Fitting clamp without mirror thread Triumph Milled
€39.95*
Pick your accessory
from €79.94*
from €154.00*
from €64.90*
from €190.00*
€156.00*
€129.00*
€99.00*
€129.00*
| Product number: | CB12228 |
| item number: | 700493-F22 |
Product information "Fitting clamp without mirror thread Triumph Milled"
This CNC machined aluminum clamp replaces the original armature clamps. Fits all for all Triumph models with 22mm handlebars.
This makes sense when you convert the motorcycles to handlebar end mirrors, because otherwise you look at the open mirror thread of the original clamp.
In addition, the clamps make optically also really what her through their high-quality surface and the milled T - logo. Of course, this is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time.
The adapters are black anodized & in the follow-up, the T - logo is milled again. The clamps look very classy on the handlebars.
The adapters are sold individually.
| Models Triumph AC until 2015: |
|
|---|---|
| Triumph LC models from 2016: |
|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
|---|---|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
|
0
0
0
0
There aren't any asked questions yet.
Zubehörartikel
Bar End Mirror Clubman
CB11026M / 3
€79.94*
Clubman bar end mirror
100 mm diameter with E-number.
The mirror fits left & right. You can mount the mirror on 22 mm & 1" handlebars. If you do not want to push the fittings further inwards, then there are also matching handlebar extensions as end weights for the mirrors.
Rizoma Eccentrico Mirror Triumph LC
CB11333M / 2
€154.00*
The Rizoma Eccentrico handlebar end clamp mirror is the classic among the handlebar end mirrors. WITH E-number. A glare-reduced Convex mirror glass is used to ensure the best possible visibility. A mirror of the highest quality due to state-of-the-art manufacturing, but which nestles wonderfully into the classic design of the Triumph Modern-Classic models.
The scope of delivery includes suitable adapters for mounting the mirrors on the original handlebars of the Bonneville, Thruxton, Scrambler & SpeedTwin (For a neat handlebar finish, we still recommend the end cap "Rizoma Cap" to order. You will find under the accessories in this description).
For mounting on the StreetTwin an additional adapter (CB11326) is needed (see accessories). If you mount an accessory handlebar, you can also just push the fittings a bit further inwards and clamp the mirror directly over the handlebar or use the mirror end weights (see accessories).
The price is for one mirror.
The mirror arm is now always black (the pictures where the mirror is installed are old. So there is no longer the mirror).
Handlebar end mirror
CB00555M / 600
From
€64.90*
Handlebar end mirror made of aluminium with final weight against vibrations CNC milled very noble. End weights & mirror housings are available in silver or black. 60 or 75 mm mirror glass diameter. Fits 22 mm handlebars and 1" handlebars.
The internal thread of the original handlebar must be removed or drilled out (only possible with air-cooled models).Otherwise an accessory handlebar must be installed, which is hollow from the inside.
Rizoma SPY-ARM Mirror Triumph LC
CB11335M / 2
From
€190.00*
The Rizoma SPY-ARM handlebar end clamp mirror combines modern quality with a classic & minimalist design. WITH E-number in the Ø94.5 variant. A glare-reduced Convex mirror glass is used to ensure the best possible view. This mirror has the Atention as eye-catcher by its design on the motorcycle to attract attention, but to do this by its minimalistic design only to a small extent.The scope of delivery includes a handlebar extension, over which the mirror is clamped. This is also a perfect finish on the mirror. The fittings do not have to be pushed further inwards.Does not fit Bonnie & Thruxton 1200 (only with handlebar accessories). Adapter for mounting on Thruxton R, Scrambler 1200 & SpeedTwin is included. For the StreetTwin an additional adapter (CB11326) must be ordered (see accessories). If you have mounted a handlebar accessory, you need the Rizoma handlebar mirror adapter uni. for mounting (see accessories).The price is for a mirror.
Rizoma Spirit RS Mirror Triumph
CB11337 / 2
€156.00*
Colour:
Silver
The Rizoma Spirit RS handlebar mirrors have a new design, but their classic shape fits perfectly into the classic bikes .. WITH E-number. A blend-reduced Convex mirror glass is used to ensure the best possible visibility. A mirror of the highest quality from billet aluminum.
This mirror is not to be used with an original handlebars. Only in conjunction with an accessory handlebars. For mounting on an accessory handlebar, the additional bracket LP200B is required (see accessories in this description).
The price is for a mirror.
Motogadget M.View Sport 130 Mirror
CB11624 / 0
€129.00*
Motogadget M.View Sport 130 handlebar ends mirror in a sporty angular design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View Spy Mirror
CB11626 / 0
€99.00*
Motogadget M.View Spy handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
Motogadget M.View Sport 60
CB11835 / 0
€129.00*
Motogadget M.View Sport handlebar end mirror WITH E-number. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.
Dimensions:Width of mirror body: 122 mm Height of mirror body: 83 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 128 g
The size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles. Price per piece.
Motogadget M.View Street Mirror
CB11837 / 0
€99.00*
Motogadget M.View Street handlebar end mirror with E-number in classic, round design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a brand new mirror technology! They come completely without mirror glass. The special thing about this mirror is the patented mirror surface, which is directly on the metal of the body. The aluminium itself is the mirror surface! This allows a weightless design without edge and frame and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted either upright or down on the handlebars (fits left & right). The mirror arm is also swiveling, which makes it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror clamps are made in the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge-free transitions when you mount everything
Dimensions:Diameter of mirror body: 96 mm Thickness of mirror body without ball head: 4.2 mm length of the mirror arm: 60 mm diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 10 mm Weight: 125 g
Price per unit.
Triumph handlebar mirror Classic
CB11940 / 600
€239.00*
Original Triumph round handlebar end mirror pair with E-number, which can be mounted on both sides of the handlebars.The black mirrors have a nice contrast milling all around.Can be mounted Plug & Play on the original handlebars of the watercooled Triumphs.If you want to mount the mirrors on an accessory handlebar or on an aircooled Triumph, you have to work on the plastic adapter rings easily (cutting off a leading nose takes 2-3 minutes).Flat handlebar end caps for a nice handlebar end must be ordered separately.
Handlebar clamp round
CB11165M / 3
From
€89.90*
Handlebar mirror round 75mm diameter, which is simply clamped around the handlebar or on a steering wheel (if you do not want to push the dashboards inwards) see accessories in this description .. Quite expensive but really beautiful detail processing and multiple adjustment possibilities. The expert immediately sees the elaborate processing and the great surfaces. It does not get any better. Not too small, (105x58 mm) so you can see something. Available in black and silver. INDIVIDUALLY
Fits to 1" Handelbares.
Optically as technically a very good solution! Because of the many possibilities of adjusting the mirror you can really see very well.
LSL handlebar ends mirror retro rigid arm
CB12024.1M / 8
From
€64.95*
The LSL Retro mirror stands for classic, high-quality design.The mirror is adjustable by a, in the mirror arm integrated ball joint to ensure a good view to the rear.
The aluminum housing and the arms are glass bead blasted before anodizing, which provides a very noble and slightly matte surface.
The mirror can be mounted directly around a handlebar (both 22mm and 1" clamped, for this the fittings must be pushed a bit inwards) or in combination with the perfectly matching Retro end weights (our recommendation). The retro end weights, which also serve as a perfect handlebar end, can be found under the accessories in this description.The mirrors can be mounted both upwards and downwards.
Dimensions: A Width head: 100 mm B Height head: 100 mm C Total width: 45 mm D Total height: 185 mm Stem length: 120 mm (to fastening) Mounting screw: M4X16Weight: 208 g
Scope of delivery: 1 piece incl. 1 and 7/8 inch adapter
Rizoma Reverse Retro Mirror Triumph LC
CB11334M / 2
From
€99.00*
The Rizoma Reverse Retro handlebar end clamp mirror is of the highest quality. Made of billet aluminum using the 3D process. A glare-reduced Convex mirror glass is used to ensure the best possible visibility. A design that captivates with its classic shape, yet doesn't stand out too much due to its small size.
The scope of delivery includes suitable adapters for mounting the mirrors on the original handlebars of the Bonneville, Thruxton, Scrambler & SpeedTwin (For a neat handlebar finish, we still recommend the end cap "Rizoma Cap" to order. You will find under the accessories in this description).
The scope of delivery includes suitable adapters for mounting the mirrors on the original handlebars of the Bonneville, Thruxton, Scrambler & SpeedTwin (For a clean handlebar end, we recommend ordering the end cap "Rizoma Cap" to. You will find under the accessories in this description).
For mounting on the StreetTwin an additional adapter (CB11326) is needed (see accessories). If you mount an accessory handlebar, you can also just push the fittings a bit further inwards and clamp the mirror directly over the handlebar or use the mirror end weights (see accessories).
The price is for one mirror.
Handlebar mirrors oval
CB00556M / 600
From
€84.89*
Handlebar end mirror oval made of aluminium, for accessory handlebars or boring out the thread in the original handlebar. Quite expensive, but really beautiful detail processing and multiple adjustment possibilities. The connoisseur sees immediately the complex processing and the great surfaces. It couldn't be better. not too small, (105x58 mm) so you can see something. The mirrors are sold separately. Is only mounted on accessories handlebars (which are hollow from the inside).
Rizoma Spy-R Mirror Triumph LC
CB11336M / 2
From
€158.00*
The Rizoma SPY-R handlebar end mirror combines state-of-the-art quality & manufacturing with a classic & minimalist design. WITH E-number in the Ø 94,5 version. A glare-reduced Convex mirror glass is used to ensure the best possible visibility. This mirror has the intention to stand out as an eye-catcher by its design on the motorcycle, but to do this only to a small extent by its minimalist design. Especially the small version in Ø 57 mm looks very nice and is hardly noticeable (unfortunately without TÜV).
Fits only on the original handlebars of the StreetTwin (on all others only with accessory handlebars or stub). For this you need the adapter (CB11327) (see accessories). If you mount an accessory handlebar, you need Rizoma handlebar mirror adapter uni. (see accessories).
The price is for one mirror.
Motogadget M.View Road Mirror
CB11623 / 0
€99.00*
Motogadget M.View Road handlebar ends mirror in a sporty classic oval design(road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 114 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View - Classic 130 Mirror
CB11625 / 0
€99.00*
Motogadget M.View Classic 130 handlebar ends mirror in classic round design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view Classic 130 corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View Blade Mirror - FLIP
CB11680 / 1
€129.00*
Motogadget M.View Blade FLIP handlebar ends. The top sporty in tiny design (such a small and filigree mirror, in which you can still see quite well, we never had in our program) for 22 mm & 1" handlebars.
The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally.
These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.Dimensions:Width of mirror body: 100 mmHeight of mirror body: 60 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmWeight: 94 gThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.Translated with www.DeepL.com/Translator
Motogadget M.View Cruise Mirror
CB11836 / 0
€99.00*
Motogadget M.View Cruise handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.
Dimensions:Width of mirror body: 114 mm Height of mirror body: 80 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 125 g
Price per piece.
Rizoma Revers Radial Mirror Triumph LC
CB11870M / 2
From
€168.00*
The Rizoma Revers Radial handlebar end clamp mirror, captivates by its modern design, which nevertheless looks classical by its elegant drop shape. WITH E-number. A glare-reduced Convex mirror glass is used to ensure the best possible visibility. A mirror of the highest quality due to modern production. As if from one piece, the mirror nestles into the classic design of your Triumph.Rizoma is not just an accessory manufacturer, but THE manufacturer. The surface of Rizoma milled parts is unique and impresses with its filigree milling lines.
Included in delivery are suitable adapters for mounting the mirrors on the original handlebars of the Bonneville, Thruxton, Scrambler & SpeedTwin. For a perfect handlebar finish we recommend to order the flat Rizoma end weight for the bikes (see accessories in this description).For mounting on the StreetTwin an additional adapter is required (see accessories in this description). If you mount an accessory handlebar, you can also simply push the fittings a little further inwards and clamp the mirror directly over the handlebar or use the mirror end weights (see accessories in this description).If the mirror is clamped directly over the handlebars, we recommend ordering the flat handlebar end cap from Rizoma in addition to the mirror to have a clean and perfect handlebar end (see accessories in this description).
The price is for one mirror.
Handlebar clamp oval
CB11164M / 600
From
€84.89*
Handlebar mirror oval, which is simply clamped around the handlebar or on a steering wheel (if you do not want to push the dashboards inwards) see accessories in this description .. Quite expensive but really beautiful detail processing and multiple adjustment possibilities. The expert immediately sees the elaborate processing and the great surfaces. It does not get any better. Not too small, (105x58 mm) so you can see something. Available in black and silver. INDIVIDUALLY
Fits to 1" Handelbares.
Optically as technically a very good solution! Because of the many possibilities of adjusting the mirror you can really see very well.
LSL Barend Retro Mirror - vario
CB12022.1M / 8
From
€64.95*
The LSL Retro mirror stands for classic, high-quality design combined with state-of-the-art functionality. With E-Certification Functionality means in the case of the retro mirror that the mirror glass is adjustable by a ball joint integrated in the mirror arm to provide an optimal view to the rear. In addition, the mirror arm can also be tilted inward, outward or straight down. So you get on the one hand an even better view to the rear to the other hand, this looks visually even better, because the mirror is not just straight up or down.
The aluminum housing as well as the arms are blasted before anodizing glass bead, which provides a very noble and slightly matte surface.
The mirror can be mounted directly around a handlebar (both 22mm and 1" clamped, for this the fittings must be pushed a bit inward) or in combination with the perfectly matching retro end weights (our recommendation). The Retro end weights, which also serve as a perfect handlebar end, can be found under the accessory items in this description.
Dimensions: A Width head: 100 mm B Height head: 100 mm C Total width: 76.5 mm D Total height: 165 mm Stem length: 120 mm Mounting screw: M5
Scope of delivery: 1 piece incl. 1 and 7/8 inch adapter
In black only in KW35 available again