Legend Gear side pocket LC1 13,5l / The bags are delivered without holder. These must be ordered separately (see accessories in this description)The side pocket 1 combines classic look and contemporary handling. The bag can be attached to and removed from the SLC side pocket carrier in a few easy steps using a quick-release system. Robust Napalon imitation leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Model-specific SLC side pocket carrier made of sturdy tubular steel ensures reliable hold Quick-release fastener made of glass-fibre reinforced polyamide allows the side pocket to be attached and removed in seconds Single or double-sided mounting Side pockets available as left or right, small or large version (LC1/LC2) LC1 side pocket also suitable for bikes with top-mounted exhaust thanks to its compact shape Rain protection by roll closure, water-repellent material and waterproof inner pocket Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated size: 14 x 26 x 31 cm Capacity: 9,8 lScope of delivery: 1 Legend Gear Saddlebag LC1 (left) 1 waterproof inner pocketOptional accessories: SLC side pocket carrier (see accessories)Important notice: To protect the natural fibre from weather influences, we recommend impregnating the cotton textile surface of the product at regular intervals or after intensive cleaning with a commercially available wax impregnation (e.g. from Fjällräven). (You can find the right wax in the accessories) You can order the bag with or without holder (if you want to have the bag in 2 sizes you only need the holder once). Translated with www.DeepL.com/Translator
Legend Gear side pocket 13,5l / The bags are delivered without holder. These must be ordered separately (see accessories in this description)The LC2 side pocket combines classic look and contemporary handling. The bag can be attached to and removed from the SLC side pocket carrier in a few easy steps using a quick-release system. Robust Napalon imitation leather and waxed canvas fabric underline the elaborate vintage design of the soft luggage series. Model-specific SLC side pocket carrier made of sturdy steel tube ensures reliable hold (this must be ordered separately, see accessories) Quick-release fastener made of glass-fibre reinforced polyamide allows the side pocket to be attached and removed in seconds Single or double-sided mounting Side pockets available as left or right, small or large version Rain protection by roll closure, water-repellent material and waterproof inner pocket Straps for attaching the shoulder strap LA4 (see Accessories) Low weight with an attractive design Material: Robust Napalon synthetic leather and waxed canvas fabric with water-repellent PU coating. Waterproof inner bag made of 210D polyamide, double PU-coated size: 14 x 35 x 31 cm (W/H/D) Capacity: 13,5 lScope of delivery: 1 Legend Gear side pocket LC2 (left) 1 waterproof inner pocketOptional accessories: Shoulder strap LA4 (see accessories)Important notice: To protect the natural fibre from weather influences, we recommend impregnating the cotton textile surface of the product at regular intervals or after intensive cleaning with a commercially available wax impregnation (e.g. from Fjällräven). (you can find suitable wax under accessories at this article) Bag only fits T120 & T100, StreetScrambler, Speedmater because the exhaust of the Street Twin and Thruxton is too high.
A very high quality, handmade genuine leather backpack, which can be used on many motorcycles as a very practical and quickly removable side bag.The backpacks are made of very durable leather, which gets its patina over time and becomes more and more beautiful. A bag to inherit!
The scope of delivery includes fabric straps of different lengths with which the backpack can be attached to many motorcycles within seconds.See assembly video at the end of the description. See below for model specific information.
The practical, rollable closure allows you to vary the size of the bag.Dimensions with rolled up closure: 46 x 25 x 13 cm / 14-15LInside the backpack is a laptop compartment, as well as a small pocket to store small items such as keys.The Vintag leather backpack is also available as a mini version to wear around the neck. You can also attach it to the outside of the backpack with an accessory strap (see accessory items in this description).
Mounting on air-cooled Triumph models: The backpack can be easily mounted to the rear frame with the fabric loops. We recommend to order our panniers with spacers to prevent the bag from dragging on the tyre. (see accessories in the description)
Mounting on water-cooled Triumph models:
Bonneville & Street Twin models: The backpack can be easily mounted to the rear frame with the fabric loops. However, as a precaution we recommend ordering our pannier spacers to prevent the bag from dragging on the tyre. (see accessories in the description)
Scrambler 1200:The backpack can be easily mounted to the rear frame on the left side with the fabric loops.
Thruxton & Speed Twin:The backpack can be easily mounted to the rear frame with the fabric loops. However, as a precaution we recommend ordering our pannier spacers to prevent the bag from dragging on the tyre. (see accessories in the description)
Bobber & Spedmaster:Mounting on the bike with the loops is not easy.
Mounting on BMW R nine T models:Mounting on the motorcycle with the loops not possible without further ado.
A very high quality, handmade backpacks made of genuine leather and canvas fabric, which is also very practical to use on many motorcycles as a very quickly removable side bag.The leather straps can be easily stowed at the back of the backpack when hanging it on the motorcycle.For the production of the backpacks are used materials of very high quality, which ensure a very long life despite heavy use on the motorcycle. Genuine leather is used on the one hand and 14 ounce heavy canvas / canvas on the other. The canvas fabric is coated with wax on both sides. The coating is used for water repellent protection. For really heavy rain, a waterproof rain cover is included in the package.
The Rambler backpacks have a padding incorporated in the back area, which provides on the one hand for a higher wearing comfort and makes the backpack stiffer on the other hand, which provides for an easier / better mounting option on the motorcycle.
Included are different lengths of fabric tabs, with which the backpack can be attached to many motorcycles within seconds.See mounting video at the end of the description. Model specific info see below.
Dimensions: 45 x 31 x 15 cm /. Capacity: 24 lInside the backpack are 4 convenient, quick access compartments.
Fits air-cooled Triumph models: The backpack can be easily mounted on the rear frame with the fabric loops. However, as a precaution, we recommend ordering our pannier spacers to prevent the bag from rubbing against the tire. (see accessories in the description)
Fitting to water cooled Triumph models:
Bonneville & Street Twin models: The backpack can be easily mounted to the rear frame using the fabric loops. However, we recommend as a precaution to order our pannier spacers to prevent the bag from dragging on the tire. (see accessory article in the description)
Scrambler 1200:The backpack can be easily mounted to the rear frame on the left side using the fabric loops.
Thruxton & Speed Twin:The backpack can be easily mounted to the rear frame with the fabric loops. However, as a precaution, we recommend ordering our pannier spacers to prevent the bag from rubbing against the tire. (see accessory article in the description)
Bobber & Speedmaster:Mounting on the motorcycle with the loops not easily possible.
Mounting on BMW R nine T models:Mounting on motorcycle with the loops not readily available.
Genuine craftsmanship from Italy! The MUD leather bag system is the perfect combination of functionality, old school leather bag look & absolute high end quality / workmanship. The bags are handmade in Italy from very thick leather. A nice soft leather is used to get the casual hanging backpack look and to allow the height variable roll up closure.
Fastening system:The best thing about these bags is that they not only look good, but they also have a very good & practical fastening system.The bags have the SYS quick fastening system on the back. Thanks to this system, the bags can be attached to and removed from the motorcycle with a flick of the wrist and a click.In addition to the bags, a motorcycle model-specific SW-Motech Legend Gear SLC luggage holder is required (you can find this under accessories in this product description). Tip: If you already have a Legend Gear luggage system fitted to your motorcycle, you can simply replace your SW Motech bag with the MUD Bag.
Waterproof: The leather of the bags is properly oiled at the factory, making the bags water-repellent. In other words, if you get caught in a rain shower, the bags will easily remain waterproof. If you get caught in a really heavy downpour on a motorcycle tour, a waterproof rain cover is also included.
Additional belt pouch:There is another small pocket on the front of the bag, this can also be removed if necessary and used as a belt pouch (very practical for storing expensive valuables, for example, that you don't want to leave on your motorcycle when visiting your favorite pub).
Magnetic fasteners:Retro look paired with state-of-the-art magnetic fasteners! The Mud Bag uses classic leather straps with belt buckles as fasteners. However, because such fasteners are not exactly practical, a modern magnetic fastening system is hidden under the belt buckles. The system can be opened and closed in a single movement.The belt buckle therefore only serves as a fixed length adjustment for the leather strap.
Roll up closure / variable size: To close the mud bag, it is rolled up at the top like a classic messenger bag. This looks cool and allows you to make the bag bigger and smaller if necessary. Thanks to the roll-up closure, the bag has a height of 35 to 45 cm.
Extra strap: The bags are available with or without extra leather straps on the sides of the bag. With the bag with the extra straps you can attach things to the left and right of the bag, such as a water bottle, a camera tripod or other things.
Inner lining:A bright orange fabric was carefully chosen as the inner lining to make it easy to find your things in the bag. The contrasting and bright color really makes it much easier to find individual items. The inner lining is also washable.
Size / Volume: Height: 35 - 45 cm Width: 33cmDepth: 17cmVolume: 20 - 25 liters
A really nice, classic tank bag made from canvas/sailcloth.
Quality / Fastening / 2-1 tank bag & backpack
This VERY high-quality tank bag focuses on the essentials for a tank bag paired with a very nice design. The tank bag is attached to the motorcycle in the classic way with 2 straps, guaranteeing a very secure and firm hold. The straps are fitted with a cover that makes it possible to conceal the metal straps.When removed from the motorcycle, the tank bag can also be used as a normal rucksack, which is particularly practical on tours or short trips. This gives you the option of not leaving your valuable belongings on the motorcycle when you are away from it.
Water-repellent / care
The backpack is made of thick / very high-quality canvas fabric. The fabric is lightly waxed and therefore slightly water-repellent (not waterproof). This can be reinforced with a waterproofing spray. Suitable waterproofing spray and wax (to care for the bag so that you can enjoy it for a long time) can be found under accessories in this product description.
Storage space
The tank bag has two pockets that are accessible from the outside and can be opened with a high-quality metal zipper. There is also a small additional pocket on the side where you can stow things that you need to have to hand quickly (e.g. sunglasses / cash etc.).Inside the main compartment there is a separate compartment that offers space for documents or a laptop (up to 15"), for example.
Dimensions
Dimensions: Length 42cm, width 31cm, height 14cmVolume: 23 litersWeight: 2.15kg
A really beautiful, classic tank bag made from genuine suede
Quality / Fastening / 2-1 tank bag & backpack
This VERY high-quality tank bag focuses on the essentials for a tank bag paired with a very beautiful design. The tank bag is attached to the motorcycle in the classic way with 2 straps, guaranteeing a very secure and firm hold. The straps are fitted with a cover that makes it possible to conceal the metal straps.When removed from the motorcycle, the tank bag can also be used as a normal rucksack, which is particularly practical on tours or short trips. This gives you the option of not leaving your valuable belongings on the motorcycle when you are away from it.
Water-repellent / care
The backpack is made of thick / very high-quality canvas fabric. The fabric is lightly waxed and therefore slightly water-repellent (not waterproof). This can be reinforced with a waterproofing spray. Suitable waterproofing spray and wax (to care for the bag so that you can enjoy it for a long time) can be found under accessories in this product description.
Material
The Unit Garage tank bag (handmade in Italy) is made from 3mm thick, extremely high-quality genuine leather. The high-quality material guarantees that the backpack will last a lifetime if cared for properly.
Storage space
The tank bag has two pockets that are accessible from the outside and can be opened with a high-quality metal zipper. There is also a small additional pocket on the side where you can stow things that you need to have to hand quickly (e.g. sunglasses / cash etc.).Inside the main compartment there is a separate compartment that offers space for documents or a laptop (up to 15"), for example.
Dimensions
Dimensions: Length 42cm, width 31cm, height 14cmVolume: 23 litersWeight: 2.15kg
The Navigator tank bag is a practical small backpack for short trips.The tank bag combines a practical cell phone compartment (with transparent film to use the cell phone for navigation) with a small, practical pocket in which you can store the essentials for a day trip (wallet/keys etc.). The navigator is held to the tank with 6 strong magnets, so there is no need to attach it (just the thing for a bag that you spontaneously take with you for a short trip).
The bag is made of heavy canvas combined with leather: Waterproof zippers and heavily waxed materials ensure that the bag can withstand a downpour without getting wet on the inside (it probably can't withstand constant rain).
Dimensions of the bag: 22 x 12.5 x 7.5 cm (large enough for an iPhone Max).
In addition to being used as a tank bag, the bag can also be used as a belt bag or shoulder bag (with the supplied strap).This is very practical if you want to take your valuables with you when you are away from the bike for a while on tour.
A very stylish suede motorbike side bags handmade in Italy by Unit Garage.Available in two sizes: 10-14 litres / 22-30 litres.
In the set together with a side pocket holder (can be ordered directly below the description) there is a 12,5% discount on the entire set!
The suede bags have a waxed surface (we recommend waxing & waterproofing the bags once a year, you can order the appropriate wax & spray below the description), which ensures that the bags are water-repellent. If you want to be on the safe side for tours and don't want to get your clothes wet in heavy rain, we recommend ordering a Unit Garage rain cover or Khali inner bag (can be ordered below). We use the highest quality leather available in Italy, 3mm thick.
The Unit Garage bags do not only look cool, they are also extremely practical and good motorbike side bags. The bags have a quick release fastener on the back, which allows the bags to be attached to the Unit Garage side bag holder in one easy step (You can order the matching bag holder for your motorbike directly below the description in the set.). In addition, a lock is integrated into the quick-release fastener, which protects the bag against theft.
The bags have a practical outside pocket for things that you need to access very quickly, and a shoulder strap for carrying the bag is also included.
Details of the 10-14 litre bag: Dimensions: height 32 cm, extendable to 45 cm, width 24 cm depth 13 cm.Volume: 10-14 litresWeight: 2,2 kg This bag can hold a 15-16 inch laptop.
Details of the 22-30 litre bag: Dimensions: height 35 cm, extendable in height up to 50 cm, width 32 cm, depth 20 cm.Volume: 22-30 litresWeight: 2,75 kgThe large version of the bag has a removable inner core, which ensures that the bag keeps its shape even when there are no contents in the bag.You can fit a jet helmet in the bag.
A very stylish canvas / cotton linen motorbike side bag handmade in Italy by Unit Garage.Available in two sizes: 10-14 litres / 22-30 litres.
In the set together with a side pocket holder (can be ordered directly below the description) there is a 12,5% discount on the entire set!
The canvas bags have a waxed surface (we recommend re-waxing & waterproofing the bags once a year, you can order the appropriate wax & spray below the description), which ensures that the bags are water-repellent. If you want to be on the safe side for tours and don't want to get your clothes wet in heavy rain, we recommend ordering a Unit Garage rain cover or Khali inner bag (can be ordered below).
The Unit Garage bags do not only look cool, they are also extremely practical and good motorbike side bags. The bags have a quick release fastener on the back, which makes it possible to attach the bags to the Unit Garage side bag holder with just one movement (You can order the matching bag holder for your motorbike directly below the description in the set.). In addition, a lock is integrated into the quick-release fastener, which protects the bag against theft.
The bags have a practical outside pocket for things that you need to access very quickly, and a shoulder strap for carrying the bag is also included.
Details of the 10-14 litre bag: Dimensions: height 32 cm, extendable to 45 cm, width 24 cm depth 13 cm.Volume: 10-14 litresWeight: 1,45 kg This bag is big enough to hold a 15-16 inch laptop.
Details of the 22-30 litre bag: Dimensions: height 35 cm, extendable in height up to 50 cm, width 32 cm, depth 20 cm.Volume: 22-30 litresWeight: 1,90 kgThe large version of the bag has a removable inner core, which ensures that the bag keeps its shape even when there are no contents in the bag.You can get a jet helmet inside the bag.
Modern unit garage TPU plastic side bag that is 100% waterproof.20-26 litre capacity.Equipped with the Unit Garage quick release fastener on the back of the bag, it is attached to the Unit Garage side bag holders.
In a set together with a side bag holder (can be ordered directly below the description) there is a 15% discount on the whole set!
The Unit Garage bags not only look cool, they are also extremely practical and good motorbike side bags. The bags have a quick-release fastener on the back, which makes it possible to attach the bags to the Unit Garage side bag holder with just one movement (you can order the matching bag holder for your motorbike below the description in the set).In addition, a lock is integrated into the quick-release fastener, which protects the bag against theft.
The bags have a practical outside pocket (accessible via a waterproof zip) for things that you need to access very quickly, and a shoulder strap for carrying the bag is also included.
Materials: High frequency heat sealed TPU with Hypalon surfaces.- TPU is the latest generation material that makes PVC obsolete. It is a composite material with excellent elasticity & wear resistance.- TPU is a highly technological, durable material with excellent waterproofing properties that is resistant to weathering, chemicals and UV rays.
- Roll-up closure that guarantees waterproofness.- Magnetic buckles (quick release)- Reflective inserts for better visibility- Straps with Velcro fastening to secure the excess part- Rigid reinforced back to keep the bag in shape- Shoulder strap and handle included
Dimensions: Height 38 cm, extendable in height up to 48 cm, width 30 cm, depth 18 cm.Volume: 22-26 litresWeight: 1,25kg
Motone luggage rack for the Triumph Bobber mudguard.
Made of stainless steel, optionally polished or black powder coated.
The practical luggage rack is screwed onto the mudguard of your Bobber. Mounting material and rubbers are included.
The carrier has various fastening options that make it easy to attach luggage.
Genuine 10 litre steel petrol canisters that are elaborately handcrafted to the motorcycle side pocket are reworked. There is no more stylish solution to get a luggage case on your motorcycle!
An absolute eye catcher on every machine and also practical! As a basis for these cases serves a real gasoline canister of 0.9mm thick steel (weight approx. 3kg so really high quality). The canisters are painted black glossy, cut open, with high-quality aluminum hinges, leather applications, edge tape and fasteners provided (all by hand). Optionally there is the suitcase then still from the inside with hard-wearing material (feels like suede) lined (our absolute recommendation this looks simply really high-quality, if you open the suitcase and it does not scratch anything from the inside).
The 10 litre canister measures 346 x 275 x 168 mm (HxWxD).
The canisters are also available in 5 & 20 litre versions (see similar items in this description).
We recommend to mount the cases together with the SW-Motech Legend Gear luggage holders from our range (these have to be ordered model specific). See accessories in this description).The canisters are supplied without suitable holes for the holders. If the SW-Motech holders are ordered with it, we will supply suitable screws for mounting on the holder.To get the same hole pattern in the canisters as the Legend Gear luggage holders, we recommend ordering our template (see accessories in this description).
Genuine 20 liter steel petrol cans that have been painstakingly converted by hand into motorcycle side bags. There is no more stylish solution for attaching a luggage case to your motorcycle!
An absolute eye-catcher on any bike and practical too! The basis for these cases is a genuine 0.9 mm thick steel petrol can (weight approx. 4.3 kg, i.e. really high quality). The canisters are painted glossy black, cut open, fitted with high-quality aluminum hinges, leather applications, edge band and tension fasteners (all done by hand). Optionally, the cases can also be lined on the inside with hard-wearing fabric (feels like suede) (our absolute recommendation - it simply looks really high-quality when you open the case and nothing scratches the inside).
The 20 liter canister measures: 467 x 166 x 346 mm (HxWxD)
The canisters are also available in 5 & 10 liter versions (see similar articles in this description).
We recommend mounting the cases together with the SW-Motech Legend Gear luggage holders from our range (these must be ordered specifically for each model. See accessories in this description).The canisters are supplied without suitable holes for the holders. If the SW-Motech holders are ordered in addition, we also supply suitable screws for mounting on the holder.To get the same hole pattern in the canisters as the Legend Gear luggage holders have, we recommend ordering our template (see accessory article in this description).
Take all your essentials with you for a short ride on your bike, without full pockets or a backpack on your back. This handcrafted genuine leather bag is easily attached to your thigh and belt with its adjustable strap. Does not disturb while driving absolutely, and is also hardly noticeable when carrying. The bag, which is made of very high-quality and thick leather, offers space for wallet, gloves, keys, a small camera and other small things. In addition, the bag has an easily accessible pocket on the back, with zipper for a mobile phone.Dimensions: 24 X 19 X 9 cm
We also have many other leather items, made of the same leather, in our shop. For example real leather handles (see similar items in this description).
Beautiful magnetic real leather tankbag (Handmade!)Probably the most beautiful and practical tankbag you can buy.The genuine leather bag is attached to the tank with 6 strong magnets. Simply practical! Put it on and it is already fixed. Once properly pull on it and it is again off and can be taken along. On the back there is a loop to attach the bag to the belt.On the one hand very practical on every small trip to take his wallet, mobile phone, keys etc. with him, on the other hand just a chic bag that makes the bike more beautiful!
Additionally you can combine this tankbag with our new, slightly larger tankbag by simply placing it on top, which gives you even more storage space for additional luggage, see below under further accessories.We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar items in this description).Dimensions: 18 cm X 14 cm X 5 cm
Attention: This does not work if an aluminium tank is installed. The BMW R9T Classic is equipped with an aluminium tank as standard.
Beautiful magnetic genuine leather tank bag (handmade!) made of thick buffalo full leather, the big brother of the old tank bag.The tank bag can be used as a tank bag, as a rear bag (extra straps included) or as a shoulder bag.In addition, the smaller tank bag can be strapped on top as a supplement, just like the cell phone bag. Both products can be found under the accessories in this description.The real leather bag is attached to the tank with six strong magnets. Just practical! Put it on top and it is really firm, even at higher speeds. Just pull it once properly and it is off again and can be taken along. There is a loop on the back to attach the bag to your belt.With a capacity of 4.4 liters you can take a little more than your wallet, cell phone, keys, etc. On the one hand super practical, on the other hand an optical highlight, which you don't see on every corner and makes your bike unique.
Also included is a rain cover that you can pull over the bag if necessary.We also have many other leather items made of the same leather in our store. Like for example real leather handles (see similar items in this description).Dimensions: 22 cm X 19 cm X 10,5 cm Attention: Does not work if an aluminum tank is installed. The BMW R9T Classic has an aluminium tank as standard.
Finally there is a really chic and high quality cell phone case as magnetic version for the tank.The case is made of high quality buffalo leather, the workmanship is really great.Of course the case is also touchscreen friendly, so you can use the cell phone quickly.The cover can also be mounted in combination with our tankbag (will be attached to the top of the tankbag). Tank bag see accessories below in the description.We also have many other leather items made of the same leather in our store. Like for example real leather handles (see similar items in this description).Dimensions: 21 cm X 12 cm
Attention: Does not work if an aluminum tank is installed. The BMW R9T Classic has an aluminium tank as standard.
A very high quality, handmade genuine leather rear luggage bag, with convenient access from the top.
Not quite as classic as the Military luggage roll but a little more practical if you want to "live out of the suitcase" from his tour. Because the Outlaw luggage roll is packed from the top and not from the side. In addition, the bag has 4 individual, easily accessible pockets to be able to sort his luggage neatly. The bag is variable in size due to its rollup closure, which is closed with a metal zipper.The bag is available in two sizes. In the small version it holds a maximum of 50 liters in the large even 70 liters.
The Outlaw bag can of course also be used as a univesale shoulder bag and not only as a motorcycle tail bag.
The bag has a handle to carry it reasonably when it is not on the bike. In addition, outside are some tabs & eyelets, with which you can quickly and easily lash the bag to the motorcycle.
Included are some straps and ropes to attach it to the bike and a shoulder strap to carry the bag comfortably. In addition, a plastic rain cover is included to protect his belongings when it gets really wet. A light rain shower keeps the bag but even so, if you maintain the leather from time to time and impregnated.
Consciously, a very high quality leather is chosen for these bags, so that you have many years or even no whole life joy of the bag. As with all leather things, just this vintage military duffel bag with the years & from tour to tour more beautiful by the patina he gets.
Dimensionssmall: 26 X 51 X 35 cm / 50 literslarge: 26 X 51 X 51 cm / 70 liters
Among the accessories in this description you will find other leather items that are made of the same leather as the luggage roll.
The Heavy Duty tank bag is made of thick, waxed canvas fabric. However, you can use it not only as a tank bag, but also as a rear bag (practical if you don't want a bag on the tank).
The tank bag is attached using the four integrated magnets on the underside. The bag also has four double-D fasteners, which can be used to attach it even more securely to the tank or to attach it to the back of the seat.The very practical map bag is also included in the scope of delivery. This also has integrated magnets to attach it either to the top of the bag or directly to the tank of the motorcycle. This is very practical if you are only on a short day trip. A stretch screen is built into the map pocket, which stretches to accommodate any cell phone or tablet.The bag has two practical outer pockets and a large main pocket with elastic side panels.A practical carrying handle is also integrated into the tank bag, making it easy to take off the motorcycle.
Dimensions: Length: 30 cm Width: 26 - 29 cm Height: 19 - 22 cm
A very high quality, handmade real leather bag. Which can be easily attached to the frame of many motorcycles with the 2 leather straps (e.g. on all Triumph models on the rear frame). A shoulder strap is also included. So you can hang the bag elegantly around your shoulder.The cool thing about the bag is that it is so small that it does not disturb the motorcycle at all. It looks more like a chic accessory on the bike and is also very practical to take a few small things with you.The bags are made of very durable leather, which gets its patina over time and becomes more and more beautiful. A bag to inherit!The little vintage bag is something like "the little sister" of our vintage leather jerk. It looks just like this but in a small size (about 1/3 smaller).We offer an optional extra strap that allows you to attach the small bag to the big backpack (see accessories in this description). So you can easily take both bags with you. See last picture (the big backpack on the pictures is not included!)Due to the practical, rollable closure, the size of the bag can be easily varied.Dimensions with rolled up closure: 25 x 18 x 8 cmBobber & Speedmaster:Mounting on the rear frame (as none is available) not possible without further ado.Mounting on BMW R nine T models:Mounting on the rear frame is not possible without further ado.
A very high quality, handmade genuine leather luggage roll in the style of an old military duffel.The classic one is perfect for every motorcycle tour, the luggage roll. But most of them look anything but beautiful. The classic plastic wheels are practical but do not fit to our horny bikes!Here is the solution! A practical luggage roll made of real leather. Super fast to pack, a lot of space (variable size by rolling up the opening) and quickly attached to the bike. And in addition the duffel bag looks really chic!The roll has a small inside pocket to store important things and small parts, as well as a small zipper on the outside, with which you can reach the inside of the bag. Very practical for things you need to get hold of quickly on tour (so you don't have to open the whole bag.The bag has a handle to carry it properly when it is not on the bike. There are also some straps & eyelets on the outside, with which the bag can be quickly and easily lashed to the bike.Included are some straps and ropes to fix the bag to the bike and a shoulder strap to carry the bag comfortably. Also included is a plastic rain cover to protect your belongings when it gets really wet. The bag can also withstand a light rain shower, if you take care of and impregnate the leather from time to time.A very high quality leather is deliberately chosen for these bags, so that you can enjoy the bag for many years or not at all. As with all leather items, this vintage military duffle bag gets more and more beautiful with the years & from tour to tour due to the patina it gets.dimensions: height: 50cm / diameter: 25cm / volume: 24LAmong the accessories in this description you will find other leather items that are made of the same leather as the luggage roll.Furthermore you can find some luggage rack systems in the accessories, with which you can tie the bag even easier to the bike.
Hepco & Becker steel tube luggage rack for the Triumph Bobber and Bobber Black.Since there is no possibility to store some luggage on the bobber in its original condition, this carrier is really more than practical when you go on a longer tour.Perfect for lashing a luggage roll, for example.Optically it fits very well to the bobber due to its massive optics and shape and can also be mounted outside of tours.For those who want to go on a really big tour and have to carry even more luggage, we recommend the luggage bridge for the fender (see accessories in this description).
Approximate dimensions of the carrier: 22cm width / 19cm length
Leather bags as replacement for the original side lid (this is simply removed and replaced by the leather bag).Genuine Italian handmade by Wild Hog from heavy, robust leather. 25 x 23 x 10 cm. This is still real leather quality as you know it from the past! Suitable for left & right. Model Specific information at the end of the description!
Smells like leather, feels like leather, and is heavy like leather! Dimensions of the bag 25 x 23 x 10 cm
A bag can't be much higher quality, it's a bag for life! The nice thing about such bags is that they become more and more beautiful over the years and a bit of dark leather grease.
Model specific specifications:
Bonneville, Thruxton, Speed Twin, Street models: fits on the left side only if our open air filter cover is installed (see category Raisch Tuning Kits). On the right side the bag fits in its original condition.Scrambler: On the right side not mountable because of the exhaust.
Bobber / Speedmaster: There are no restrictions on the models. Fits left and right.
Leather outdoor bag. Genuine "HEAVY DUTY" quality for Bonneville T100 & T120. It is 4mm thick bull leather. Water resistant, made by hand. The metal buckles and rivets are made of solid brass and then nickel plated. This small manufactory called "WILD HOG" comes from Italy. We discovered you on the Tridays and our enthusiasm was really great for these bags. Did not know that there is still something robust in this day and age. A bag for the whole life and also for inheritance. Yes, that's a real expensive affair, but once you've got this leather in your hand, it'll be worth the price. The contents of a bag is a good 18 liters. Dimensions: 37x34x16 cm. That's more than you think. There are already a few pants, socks, chain spray + tools in! If the bag is removed through the Fastbracket (is in and out in no time), only a barely disturbing small holder remains on the motorcycle, which does not disturb the appearance. The bag with the Fastbracket is equipped with a lock + key, so that a quick theft is prevented . The bags are available in black & dark brown. To the inside, an aluminum plate is sewn into the bag so that everything stays stable. Is absolutely high speed suitable. Of course I have already tested.
The bags are fastened with a removable & lockable holder (only takes a few seconds). This holder is included.
The Heavy Duty Toolbag is a very high quality and handmade tool bag, made in Italy from very thick leather (a bag that is definitely made for one or even several lives).
Genuine Italian craftsmanship by Wild Hog made of heavy duty 4 mm thick leather.
On the one hand, the tool bag is very practical for carrying small items (e.g. a can of beer) or really your tools and on the other hand, it is a small visual highlight on every machine.Like a woman's handbag.
Fits perfectly around the rear frame tubes under the seat, on the swingarm of the Triumph Bobber or in many other places with the included straps.The thick leather guarantees lifelong enjoyment of the bags!
Dimensions of the bag: 27x10 cm.
Heavy genuine leather bag handmade in Italy. Fits perfectly on the Triumph single seat with luggage rack or a luggage carrier. On the one hand very practical and on the other hand a bag that simply enhances the bike. Like the beautiful handbag of a woman. You can also attach the bag in many other places on the frame or otherwise with the straps on the back.
A bag can't be much higher quality, it's a bag for life! The nice thing about such bags is that they become more and more beautiful over the years and a bit of dark leather grease.
Inner dimensions of the bag (height, width, depth) 22 x 18 x 9 cm
Aluminium side lid with integrated real leather bag in brown, suitable for Bonneville T100 & T120 as well as StreetTwin, Cup & Scrambler.On the one hand, the side covers are much nicer than the original ones, because they are simply much smaller, and on the other hand, the leather bag looks great and is also practical.Can simply be exchanged one to one with the original ones (are changed in a few seconds).The lids are sold separately.
This small Motone luggage rack made of 300 stainless steel is the perfect rack for carrying small items. If you need a carrier for big tours, we recommend the BIG version (see similar articles).
The Motone rack is quite solid and of high quality (much better than many other racks you can buy). It is also very well thought out. It also has a second strut that serves as a grab rail for the passenger. In addition, a lug is welded to the left and right underneath the carrier to make it easier to lash down the luggage.
ATTENTION: Does not fit with the Bonneville T100 & T120 original seat. With all accessory seats (except the Triumph comfort seat) the carrier fits.
This large Motone luggage rack made of 300 stainless steel is the perfect rack when you are travelling and have to carry a lot of things. If you usually only have to take small things with you and would rather have a more inconspicuous carrier, we recommend the SMALL version (see similar articles).
The Motone rack is quite solid and of high quality (much better than many other racks you can buy). It is also very well thought out. It also has a second strut that serves as a grab rail for the passenger. In addition, a lug is welded to the left and right underneath the carrier for better lashing of the luggage.
The Big version of the carrier, in addition to the attachments under the seat, is also attached to the inside of the shock absorbers so that the carrier can carry more weight.
ATTENTION: Does not fit with the Bonneville T100 & T120 original seat. With all accessory seats (except the Triumph comfort seat) the carrier fits.
A really more than a pratical and also a nice backpack. The numerous mounting points on the rucksack allow the rider to be fastened both longitudinally and transversely to almost every seat. The perfect companion for any tour. Can be done with just a few hands again and then take with him as a backpack.
Specifications:
Universal fit for seat and rear
Thanks to its compact design, it is also suitable for bikes with overhead exhaust
Safe hold thanks to 4-point tensioning belt attachment
Can be turned into a full backpack with just a few hands
Padded, adjustable straps ensure an exact fit and high wearing comfort
If the backpack function is not required, the straps can be stowed easily on the backpack
A waterproof rain cover provides ideal protection, even with heavy rain
With shoulder strap LA4 a practical shoulder bag (see accessories)
Numerous holding loops for individual attachment of the additional pockets LA1 / LA2 and the smartphone bag LA3 (see accessories)
Material: Robust Napalon synthetic leather & waxed canvas fabric, PU inner coating. Rain cover made of 210D polyamide, double PU coated
Size: 30 x 17 x 40 cm (W / H / D)
Volume: 17.5 l
Delivery:
1 Legend Gear Bag LR1
4 Mounting straps
2 Markings
1 rain cover
Important NOTE:
For the protection of the natural fiber from weathering influences, we recommend to impregnate the cotton textile surface of the product at regular intervals or after intensive cleaning with a commercially available wax impregnation (eg from Fjaellraeven).
The optimal companion for large tours. Here you really get everything purely what you need (48 liters of storage space). In addition, the bag looks through the combination of leather and fabric also really nice. The attachment of the bag is also very easy due to a well thought-out mounting system and the bag sits really tight.
Note for Scrambler vehicles with overhead exhaust: On these vehicles, the bag can be very close to the exhaust and therefore cause problems. Either a bottom-mounted exhaust must be installed on these vehicles, or remedy with a heat shield.
Specifications:
Universal fit for a wide variety of motorcycle models, also suitable for overhead exhaust systems.Non-slip undersideSecure hold due to 4-point tension belt attachmentRain protection due to water-repellent material and waterproof inner pocketNumerous holding loops for individual attachment of the additional pockets LA1/LA2 and the smartphone pocket LA3 (see accessories)Material: Durable Napalon synthetic leather & waxed canvas fabric, PU inner coating. Waterproof 210D polyamide inner bag, double PU coating.Size: 68 x 45 x 30 cm (W/H/D)Volume: 48 lScope of delivery:
1 Legend Gear tail bag LR21 waterproof inner bag4 fastening straps2 license plate mountsImportant Notice:
To protect the natural fiber from the elements, we recommend impregnating the cotton textile surface of the product with a commercially available wax impregnation (e.g. from Fjällräven) at regular intervals or after intensive cleaning.
Pair of universal spacers for all types of panniers from the accessories so that they cannot get into the spokes.Easy mounting on upper shock absorber mount and passenger footrest attachment.On the Bobber they are screwed to the inside of the frame.On the one hand the holders prevent bags from getting into the wheels, on the other hand bags can be attached to it (e.g. with a belt, cable ties or similar).The price is for one pair.For the Bonneville and Street models the holder is also available separately for the left side only (see accessories in this description).
Legend Gear Satteltaschen passent zum Satteltaschenhalter. Gibt es in der Groesse 9,8 l. und 13,5 l.
Die grossen 13,5 l. Taschen passen nur an die Bonneville T100 & T120 + Scrambler. An der Scrambler kann man die Tasche aufgrund des Auspuffs natuerlich nur links montieren.
Die Legend Gear Satteltasche nimmt jede Tour mit Gelassenheit. Die Retro-Tasche laesst sich mit wenigen Handgriffen am Satteltaschen-Halter SLS festmachen und besticht durch ihr aussergewoehnliches Design.
Zur Befestigung an Legend Gear Satteltaschen-Halter SLS (siehe Zubehoer), der sich dank seiner universellen Passform fuer eine Vielzahl von Standard-Sitzbaenken mit zweitem Sitzplatz eignet, auch fuer Umbauten
Anbringen der Tasche auf beiden Seiten und in unterschiedlichen Hoehen moeglich, auch fuer den Einsatz an Fahrzeugen mit obenliegendem Auspuff
Halteschlaufen und Sicherungsriemen mit gebuersteten Aluminiumhaken ermoeglichen eine sichere und flexible Befestigung der Tasche am Satteltaschen-Halter SLS
Regenschutz durch Rollverschluss, wasserabweisendes Material und wasserdichte Innentasche
Praktische Schultertasche in Kombination mit Schultergurt LA4 (siehe Zubehoer)
Geringes Gewicht bei formschoenem Design
Material: Robustes Napalon-Kunstleder und gewachstes Canvas-Gewebe mit wasserabweisender PU-Beschichtung. Wasserdichte Innentasche aus 210D Polyamid, zweifach PU-beschichtet
Groesse: 14 x 26 x 31 cm (B/H/T) / 14 x 35 x 31 cm (B/H/T)
Volumen: 9,8 l / 13,5 l
Lieferumfang:
1 Legend Gear Satteltasche LS1
1 wasserdichte Innentasche
2 Befestigungshaken
2 Kennzeichenbefestigungen
2 Befestigungsgurte
Optionales Zubehoer:
Satteltaschen-Halter SLS
Schultergurt LA4
Wichtiger Hinweis:
Zum Schutz der Naturfaser vor Witterungseinfluessen empfehlen wir, die Baumwolltextiloberflaeche des Produkts in regelmaessigen Abstaenden bzw. nach intensiver Reinigung mit einer handelsueblichen Wachsimpraegnierung (z.B. von Fjaellraeven) zu impraegnieren.
The tank strap for all accessory bags.
The retro design, specially developed for the water-cooled Triumph Modern Classic models, gives the bike an individual touch. Straps offer flexible but secure attachment of all additional pockets (see accessories).
Vintage style tank strapsPrecise adjustment of the tank strap to the tank shape of the respective motorcycle model ensures best fit and perfect line managementNumerous straps allow individual attachment of additional pockets and the smartphone bag LA3 (see accessories)Material: Robust Napalon imitation leather, straps and straps made of polyamidewidth: 10,5 cmScope of delivery:
Legend Gear tank strap SLA
Legend Gear Tankrucksack LT2
Der optimale Tankrucksack für alle, die immer ein bisschen Kleinzeug dabei haben, es aber nicht in der Tasche haben möchte. Alle Legend Gear Zubehörtaschen sind zusätzlich auf dem Tankrucksack zu befestigen (siehe Zubehör)
Der kompakte Tankrucksack LT2 wird mit klassischer Riemenbefestigung ausgeliefert. Zwei Clip-Verschlüsse geben den Weg zum Tankdeckel in wenigen Handgriffen frei. Auf diese Weise ist ein Einschneiden der weichen Unterseite für die Montage nicht erforderlich.
Überlappender Deckel gibt Schutz vor Schmutz und Feuchtigkeit
Kabeldurchlass an Vorderseite
Robuster Tragegriff
Regenschutz durch wasserabweisendes Material und wasserdichte Regenhaube mit Sichtfenster
Zahlreiche Halteschlaufen zur individuellen Befestigung der Zusatztaschen LA1/LA2 und der Smartphone-Tasche LA3 (siehe Zubehör)
Material: Robustes Napalon-Kunstleder & gewachstes Canvas-Gewebe, PU-Innenbeschichtung. Regenhaube aus 210D Polyamid, zweifach PU-beschichtet mit Sichtfenster aus 0.2 mm PVC-Folie.
Größe: 15 x 18 x 30 cm (B/H/T)
Volumen: 5,5 l
Lieferumfang:
Legend Gear Tankrucksack LT2
Regenhaube
Zwei Befestigungsgurte
Wichtiger Hinweis:
Zum Schutz der Naturfaser vor Witterungseinflüssen empfehlen wir, die Baumwolltextiloberfläche des Produkts in regelmäßigen Abständen bzw. nach intensiver Reinigung mit einer handelsüblichen Wachsimprägnierung (z.B. von Fjällräven) zu imprägnieren.
Starke Magnete geben dem Tankrucksack LT1 festen Halt auch auf unebener Strecke. Eine durchdachte Basisplatten-Auslegung ermöglicht das Lösen vom Tank ohne große Kraftanstrengung.
Durch das gut durchdachte Haltesystem kann man alle Legend Gear Zubehörtaschen zusätzlich auf dem Tankrucksack befestigen (siehe Zubehör)
Für nahezu alle Stahl-Tanks geeignet
Beschichtete Unterseite
Reißverschluss-Volumenerweiterung
Kabeldurchlass an Vorderseite
Robuster Tragegriff
Regenschutz durch wasserabweisendes Material und wasserdichte Regenhaube mit Sichtfenster
Zahlreiche Halteschlaufen zur individuellen Befestigung der Zusatztaschen LA1/LA2 und der Smartphone-Tasche LA3 (siehe Zubehör)
Material: Robustes Napalon-Kunstleder & gewachstes Canvas-Gewebe, PU-Innenbeschichtung. Regenhaube aus 210D Polyamid, zweifach PU-beschichtet mit Sichtfenster aus 0.2 mm PVC-Folie.
Größe: 18 x 10 x 25 cm (B/H/T)
Volumen: 3,0 - 5,5 l
Lieferumfang:
Legend Gear Tankrucksack LT1
Regenhaube mit Sichtfenster
Vier Befestigungsgurte (Riemenmontage bei nicht-magnetischen Tanks möglich)
Wichtiger Hinweis:
Achten Sie darauf, Gegenstände und elektronische Gegenstände, die durch Magnetfelder beschädigt werden können, von den eingenähten Magneten im Boden des Tankrucksacks fernzuhalten. Transportieren sie solche Gegenstände im Netzfach des Deckels.
Zum Schutz der Naturfaser vor Witterungseinflüssen empfehlen wir, die Baumwolltextiloberfläche des Produkts in regelmäßigen Abständen bzw. nach intensiver Reinigung mit einer handelsüblichen Wachsimprägnierung (z.B. von Fjällräven) zu imprägnieren.
The Outlaw Saddlebag is a classic, soft genuine leather bag that is handmade.
The practical Outlaw messenger bag has a few interior pockets and a laptop pocket (max 15"). It is attached to the rear frame. The typical for a messenger bag roll closure not only looks cool, but also gives you the opportunity to vary the size and packing volume of the bag.
The bag can be mounted on the motorcycle in two ways:1. it comes with short straps that can be placed around the rear frame. On these are rakes with which the bag can then be made tight.2. two seat straps are supplied with. These can be placed around the seat and then allow the bag to make these tight.
We recommend additionally still motorcycle model special pannier spacers to order (it is not mandatory). These prevent namely that the bag can get contact with the wheel.
The Outlaw Bags are made of very high quality & durable genuine leather.
Dimensions closed: 40 x 28 x 13cm / Dimensions opened: 40 x 40 x 13cm.Also included is a rain cover, which can be pulled over the bag in heavy rain.
Zubehoertsche LA1
Eine kleine Zubehoertsche die man zusaetzlich an fast allen Legend Gear Sachen befestigen kann. Man kann sich die Tasche z.B. auf den Tankriemen machen, auf alle Tankrucksaecke, auf die 1,2 l. Zubehoertasche oder den Halter fuer die Satteltaschen. Perfekt um kleinigkeiten die schnell griffbereit seien muessen zu verstauen.
Spezifikationen:
Passend zu Legend Gear Hecktaschen, Satteltaschen und Tankrucksaecken
Auch an Satteltaschen-Halter SLS und Tankriemen SLA nutzbar
Einsatzerprobtes Befestigungssystem mit einer Kombination aus Halteschlaufe und Sicherungsriemen
Praktischer Klettverschluss
Auf individuelle Beduerfnisse des Fahrers abgestimmte Gepaeckloesung, da die Zusatztaschen in unterschiedlichen Groessen erhaeltlich sind und sich an nahezu allen Legend Gear Produkten befestigen lassen
Material: Napalon-Kunstleder & gewachstes Canvas-Gewebe, PU-Innenbeschichtung, Regenhaube aus 210D Polyamid, zweifach PU-beschichtet.
Groesse: 12 x 6 x 18 cm (B/H/T)
Volumen: 0,8 l
Lieferumfang:
Legend Gear Zusatztasche LA1
Wasserdichte Regenhaube
Wichtiger Hinweis:
Zum Schutz der Naturfaser vor Witterungseinfluessen empfehlen wir, die Baumwolltextiloberflaeche des Produkts in regelmaessigen Abstaenden bzw. nach intensiver Reinigung mit einer handelsueblichen Wachsimpraegnierung (z.B. von Fjaellraeven) zu impraegnieren.
Zusatztasche LA2
Eine kleine Zubehoertsche die man zusaetzlich an fast allen Legend Gear Sachen befestigen kann. Man kann sich die Tasche z.B. auf den Tankriemen machen, auf alle Tankrucksaecke oder den Halter fuer die Satteltaschen. Perfekt um kleinigkeiten die schnell griffbereit seien muessen zu verstauen. Zusaetzlich kann man auf diese Tasche noch die zweite Erweiterungstasche oder die Handytasche befestigen (siehe Zubehoer)
Spezifikationen:
Passend zu Legend Gear Hecktaschen, Satteltaschen und Tankrucksaecken
Auch an Satteltaschen-Halter SLS und Tankriemen SLA nutzbar
Einsatzerprobtes Befestigungssystem mit einer Kombination aus Halteschlaufe und Sicherungsriemen
Umlaufender Reissverschluss
Auf individuelle Beduerfnisse des Fahrers abgestimmte Gepaeckloesung, da die Zusatztaschen in unterschiedlichen Groessen erhaeltlich sind und sich an nahezu allen Legend Gear Produkten befestigen lassen
Material: Material: Robustes Napalon-Kunstleder & gewachstes Canvas-Gewebe, wasserabweisende PU-Innenbeschichtung. Regenhaube aus 210D Polyamid, zweifach PU-beschichtet mit Sichtfenster aus 0.2 mm PVC-Folie.
Groesse: 15 x 5 x 18 cm (B/H/T)
Volumen:1,2 l
Lieferumfang:
1 Legend Gear Zusatztasche LA2
1 Wasserdichte Regenhaube
Wichtiger Hinweis:
Zum Schutz der Naturfaser vor Witterungseinfluessen empfehlen wir, die Baumwolltextiloberflaeche des Produkts in regelmaessigen Abstaenden bzw. nach intensiver Reinigung mit einer handelsueblichen Wachsimpraegnierung (z.B. von Fjaellraeven) zu impraegnieren.
Legend Gear Smartphone bag LA3
A practical smartphone bag which can be used on all Legendgear tank belts, tank bags or on the additional bag. Since the mobile phone is almost a navi. In the bag is also a portmorneee intigrated to have the necessary small money on the tour.
Additional pocket for smartphones with a display up to 5.5
PVC viewing window allows touch operation
Additionally inside: Money box and three credit card slots
Suitable for Legend Gear bags, saddlebags, side pockets and tank bags. Can also be used on saddlebag holders SLS and tank belts SLA.
A tried and tested fastening system with a combination of the retaining loop and the securing strap
Round zipper
Material: Durable Napalon artificial leather, water resistant PU inner coating
Size: 9.4 x 2 x 18 cm (W / H / D)
Legend Gear shoulder strap LA4
The Legend Gear shoulder strap LA4 complements the retro luggage portfolio of SW-MOTECH. With the shoulder strap in a timeless design, saddle bags, tank bags and rear pockets of the Legend Gear series can easily be converted into a practical shoulder bag.
In addition, all three accessory pockets can be attached to the shoulder strap (see accessories)
Padded shoulder strap provides increased comfort
Straps allow a secure and flexible attachment of additional pockets
Sturdy holding hooks made of anodized aluminum
Fits Legend Gear bags, saddlebags and tank bags
The length of the shoulder strap can be varied between 90cm and 150cm via 2 belt adjusters
Material: Durable Napalon artificial leather, polyamide strap, anodised aluminum
Dimensions: 3.8 x 150 (90) cm (W / L).
Delivery:
Legend Gear shoulder strap LA4
This template has exactly the same dimensions as the screw connections of the SW-Motech SLC holders.
So it is easy and fast to transfer the hole pattern perfectly to any bag to screw it to the stylish SW-Motech holders.
Swing bag in a combination of high-quality waxed cotton and leather. It has a capacity of 2-3 litres (ideal for storing small things on a short tour) and is attached to the swingarm on the left side of the motorcycle. A holder for mounting the bag is included in delivery.
Real leather bag for mounting on cross handlebars or a handlebar cross brace.
Looks cool and is very practical. Who does not know it, you ride a short round with your bike and have your mobile phone, wallet, keys or similar in your pocket. All the time you grab your leg to make sure that nothing falls out of your pocket. With this small bag, the problem is solved.
It also gives the handlebars of your bike a really nice look.
Only works with bolted handlebar struts, not with cross handlebars with welded-in handlebar struts.
Luggage rack incl. passenger grab handles from Unit Garage in Italy. Suitable for Triumph Scramber 1200 / Speed Twin 400 / Scrambler 400 X
Scrambler 1200:Suitable for the Unit Garage Top Case (see accessories in this description).The stainless steel luggage rack is at least as high quality and precise as the Triumph holder. The UG holder has the added advantage that it is available in both silver and black and that there is also a matching aluminium top case for it. The aluminium top case must be ordered separately. Maximum load according to the manufacturer: 10 kgSpeed Twin / Scrambler 400:According to the manufacturer, the luggage rack for the 400cc models has a maximum load capacity of 15kg.The aluminium plate included in the scope of delivery can be removed. If you want to mount a top case, you will need an extra mounting plate. Please contact us personally for further information. The required mounting material and assembly instructions are included in the scope of delivery for all models.
Suede side bag suitable for all Scrambler 1200 models with bottom-mounted exhaust. If you move the exhaust of your Scrambler downwards, the original side bag looks rather unsightly. This handmade, 3mm thick leather bag from Unit Garage in Italy closes this unsightly gap and makes the Scrambler look good again.
The small bag is also a very practical companion. The bag has 3 elastic bands inside the lid, under which you can quickly stow things (such as a wrench or sunglasses). There is also a pocket hidden under the zipper where you can stow the essentials for a short trip.
The bag is waterproof.
The SW Motech Dry Back rear bags are very high quality universal luggage rolls that are the perfect companion when you need extra storage space on motorbike tours. Available in 3 different sizes. The practical luggage roll is ideal for all weather conditions, is easy to clean and also serves as a casual travel bag if required. The bottom of the Drybags is firmly welded in, the waterproof outer pocket offers additional storage space for your luggage and things that need to be quickly accessible.The luggage roll is simply attached to the pillion area of a seat or a luggage rack. We recommend lashing straps for this.Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorbike, regardless of the payload. The Drybags are completely waterproof and have a high UV resistance. The new strap arrangement makes it easy to combine with other Drybag models on the pillion seat or luggage rack.
- Welded outer pocket- Universal fit for almost all motorbikes- Made of robust 500D PVC- Waterproof, extremely robust luggage roll- Easily compressible due to elastic texture- D-rings allow the bag to be pulled tightly against the motorbike- Integrated handle on the side- Waterproof roll closure and taped seams- Reflective details for increased safety in road trafficScope of delivery:- 1 x Drybag tail bag- 2 x loop straps- 1 x paint protection film- Fitting instructionsDetails:- Material: 500D Polyester- Surface: PVC-coatedSizes: 26 litre version: dimension 50,0 x 26,0 x 26,0 cm / weight: approx. 1,2kg 35 litre version: size 58,0 x 28,0 x 28,0 cm / weight: approx. 1,2kg60 litre version: size 71,0 x 33,0 x 33,0 cm / weight: approx. 1,4kg
Unit Garage side bag bracket for all water cooled Triumph Modern Classic models. The Unit Garage bag holder is needed to mount a Unit Garage side bag. All Unit Garage side bags from our range fit to the holder.
The UG bag holders are made in a nice minimalist way so that they are as unobtrusive as possible without the bag mounted on the bike.The bag system from Unit Garage is a very well thought out. The side bags are simply hooked into and unhooked from the holder with a flick of the wrist. In addition, a lock is integrated in all bags to protect the bags from theft when mounted.
Included in delivery are all fastening materials, you are necessary for mounting.
We would like to produce aluminum sheets that we have punched at certain points in addition to laser cutting and edging.Like your underguard, for example.
Model special noteStreet Scrambler: The bracket on the right-hand side does NOT fit on the Scrambler. Only fits if a lower exhaust is fitted.
Speed / Scram 400: Only fits on the exhaust side (right) if a short, low exhaust, such as the one from Unit Garage, is fitted.
The 18 litre Khali multi-purpose bag is a very practical, lightweight and waterproof bag for various uses.First and foremost, it is very practical as an inner bag for all side bags to keep the contents of the bag dry (because most motorbike bags are not waterproof).But it is also perfect as a practical carrying bag when you are moving away from the bike and don't feel like taking the whole side bag with you.
The Khali bags are 100% waterproof and have 100% waterproof zips.
Materials: High frequency heat sealed TPU- TPU is the latest generation material that makes PVC obsolete . It is a composite material with excellent elasticity, toughness, wear resistance and non-toxic.
Dimensions: 24 x 40cmVolume: 18 litresWeight: 0,15kg
This practical genuine leather messenger bag is made in the style of the old Swiss army bags.
The bag has a really very practical size to get things you need for a small day trip or the daily ride to work with.
100% genuine leather handmade. The bag has two inside pockets and a small pocket on the back. The perfect shoulder bag for the bike! Effortlessly carry an iPad, camera, rain gear or anything else.
The shoulder strap, which is included, is of course adjustable in length.
Also included are leather straps to attach the bag to the rear frame of your motorcycle.
Since the bag is quite small, is not necessarily a luggage spacer necessary (but who wants to be completely on the safe side, that the bag can never get contact with the wheel or tire, we recommend luggage bag spacers from our range to order. These can be found under the accessories in this description).
Handmade leather side bag including holder.
This bag is handmade from 100% leather in Spain.
Included is a black powder coated steel holder for the left side of the motorcycle. The bag can then be easily attached to this.Required mounting material of course included.
It also comes with a leather shoulder strap that turns the bag into a shoulder bag in seconds.
The Tamarit leather bag is a stylish and classic briefcase. Swing in the morning in the elegant suit, ride your bike to work, the laptop in the leather briefcase and off you go to the office (like in Hollywood movies).
Dimensions of the bag: 35×30 cm
The Oaks & Phoenix Bag is probably the most versatile bag in our range. It can be used as a normal backpack as well as a saddle bag and/or tank bag.
Handcrafted from very thick & high quality buffalo leather, the bag comes as a very practical backpack including shoulder straps.
As optional accessories there are 3 holding systems specially designed for motorbikes (all three can be found under the accessories in this description).
Variant 1 / Oaks Saddlebag Holder: These straps allow a quick and easy mounting of the Oaks Bag as a saddlebag on the seat of your bike. For a detailed description and a mounting video of these straps, please go to the article.
Variant 2 / Oaks tank bag holder magnetic: This holder allows a very quick mounting of the Oaks bag on the tank of your bike with the help of very strong magnets. For a detailed description as well as an assembly video of these straps, please go to the article.
Variant 3 / Oaks tank bag holder strap: This holder allows you to attach the Oaks Bag as a tank bag to the tank of your bike. It is attached in the classic way with straps. For a detailed description and an assembly video of these straps, please go to the article.
The bag is equipped with nice thick and high quality 8mm metal zips. This in combination with the thick buffalo leather ensures that the bag will be a companion for a lifetime. If cared for properly, the bag will be a companion for life.The beautifully long zips, which allow the backpack to be almost completely unfolded, as well as a laptop, an ipad + 3 further inside pockets ensure that you can sort your luggage perfectly.
The stylish genuine leather bag becomes more and more beautiful over the years and through use, as the leather acquires a beautiful pattina.
Dimensions: H: 44cm L: 27cm D: 12cm
Heavy Duty Real Leather Handmade in Italy!Meaning? Really thick, handmade leather that can survive one or even several lives!The case is very stiff due to the thick leather. This makes it perfect to mount it on a luggage rack, on the passenger area of a seat or similar. You can mount the case both lying and standing.It can be fastened either with the two leather straps that run all around or additionally secured with cable ties. Alternatively, you can also fix it with screws (the leather is thick enough to drill a hole into it and then screw the case tightly over it).Dimensions: L x W x H : 20 x 22 x 14cm (outer dimensions).
Universal bag adapter that fits on various bags (e.g. the Oldschool luggage cases from our assortment) to attach them to the Legend Gear SLC holder. With it you can turn any bag into a modern motorcycle luggage system, which can be mounted on and off in a few seconds. A further advantage of this system is that the SLC holders are not so noticeable visually, so that they can also remain mounted on the motorcycle.Size of the adapter plate: 30 x 22 cm
The matching Legend Gear SLC Side Pocket Carrier must be ordered separately & model specific (see accessories in this description).
Easy attachment of the adapter plate to the eyelets on the back of the bag with four screws.
Only one handle: quick-release system of the adapter plate guarantees secure hold of the bag on the holder
Model-specific SLC side rails are available separately
Comfortable opening of the quick-release fastener via a drawstring
Adapter plate is optionally available for the left or right side
Before the first use the quick-release fastener is mounted to the adapter plate and this to the bag.
Mounting material + mounting instructions are included in the scope of delivery
These universal bag holders are suitable for attaching any kind of bag.It is simply screwed under the seat on the frame and on the strut. Then you can attach any bag to it.
ATTENTION for Bonneville models: For the Bonneville T100 / T120 fits this holder ONLY if a flatter Sitzbak is installed such as the Cool Seat / Viper Seat / Silverstone / VIntage Slim Seat / Street Twin seat etc..
Handmade tool bag made of very high quality genuine leather.A very practical tool bag, with many small loops and single bag to sort your tool kit neatly. Perfect for this is our tool set (see accessories in this description).On every tour it is important to have at least the most necessary tools with you. If you put this in a stylish bag like this one, attach it nicely to your bike and make it even more beautiful, you have killed two birds with one stone!
The Toolbag is by its loops on the back simply in many different places of the motorcycle to fasten.
DIMENSIONS: 43 X 27 cm when open ; 17 X 27 cm when closedTranslated with www.DeepL.com/Translator
SLC side support for water-cooled Triumph models.
Attention for the Bonneville models: Who has NOT mounted the original bracket, must order the additional adapter "Adapter Bonneville LC SLC carrier without bracket". This can be found under the accessories in this description.If a flat seat (such as the Cool Seat, Silverstone, Viper) is also mounted, the holder for Street Twin must be ordered.
The precise, model-specific development of the SLC side brackets allows easy and safe mounting at original mounting points on the vehicle. Using a quick-release fastener system, the Legend Gear side bags can be attached and removed in just a few easy steps, without the rider having to sacrifice reliable bag attachment.
Model-specific shape allows easy mounting on one or two sides, also suitable for bikes with overhead exhaustThe SLC side support made of sturdy tubular steel guarantees a secure hold and removal of the Legend Gear side pockets in seconds (see accessories)Material: steel tubeNote
The SLC side support is also compatible with the universal side support for fastening all kinds of things.Tip: As an alternative to the SLC side support, for example for conversions and custom bikes, the universal Legend Gear SLS saddle bag holder is a good choice.Scope of delivery
1 SLC side supportAssembly material
Toolbag for attachment to the frame, handlebar or other places.
This bag is much more than just a tool bag. In the handy pocket can be transported also wallet and Smartphone safe transport.
Multifunctional fastening thanks to various loops and lashings
Also wear as a belt or shoulder bag possible, belt included
Robust zip fasteners and Velcro straps secure pocket contents
Zipper compartment and drawers for pens or similar. In the interior of the lid
Exterior pocket with water-repellent zipper on the back
Padded interior compartment
24 x 7 x 11 cm - 1.6 l
Material: Napalon imitation leather & waxed canvas, water-repellent inner coating, hook in anodised aluminum
Color: Brown / Black
Delivery:
Legend Gear Tool Bag LA5
4 Lashing straps
Shoulder / waist belt
Finally there is also a nice tank strap made of genuine leather for the original tanks.
The cultivation is very simple. With a transparent bag to pack your cell phone and drive eg with mobile phone, suitable for different sizes. (In the pictures is an iPhone 6 + in it, that's the maximum size that goes in).
The Antrahzit is an antique colors, which is already easy in the Richtugn black (that is, a very dark Antrahzit).
The dimensions of the mobile phone bag are approx: 160 x 80mm
Finally there is also a nice tank strap made of genuine leather for the original tanks.
The cultivation is very simple. With a small integrate pocket for eg key purse or similar.
The Antrahzit is almost a black but has a slight gray stitch (if you really want to have deep black, the belt can simply be creamed with black leather cream).
Leather luggage bags with black holder in vintage style for Bonneville T100 / T120 and StreetTwin, StreetCup & StreetScrambler (for the Scram only for the left side because of the exhaust).
The bag has a large inner compartment that you get enough for a tour (and a small inside pocket for small items). Who ever goes on a longer tour and left + right mounted a bag, which gets enough luggage in there. On long trips, we recommend the clothes or other things that are not allowed to get wet in bags or to make a rain cover over the bag.
The bags are supplied with a holder for the motorcycle and shoulder straps to carry when you take off the bag.
The leather is a beautiful genuine leather in a rustic look. It is the same leather as some of the benches we have in the program and the tank strap (see accessories). These things can therefore be installed together optimally.
The Antrahzit is an antique color, which is already easy in the Richtugn black (ie a very dark Antrahzit, who wants to have it really dark, should treat the bag with black leather grease).
Since the bags are made by hand and small series, they are now and then unfortunately not in stock.
Leather tank straps in slim design. Beautifully small and discreet, the belt looks like a chic belt.The assembly of the belt is very easy.The belt is available in black, dark brown & light brown.In addition, there are as optional accessories still 2 different bags (see accessories article in this description) which can be attached to the property. You only have to open the buckle on the manor and you can slide the bag open.There is a cell phone pocket as well as a pocket with zipper to store small things like wallet, keys, cell phone etc. Looks cool and is very practical!
Seat bar and luggage rack chrome-plated Bonnie - tubular steel seat bar for your passenger with integrated luggage rack for up to 3 kg weight.
The original, attached seat bracket is required for mounting.
Classicbike-Raisch recommendation: Alternatively, we recommend one of the two Motone luggage racks. They have a higher quality finish and are better thought out. You can find them under similar articles below this description.
Luggage bridge. High quality, prefabricated tubular steel luggage rack with seat bracket for your pillion and tie-down points for increased safety.
Does NOT fit with the Triumph Bonneville T100 / T120 original & comfort seat. Fits with the Street Twin original seat and also all accessory seats (except Bonneville comfort).
Classicbike-Raisch recommendation: Alternatively, we recommend one of the two Motone luggage carriers. They have a higher quality finish and are better thought out. You can find them under similar articles below this description.
Original Triumph luggage bags.Single robust, water-repellent luggage bags made of PU-coated leather and waxed cotton.The bags each have a capacity of 13.8 litres and are supplied complete with the matching fastening straps. However, additional holding brackets are required (see accessories in this description).We also recommend ordering the separate rain cover for journeys in heavy rain (see accessories in this description).The bag is available in black/brown and olive green.
Attention! Does not fit with the Bobber & Speed Master together with the swingarm pocket on the same side)
A rain cover keeps your tankbag or luggage bag and its contents dry even in a strong downpour. The scope of delivery includes a bag with a logo for the compact storage of the cover in the tankbag when it is not needed. With transparent window for use with the cardboard bag of the tankbag
Wild Hog leather bag RCA made of heavy and thick bull leather. A bag that lasts a lifetime if not two, with proper care.
Height: 27 cm, length: 25-34 cm, depth 10 cm. Enough for a rain suit and a few cans of Bölkstoff. included.
The bag can be used as a universal motorcycle bag. We recommend for mounting the SW-Motech Legend Gear luggage holders. On these you can either screw the bag firmly (for this we recommend the template to order) or you order the SW-Motech bag adapters, with these you would then have a quick mounting system.The parts you will find all in the accessories articles in this description.
Luggage holder pair Very high quality (CNC milled + stainless steel screws) and extremely practical. Simply screw on to the upper spring support. With all screws
This aluminum luggage rack is mounted in place of the original Sizus seat cushion. Installation is very simple with 3 screws.
The bridge gives the rear of the Scrambler a much nicer look and is also practical if you want to put some luggage on the back.
The part can also be coated black at the customer's request. Please contact us for more information.
This small leather bag with zipper and retaining strap on the back is a small bag that can be attached in many places with its strap.
It is primarily intended to be attached to the tank straps. However, it can also be used as an accessory bag for a rucksack or side pocket.
Unit Garage 36L aluminum suitcaseA classic and sturdy case with high quality steel hinges and beautiful details. Details created for adventure and can withstand all conditions. The lid has fixings inside and a rubber band is included as a holder for gloves, documents and small items. The lid holder is made of leather with removable snaps. The latch is designed to accept an additional padlock in addition to the one included. The case body is fully lined with durable 2.5mm neoprene that absorbs shock. The hinges, locks and all details are made of electropolished stainless steel, which you won't find in any similar product on the market. The corners are made of sturdy ABS, which can be replaced in case of a fall, as well as every single component. All Unit Garage aluminum bags are completely Made in Italy and are individually assembled by hand.
- Sufficient space to accommodate a full-face helmet- Body and lid made of high-strength aluminum alloy with a thickness of 1.5 mm.- High quality stainless steel for locks, hinges, screws: electropolished and galvanized accessories.- ABS corner protectors replaceable in case of fall- Dust protection for the lock cylinders- Double gasket on the lid and on the body of the case- Top case can be opened and detached from the bike with a single key- Finish: matte black
Note: Bags of this type are not IP67 (which would mean 100% waterproof), it is always advisable to use a waterproof container inside to protect your luggage.
Dimensions: Height 310mm, width 400mm, depth 320mm. Volume: 1 x 36L Weight: 6.5 kg
Triumph original luggage carrier with passenger handles, made of pressed aluminium, suitable for Triumph Scrambler 1200 XC / XE.
Such a luggage carrier is simply practical for every tour as well as for everyday use. Very practical and uncomplicated with lashing straps things on the carrier lash (eg a luggage roll). In addition there are handles for the passenger.
A massive luggage carrier also fits optically very well into the Scrambler line.
The manufacturer gives a maximum load of 2kg (which is exaggerated from our technical point of view). On our own carrier at our scrambler we lash much more weight).
Can also be installed in conjunction with the SW-Motech and Unit Garage side bag carriers.
This accessory bag can be attached to the Slim tank straps as an accessory bag.It is attached to the belt within seconds.Looks cool and is very practical to take a few small things like cell phone, wallet etc. with you. Because who doesn't know the constant and annoying grip on the trouser pocket, if all things are still there.
This leather cell phone bag can be attached to the Slim tank straps as an accessory bag.Is attached to the strap within seconds.Very practical to use a cell phone navigation system.
We at the Classicbike-Raisch Team are all motorcycle riders through and through and have all covered tens of thousands of kilometres on our Triumph or BMW motorcycles. Some of them are week-long tours with overnight stays in nature. On such long tours, a good luggage system is an absolute must. We don't offer a luggage system that we don't install ourselves and test extensively. If you need detailed advice on what the right system is for you and your needs, please feel free to contact us personally; we will be happy to help.