Classicbike-Raisch LED rear light, Plug & Play suitable for the original mudguard of your Triumph Scrambler 1200.With E-number (road legal). The Scrambler comes from the factory with a beautiful mudguard but unfortunately with a rear light that is much too large and not so beautiful. Because there are cut-outs and large holes for the original rear light on the original mudguard, it is not possible to simply fit an accessory rear light. That's why we at Classicbike-Raisch have developed an LED rear light that fits perfectly on the original mudguard of the Scrambler. It is significantly smaller than the original, has a beautifully classic, round shape and makes the rear area and the mudguard of the Scrambler look much more beautiful and harmonious. The LED unit is a modern SMD LED unit that shines very brightly and is clearly visible. The rear light is supplied with a matching vehicle plug. The rear light only needs to be replaced with the original one and plugged into the original wiring harness and you're done. The rear light housing is manufactured in Germany by our friends at MOTOISM. It is manufactured from high-quality, carbon fiber-reinforced plastic using a state-of-the-art 3D printing process. The surface is then smoothed and the rear light is given a satin finish.This results in a very beautiful and high-quality surface.   Classicbike-Raisch tip for a beautiful, complete rear conversion:The original, rather long license plate holder also ensures that the Scrambler does not have a nice rear end ex works. If you want a really nice and short rear end (as shown in the product pictures), we recommend installing our short license plate holder and small indicators. You can find the license plate holder under the accessories in this product description.

The Shorty Pro 2 LED mini taillight is extremely small and intended for installation, for example, a frame. Despite its minimal size, the taillight is with an E-number and legal. We have the taillight until now always (with the help of the welded housing) installed in the rear frame / round arch of motorcycles (see also mounted pictures). But of course it can also be installed in a fairing or similar. The matching weld-in housing to the Shorty tail light, you will find under the accessories in this description.   Dimensions: Width: 40 mm Height: 8,5 mm Depth: 13 mm Technical data: Yellow cable = driving light (+) Red cable = brake light (+) Black cable = ground (-)

Lucas Light tail light combination complete kit. The Lucas Light Kit is a nice classic turn signal tail light combination, which is screwed onto the original fender (but new holes must be drilled!). The original holes are then covered by the license plate). Tail light as well as turn signals are with E-number. Included in the kit is: Lucas taillight Drops aluminum turn signal Turn signal holder Cable set for turn signal & tail light Optionally, the kit is available in black (turn signal & taillight black) and silver (taillight & turn signal silver)

Twinton LED tail light, plug & play for the original Triumph Bobber mudguard. The tail light is attached to the same mounting points as the original tail light, which guarantees a quick and easy installation (no drilling necessary).The hole of the lower rear light mounting is closed with a nice cover, which is included in the delivery. In addition, the tail light already has a suitable plug to connect it directly to the wiring harness. The original central licence plate holder can no longer be fitted. We recommend fitting a side number plate holder to the Twinton tail light. You will find suitable licence plate holders under the accessories articles in this description. The housing of the rear light is manufactured using a selective laser sintering process. Afterwards, the housing is sanded several times, filled and then painted glossy black in several layers.The material is a high-strength nylon polyamide. The tail light is of course E-numbered.

This Triumph taillight replacement for the for various Triumph models allows to dismantle the original taillight and 3-1 turn signals (turn signals with integrated taillight to install). To get a nice solution (as on the product images), the Raisch turn signal adapter is needed (you can order below the description simply in the set to. This then allows all accessories 3-1 turn signals with M8 thread to mount.In addition, we also recommend the cable set for easier wiring to order (Attention for the Speed Twin Euro 5 models there is no cable set, these models must be wired manually). Matching turn signals to the set you can order with 10% discount, below the description in the set. Our recommendation for this set are the turn signals of the brand Rizoma, which fit perfectly. Tip Scrambler / Speed Twin 1200: To get a really cool and clean tail on these models, we recommend a short license plate holder to order (see accessories below the description). The aluminum plate with the Triumph emblem is supplied in silver.

Classicbike-Raisch LED stripe tail suitable for all Triumph Thruxton 1200 models. Street legal! The LED Stripe rear is the most noble & elegant rear for Thruxton, which we lead in our assortment.The rear of your 1200 Thruxton is given a minimalist & modern look with this kit, through the filigree milling bracket and the modern LED strip & completely legal! The taillight including brake light is with E-number and the tail complies with all StvO standards. Here nothing needs to be registered with the TÜV. Simply attach & enjoy. The LED bracket milled from aluminum is specially designed for the original Triumph hump seat of the Thruxton 1200 models and fits absolutely perfectly to this seat.Even with the original 2 man seat, the LED tail looks absolutely awesome! The bracket for the LED strip is milled from an aluminum block in Germany, then glass bead blasted and then anodized deep black. This results in an incredibly noble Black Pearl surface.The LED strip (with E-number) is then glued into the milled bracket. Thus, the part looks like from a single cast. Included in the kit is an aluminum underbody shell, which replaces the original plastic shell. The underside shell serves as a splash guard and on the other hand, some electronic parts are attached to it, just like on the original one. The kit includes all materials, such as screws, cable ties, heat shrink tubing, sleeves, etc., as well as a very detailed step by step instructions to ensure an easy & problem-free installation. Below the description, you can buy accessories such as turn signals, discounted as a set together. License plate holder: The kit is delivered WITHOUT a license plate holder. Since the kit with a central as well as with a lateral license plate holder simply looks cool! Our recommendations:Variant 1: License plate holder rearWeck Thruxton 1200 / This holder is mounted centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant does NOT need to be registered). This is the holder that is also mounted on some product photos.Variant 2: Side license plate holder. Here we offer 3 unteschiedliche. 2 pieces that sit on the left side (on the swingarm / or on the shock) and one that is attached to the swingarm but sits centrally behind the rear wheel. Further down in this description you can order a license plate holder in the bundle. In the bundle you are automatically granted a discount on the two holders. Turn signal: In the milling bracket is on both sides of an 8 hole, which allows any turn signal with an M8 thread to mount. The turn signal is held by a grub screw, which is included.Who does not want to mount a turn signal on the bracket (because he would prefer to have them, for example, inside the shock), which can order the turn signal plugs (further down in this description) to. These then serve as blind plugs for the turn signal hole. Further down in this description, you can order all, to the rear matching turn signals, from our range in the bundle. Our recommendation are the Motogadget Tens turn signals (these are also installed in the product photos).Note to the Kellermann Atto turn signals: Who wants to install these on the bracket, which still needs the Kellermann M5 to M8 adapter to it.In the bundle you are automatically granted a discount of 10% on all turn signals. Accessories: Classicbike-Raisch recommends a plug & play cable set for easier installation. This can simply be connected to the original wiring harness and must then only be wired to the taillight and turn signals (so nothing has to be cut or soldered to the original wiring harness).For all those who want to be 100% legal on the road, there is still a reflector in the accessories.To mount the license plate, we recommend the license plate screw set. All parts can be ordered below in the description.

The mo.blaze tens2 from motogadget is the smallest taillight/brake light combination in the world. Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to IntensiLED® Technology and definitely not to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The taillight / brake light combination has an ECE approval as a rear taillight and brake light. The aluminum housing is CNC machined and available in black anodized or mirror polished finish. The taillight / brake light combination can be operated like any standard LED light with 12 V. The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed. Specifications: Total length with thread 29 mm Leangth without thread 11 mm Largest diameter 11 mm Wire leangth ca. 110 cm Weigth with wire  ca. 20 g Mounting M8 Gewindebolzen Power consumption ca. 1/1 Watt

The Rizoma DBL system is a safety device that activates a flashing brake light to warn vehicles behind an intense and sudden braking. The device is activated when properly mounted on the motorcycle when the vehicle makes a sudden deceleration / emergency stop by flashing the brake light at a frequency of 4 Hz (flickering light as known from cars during an emergency stop). The system only works at speeds of 40 km/h and above. The DBL-Box can easily be connected to the rear light of the motorcycle or to a combination indicator.The sensor is an acceleration sensor and therefore does not need a connection to the brake hydraulics.

This Triumph aluminium end plate allows the rear light of the Speed Twin to be dismantled and the Triumph rear light / turn signal combination to be installed (see photo).These turn signals then combine turn signal, rear light and brake light in one. The conversion ensures a cleaner rear end.You can find the indicators / rear light combination in the accessories of this description.

This Triumph LED rear light allows you to mount the Scrambler 1200 indicators on the rear light instead of the original license plate holder. In addition the original taillight is replaced by a nice small LED taillight. You can either continue to use the original turn signals (which we do not recommend, because they look too big compared to the LED tail light) or the Triumph LED turn signals (see accessories in this description).

Kellermann Atto Taillight, the smallest LED taillight available on the market! And that with E-number! Perfect for anyone who wants to have the taillight just as inconspicuous as possible on the bike to get as clean a tail as possible (see pictures) Especially in connection with the Atto turn signals you get in the rear area an incredibly clean look. (The indicators can be found under Accessories in this description). The Quadrature of the circle has been achieved with the Atto RB: This rear and brake light is extremely small and also spectacularly bright. Compact and bright: This combination makes the Atto® RB a real sensation! For comparison: the light surface of the Atto® fits four times on a 1 cent coin! This consistent reduction opens up completely new design options on the motorcycle. Due to the Atto® RB, the component "rear and brake light" on the motorcycle can virtually disappear visually. When it shines, it shines with intensity that made Kellermann's products legendary and our company a trendsetter over and over again. The Atto RB offers maximum brightness with minimal size, in short: it is "sensationally small - spectacularly bright". We recommend not to look directly into the light of this small power plant for too long! An optimized light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology is the first application of our new EXtranz - Extreme Optical Transparency Technology makes this combination possible.

Rizoma LED Taillight in Cafe Racer Style. Rizoma means: high quality, this also applies to this taillight. A chic, small LED aluminum rear light in deep black anodized, which is manufactured in the highest quality. Fits perfectly with all conversions, with a short fender in which a central tail light is to be installed (see attachment photo on the R9T).

Finally a small taillight, in the classic design, that despite the small size is bright. Everyone who now thinks LED with a classic motorcycle, it does not fit. Is wrong, because the rear light fits like ass on bucket to our bikes and also the LED light looks good. The housing is completely metal. In the non-visible area, there is a small slot on the underside, in which the license plate lights. Tail light is with E number. Rücklicht ist mit E-Nummer

LED rear light MILES with license plate light. Black anodized metal housing with oval holes and holder, red glass, E-tested. Here to the ready wired cable set

Taillight Sparto. Classic round optics in chrome-plated or black metal with E-number and license plate holder. Looks beautiful and really classic.A license plate light is also integrated.Blinker holders are not included in the rear light. Matching turn signal holders can be found in the accessories of this description.In the accessories you will also find ready-made cable sets, plugs, etc. to make installation easier.

Bates Style taillight LED black. Super class metal metal. With e-number. Here to the ready wired cable set

Old School taillight. LED black metal housing, red glass - with number plate illumination and E number

Lucas style metal tail light.The metal housing is available in silver or black.Much nicer than the original giant plastic tail light.For easy connection we recommend to order a cable set. See accessories article in this description. We also offer a practical indicator holder that is ideal for attaching to the tail light (see accessories article).Or you can order the tail light as a complete kit (see accessories article in this description).Attention, this tail light cannot be mounted plug & play on the holes of the original mudguard. 3 new holes have to be drilled. The original holes are then covered by the rear light and the number plate (if it is attached to the rear light).