional Zard Racing DB-Killer (see accessories article in this description without road approval).In order to be able to remove the original DB-Killer from the exhaust system, a welding point that is difficult to access must be drilled out and milled away (takes a little more than half an hour). If you want to have this done, you must order the additional item DB-Killer removal Zard exhaust CB11514 (see accessories in this description).If the sound is still not enough for you, you will then have to install the H-pipe (cat replacement pipe).
The exhaust system is available either with E-number or as a racing version (without E-number). The end caps are also available in stainless steel (same design as the rest of the exhaust) or carbon fiber (surcharge).
ACHTUNG bei den Scrambler 2024 Modellen. Bei diesen Modellen passt die Auspuffanlage NICHT!
For Swiss customers, the exhausts can be supplied with a declaration of suitability.
Zard Speed Twin / Thruxton 1200 GP Exhaust
CB11764M
/ RS0
From
€1,044.00*
Zard 2-2 Slip on stainless steel exhaust for Triumph Speed Twin & Thruxton 1200 Attention for Thruxton 1200 & Speed Twin Euro 5 models from 2021 WITHOUT ABE!
The very high-quality stainless steel silencers are really short and crisp and, as the name suggests, are somewhat reminiscent of a Moto GP exhaust. Such a beautifully short exhaust system underlines the sporty line of the Speed Twin & Thruxton. The rather chunky original exhaust is always a bit of a nuisance on the motorcycles. If the exhaust is a little too small and sporty for you, the Zard Conical is just the thing. The exhaust also delivers slightly more power than the standard exhaust (see pictures for power curve). However, if you really want more power, we recommend fitting our performance kits.
The sound is already audibly better and throatier with the exhaust, but to our ears it doesn't have the desired AHA effect that you would hope for. Sound video see below.We recommend people who like it a little throatier and louder to order our additional Zard Racing DB killers (see accessory article in this description without road approval). With the racing DB killers, the bike then has the throaty and nice muffled bass sound that a 1200cc engine should have! However, the advantage here is that a DB-killer is installed, the bike is not too loud and everything looks original.In order to remove the original DB-killer from the exhaust system, a welding point that is difficult to access must be drilled out and milled away (takes a little more than half an hour). If you want to have this done by us, you must also order the additional item DB-Killer removal Zard exhaust CB11514 (see accessories in this description).If the sound is still not good enough, the X-pipe (cat replacement pipe) must be fitted (see accessories in this description).
The exhaust system is available either with E-number or as a racing version (without E-number). The end caps are also available in stainless steel (same design as the rest of the exhaust) or in carbon (surcharge).
Black exhaust:Unfortunately, the exhaust is not available in black from Zard directly. We can have the exhaust coated black at the customer's request. We have our exhaust systems coated in Germany with a very high-quality / resistant and deep black coating.
For Swiss customers, the exhausts can be delivered with a declaration of suitability.
Zard Speed Twin / Thruxton 1200 Conicial Exhaust
CB11765M
/ RS0
From
€1,092.00*
Zard 2-2 Slip on stainless steel exhaust for Triumph Speed Twin & Thruxton 1200. With E-number / road legal (does not need to be registered).Attention for Thruxton 1200 / R (EU 4 models): For these models, the exhaust is not homologated (will then be delivered with E-number for the SpeedTwin EU4).
Very high quality and well finished stainless steel muffler, in a classic, conical shape. The mufflers are in vergelich to the original, which are quite clunky and disturbing to the eye, nice and snug on the bike. Who would rather have it a little more minimal and sporty, we recommend the ZARD GP exhaust.
A little more power brings the exhaust compared to the series also (power curve see pictures). But if you really want more power, we recommend our performance kits to install.
The sound is already audibly better and throatier through the exhaust, but in our ears does not bring the desired AHA effect that you hope for. Sound video see below.We recommend the people who like it a little more throaty and louder, our additional Zard Racing DB-Killer to order (See accessories article in this description without road approval). With the racing DB-killers the bike then has the throaty and nice dull bassy sound that a 1200cc engine should have! The advantage remains that a DB-killer is installed, the bike is not too loud and it looks like everything is original.To be able to remove the original DB-killer on the exhaust system, a difficult to access welding spot must be drilled out and milled away (takes a little more than half an hour). If you want to have this done by us, you have to order the additional article DB-Killer Ausbau Zard Auspuff CB11514 (see accessories in this description).Who the sound then still not enough, which must then still install the X-Pipe (cat replacement pipe) (see accessory article in this description).
There is the exhaust system optionally with E-number or as a racing version (without E-number). In addition, the end caps are available in stainless steel (same design as the rest of the exhaust) or carbon (extra charge).
For Swiss customers, the exhausts can be delivered with declaration of suitability.
Zard Speed Twin / Thruxton 1200 2-1 Full Kit
CB11766M
/ RS0
From
€1,253.00*
Zard 2-1 stainless steel complete system (with manifold without KAT) for Triumph Speed Twin & Thruxton 1200. That brings performance! without ABE
Very high-quality and well processed stainless steel exhaust system from ZARD, with a nice short rear silencer in GP style.Optically a really cool and minimalistic thing! On the right side you have a nice crisp, short exhaust and on the left motorcycle side nothing at all!
The exhaust system brings in addition also still correctly achievement (in the point nearly 5 Ps, see achievement curve in the photos). If you are looking for even more power, we recommend to use one of our power kits.
Also the sound of the exhaust is just balm for the ears. Despite the rather small rear silencer, the 270° 1200ccm engine with the exhaust system sounds really dull and bass! The system is delivered with a removable DB-Killer. This one, however, has very little passage and spoils the sound a bit. If you don't want to drive without the original one, but it's too small and too quiet, we recommend our Zard Racing DB-Killer (see accessories in this description).
The exhaust system is available either with the end caps in stainless steel (same design as the rest of the exhaust) or carbon (extra charge).The system is also available completely black ceramic-coated. We have this done by ourselves, because it takes a very long time from Zard and we are much more convinced of the quality of our coating. Then it takes about two weeks. Simply order in the accessories of this description.
Hot Rod Exhaust
CB11652.1M
/ RS0
€1,699.00*
Hot Rod complete exhaust system for Bonneville T120 / T100 & Street Twin with E-number.The exhaust system is ONLY approved for the Bonneville T120.
Euro 5 models from 2021: On these models, the exhaust also fits. However, it is NOT homologated for the Euro 5 models (i.e. the model is behind the E-number on the exhaust is not deposited with). In addition, the cat box or an X-pipe from a Euro 4 model must be installed!The manifolds can easily be connected to the original KAT box. So the exhaust system is homogated and streets legal. The very good quality and fitting accuracy, provide for a high-quality optics and a problem-free cultivation. To assembly still new elbow seals are needed (see accessories in this description).The rear silencers are delivered with DB-Killer (which you can also upgrade for more sound). If the exhaust is not loud enough, you can also replace the KAT box with an X-Pipe (see accessories in this description).Since the exhaust system weighs only approx. 5Kg, there is a weight saving compared to the series: Bonneville 7kg (series 12kg) / Thruxton 5kg (series 10kg).The exhaust system also brings a bit of performance (see performance curve in the photos). However, if you are looking for much more power, we recommend our Raisch Tuning Kits.
Zard Short - Bonneville
CB11368M
/ RS0
From
€1,289.00*
A beautiful, short exhaust system for the Bonneville T120 - T100 with E-number for Euro 4 & Euro 5 models. ATTENTION! For the T100 Euro 4 models, the system has no approval! This exhaust is supplied complete with new manifolds, which are then also connected to the original KAT box.
The Zard Short as well as the Slim 2-2 rear silencers have a nice muffled and rich sound. The DB-Eaters are demountable. All mounting hardware is included. The EC-approved rear silencers have an engraved E-number and do not have to be entered in the vehicle documents. This results in a weight saving of approx. 5 kg.
In order to be able to remove the DB-killer on the exhaust system, a difficult to access welding spot must be drilled out and milled away. The removal takes a total of about 1/2 hour of work.If you want to have this done, you have to order the additional article DB-killer removal Zard exhaust CB11514 (see accessories in this description).
The exhaust is available for the Euro 4 model in two versions: In the Short it is the shorter variant and in the Slim the slightly longer. If you order the Slim variant, you can convert the exhaust to the Short variant at any time.For the Euro 5 models there is only the slightly longer Slim version.
There are special racing DB-killers developed by us for the exhaust for more sound than stock and also more power (because the original DB-killer is quite too). For a sound as you want it. See accessories in this item description.
For Swiss customers, the exhausts can be delivered with declaration of suitability.
Zard Six Days Street Scrambler
CB11360M
/ RS0
From
€930.00*
Zard 2-2 High exhaust system with E-number for Triumph Street Scrambler.
With E-number for Euro 4 & Euro 5 models.
The exhaust gives the scrambler a whole new look. The two very very chunky original dampers are replaced by the short and crisp Zard stainless steel dampers. Also the sound is great! Really nice dull. Click here for the Soundcheck
The exhaust is equipped with removable DB-killers for all who would like the sound to be even more nimble.In order to remove the DB-Killer from the exhaust system, a welding spot that is difficult to access must be drilled out and milled away.If you want to have this done, you have to order the additional article DB-Killer Zard Exhaust CB11514 (see accessories in this description).
The exhaust is available as a road version (with EC approval) and as a racing version (without EC approval). Due to the low interest we do not have the racing system in stock (delivery time on request).
Black: The complete exhaust system is supplied with a black ceramic coating.
There are special Racing DB-killers developed by us for the exhaust for more sound than series and also more performance (because the original DB-killer is quite closed). For the sound you want. See accessories in this item description.For Swiss customers, the exhaust can be delivered with a declaration of suitability.
Zard Rumbel Street Scrambler
CB11747M
/ RS0
From
€1,082.00*
Zard 2-2 High exhaust system with E-number for Triumph Street Scrambler. In silver, the exhaust is also supplied with silver heat protection plates. The pictured black heat shields cost 79€ extra (if you want this, you have to order it under the accessories in the product description).
With E-number for Euro 4 & Euro 5 models.
The exhaust gives the Scrambler a whole new look. The two but very clunky looking original mufflers are replaced by the short and crisp Zard stainless steel mufflers. Also the sound is great! Really nice muffled. See video at the end of the description
The exhaust is with removable DB killers, for those who like to have the sound a bit more throaty.In order to be able to remove the DB killers on the exhaust system, a hard to reach welding spot has to be drilled out and milled away.If you want to have this done, you have to order the additional article DB-killer removal Zard exhaust CB11514 (see accessories in this description).
Black: The complete exhaust system is delivered in black ceramic coated.
There are special Racing DB-Killer developed by us for the exhaust for more sound than series and also more power (because the original DB-Killer is quite to). For a sound as you want it. See accessories in this item description.
For Swiss customers the exhausts can be delivered with declaration of suitability.
X-Pipe / KAT & Front silencer replacement
CB11302
/ RS0
€209.95*
These X-Pipes replace the original Cat-Box / front silencer, which provides a much more pithy sound. In combination with an additional open exhaust system you get a really pithy, dull but also loud sound.
That's exactly how a 2 cylinder must sound!In addition, there is a weight saving of 1.7 kg compared to the standard catbox.
If the X-Pipe is not only about the more beautiful and louder sound, but also about noticeably more power, we advise you to use one of our power kits, in which the X-Pipe is included. Then the whole thing brings also a strongly noticeable performance gain. Click here for our performance kits.
The original veneer can be used again, so that the X-Pipe is not optically noticeable.
Do NOT fit to Thruxton TFC!
H-pipe / KAT & front silencer replacement
CB11480.1M
/ RS0
From
€349.00*
H-pipes for Triumph Street Scrambler & Scrambler 1200
These H-Pipes replace the original Kat Box / Vorschalldämpfer, which provides for a much pithier sound. In conjunction with an additional open exhaust system then results in a really robust, dumfery but also loud sound.
The original veneer can be re-installed, which makes the H-Pipe optically unobtrusive.
Zard Short - Bobber / SpeedM
CB11362M
/ RS0
From
€1,006.00*
Zard stainless steel exhaust for Triumph Bonneville Bobber & Speedmaster. Due to its short design, the exhaust gives the Bobber a very different and cool look, because the whole rear wheel is free.
With E-number for Euro 4 & Euro 5 models.Note for the Speedmaster 1200: The exhaust system also fits the Speedmaster, but is not homologated for it.
Nice muffled sound, convince yourself (see video at the end of the description). If the sound is not enough, you can remove or modify the removable DB-killer. In addition, there is still the possibility to install X-pipes cat replacement). So that one comes to a sound, as one wishes him from a Bobber.To be able to remove the DB-killer on the exhaust system, a hard to reach welding spot has to be drilled out and milled away.If you want to have this done, you have to order the additional article DB-killer removal Zard exhaust CB11514 in addition (see accessories in this description).
Completely made of stainless steel with or without ABE. Fits so to the original manifold.
There are special racing DB killer developed by us for the exhaust for more sound than series and also more power (because the original DB killer is quite to). For a sound as you want it. See accessories in this item description.
For Swiss customers the exhausts can be delivered with declaration of suitability.
%
Remus stainless steel exhaust for Thruxton
CB10911M
/ RS0
€949.00*
€971.04*
(2.27% saved)
A very high quality (in our opinion the highest quality) and chic stainless steel exhaust from Remus, suitable for the water-cooled Thruxton 1200 & Thruxton R.
Euro 5 models Thruxton RS: On these models, the exhaust also fits (but it must be bent a little something on the left manifold).However, it is NOT homologated for the Euro5 models (i.e. the model is behind the E-number on the exhaust is not deposited with).Who would like to mount it on an RS anyway please contact us.
Clearly slimmer, shorter & nicer than the original exhaust, which provides just the right line on the bike. Also the Vance&Hines exhaust has no cuts there (especially not in terms of sound).The installation of the exhaust is very simple and quickly done. The fit of the Remus exhausts is absolutely perfect!
The exhaust is with E-number & removable DB killers. The exhaust can be driven absolutely socially acceptable even without DB killers. Due to the special mounting technique of the company Remus, a removed DB-killer is usually not visible (Remus does not screw the DB-killers, but attaches them with a Seeger ring).
The exhaust not only sounds better, but also brings a little more power and especially torque (see power curve).
There are special racing DB killers developed by us for the exhaust for more sound than stock and also more power (since the original DB killer is quite too). For a sound as you want it and still have a DB-killer installed, making it look completely legal. See accessories in this item description.
For Swiss customers the exhausts can be delivered with declaration of suitability.
The exhaust is now delivered with a discreet Remus logo (see the last two biders).
In black, the exhaust is unfortunately no longer available. But can be coated on request by us black ceramic. See accessories article in this description.
%
Remus stainless steel exhaust for Speed Twin
CB11975M
/ RS0
From
€949.00*
€972.00*
(2.37% saved)
A very high quality (in our opinion the highest quality) and chic stainless steel exhaust from Remus, suitable for the Triumph Speed Twin 1200. Clearly slimmer, shorter & nicer than the original exhaust, which provides just the right line on the bike. Even the Vance&Hines exhaust has no cuts there (especially in terms of sound).The installation of the exhaust is very simple and quickly done. The fit of the Remus exhausts is absolutely perfect!
The exhaust is with E-number and can be driven absolutely socially acceptable. Euro 5 models from 2021: On these models, the exhaust also fits (but it must be bent a little something on the right manifold). However, it is NOT homologated for the Euro 5 models (i.e. the model is behind the E-number on the exhaust is not deposited with).
The exhaust not only sounds better, but also brings a little more power and especially torque (see power curve).
For Swiss customers, the exhausts can be delivered with declaration of suitability.
In the meantime the exhaust is delivered with a Remus logo.
ATTENTION: Our Rasich Racing DB-killers do NOT fit with the SpeedTwin exhaust system!
Dr. Jekill & Mr. Hyde Exhaust - Bobber
CB12600
/ RS1
€1,874.00*
Dr. Jekill & Mr. Hyde exhaust system suitable and legal for all Triumph Bobber models.
Dr. Jekill & Mr. Hyde.... Probably the most renowned manufacturer of motorcycle exhaust systems with valve control and road approval.Valve control, what does that mean? All Jekill & Hyde systems are supplied with an electronic exhaust flap that allows the motorcycle to be ridden legally on the road in 3 different sound modes. From quiet to nice bassy loud (the sound for a legal exhaust is really a dream, we have heard it on many bikes).Click on the following link to find out more about the flap control, the sound and the Jekill & Hyde brand:
The Jekill & Hyde flap exhaust systems - click here
The exhaust system for the Triumph Bobber is available in many different configurations. The photos in our product description are only a small selection of the available variants.You can choose between a black or silver rear silencer, as well as various different end cap designs.The price of the exhaust system varies depending on the configuration. Please configure the exhaust directly at Mr. Jekill & Dr. Hyde in their configurator and send us your configuration so that we can send you an order / offer.
Exhaust configurator - click here
Assembly at Classicbike-Raisch:The manufacturer stipulates that all exhaust systems are installed in specialist workshops to avoid errors during installation.Please contact us by phone or e-mail to book your workshop appointment with us.
Sound Video
Dr. Jekill & Mr. Hyde Exhaust - Speedmaster
CB12601
/ RS1
€1,874.00*
Dr. Jekill & Mr. Hyde exhaust system suitable and legal for all Triumph Speedmaster models.
Dr. Jekill & Mr. Hyde.... Probably the most renowned manufacturer of motorcycle exhaust systems with valve control and road approval.Valve control, what does that mean? All Jekill & Hyde systems are supplied with an electronic exhaust flap that allows the motorcycle to be ridden legally on the road in 3 different sound modes. From quiet to nice bassy loud (the sound for a legal exhaust is really a dream, we have heard it on many bikes).Click on the following link to find out more about the flap control, the sound and the Jekill & Hyde brand:
The Jekill & Hyde flap exhaust systems - click here
The exhaust system for the Triumph Speedmaster is available in many different configurations. The photos in our product description are only a small selection of the available variants.You can choose between a black or silver rear silencer, as well as various different end cap designs.The price of the exhaust system varies depending on the configuration. Please configure the exhaust directly at Mr. Jekill & Dr. Hyde in their configurator and send us your configuration so that we can send you an order / offer.
Exhaust configurator - click here
Assembly at Classicbike-Raisch:The manufacturer stipulates that all exhaust systems are installed in specialist workshops to avoid errors during installation.Please contact us by phone or e-mail to book your workshop appointment with us.
Dr. Jekill & Mr. Hyde Exhaust - Thruxton 1200
CB12602
/ RS1
€2,018.00*
Dr. Jekill & Mr. Hyde exhaust system suitable and legal for all Triumph Thruxton 1200 models.
Dr. Jekill & Mr. Hyde.... Probably the most renowned manufacturer of motorcycle exhaust systems with valve control and road approval.Valve control, what does that mean? All Jekill & Hyde systems are supplied with an electronic exhaust flap that allows the motorcycle to be ridden legally on the road in 3 different sound modes. From quiet to nice bassy loud (the sound for a legal exhaust is really a dream, we have heard it on many bikes).Click on the following link to find out more about the flap control, the sound and the Jekill & Hyde brand:
The Jekill & Hyde flap exhaust systems - click here
The exhaust system for the Triumph Thruxton 1200 is available in many different configurations. The photos in our product description are only a small selection of the available variants.You can choose between a black or silver rear silencer, as well as various different end cap designs.The price of the exhaust system varies depending on the configuration. Please configure the exhaust directly at Mr. Jekill & Dr. Hyde in their configurator and send us your configuration so that we can send you an order / offer.
Exhaust configurator - click here
Assembly at Classicbike-Raisch:The manufacturer stipulates that all exhaust systems are installed in specialist workshops to avoid errors during installation.Please contact us by phone or e-mail to book your workshop appointment with us.
Dr. Jekill & Mr. Hyde Exhaust - Speed Twin 1200
CB12603
/ RS1
€2,018.00*
Dr. Jekill & Mr. Hyde exhaust system suitable and legal for all Triumph Speed Twin 1200 models.
Dr. Jekill & Mr. Hyde.... Probably the most renowned manufacturer of motorcycle exhaust systems with valve control and road approval.Valve control, what does that mean? All Jekill & Hyde systems are supplied with an electronic exhaust flap that allows the motorcycle to be ridden legally on the road in 3 different sound modes. From quiet to nice bassy loud (the sound for a legal exhaust is really a dream, we have heard it on many bikes).Click on the following link to find out more about the flap control, the sound and the Jekill & Hyde brand:
The Jekill & Hyde flap exhaust systems - click here
The exhaust system for the Triumph Speed Twin 1200 is available in many different configurations. The photos in our product description are only a small selection of the available variants.You can choose between a black or silver rear silencer, as well as various different end cap designs.The price of the exhaust system varies depending on the configuration. Please configure the exhaust directly at Mr. Jekill & Dr. Hyde in their configurator and send us your configuration so that we can send you an order / offer.
Exhaust configurator - click here
Assembly at Classicbike-Raisch:The manufacturer stipulates that all exhaust systems are installed in specialist workshops to avoid errors during installation.Please contact us by phone or e-mail to book your workshop appointment with us.
Dr. Jekill & Mr. Hyde Exhaust - Bonneville T120
CB12604
/ RS1
€1,944.00*
Dr. Jekill & Mr. Hyde exhaust system suitable and legal for all Triumph Bonneville T120 Euro 5.
Dr. Jekill & Mr. Hyde.... Probably the most renowned manufacturer of motorcycle exhaust systems with valve control and road approval.Valve control, what does that mean? All Jekill & Hyde systems are supplied with an electronic exhaust flap that allows the motorcycle to be ridden legally on the road in 3 different sound modes. From quiet to nice bassy loud (the sound for a legal exhaust is really a dream, we have heard it on many bikes).Click on the following link to find out more about the flap control, the sound and the Jekill & Hyde brand:
The Jekill & Hyde flap exhaust systems - click here
The exhaust system for the Triumph Bonneville T120 is available in many different configurations. The photos in our product description are only a small selection of the available variants.You can choose between a black or silver rear silencer, as well as various different end cap designs.The price of the exhaust system varies depending on the configuration. Please configure the exhaust directly at Mr. Jekill & Dr. Hyde in their configurator and send us your configuration so that we can send you an order / offer.
Exhaust configurator - click here
Assembly at Classicbike-Raisch:The manufacturer stipulates that all exhaust systems are installed in specialist workshops to avoid errors during installation.Please contact us by phone or e-mail to book your workshop appointment with us.
XL-Pipe De-Cat replac
CB11934M
/ RS1
From
€499.00*
These X-Pipes replace the original Kat-Box / front silencer, which provides a much more pithy sound. In combination with an additional open exhaust system, this results in a really throaty, dull but also loud sound.Also in combination with the original exhaust system you get a much more pithy sound.This is exactly how a 2 cylinder must sound!In addition, the original manifold connecting pipes that go from the cat box to the rear silencers are replaced.Additionally, the X-Pipe and the new manifold pipes result in a significant weight reduction.If you are not only interested in a more beautiful and louder sound, but also in noticeably more power, we advise you to install a large air filter cover and a sports air filter. In addition to that, you have to install a Power Commander and tune the bike on a test bench.The original paneling can be reinstalled, so that the X-Pipe doesn't attract attention.The installation of the X-Pipe / removal of the cat is not legal.
Zard Thruxton 1200
CB11361.4M
/ RS2
From
€1,111.00*
Zard 2-2 Slip-on exhaust system for Thruxton 1200 & SpeedTwin (for the SpeedTwin & Thruxton RS/TFC WITHOUT approval).
A nice short end silencer for the Thruxton. Noble processed with visible weld seams. Choice of stainless steel or titanium. The exhaust sounds nice and dull.
The exhaust is equipped with removable DB-killers for all who would like the sound to be even more nimble. We also offer Racing DB-Killers especially made for this exhaust system. They give you a nice, crunchy sound (as it should be), but it still looks legal, because there is a DB-Killer in it (see accessories in this description).
The exhaust is available as a road version (with EC approval) and as a racing version (without EC approval). Due to the low interest we do not have the racing system in stock (delivery time on request).
IXIL IRONHEAD Thruxton 1200
CB11149M
/ RS3
€566.95*
IXIL Ironhead stainless steel exhaust for Thruxton 1200 & SpeedTwin 1200. The exhaust has an E-number and is therefore street legal for all Euro 4 models.Attention! The approval only applies to Euro 4 models - the exhaust is NOT homologated for Euro 5 models (but the E number is still on the silencer, so nobody will probably ever notice).
A really nice short muffler that provides a really sporty line. The exhaust provides in addition to the sporty short optics also for the suitably pithy sound, which must have a 2-cylinder. Really nice muffled & bassy.
There are special racing DB killer developed by us for the exhaust for more sound than series and also more power (because the original DB killer is quite too). For a sound as you want it and still have a DB killer installed, making it look completely legal. See accessories in this item description.The original DB-killers are also attached with a spot weld at the factory. To be able to remove the DB-Killer, this spot weld must be milled away (then you can fix it einrach with a screw and quite simple one & remove). If you do not want to do this work yourself, you can also let us do it. See accessories in this description "DB Killer removal".
At the customer's request, we can also have the exhaust coated black for an additional charge.
Shark for Thruxton 1200 / Speed Twin
CB11055M
/ RS4
€539.00*
Shark replacement silencer for Triumph Thruxton 1200 & Speed Twin suitable for the original manifold.For Thruxton RS/TFC with E-number
The exhaust is made of stainless steel and it is available in brushed or polished. With the exhaust you get a really rich dull sound, already with DB-Killern and who wants it to have a real kernel the DB-Killer raus. If you do not like the laser engraved Shark logo, we can polish it out (see article in the accessories of this description)
Hot Rod Exhaust System
CB12376M
/ RS5
From
€1,430.00*
2-2 stainless steel complete system in side pipe - hot rod design, suitable for our Triumph Twin.
This exhaust system gives your Triumph a whole new look and the whole thing with E-number & street legal.The Hot Rod system is a complete system & has catalytic converters installed in both pipes. The manifold pipes are much thicker than the original ones and look much more massive. Also, the exhaust system has an indifference pipe (connecting pipe between the two pipes, which is very important for power and torque). The original catalytic converter is replaced. By eliminating the rear muffler and the original cat box, a decent amount of weight is saved.
The exhaust system comes with removable DB killers. So if the exhaust is not loud enough for you, you can simply remove them. The system has a nice rich muffled sound.
The Hot Rod system is of very high quality and we handmade in Italy.
The exhaust system is only available in silver.
Zard 2-1 Full Kit low mount Scrambler 1200
CB11861.2M
/ RS5
From
€1,449.00*
2-1 stainless steel complete system (including manifold) for the Triumph Scrambler 1200 with E-number and road legal.The scope of delivery also includes an aluminum side cover including leather bag for the right side (see photos).ATTENTION for the Scrambler 2024 models. The exhaust system does NOT fit these models!
A real Scrambler traditionally has an overhead exhaust. But an overhead exhaust also brings some disadvantages, especially heat! It quickly becomes uncomfortably hot on the leg to the point of burning.For all those who find this very disturbing, there is now this chic exhaust from the house Zard. A rear muffler in off road design (with removable DB killers), complete stainless steel manifold (in the racing version without KAT) and a really chic aluminum side cover. This kit messes up the look of the Scrambler no way! On the contrary, through the exposed side view, the bike looks even more beautiful and especially the rear tidier.In addition, the exhaust system of the Scrambler also gives a whopping weight savings of 5kg! Original exhaust system: 10.2kg / Zard: 5.2kg
Adjusting the mapping is not necessary, but would certainly bring performance, since the KAT is omitted from the exhaust.The sound is really nice rich and muffled!
The exhaust system is available with road approval (With ABE / E-number) and as a racing version.For our Swiss customers, we can also issue an extra certificate.
%
Arrow Racing Manifold Thruxton 1200
CB11604
/ RS5
€675.00*
€747.85*
(9.74% saved)
A pair of stainless steel racing manifolds for the Thruxton 1200 & SpeedTwin.
These manifolds replace the original manifold & catbox. The motorcycle can then be ridden without a catalytic converter. The original exhaust or any other accessory exhaust can still be used. By removing the catbox, the sound becomes significantly throatier. The manifolds also deliver more power than the originals with catbox. The performance measurements on the dyno rides (see pictures) were carried out with the rear silencers open. Individual tuning of the motorcycle on a dynamometer is recommended. A power commander is then also required for tuning.
The manifolds are designed with an indifferent pipe. However, with Arrow this only serves as a holder (the manifolds are continuous and the pipe is closed - so there is no connection from the left to the right manifold). The manifold can be easily opened with a hole saw or a milling cutter (at the point where the indifference tube is welded on) and a connection can then be made between the two manifolds. We think this makes a lot of sense as it increases performance.
Remus Exhaust - StreetTwin / SpeedTwin 900
CB12514M
/ RS6
From
€690.00*
Stainless steel exhaust from Remus, suitable for Street Twin / Speed Twin 900 Euro 5 models. Significantly slimmer and considerably shorter than the original exhaust, which makes for a sporty short line.The exhaust also fits the old Euro 4 models. However, the E-number engraved on the exhaust is not homologated.
Fitting the exhaust is very easy and quick. The fit of the Remus exhausts is absolutely perfect!
The exhaust is with E-number & removable DB killers. The exhaust can be driven absolutely socially acceptable, even without DB killers. Due to the special fastening technique of the Remus company, a removed DB-killer is usually not recognisable (Remus does not screw the DB-killers, but fastens them with a circlip).
The exhaust not only sounds better, but also produces a little more power and above all torque (see power curve).Soundfiles of the Remus and the original exhaust can be found below the description under Downloads.
There are special racing DB-killers developed by us for the exhaust for more sound than standard and also more power (as the original DB-killer is quite closed). For a sound as you want it and still having a DB-killer installed, making it look completely legal. See accessories in this item description.
For Swiss customers, the exhausts can be delivered with a declaration of suitability.
Remus Stainless Steel Exhaust Bonnie T100
CB11358M
/ RS6
From
€830.00*
Stainless steel exhaust from Remus, suitable for all Bonneville T100 models. Significantly slimmer and considerably shorter than the original exhaust, which makes for a sporty short line.
Fitting the exhaust is very simple and quick. The fit of the Remus exhausts is absolutely perfect!
The exhaust is with E-number & removable DB killers. The exhaust can be driven absolutely socially acceptable, even without DB killers. Due to the special fastening technique of the Remus company, a removed DB-killer is usually not recognisable (Remus does not screw the DB-killers, but fastens them with a circlip).
The exhaust not only sounds better, but also produces a little more power and above all torque (see power curve).Soundfiles of the Remus Euro 5 exhaust as well as of the original exhaust can be found below the description under Downloads.
There are special racing DB-killers developed by us for the exhaust for more sound than standard and also more power (as the original DB-killer is quite closed). For a sound as you want it and still having a DB-killer installed, making it look completely legal. See accessories in this item description.
For Swiss customers, the exhausts can be delivered with a declaration of suitability.
Motone Odin GP Exhaust
CB12263.2M
/ RS8
From
€669.95*
Motone Odin exhaust system in GP style for water cooled Triumph Modern Classic models.
Odin exhausts are made from rolled 300 stainless steel. The mufflers are hand welded and extra not ground so that the beautiful welds remain visible. These are nicely tarnished and give the exhaust system a very special look.
The quality & fit is really absolute top class just like the sound!
Unfortunately, the exhausts are without E-number. Not because they are too loud, but simply because such an approval is now much too expensive. The systems are supplied with removable DB-killer. If you leave them in, the exhaust system is not too loud and you will not be noticed anywhere. If you take them out, the sound is much more throaty but also not too loud (because the catalytic converter still dampens away a lot). Who wants to have it really throaty & loud, the catalyst must still replace by an X-pipe (see accessory article in this description).
%
HBS 605 for Street Twin & Cup
CB11020
/ RS8
€519.00*
€699.00*
(25.75% saved)
Classic Silencer from England by Norman Hyde for Triumph Street Twin / Cup - Speed Twin 900.
The Norman Hyde systems have a very nice sound. Really nice muffled & bassy. For whom the sound with the completely open exhaust system is too loud, we also offer extra DB-killers, which we have developed for the Norman Hyde exhaust systems. The exhaust insert can be found under the accessories below this product description.
The exhausts are nice and tight to the bike and are a good deal shorter than the original. Classic bottle design as it must be on an English motorcycle. The exhausts are made of steel chrome plated, which rounds off the classic look skillfully.
Who would like to have the exhaust system in black, which can be ordered on request & for an additional charge from us.
Motone Saturn Stainless Steel Exhaust
CB11974M
/ RS8
From
€549.95*
Saturn Style stainless steel exhaust system for water cooled Triumph modern classic Bikes.These chic and short rear mufflers are made of high quality stainless steel and have as a contrast the aluminium turned end caps.The exhaust is WITHOUT E-number, which makes it absolutely not a howler bag! The sound is really great and also not too loud (most of the volume is taken away by the KAT and not the rear silencers).Included in delivery are connecting pipes to the KAT / X-Pipe, new gaskets and clamps.Optionally available in black & silver.If you want to have a really pithy and loud sound on your machine, we recommend to install the X-Pipe from our program (see accessories article in this description).
2-1 Short Low Exhaust - Scrambler 1200
CB12771
/ RS10
€1,350.00*
A beautiful short 2-1 stainless steel complete exhaust system - with E-number / road approval.
This handmade stainless steel complete system for the Triumph Scrambler 1200 models gives your motorcycle a completely new look.
The bottom-mounted exhaust gives you a different view of the side of your Scrambler, as the powerful exhaust no longer catches the eye in the typical Scrambler way.
The switch to a bottom-mounted 2-1 exhaust on a Scrambler 1200 also makes technical sense.
Many riders are bothered by the rather strong heat development on the leg with an overhead exhaust. This problem no longer exists with a bottom-mounted exhaust system.
The short version of the bottom-mounted exhaust system ensures a very clean rear end and a clear view of the rear wheel rim.
For those who prefer something more classic and not quite so short, the exhaust is also available as a cross version, where the rear silencer is longer.
The short exhaust system also gives your Scrambler a really throaty sound! And if that's not loud enough for you, you can also retrofit the DB-killer.
Classicbike-Raisch tip / accessories:
Due to the standard overhead exhaust, the Scrambler does not have a particularly attractive side cover.
In order to have a visually attractive solution here, we recommend ordering the leather side cover bag. This can be found under accessories in the product description.
2-1 Cross Exhaust - Scrambler 1200
CB12772
/ RS10
€1,350.00*
A classic 2-1 stainless steel complete exhaust system - with E-number / road approval.
This handmade stainless steel complete system for the Triumph Scrambler 1200 models gives your motorcycle a completely new look.
The bottom-mounted exhaust gives you a different view of the side of your Scrambler, as the powerful exhaust no longer catches the eye in the typical Scrambler way.
The switch to a bottom-mounted 2-1 exhaust on a Scrambler 1200 also makes technical sense.
Many riders are bothered by the rather strong heat development on the leg with an overhead exhaust. This problem no longer exists with a bottom-mounted exhaust system.
The cross version of the 2-1 system has a classic length. We recommend the short version for those who would like to have it shorter and want the rear end to be even clearer.
The cross exhaust system also gives your Scrambler a really nice throaty sound! And if that's not loud enough for you, you can also retrofit the DB-killer.
Classicbike-Raisch tip / accessories:
Due to the standard overhead exhaust, the Scrambler does not have a particularly attractive side cover.
In order to have a visually attractive solution here, we recommend ordering the leather side cover bag. This can be found under accessories in the product description.
We also recommend buying a set of new manifold gaskets.
Zard Slip on - Triumph 400
CB12700
/ RS10
€459.00*
Zard stainless steel exhaust suitable for the Triumph Speed 400 / Triumph Scrambler 400 X with EC approval (road legal).
The beautifully slim stainless steel silencer is a great visual match for the Triumph 400 models. In terms of sound, the systems also offer added value compared to the series. They sound beautifully muffled and throaty, giving the small Triumph 400s a sound befitting their status (but not too loud). If you like it even throatier, you can install the DB-Killer in the exhaust.
The exhaust has a removable DB-killer installed.In order to remove the original DB-killer from the exhaust system, a welding point that is difficult to access must be drilled out and milled away (takes a little more than a quarter of an hour). If you would like to have this done by us, you must also order the additional item DB-Killer removal Zard exhaust CB11514 (see accessories in this description).
The exhaust has a removable DB-killer installed.In order to remove the original DB-killer from the exhaust system, a welding point that is difficult to access must be drilled out and milled away (takes a little more than a quarter of an hour). If you would like to have this done by us, you must also order the additional item DB-Killer removal Zard exhaust CB11514 (see accessories in this description).
Weight saving compared to standard: 0.5 kgMore power compared to standard: 0.8 hp
Sound video
Montage video
Zard Under Engine Full Kit - Triumph 400
CB12701
/ RS10
€839.00*
Zard stainless steel complete exhaust system in Under Enigne design. This means that there is a beautiful small rear silencer in slash cut design directly on the left side under the engine. The exhaust system fits the Triumph Speed 400 & Scrambler 400 X.
The exhaust system is a complete system with manifold, which means that the original manifold of the motorcycle can be removed. This means: less weight / more power & a significantly cooler & throatier sound.
As we know from Zard, the system is handmade in Italy and has a very high quality standard.
Weight saving compared to standard: 7.4 kgMore power compared to standard: 2.4 hp
Sound check:
Montage video:
Unit Garage Exhaust - Triumph 400
CB12724M
/ RS50
From
€679.95*
Unit Garage lower exhaust for Triumph Speed & Scrambler 400 models.
The lower exhaust from Unit Garage in Italy is a very special exhaust. Because no other exhaust is so short! A GP look as it is written in the book.And the whole thing comes with an E number (road approval). We can also issue a special certificate for Swiss customers.
The exhaust systems from Unit Garage are not only very well made, they also sound more than awesome, which you wouldn't think at first glance with such a small silencer. But they really do! They give the 1-cylinder a really throaty sound!
The rear silencers are supplied with removable DB killers.
The rear silencer is available with or without grille (see photos). The advantage of the grille is that you can no longer really see whether the DB-killer is fitted or not.
Due to its design, the exhaust is very light and ensures a considerable weight saving.
The exhaust can also be supplied with a black coating on request.
Shark Bottle Exhaust - LC
CB11525.1M
/ RS500
From
€899.00*
Stainless steel exhaust in bottle design for the Triumph 1200 Bobber, Bobber Black & Speedmaster1200. With EG-ABE. coated in matt black.
Bobber Euro 5 models from 2021: The exhaust also fits these models. However, it is NOT homologated for the Euro 5 models (i.e. the model is not included behind the E-number on the exhaust).Bonneville Euro 5 models: Unfortunately, the exhaust does not fit the Euro 5 models on the Bonneville. Speedmaster 1200: The exhaust system also fits the Speedmaster, but is not homologated for it.Bonneville T100: The exhaust system also fits the T100, but is not homologated for it.
With its classic bottle shape, the exhaust gives your Triumph a very nice and subtle nostalgic touch, just like you know it from the old days. The exhaust is supplied with a removable DB killer. With the original killers, you get a better sound with the exhaust, but not the sound that most customers are hoping for (the original motorcycle already sounds too throaty for that). The only option here is to remove the DB-killer and ride without it, or to install our racing DB-killer. These sound almost the same as without. But there is something inside (see accessories in this description).
We can also issue a certificate for Swiss customers.
New
Mohave Exhaust - Scrambler 1200 Euro 5 +
CB12777
/ RS600
From
€1,480.00*
Stainless steel Mohave complete exhaust system for Triumph Scrambler 1200 Euro 5 models from 2024 is probably the hottest exhaust available for the Scrambler, and it's street legal with an e-number. The Mohave exhaust system is a complete system. That means it comes complete with manifolds, mufflers and the rear heat shields.Not only is the exhaust system an absolute visual highlight, it also saves a decent amount of weight compared to the series. The Mohave Exhaust not only looks awesome, but also sounds extremely powerful!The two short mufflers, which also have built-in DB killers, ensure a powerful, throaty rumble.The DB killers can also be removed for those who want even more sound. However, the grille at the exhaust end is then no longer available (see photos).For those who want a slightly throatier sound but don't want to remove the DB killers completely, we also offer racing DB killers (see accessories in this description).The exhaust system is handmade in Italy. Inside the pipes, there is a muffler system made of perforated pipes wrapped in sound-absorbing material.Catalytic converters are integrated into the exhaust manifold.The manufacturer places particular emphasis on excellent workmanship in terms of materials and welds, in order to guarantee a very high-quality look and a long service life.The short appearance of the Mohave system in combination with the slash cut is exactly what a real scrambler needs!The good thing about the exhaust is that although it is very nicely short, it is not so short that it is disturbing for the passenger.The exhaust is available in either silver matt (stainless steel) or black ceramic coated.
Unit Garage 2-1 GP exhaust system - Scrambler 1200
CB12672M
/ RS600
From
€1,219.00*
Unit Garage stainless steel exhaust system complete for Scrambler 1200 models without catalytic converter.Attention not suitable for Euro 5 Plus models (from year of construction 2024).
The original, top-mounted exhaust on the Scrambler is very attractive, but also impractical. The waste heat when riding is sometimes very unpleasant. This problem is solved with a bottom-mounted exhaust.
The Unit Garage GP exhaust system is a complete system including manifold. The system is without catalytic converter (therefore also without road approval). The sound of the system is a dream! Really nice and throaty and really loud. A removable DB-killer is installed in the rear silencer.
The system is 6 kg lighter than the original system.
We recommend ordering the side cover bag as an accessory. If you weave in the original exhaust, the original right-hand side cover looks very unattractive and a gap is created. This gap is perfect for a small bag.The bag can be found under accessories in this product description.
Zard Street Twin Low
CB12583M
/ RS600
From
€1,158.00*
A beautiful, short exhaust system for the Street Twin. For all those who like their exhaust to be short and inconspicuous.In order to remove the DB-Killer from the exhaust system, a welding spot that is difficult to access must be drilled out and milled away. If you want to have this done, you have to order the additional article DB-Killer Zard Exhaust CB11514 (see accessories in this description).
There are special Racing DB-killers developed by us for the exhaust for more sound than series and also more performance (because the original DB-killer is quite closed). For the sound you want. See accessories in this item description.For Swiss customers, the exhaust can be delivered with a declaration of suitability.
Short Slash Cut Exhaust - Bobber / SpeedM
CB12374M
/ RS600
From
€289.95*
Stainless steel slip on exhaust system for all Triumph Bobber & Speedmaster 1200 models.
The Short Slash Cut exhaust system for Triumph Bobber / Speedmaster 1200 is a really nice short & crisp exhaust, which provides a very radical and clean look in the rear of the Bobber.The slip on mufflers can be easily plug & play replaced with the original ones. The exhaust can be installed with the original cat box as well as with an X-pipe.
The system provides a throaty, powerful sound. If the original cat box remains installed, the exhaust is in our opinion still absolutely socially acceptable drivable. If an X-pipe is additionally installed, then the exhaust already makes really proper noise (exactly the right thing for all those who like it really loud).
The quality and workmanship of the stainless steel exhaust system is really good, here you get an absolutely unbeatable price / performance ratio.
Jupiter Exhaust
CB12296M
/ RS600
From
€114.95*
A pair of Jupiter Exhaust Tips from Motone. Available in black (die-cast aluminum) or polished real brass.
The tips are simply plugged into the manifold end and then attached. This makes for a really radical and short exhaust look.
The tips are of course not legal. Since the water-cooled Triumph models all have a large KAT collector under the engine, the sound is not too brutally loud (but of course already properly throaty).Just the right thing for anyone who wants to have a really short exhaust for a small amount of money.
Header for Bobber & Speedmaster
CB11553M
/ RS600
From
€399.00*
One pair of original manifolds suitable for Bobber & Speedmaster. Available in chrome, brushed matt and black.
IXIL Bonneville
CB11150
/ RS600
€566.95*
IXIL stainless steel slip-on exhaust for Bonneville. With E-number & removable DB-killer.
FOR T100 WITHOUT ABEEuro 5 models from 2021: The exhaust also fits these models. However, it is NOT homologated for the Euro5 models (ie the model is behind the E-number on the exhaust is not deposited with).
A really nice short muffler that provides a really sporty line. The exhaust provides in addition to the sporty short optics also for the suitably pithy sound, which must have a 2-cylinder. Really nice muffled & bassy.
There are special racing DB killer developed by us for the exhaust for more sound than series and also more power (because the original DB killer is quite too). For a sound as you want it and still have a DB killer installed, making it look completely legal. See accessories in this item description. The original DB-killers are also attached with a spot weld at the factory. To be able to remove the DB-Killer, this spot weld must be milled away (then you can fix it einrach with a screw and quite simple one & remove). If you do not want to do this work yourself, you can also let us do it. See for it accessory article in this description "DB Killer removal".
Who wants to have the exhaust system coated in black ceramic, which can be done by us. For this, order the accessory article (in this description) exhaust ceramic coating in addition. After that, the mufflers are completely black (the IXIL logo is then also no longer visible).
IXIL StreetTwin
CB11151
/ RS600
€566.95*
IXIL stainless steel slip-on exhaust for Street Twin. With E-number & removable DB-killer.
Euro 5 models from 2021: The exhaust also fits these models. However, it is NOT homologated for the Euro5 models (i.e. the model is behind the E-number that is on the exhaust is not deposited with).
A really nice short muffler that provides a really sporty line. The exhaust provides in addition to the sporty short optics also for the suitably pithy sound, which must have a 2-cylinder. Really nice muffled & bassy.
There are special racing DB killer developed by us for the exhaust for more sound than series and also more power (because the original DB killer is quite too). For a sound as you want it and still have a DB killer installed, making it look completely legal. See accessories in this item description.The original DB-killers are also attached with a spot weld at the factory. To be able to remove the DB-killer, this spot weld must be milled away (then you can fix it einrach with a screw and quite simple one & remove). If you don't want to do this work yourself, we can do it for you. See for it accessory article in this description "DB Killer removal".
Who wants to have the exhaust system coated in black ceramic, which can be done by us. For this, order the accessory article (in this description) exhaust ceramic coating in addition. After that, the mufflers are completely black (the IXIL logo is then also no longer visible).
Zard Street Twin Low
CB11096M
/ RS600
From
€1,054.00*
The Zard Short exhaust system for the Street Twin / Street Cup is probably the shortest exhaust on the market. It runs directly under the engine and ensures that the entire rear wheel remains clear.
Completely made of stainless steel with ABE (road approval), it fits on the original manifold and is a plug & play replacement for the original rear silencer.
The Zard Short exhaust is a visually very nice short & crisp exhaust in a classic design that fits perfectly to the Street Twin / Cup. In terms of sound, the Zard exhaust system gives you a beautifully rich and muffled sound. The workmanship of the exhaust system is very high quality in the classic Zard manner.
In order to be able to remove the DB-Killer from the exhaust system, a welding point that is difficult to access must be drilled out and milled away. As this takes about half an hour of work, we have to charge extra for this.If you would like to have this done, you must order the additional item "DB-Killer removal Zard exhaust CB11514" (see accessories in this description)
There are special racing DB-killers developed by us for the exhaust for more sound than standard and also more power (as the original DB-killer is quite closed). For the sound you want. See accessories in this article description.
For Swiss customers, the exhausts can be supplied with a declaration of suitability.
Zard Bottle for Bonneville
CB11098M
/ RS600
From
€845.00*
Beautiful classic exhaust system for Bonneville with ABE for T120. Fits to the T120 & T100 (for the Euro 5 models year of construction 2021 but currently still without ABE).
So you have to look for an exhaust for a classic English motorcycle (Bottle Design just do not have to say more ...)
Beautiful dull sound, convince yourself. Sound video
All stainless steel with ABE fits the original manifold.
Black Mainflood for Bonnie
CB10909M
/ RS600
From
€465.00*
Black coated original Triumph manifold for Bonneville T120 & T100.
Manifold is identical to the original in black coated.
Remus Stainless Steel Exhaust Bonneville T120
CB10869.1M
/ RS600
From
€750.00*
A very high-quality and stylish stainless steel exhaust from Remus, suitable for the water-cooled Bonnevielle T120. Clearly slimmer, shorter & more beautiful than the original exhaust from Vance & Hines. The exhaust is with E number & removable DB killer. The exhaust can be absolutely socially compatible even without DB-Killer drive. Due to the special fastening technology of the company Remus, a dismantled DB killer is usually not visible (Remus does not screw the DB killer, but attaches it with a Segering). The exhaust does not only sound better but also brings more power and torque (see performance curve). There are special Racing-DB kills developed by us for the exhaust for more sound as a series and also more power (since the original DB-Killer is quite too). For a sound like you want. See accessories in this product description.
From now on all Remus exhaust systems will be delivered with logo, see the last two pictures.
HBS 705 for T120 & T100
CB11084.1M
/ RS610
From
€699.00*
Classic Silencer from England by Norman Hyde for Triumph Bonneville T100 & T120.
The Norman Hyde systems have a very nice sound. Really nice muffled & bassy. If the sound is too loud with the completely open exhaust system, we also offer extra DB-killers, which we have developed for the Norman Hyde exhaust systems. The exhaust insert can be found under the accessories below this product description.
The exhausts are nice and close to the bike and are a good deal shorter than the original. Classic bottle design as it must be on an English motorcycle. The exhausts are made of steel chrome plated, which rounds off the classic look skillfully.
Who would like to have the exhaust system in black, which can be ordered on request & for an additional charge from us.
H-Bomb Exhaust System
CB12422M
/ RS620
From
€939.95*
Stainless steel complete exhaust system in short slash cut design.
This exhaust system replaces the complete exhaust system on your motorcycle (including manifold & cat box).
The H-Bomb exhaust system has an indifference pipe (which connects both manifold sides together), this provides more power & torque.The exhaust system is not just an empty pipe, there is a reasonable muffling system with perforated pipes & demmwollle installed, which makes for a very nice and muffled sound.