Pico LED Turn Signal CB12469 / RS0
A PAIR Pico aluminum LED turn signals from the brand Motone from England. With E-number & road approval. The very high quality Motone turn signals are made of a full metal housing and have an Osram SMD LED insert. The Pico turn signals are the only turn signals in our range, where the cables are sheathed with a fabric hose and also have a sleeve included with which the nut / thread is covered. This is visually and haptically really nice! The turn signals have an M8 thread & have a 3.9mm Japan plug at the cable ends. Under the accessories in this description you will find model specific turn signal plugs for your motorcycle. The Pico turn signals have a classic bullet design and are the absolute perfect size for our Modern Classic bikes. They are nice and small, but not too tiny. Dimensions: W 18 x H 44 x D 25.5 mm

€139.95*
Motogadget Mo.Blaze Tens 1 & 4 Indicator CB12070.2M / RS0
The new Motogadget mo.blaze tens1 & 4 are currently the smallest road legal turn signals in the world. Due to the cleverly chosen design, the turn signals look chic and like a real turn signal despite their tiny size. Thus, they look really good on almost every motorcycle or, depending on their position, they stand out as good as not at all.Particularly advantageous with these turn signals is that they have an M8 thread despite their small size, which makes it possible to mount the turn signal on just about any bracket, adapter & tail from our range. Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely no longer to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The mounted turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC milled and available in black anodized or mirror polished finish. In addition, the turn signal is optionally available as a normal turn signal and as a version with position light. The turn signals with position light are ONLY suitable for the front. These shine permanently white and ensure that you are better seen when driving behind. The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed. Specifications: Total length with thread 29 mm Leangth without thread 11 mm Largest diameter 11 mm Wire leangth ca. 110 cm Weigth with wire  ca. 20 g Mounting M8 Gewindebolzen Power consumption ca. 1 Watt

From €59.00*
Rizoma IRIDE Indicators CB11270.3 / RS0
Colour: Chrome | Design: With Postion Light
Beautiful classic turn signals from Billet aluminum from Rizoma in all top top quality. The turn signals are very bright thanks to modern LED technology. The turn signals are with E-number. The price is for a single turn signal. Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals. If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description). The indicators are sold individually.

Variants from €72.00*
€92.00*
Rizoma CLUB Indicators CB11272M / RS0
Rizoma "CLUB" Mini turn signals made of billet aluminium in highest top quality. This is what we modern classic fans want! Modern small turn signals in a classic round design.The turn signals shine very brightly by modern LED technology and are seen so despite their small size very well.The turn signals are E-numbered and therefore road legal. The price is for a single turn signal.Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.The turn signals are optionally available with white position light (only for front!) or without. The indicators are sold individually.A resistor is included in the scope of delivery.

From €82.00*
Rizoma LEGGERA Indicators CB11274.2M / RS0
Rizoma "LEGGERA" Mini Blinker made of billet aluminum in top quality. Minimalist blinkers for anyone who wants to have them as inconspicuous as possible, but do not want to forego safety and a noble workmanship. The turn signals are very bright thanks to modern LED technology. The turn signals are with E-number. The price is for a single turn signal. Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals. If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description). The indicators are sold individually.

From €86.00*
Rizoma VISION Indicators CB11734.1M / RS0
Rizoma "VISION" mini turn signals made of billet aluminium in highest top quality. The LED indicators have a sequential flashing function. This means that the individual LED´s go one after the other on / build up as you know it from the most modern cars (see product video).The turn signals are E-numbered and therefore road legal. The price is for a single turn signal.Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.A resistor is included in the scope of delivery. The indicators are sold individually.

From €97.00*
Motogadget m.blaze Pin Indicators CB11047.1M / RS1
The new pin sets new standards for surface-mounted indicators with power LED technology.Its tiny dimensions and reduced design almost make it disappear on the vehicle. As soon as it lights up, IntensiLED® Technology makes it extremely bright and definitely impossible to miss.In addition, the patented TranzLight® Technology (TLT) with a large beam angle ensures optimum visibility and safety.The indicator has ECE approval as front and rear direction indicator. The aluminium housing is CNC-turned and available in black anodised or highly polished finish. The Bilnker are sold individually.

From €49.00*
Kellermann Atto Indicators CB11500M / RS2
Kellermann Atto, the smallest turn signal available on the market! And that with E-number (so legal for front & back)! Perfect for anyone who just wants the turn signals to be as unobtrusive as possible on the bike. Especially in connection with the Atto rear light you get in the rear area an incredibly clean look. (The tail light can be found under accessories in this description). On the second picture, we have installed the Atto blinker on the handlebars. This is possible with all Triumph models that have a 1 inch armature with a hole to mount the mirror. You have to convert the bike to handlebar mirrors (if not already from the factory like e.g. the bobbers), order a turn signal extension, and put a black washer on top (you can get it from us). Never was a turn signal smaller. For comparison: the light area of ​​the Atto® / Atto® Dark fits four times on a 1 cent coin! This consistent reduction opens up completely new design options on the motorcycle. Due to the Atto® / Atto® Dark, the "Blinker" component on the motorcycle can virtually disappear visually. This turn signal only stands out when it really needs to. When it flashes, it shines with an intensity that has made Kellermann's products legendary and the company a trendsetter time and again. The Atto® / Atto® Dark offers maximum brightness with minimal size, in short: it is "sensationally small - spectacularly bright". We recommend not to look directly into the light of this small power plant for too long! An optimized light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology **, the new EXtranz® - Extreme Optical Transparency Technology is used here for the first time Combination only possible. Since the Atto turn signals only have an M5 thread and almost all holders and indicator mounts are designed for M8 threads, there is a suitable adapter for this (see accessory article in this description). The price is for one turn signal

From €59.95*
Forkcover including turn signals for Bobber CB11418M / RS2
The original, shiny and slightly narrow stanchions are perfectly concealed by this teif black anodized fork cover. Because of this, it seems as if a fat fork is installed in the motorcycle. You also get a clean black look. The covers are supplied with 2 mini LED turn signals (with E-number), which are mounted directly on the cover (including resistors). Then you forget the huge original turn signals, and you get a really nice front on the bobber.

From €189.00*
Kellermann Bullet Turn Signals CB10574M / RS2
Kellermann Bullet 1000 is milled from the solid. Aluminum in noble form and finish, uncompromising quality. The classic cartridge shape was reinterpreted and exactly in the right size, not too small, not too big. Glass diameter: 36.5mm, depth 50mm. Flowing forms and perfect transitions. The view remains on this blinker and glides along at the same time. The prices are per piece. Suitable flasher for connection to the original wiring harness.

From €89.95*
MotoIsm Type One Short Indicators CB12548M / RS10
Plug & play LED indicators for all water-cooled Triumph models – perfect fit and modern design Upgrade your Triumph modern classic motorcycle with the high-quality plug & play LED indicators from MotoIsm. These 3D-printed indicators, specially developed for water-cooled Triumph models, come with a matching adapter that fits seamlessly onto your Triumph's original mounts. No more fiddly fitting – just plug & play! Optionally as a standard turn signal or 3-in-1 combination Available as classic turn signals or as an innovative 3-in-1 turn signal/rear light/brake light combination that combines everything in a compact housing. With an E-number and street legal, the 3-in-1 turn signals not only offer style but also safety, as a separate rear light is no longer required. High-quality materials and first-class workmanship Made from durable carbon fiber-reinforced plastic and with a smooth, pleasant feel, the Type-One Short Turn Signals from MotoIsm are a real eye-catcher. The minimalist design replaces the often bulky OEM turn signals and elegantly integrates into the look of your motorcycle. MotoIsm is known for producing the highest quality 3D-printed motorcycle parts, Made in Germany. Easy assembly – no soldering or cutting of connectors MotoIsm has placed particular emphasis on uncomplicated installation: the optional adapter cables allow direct connection to your motorcycle's wiring harness without the need for cutting or soldering. These adapter cables contain integrated resistors that ensure the flashing frequency is correct. This saves you the hassle of trial and error and lets you get started right away. Classicbike-Raisch tip:Order the adapter cables at the same time to ensure a stress-free and quick installation. You will find them in the accessories section below the product description.    

From €119.90*
Little No. One indicators CB11424M / RS10
Tiny LED turn signals from a CNC-milled aluminum housing in deep black anodized (with E-number).The turn signals can be attached to all flat surfaces on the motorcycle (minimum size of the surface: approx. 11x26mm) and are simply glued to the motorcycle with a special adhesive (supplied). Perfect for everyone who just wants to have his turn signals mounted as inconspicuously and discreetly as possible. No drilling or screwing is necessary.The price is for one pair. Please choose if the turn signals should be for front or for rear (because there are different numbers of LED´s)

From €99.90*
MotoIsm Fork cover - 2-piece - with indicators - LC CB12676M / RS20
New from MotoIsm - the two-piece fork covers with integrated indicators. These innovative fork covers are very quick & easy to fit. Thanks to the two-part design of the covers, they can simply be slipped around the fork and fixed in place with the supplied cable ties (which are on the inside and not visible). The fork does not have to be removed, it couldn't be easier. The covers can be fitted in no time at all. LED SMD indicators with E-number are integrated in the covers. This kills two birds with one stone (inconspicuously mounted indicators that are still clearly visible from the front and a more attractive fork). The covers from MotoIsm (Made in Germany) are manufactured from high-quality, carbon fiber-reinforced plastic using a 3D printing process. MotoIsm produces the highest quality 3D-printed parts on the motorcycle market. The surface has a very nice & smooth feel. The matching blinker plugs including the matching resistors can be ordered directly: Matching blinker plugs with integrated resistors are available for the Motoism indicators. These guarantee a problem-free connection (simply plug the connector into the original wiring harness) and a suitable flashing frequency. These plugs can be found under accessories in this product description.   No disassembly of the fork or upper triple clamp necessary Innovative, two-part SEAMLESS design  Ultra-bright thanks to LED technology - 5 SMDs With E-mark - Street legal Cable routing inside the cover Separating joint invisible from the side and front Special cable ties with particularly flat design are guided in the component High-quality paint finish in matt black Headlight brackets can be easily fitted to the covers

From €229.90*
MotoIsm Fork Clamps - LED Turn Signal CB12550M / RS600
Gebl clamps with integrated LED turn signals.These clamps are perfect for a custom conversion, where it can not find a good position to install conventional turn signals.The two-piece fork clamps must be simply put over the fork and fixed with two screws for installation. The wiring runs integrated in the clamp and provides a tidy and clean look. There are the clamps in 3 different dimensions (Please measure your fork standpipe and order the correct diameter measure), which you can choose in the selection. The turn signals have an E-mark and is approved as a front turn signal. The clamps from MotoIsm (Made in Germany) are made of a high quality carbon fiber reinforced plastic.   Classicbike-Raisch mounting tips & resistors: The company MotoIsm really makes an effort to make the connection of their indicators as simple and customer-friendly as possible.There are adapter cables from Motogadget with which you can connect their indicators directly to the wiring harness (without cutting/soldering plugs or similar). These adapter cables also have built-in resistors which ensure that your R9T has the correct flashing frequency. So there's no need for tedious trial and error. Our recommendation is to order one of these adapters at the same time! You can find the adapters under accessories in this product description.

From €159.90*
Frame tube LED turn signal CB12404 / RS600
A pair of round LED turn signals that fits exactly in the rear frame tube of your Triumph. The turn signals can be inserted into the tubes and then still need to be glued with silicone. Cleaner and more inconspicuous you can not hide the turn signals in the rear area of the motorcycle. Dimensions of the turn signals (see also picture) A1: 13 mm A2: 9 mm D1: 22 mmD2: 20 mmThreaded bolt: M8, length: 12 mm Product Information:Made of a black aluminum ring with tinted glass. In this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, allowing for an extremely small size. The outer ring, on the other hand, is made of the new COB technology (Chip On Board). Due to the new LED chip embedding for high-power LEDs, a very high luminance is achieved with currently the best possible efficiency and service life. In addition, higher light values can be achieved than with conventional LEDs. This module is supplied with a black anodized aluminum ring that fits over the base body.

€84.95*
Mini Bullet Indicators CB12307 / RS600
A pair of mini LED turn signals with aluminum housing. The bullet turn signals have a beautiful classic shape, are very nice small and have an excellent price - performance ratio. The turn signals have a modern SMD LED technology (12V2,7W) - very high quality metal housing- E-mark- total length: 37mm- total width: 37mm- Turn signal head: 22mm Ø

€109.95*
Kellermann Micro CB11162M / RS600
Kellermann Micro LED Blinker in black. As used by Kellermann in the highest quality. The turn signals are available as simple turn signals & as turn signal / taillight combination. At the turn signal / taillight combination is integrated into the turn signal taillight, turn signals & brake light. Both versions are of course with E-number. The price is for a turn signal.

From €69.95*
Drops Alu Turn Signals CB11076.2M / RS600
This is quality. The highest quality indicators we have ever seen. Beautiful, drop-shaped indicators in just the right size for the style; not too small and not too big. The turn signal housing is completely machined from aluminum (diameter 42 mm, length 66 mm). The blinker arm & threads are made of stainless steel for even more durability. The indicators are supplied with two different blinker lenses (see photo), which can be easily replaced. Indicators are with E-number. Price is for one pair. Matching blinker plugs for connection to the original wiring harness can be found under accessories in the description here. There are also blinker holders for mounting on the standpipes (see also accessories). Does not work Plug&Play on motorcycles that are factory-fitted with LED indicators and where the indicator frequency cannot be changed on the vehicle. Note / tip: Accessory indicators are always supplied by the manufacturers with a universal plug or without a plug at all. If you simply want to connect the indicators to the original wiring harness of your motorcycle, you can also order the appropriate blinker plugs for your motorcycle (you will find the plugs under the accessory items in this description).

From €99.95*
Triumph Bullet LED turn signals CB10779M / RS600
Triumph Bullet LED turn signal made of aluminium. The LED turn signals from the Triumph original accessories, fit perfectly to the original recording on the motorcycle. In addition, the turn signals are equipped with the appropriate plugs to connect them directly to the wiring harness of the motorcycle. Changing the turn signals is very quick and easy.Please choose in the selection for which model the indicators should be and whether for front or rear. We only have the variant with the short indicator arms in our program (because they look much better optically). On request we can also order the turn signals with the long arm.

From €159.00*
Bullig Indicators CB00061 / RS600
Turn signal Bullit metal aluminum polished pair. Classic, inexpensive and made of metal with E-number. For all customers who like it really classic, these are the right turn signals. They look really old school. Dimensions:A: 47.5 mmB: 67 mmC: 77 mm For easier connection, we still recommend a set of turn signal plugs to order. Attention: On motorcycles that already have LED turn signals installed from the factory, it is not possible to replace them with normal turn signals on all models without any problems. Best to ask us in advance whether it works with your model or not. The turn signals are sold as a pair.

€49.90*
Blaze LED Turn signals CB00093 / RS600
Highsider aluminum LED turn signal pair in a modern discreet design.Modern LED technology ensures that the turn signals shine really bright and you are well seen. Dimensions:A: approx. 40 mmB: approx. 55 mmC: approx. 20 mmD: 19 mm Threaded bolt M8 x 1.25 mm, length: approx. 20 mm Note / Tip: Accessories turn signals are always supplied by the manufacturers with universal plugs or completely without plugs. Who wants to connect the turn signals simply to the original wiring harness of his motorcycle, which can still order suitable turn signal plugs for his motorcycle (the plugs can be found under the accessories in this description).

€79.94*
LED Turn signals Old Style CB00113 / RS600
LED Blinker OS Style Pair. Alu housing black. 20mm housing. Stitch length 20mm. Decent unexpected look. Not too small and not too big. Just matching our classic twins. Super bright !!

€49.95*
Old Style Blinker CB00064M / RS610
Turn signal Old Style. Look of the seventies! Heavy duty quality made of solid thick aluminum. This has something in your hand. It does not get more classic than this! These turn signals are just right for those who want to convert their machine really classic. The turn signals have a classic size and are not as small as the modern LED turn signals. Not everyone wants a turn signal that is so small that you can not see him virtually. Attention: For motorcycles that already have LED turn signals installed from the factory, it is not possible to replace them with normal turn signals on all without any problems. Best to ask us briefly in advance whether it works with your model or not. We recommend to order a pair of turn signal plugs for easier installation. The price is for a pair.

From €64.90*