Wiring harness accessories taillight & turn signal - LC

Side license plate holder including LED license plate light.Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases. Without expert opinion. From our experience, however, there are no problems with the green ones. Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm   Tips for complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard New blinker brackets must also be fitted if the original mudguard is removed. The accessories described can all be found under accessories in this product description.

Classicbike-Raisch LED stripe tail suitable for all Triumph Thruxton 1200 models. Street legal! The LED Stripe rear is the most noble & elegant rear for Thruxton, which we lead in our assortment.The rear of your 1200 Thruxton is given a minimalist & modern look with this kit, through the filigree milling bracket and the modern LED strip & completely legal! The taillight including brake light is with E-number and the tail complies with all StvO standards. Here nothing needs to be registered with the TÜV. Simply attach & enjoy. The LED bracket milled from aluminum is specially designed for the original Triumph hump seat of the Thruxton 1200 models and fits absolutely perfectly to this seat.Even with the original 2 man seat, the LED tail looks absolutely awesome! The bracket for the LED strip is milled from an aluminum block in Germany, then glass bead blasted and then anodized deep black. This results in an incredibly noble Black Pearl surface.The LED strip (with E-number) is then glued into the milled bracket. Thus, the part looks like from a single cast. Included in the kit is an aluminum underbody shell, which replaces the original plastic shell. The underside shell serves as a splash guard and on the other hand, some electronic parts are attached to it, just like on the original one. The kit includes all materials, such as screws, cable ties, heat shrink tubing, sleeves, etc., as well as a very detailed step by step instructions to ensure an easy & problem-free installation. Below the description, you can buy accessories such as turn signals, discounted as a set together. License plate holder: The kit is delivered WITHOUT a license plate holder. Since the kit with a central as well as with a lateral license plate holder simply looks cool! Our recommendations:Variant 1: License plate holder rearWeck Thruxton 1200 / This holder is mounted centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant does NOT need to be registered). This is the holder that is also mounted on some product photos.Variant 2: Side license plate holder. Here we offer 3 unteschiedliche. 2 pieces that sit on the left side (on the swingarm / or on the shock) and one that is attached to the swingarm but sits centrally behind the rear wheel. Further down in this description you can order a license plate holder in the bundle. In the bundle you are automatically granted a discount on the two holders. Turn signal: In the milling bracket is on both sides of an 8 hole, which allows any turn signal with an M8 thread to mount. The turn signal is held by a grub screw, which is included.Who does not want to mount a turn signal on the bracket (because he would prefer to have them, for example, inside the shock), which can order the turn signal plugs (further down in this description) to. These then serve as blind plugs for the turn signal hole. Further down in this description, you can order all, to the rear matching turn signals, from our range in the bundle. Our recommendation are the Motogadget Tens turn signals (these are also installed in the product photos).Note to the Kellermann Atto turn signals: Who wants to install these on the bracket, which still needs the Kellermann M5 to M8 adapter to it.In the bundle you are automatically granted a discount of 10% on all turn signals. Accessories: Classicbike-Raisch recommends a plug & play cable set for easier installation. This can simply be connected to the original wiring harness and must then only be wired to the taillight and turn signals (so nothing has to be cut or soldered to the original wiring harness).For all those who want to be 100% legal on the road, there is still a reflector in the accessories.To mount the license plate, we recommend the license plate screw set. All parts can be ordered below in the description.