Rizoma Namic mirror
CB12727M / 600
From
€269.00*
Rizoma Namic mirror with E-number. Probably the highest quality and most elegant mirrors in our range.
The mirror is made from very high-quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milled structure. You can see and feel the high quality of these mirrors at first glance. Thanks to the ingenious mounting system that Rizoma uses here, the mirror does not protrude so far upwards and look like mouse ears. It runs nice and flat over the handlebars. The shape is a beautifully classic teardrop shape.
The mirrors are sold individually.
Model specific mounting instructions: An additional adapter is required for all models.
BMW motorcycles:The Riz mirror adapter RadialRS + Dynamic BMW is required for mounting on the original mount of BMW models (see accessories in this article).
Water-cooled Triumph LC models: An additional, model-specific adapter is required to mount the mirror (see accessories article in this description). 1. adapter "Riz mirror adapter for fittings with hole", which is suitable for all models that have a hole in the fitting ex works for the mirror mount 2. adapter "Riz mirror adapter for fittings with thread", which is suitable for all models that have a thread for mirror mounting on their fittings ex worksThruxton 1200 R / RS - Speed Twin 1200 - Scrambler 1200: These models do not have a mirror mount ex works. In addition to the adapter 2, the adapter mirror adapter "Thruxton R / Speed Twin / Scrambler" is also required
Air-cooled Triumph AC models: The "Riz mirror adapter for fittings with hole" adapter is required for all AC models.
LSL Classic Spiegel - Paar
CB12626 / 600
€139.95*
Ein Paar klassische Aluminium Spiegel aus dem Hause LSL.
Die LSL Classic Spiegel kombinieren ein klassisches, rundes Design mit moderner Technik und Verarbeitungsqualität. Das Spiegelgehäuse ist mit knapp 10mm schön flach, aber auch nicht zu flach, weil zu einem klassischem Umbau ein Spiegel auch nicht zwingend maximal flach seien muss.Spiegelgehäuse und Spiegelarm sind in einer schönen, matten Oberfläche (wird durch Glasperlen strahlen erreicht) hergestellt.
Der Spiegelarm hat an der Verschraubung eine sehr praktische Winkel Verstellung eingebaut, das es ermöglicht den Spiegel individuell im Winkel einstellen zu können.Für die Optik ist das ein wichtiges Detail, denn so stehen die Spiegel nicht so weit nach oben ab (was sonst schnell aussieht wie Mickymaus Öhrchen).
ACHTUNG, für manche Modelle werden Modell spezifische Adapter benötigt (einige sind unter den Zubehörartikeln dieser Beschreibung zugeordnet), wenn ihr euch nicht sicher seid, ob ihr welche benötigt oder nicht, ruft uns einfach an wir helfen gerne weiter.
Maße: A/B Breite Kopf: 102 mm C Gesamtbreite: 180 mm D Gesamthöhe: 170 mm Stiellänge: 100 mm bis zum Knick, dann 100 mm bis zum Gelenk Gewicht: 210 g Lieferumfang: 1 Paar inkl., 2x M10x 1.25mm Rechtsgewindeadapter 1x M10x 1.25mm Linksgewindeadapter
Motone Triline - Handlebar end mirrors
CB12613M / 2
From
€129.95*
Motone Triline handlebar end mirrors - WITH E-number - road legal.
The new Triline aluminum handlebar end mirrors from Motone (England) are visually very beautiful, classic mirrors that perfectly match our classics.The Triline design paired with a matt, black anodized surface give the mirrors a very special look.
The mirrors are not only a visual highlight, they are also technically top class. The Motone mirrors are the flattest mirrors with mirror glass known to us.The workmanship and the surface of the mirrors are also top class. The mirror glass used is highly scratch-resistant R1400 convex automotive glass. This has the advantage that a very large reflection angle is achieved (very good overall view to the rear).
The mirrors are available in 2 sizes:- Size S (80mm diameter) WITHOUT E-number - Size M (100mm diameter) WITH E-number - road approval
Mounting options for the mirrors: - The mirrors are supplied with 2 different adapter rings so that the mirror can be clamped onto any handlebar with a 1" or 22mm diameter.If the mirror is clamped around a hollow accessory handlebar, we recommend the "Rizoma cap end weights" for a perfect finish (see accessory article in this description).- If you cannot clamp the mirror directly around the handlebars due to space problems, we recommend the "Handlebar extension - Motone", which can be installed in any hollow original handlebar. These then also serve as a clean handlebar end.
Model specific mounting instructions with original handlebars:
Water-cooled Triumph models - LC: The mirrors can be fitted plug & play to all original handlebars on Triumph LC models. To have a nice handlebar end we recommend the "Handlebar end caps Gemini" (see accessories in this description)
Air-cooled Triumph models - AC:To mount the mirrors on the original handlebars, a handlebar extension is required. We recommend the "Handlebar extension - Motone". An M5 screw is also required (if you do not have this yourself, please contact us). You can find the handlebar extensions under the accessories in this description.
BMW models:There is currently no solution for mounting the mirrors on the original handlebars.
Motone Turismo - Handlebar end mirrors
CB12615M / 2
From
€109.95*
Motone Turismo handlebar end mirrors - WITH E-number - road legal.
The new Turismo aluminum handlebar end mirrors from Motone (England) are visually very beautiful & clean mirrors. The glossy black surface paired with the clean look provide a nice mix of modern design and a classic round shape.
The mirrors are not only a visual highlight, they are also technically top class. The Motone mirrors are the flattest mirrors with mirror glass known to us.The workmanship and the surface of the mirrors are also top class. The mirror glass used is highly scratch-resistant R1400 convex automotive glass. This has the advantage that a very large reflection angle is achieved (very good overall view to the rear).
The mirrors are available in 2 sizes:- Size S (80mm diameter) WITHOUT E-number - Size M (100mm diameter) WITH E-number - road approval
Mounting options for the mirrors: - The mirrors are supplied with 2 different adapter rings so that the mirror can be clamped onto any handlebar with a 1" or 22mm diameter.If the mirror is clamped around a hollow accessory handlebar, we recommend the "Rizoma cap end weights" for a perfect finish (see accessory article in this description).- If you cannot clamp the mirror directly around the handlebars due to space problems, we recommend the "Handlebar extension - Motone", which can be installed in any hollow original handlebar. These then also serve as a clean handlebar end.
Model specific mounting instructions with original handlebars:
Water-cooled Triumph models - LC: The mirrors can be fitted plug & play to all original handlebars on Triumph LC models. To have a nice handlebar end we recommend the "Handlebar end caps Gemini" (see accessories in this description)
Air-cooled Triumph models - AC:To mount the mirrors on the original handlebars, a handlebar extension is required. We recommend the "Handlebar extension - Motone". An M5 screw is also required (if you do not have this yourself, please contact us). You can find the handlebar extensions under the accessories in this description.
BMW models:There is currently no solution for mounting the mirrors on the original handlebars.
Handlebar end mirror kit - Scrambler 1200 - LSL
CB12590.1M / 2
From
€84.95*
LSL handlebar end mirror kit suitable for Scrambler 1200 models with original Triumph handguards.With E-number (road approval).The mirror is sold individually. If you want to drive a left + right mirror, you need to order two.
This kit put together by Classicbike-Raisch includes suitable mirror adapters, LSL retro mirrors and suitable mounting material to be able to mount the LSL retro mirror together with the original handguards. Thanks to the variable adjustment option of the mirror arm, the retro mirror can be positioned straight up/down or tilted outwards or inwards.
By moving the mirrors to the outside of the handlebars, the handlebar section of your Scrambler gets a much flatter line, as the chunky original mirrors no longer protrude as far upwards as two Mickey Mouse ears. We also feel that the view to the rear is better, as you have a clear view and no longer have to pull in your shoulders.
The mirror kit for the Scrambler is also available with Rizoma mirrors. This kit is a good deal more expensive, but the mirrors from Rizom are also of a higher quality.
Handlebar end mirror kit - Scrambler 1200 - Rizoma
CB12591M / 2
From
€159.00*
Rizoma handlebar end mirror kit suitable for Scrambler 1200 models with original Triumph handguards.With E-number (road approval). Except for the retro mirrors, which are too small and have no E-number.The mirror is sold individually. If you want to drive a left + right mirror, you need to order two.
This kit put together by Classicbike-Raisch includes suitable mirror adapters, very high-quality Rizoma mirrors (there are various models to choose from) and suitable mounting material to be able to mount the LSL Retro mirror together with the original handguards. Thanks to the variable adjustment option of the mirror arm, the retro mirror can be positioned straight up/down or tilted outwards or inwards.
By moving the mirrors to the outside of the handlebars, the handlebar section of your Scrambler gets a much flatter line, as the chunky original mirrors no longer protrude as far upwards as two Mickey Mouse ears. We also feel that the view to the rear is better, as you have a clear view and no longer have to pull in your shoulders.
Motogadget Mirror / Screw Kit
CB12279 / 600
€6.99*
This kit allows the installation of all Motogadget standard mirrors on the Triumph models with 1" handlebars.
Since these motorcycles ex works have no thread, but only a hole as a mirror mount, you can install most accessory mirrors only if you screw in an adapter.The problem with all adapters is that these usually build up quite high, the mirrors thus protrude further, not directly at the armature (in summary: it just does not look nice with adapter).
This special screw kit ensures that the mirrors can be easily and directly screwed to the Triumph dashboard.
All mirrors suitable for this kit can be found in the accessories articles in this description.
Motogadget M.View Bar Adapter Triumph
CB12269 / 600
€39.00*
The Motogadget M.View Bar Adapter Triumph, allows you to mount all Motogadget bar end mirrors on the original handlebars of your Triumph.
These caps have an M6 thread and can be screwed into the thread of the original handlebars. The mirror is then simply clamped around the end of the original handlebars. Since most Triumph fittings are not mounted all the way on the outside of the handlebars, but a bit to the inside, the Motogadget caps do not have a concave shape. This ensures that there is not a large gap between the mirror, the armature and the end of the handlebar.
The cap has the exact matching outer diameter as well as the exact same design as the clamps of the Motogadget handlebar end mirrors, which ensures a perfect transition.
Bar Endcaps Gemini
CB12191.1M / 600
From
€39.95*
A pair of Motone Gemini handlebar end caps made of real brass or high pressure pressed aluminum.
These caps fit on the ends of the original handlebars when no bar end mirror is installed.
The price is for a pair.
Fitting clamp with mirror thread Triumph Milled
CB12227 / 0
€39.95*
This CNC machined aluminum clamp replaces the original armature clamps. Fits all Triumph models with 22mm handlebars.
The clamps look much nicer on the one hand, because they are milled very high quality aluminum and have a beautiful, indicated T - logo. The mirror thread is M10 x 1.25 which allows you to mount all common mirrors from the accessories market as well as the original. Some models, such as the Triumph Speed Twin & Thruxton R, have no mirror thread from the factory (because they have handlebar end mirrors mounted). If you want to mount a normal mirror on such a model, you need a new adapter with thread.
Of course, such a milled clamping is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time.
The adapters are black glossy (matching the original fittings) anodized & in the aftermath, the T - logo is milled again. The clamps look very classy on the handlebars.
The threaded adapter for the mirror we have extra round Designed, which gives you a much nicer transition to most mirrors, as with most other adapters on the market, which are simply angular. To the Motogadget M.View mirrors, the transition is perfect.
The adapters are sold individually.
Fitting clamp without mirror thread Triumph Milled
CB12228 / 0
€39.95*
This CNC machined aluminum clamp replaces the original armature clamps. Fits all for all Triumph models with 22mm handlebars.
This makes sense when you convert the motorcycles to handlebar end mirrors, because otherwise you look at the open mirror thread of the original clamp.
In addition, the clamps make optically also really what her through their high-quality surface and the milled T - logo. Of course, this is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time.
The adapters are black anodized & in the follow-up, the T - logo is milled again. The clamps look very classy on the handlebars.
The adapters are sold individually.
Handlebar end cap for original handlebar
CB12050M / 600
From
€25.95*
These original Triumph handlebar end caps fit over all handlebar ends of the water-cooled Triumph models.Serve as a nice finish, for example, for someone who has converted his motorcycle from handlebar end mirrors to normal.
Since the models have different lengths handlebar ends, the caps do not provide a 100% perfect finish on all models. For the SpeedTwin, for example, the cap is not quite on the handle, it remains a small gap (as with the original mirrors also). Therefore here the measure of the capWidth / depth you goes over the handlebar: 13mm
The caps are sold INDIVIDUALLY.
Motogadget Disc / Cone Adapter
CB12033 / 600
€99.00*
Motogadget handlebar extensions that allow all Motogadget M.View handlebar end mirrors to be mounted without having to move the fittings on the handlebars further inwards.In addition, the Motogadget M.Blaze Disc handlebar end turn signal can be mounted on the outside of the adapter.
It creates a clamping surface for the handlebar end mirror outside the steering tube and at the same time allows the mounting of the handlebar end turn signal. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise as well as mo.view street.
It is CNC machined from billet aluminum and anodized black. The clamping in the handlebar end is done by tightening a M6 screw inside the adapter, which expands the clamping pieces and allows a stable mounting. Then the mirror clamp on the adapter is tightened and thus simultaneously clamped the handlebar end turn signal.
The bar adapter uni disc/cone comes with two clamps for the left and right side of the handlebar. They fit perfectly to our grips mo.grip as well as the push button fittings mo.switch basic and mo.switch mini.
They are mounted directly in the end of the handlebar (22 mm, 7/8 and 1 inch) with a free inner diameter of 12 to 21 mm (without internal thread) and a length of 90 mm.
Dimensions:Fits all handlebars with 22 mm, 7/8 and 1 inch with a free inner diameter of 12 to 21 mm.Total length: approx. 105 mm, at least 90 mm free inner tube length requiredWidth of clamping surface for mirror: 8 mm, fits all mo.view handlebar end mirrors Diameter of clamping surface: 1 inch, fits all mo.view handlebar end mirrors Weight (1 piece): 55 g
Scope of delivery:2 x bar adapter uni disc/cone, instructions
Attention does not fit on motorbikes with original handlebars that are not hollow from the inside (which is the case with almost all original handlebars).
LSL Handlebar weight Retro
CB12020M / 10
From
€29.95*
These chic end weights of the brand LSL fulfill several functions.
On the one hand, they serve as a chic handlebar end to the other, they serve as a handlebar widening to mount all handlebar end mirrors that have a clamping diameter of 29.8mm.
Who wants to use the weight only as a handlebar end and not for mounting mirrors, we recommend the matching handlebar weight ring to order (see accessories in this description).
The weights are equipped with universal expansion dowels, which allow them to mount in almost all common accessory handlebars. Fits all handlebars with an inner diameter of 12 - 22mm.
The weights are fine glass bead blasted before anodizing, giving them a very classy, slightly matte finish. In addition, they are supplied with a small cap, which comes into the clamping screw in front of head, which hides the screw head.
Dimensions: Handlebar weight Ø: 36.6 mm Width: 20.5 mm
Holder for handlebar end mirrors with outer clamp: Diameter: 29.8 mm Width: 12 mm
Weight: 72 g
Scope of delivery: 1 pair, incl. mounting material 2 x clamping sleeves each with Ø 12 and 16 mm 2 x spacer sleeves each with Ø 14, 18 and 21 mm 2 x M6 central screws2 x M6 cone nuts
__________________________________________________
Note for mounting on BMW R9T models with original handlebars: The R9T original handlebars have a M10 internal thread. This can be drilled to 12mm, then it is possible to use the weights in combination with the original handlebar.
LSL Barend Retro Mirror - vario
CB12022.1M / 8
From
€64.95*
The LSL Retro mirror stands for classic, high-quality design combined with state-of-the-art functionality. With E-Certification Functionality means in the case of the retro mirror that the mirror glass is adjustable by a ball joint integrated in the mirror arm to provide an optimal view to the rear. In addition, the mirror arm can also be tilted inward, outward or straight down. So you get on the one hand an even better view to the rear to the other hand, this looks visually even better, because the mirror is not just straight up or down.
The aluminum housing as well as the arms are blasted before anodizing glass bead, which provides a very noble and slightly matte surface.
The mirror can be mounted directly around a handlebar (both 22mm and 1" clamped, for this the fittings must be pushed a bit inward) or in combination with the perfectly matching retro end weights (our recommendation). The Retro end weights, which also serve as a perfect handlebar end, can be found under the accessory items in this description.
Dimensions: A Width head: 100 mm B Height head: 100 mm C Total width: 76.5 mm D Total height: 165 mm Stem length: 120 mm Mounting screw: M5
Scope of delivery: 1 piece incl. 1 and 7/8 inch adapter
In black only in KW35 available again
LSL handlebar ends mirror retro rigid arm
CB12024.1M / 8
From
€64.95*
The LSL Retro mirror stands for classic, high-quality design.The mirror is adjustable by a, in the mirror arm integrated ball joint to ensure a good view to the rear.
The aluminum housing and the arms are glass bead blasted before anodizing, which provides a very noble and slightly matte surface.
The mirror can be mounted directly around a handlebar (both 22mm and 1" clamped, for this the fittings must be pushed a bit inwards) or in combination with the perfectly matching Retro end weights (our recommendation). The retro end weights, which also serve as a perfect handlebar end, can be found under the accessories in this description.The mirrors can be mounted both upwards and downwards.
Dimensions: A Width head: 100 mm B Height head: 100 mm C Total width: 45 mm D Total height: 185 mm Stem length: 120 mm (to fastening) Mounting screw: M4X16Weight: 208 g
Scope of delivery: 1 piece incl. 1 and 7/8 inch adapter
Handlebar end caps original handlebar LC
CB11950 / 0
€39.95*
One pair of black handlebar end caps for all water cooled Triumph models with 22mm or FatBar handlebars.
The caps have a recess in the shape of the original handlebars and can easily be slid over the ends for plug&play. They are fixed with a screw, which is included in the delivery.
Perfect for anyone who is converting their bike from handlebar end mirrors to normal ones and wants a clean handlebar end.
Brake fluid reservoir holder
CB11865M / 20
From
€14.95*
Bracket for mounting brake fluid reservoirs on the handlebar fitting. On many motorcycles the brake fluid reservoir is held in the handlebar fitting via the mirror thread. As soon as you change the mirrors (e.g. on handlebar end mirrors) this looks anything but nice. With this holder you can remove the mirror thread and you get a nice clean solution.It is also possible to mount underbar mirrors on bikes with an external brake fluid reservoir attached to the mirror thread.
The holder is available for accessory tanks (e.g. Rizoma or LSL) and for Triumph original and Triumph accessory tanks.
Mirror Mounting + Widening Valves without thread LC
CB11759 / 0
€22.95*
Mirror adapter for mounting accessory mirrors to Bonneville T100 & T120, Bobber & Speedmaster. These models do not have a conventional mirror thread in the fittings, but only a hole, therefore an additional adapter is required for mounting accessory mirrors.This adapter is attached to the mirror hole in the fitting with the screw + nut supplied. In the adapter is then a conventional M10 thread, with which almost all accessory mirrors can be mounted.In addition, the adapter is also a widening for the mirror holder by 40mm. This is also necessary for the fittings of the Bonneville, Bobber & Speedmaster, because the bore is very far inside and the original mirror has a very long arm.If you install an accessory mirror simply in the place of the original mirror (without widening) you see virtually nothing to the rear.
Underbar Mirror Kit Triumph Bobber / SpeedMaster
CB11779.2M / -1
From
€135.00*
Motgadget Underbar Mirror Kit suitable for Triumph Bobber, Bobber Black & Speedmaster with original handlebars as well as many accessories handlebars. With E-number / road legal
This mirror kit provides a really flat & cool line above the handlebar, because with these mirrors there is nothing more. An extremely cool style, because the mirrors are hardly noticeable. Because of the adjustable articulation on the mirrors, they can run flat and straight under the handlebar. Nevertheless you have a good view to the rear (better than in many other accessory mirrors which are mounted above the handlebars), because you don't have to look past your shoulders anymore, but only at your waist (but not as good as in the original ones, because they have very long mirror arms and therefore protrude far outwards).Included in the delivery is a mirrorless motogadget mirror with E-number (see below for exact mirror description) as well as a black screw and a black cap nut to mount the mirror (below) on the original mount.
When mounting the mirrors you have to be careful, because they have to be adjusted exactly, so that you have a view to the rear, but the mirror does not reach the tank when hitting the handlebar. (Mounting instructions included).
To the mirrorless mirrors:These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
Please choose the version (there are 3 different mirrors to choose from).
The pictures show the mirrors mounted on a BMW R9T.
Underbar Mirror Kit Street Twin / Scrambler
CB11981.4M / -1
From
€145.00*
Motgadget Underbar mirror kit suitable for Triumph Street Twin & Street Scrambler with original handlebars as well as some accessories handlebars. With E-number / street legal
This mirror kit provide a really flat & cool line above the handlebars, because with these mirrors there is nothing more. An extremely cool style, as the mirrors are hardly noticeable. Because by the adjustable articulated joint on the mirrors, these can run nice and flat and straight under the handlebars. Nevertheless, you have a good view to the rear (better than in many other accessory mirrors that are mounted above the handlebars), because you no longer have to look past the shoulders, but only at the waist.
Included is a mirrorless Motogadget mirror with E-number (exactly mirror description see below) and a new CNC machined mirror adapter intake.For the mirrors are 3 different versions to choose from.For the adapters are 2 different versions to choose from (standard: simple black aluminum adapters / CNC-Milled: elaborate, CNC-milled adapters in matte black anodized with milled T -Logo / The T is on the head of the underbar mirrors, which looks even better as a pure logo).Here you can find the CNC adapter, if you want to have more information about it. Photos of the two adapters you can also see below the pictures (you just have to change the version in the selection to see the different adapters).
When mounting the mirrors you have to be a little careful, because they have to be adjusted to fit exactly, so that you have visibility to the rear, but the mirror does not come to the tank when you turn the handlebars. (Mounting note is supplied).
Attention: for mounting an additional holder for the brake fluid reservoir is needed. You can find this in the accessories section of this description.
About the mirrorless mirrors:These new and beautiful Motogadget mirrors have a completely new mirror technology! They come completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is incorporated directly on the metal of the body. The aluminum itself is the mirror surface! This allows for a weightless design with no rim or frame, and the mirror body itself becomes extremely thin and light. Broken glass or glass that falls out is simply not possible! A new mirror design, which is looking for its equal on the market, but will not find! These mirrors are really an absolute highlight on any motorcycle!
Please choose the design (there are 3 different mirrors to choose from).
The pictures show the mirrors exemplary mounted on a BMW R9T. Translated with
Underbar Mirror Kit Triumph Speed Twin 1200
CB11778.5M / -1
From
€145.00*
Motgadget Underbar mirror kit suitable for Triumph Speed Twin 1200 with original handlebars as well as some accessories handlebars. With E-number / road legal
This mirror kit provides a really flat & cool line above the handlebar, because with these mirrors there is nothing more. An extremely cool style, because the mirrors are hardly noticeable. Because of the adjustable articulation on the mirrors, they can run flat and straight under the handlebar. Nevertheless you have a good view to the rear (better than in many other accessory mirrors which are mounted above the handlebar), because you don't have to look past the shoulders anymore, but only at the waist.
Included in the delivery is a mirrorless motogadget mirror with E-number (exact mirror description see below) as well as a new CNC milled mirror adapter mount.For the mirrors are 3 different versions to choose from.For the adapters are 2 different versions to choose from (Standard: simple black aluminum adapters / CNC-Milled: elaborate, CNC-milled adapters in matte black anodized with milled T - Logo / The T is on the head of the underbar mirrors, which looks even better as a pure logo).
Here you can find the CNC adapter, if you want to have more information about it. Photos of the two adapters you can also see below the pictures (you just have to change the version in the selection to see the different adapters).
When mounting the mirrors you have to be careful, because they have to be adjusted exactly, so that you have a view to the rear, but the mirror does not reach the tank when hitting the handlebar. (Mounting instructions included).
To the mirrorless mirrors:These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The pictures show the mirrors mounted on a BMW R9T.
Underbar Mirror Kit Triumph Scrambler 1200
CB11777.11M / -1
From
€135.00*
Motgadget Underbar Mirror Kit suitable for Triumph Scrambler 1200 XC & XE with original handlebars. With E-number / road legal
This mirror kit provides a really flat & cool line above the handlebar, because with these mirrors there is nothing more. An extremely cool style, because the mirrors are hardly noticeable. Because of the adjustable articulation on the mirrors, they can run flat and straight under the handlebar. Nevertheless you have a good view to the rear (better than in many other accessory mirrors which are mounted above the handlebars), because you don't have to look past your shoulders anymore, but only at your waist (but not as good as in the original ones, because they have very long mirror arms and therefore protrude far outwards).
You can either mount these mirrors on the original mirror mount on the crash bar or mount them without the crash bars. Please choose which version you want, because different mounting materials are included.
Included in the delivery is a mirrorless motogadget mirror with E-number (see below for exact mirror description) and a new CNC milled mirror adapter (for the version without crash bar), or a black screw and a black cap nut (for the version with crash bars).There are 3 different versions to choose from for the mirrors.
Version WITHOUT handguards: For the adapters are 2 different versions to choose from (Standard: simple black aluminum adapters / CNC-Milled: elaborate, CNC-milled adapters in matte black anodized with milled T - logo / The T is on the head of the underbar mirrors, which looks even better as a pure logo).Here you can find the CNC adapter, if you want to have more information about it. Photos of the two adapters you can also see under the pictures (you just have to change the version in the selection to see the different adapters).
You have to be careful when mounting the mirrors, because they have to be adjusted exactly, so that you have a view to the rear, but the mirror does not reach the tank when you turn the handlebars. (Mounting instructions included).
To the mirrorless mirrors:These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The Classic mirror only works with the version without support bracket.
Underbar Mirror Kit Triumph Bonneville
CB12289.1M / -1
From
€135.00*
Motgadget Underbar mirror kit suitable for Triumph T100 - T120 with original handlebars (as well as some accessories handlebars). With E-number / road legal
This mirror kit provide a really flat & cool line above the handlebar, because with these mirrors there is nothing more. An extremely cool style, as the mirrors are hardly noticeable. Because by the adjustable articulated joint on the mirrors, these can run nice and flat and straight under the handlebars. Nevertheless, you have a good view to the rear (better than in many other accessory mirrors that are mounted above the handlebars), because you no longer have to look at the shoulders, but only at the waist past (although not as good as in the original, because these have very long mirror arms and thus seh far out).
Included is a mirrorless Motogadget mirror with E-number (exactly mirror description see below) as well as a black screw and a black cap nut to be able to mount the mirror (standing down) on the original mount.
When mounting the mirrors you have to be a little careful, because they have to be adjusted to fit exactly, so that you have visibility to the rear, but the mirror does not come to the tank when turning the handlebars. (Assembly note is supplied).
About the mirrorless mirrors:These new and beautiful Motogadget mirrors have a whole new mirror technology! They come completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is incorporated directly on the metal of the body. The aluminum itself is the mirror surface! This allows for a weightless design with no rim or frame, and the mirror body itself becomes extremely thin and light. Broken glass or glass that falls out is simply not possible! A new mirror design, which is looking for its equal on the market, but will not find! These mirrors are really an absolute highlight on any motorcycle!
Please select the version (there are 3 different mirrors to choose from).
Mirror thread Screws / covers
CB11684M / 5
From
€11.95*
A PAAR aluminium screw in black anodized for the original mirror threads.Exactly the right one for everyone who has converted his motorcycle to handlebar end mirrors and would like to have the original mirror threads.Even more recommendable are the clamps, which remove the original mirror thread completely (see accessories in this description).
Motogadget M.View Road Mirror
CB11623 / 0
€99.00*
Motogadget M.View Road handlebar ends mirror in a sporty classic oval design(road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 114 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View Sport 130 Mirror
CB11624 / 0
€129.00*
Motogadget M.View Sport 130 handlebar ends mirror in a sporty angular design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View - Classic 130 Mirror
CB11625 / 0
€99.00*
Motogadget M.View Classic 130 handlebar ends mirror in classic round design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view Classic 130 corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View Spy Mirror
CB11626 / 0
€99.00*
Motogadget M.View Spy handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
Motogadget M.View Bar Adapter handlebar extension
CB11627 / 1
€59.00*
A pair of Motogadget handlebar extensions that allow all Motogadget M.View handlebar end mirrors to be mounted on the handlebars without having to move the fittings further inwards. Furthermore, the adapters in combination with the Motogadget bar end mirrors offer a perfect handlebar end (see photos).The adapter creates a clamping surface for the handlebar end mirror outside of the steering tube. Suitable for all Motogaadget bar end mirrors (see accessories in this description).The adapters are simply pushed into the handlebars (handlebars must be hollow from the inside, which is not the case with most original handlebars).
Fits all handlebars with 22 mm, 7/8 and 1 inch with a free inner diameter of 12 to 21 mmTotal length: approx. 45 mm, at least 30 mm free inner tube length requiredwidth of the clamping surface for mirrors: 8 mm, fits all m.view handlebar end mirrors diameter of the clamping surface: 1 inch, fits all m.view handlebar end mirrors
Motogadget M.View Sport Mirror
CB11630M / 0
From
€129.00*
Motogadget M.View Sport mirror (street legal!) in a sporty angular design, as the name already says. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw M10 x 1.25 left-hand thread) to mount the mirror on any bike that has a mirror thread.
The mirrors are available in 2 different variants. There is the standard and the XL variant. These differ only in the length of the mirror arm. Visually, of course, the shorter arm looks better, but on some motorcycles, the mirror mount sits so far inside on the fittings that you have with the standard version no good view to the rear.Dimensions of the play arms you see below in the details and on a photo.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without mirror thread (such as a Triumph Bonneville T100), you will find in the category "Mirrors: Accessories, holders & adapters" suitable adapters for your motorcycle. If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This allows you to mount the mirrors up and down on the handlebars.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).In addition, we recommend that you choose the XL mirror variant for these models, since the mirror hole in the dashboard is located quite far inside and you do not have a perfect view to the rear with the short mirror.
DimensionsWidth of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: standard: 150 mm / XL: 180mm
The size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for all vehicles without registration.Price per piece.
Motogadget M.View Club Mirror
CB11631M / 0
From
€99.00*
Motogadget M.View Club mirror (street legal!) in a classic oval design. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw M10 x 1.25 left-hand thread) to mount the mirror on any bike that has a mirror thread.
The mirrors are available in 2 different variants. There is the standard and the XL variant. These differ only in the length of the mirror arm. Visually, of course, the shorter arm looks better, but on some motorcycles, the mirror mount sits so far inside on the fittings that you have with the standard version no good view to the rear.Dimensions of the play arms you see below in the details and on a photo.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without mirror thread (such as a Triumph Bonneville T100), you will find in the category "Mirrors: Accessories, holders & adapters" suitable adapters for your motorcycle. If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This allows you to mount the mirrors up and down on the handlebars.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).In addition, we recommend that you choose the XL mirror variant for these models, since the mirror hole in the dashboard is located quite far inside and you do not have a perfect view to the rear with the short mirror.
DimensionsWidth of mirror body: 114 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: standard: 150 mm / XL: 180mm
The size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for all vehicles without registration.Price per piece.
Motogadget M.View Classic Mirror
CB11632M / 0
From
€99.00*
Motogadget M.View Classic Mirror (street legal!) i classic round design paired with latest and most modern technology. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw M10 x 1.25 left-hand thread) to mount the mirror on any bike that has a mirror thread.
The mirrors are available in 2 different variants. There is the standard and the XL variant. These differ only in the length of the mirror arm. Visually, of course, the shorter arm looks better, but on some motorcycles the mirror mount sits so far inside on the fittings that you have with the standard version no good view to the rear.Dimensions of the game arms you see below in the details and on a photo.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without mirror thread (such as a Triumph Bonneville T100), you will find in the category "Mirrors: Accessories, holders & adapters" suitable adapters for your motorcycle. If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This allows you to mount the mirrors up and down on the handlebars.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).In addition, we recommend that you choose the XL mirror variant for these models, since the mirror hole in the dashboard is located quite far inside and you do not have a perfect view to the rear with the short mirror.
DimensionsDiameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmMirror arm length: 150 mmThe size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for all vehicles without registration.Price per piece.
Motogadget M.View Bar Clamp Mirror Adapter
CB11633 / 0
€29.00*
The M.View Bar Clamp mirror adapters allow the mounting of all mirrors with M10 x 1.25 thread (this is the standard thread for accessory mirrors) on motorcycles without a mirror thread in the fittings. Or for customizers who want to give their handlebars a clean look and want to replace the original shots-Perfectly suitable are the beautiful M.View mirrors from our program (see accessories in this description). With these adapters the mirrors can be mounted both upwards and downwards (if there is enough space for the tank).The m.view bar clamp is delivered as a single piece. It fits perfectly to our handles m.grip, the handlebar end indicator m.blaze disc as well as the push button fittings m.switch and m.switch mini. The assembly takes place directly on the handlebar tube (22 mm, 7/8 and 1 inch).For two mirrors please order 2 m.view bar clamps.
Motogadget M.View Race Mirror
CB11678M / 0
From
€129.00*
Motogadget M.View Race mirror (street legal with ECE!) in an angular design for all who like it sporty towards racers, as the name already says. Suitable for any normal mirror mount with thread. In the scope of supply different threads are contained (1x screw M10x1,5, 1x screw M10x1,25 right thread, 1x screw M10x1,25 left thread), in order to be able to mount the mirror also at each Bike, which has a mirror thread.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without a mirror thread (like e.g. a Triumph Bonneville T100), you will find suitable adapters for your motorcycle in the category "Mirrors: Accessories, holders & adapters". If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This makes it possible to mount the mirrors on the handlebars both upwards and downwards.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).
DimensionsWidth of mirror body: 129 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: 150 mmWeight: 175 gThe size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE mark. Therefore it is suitable for all vehicles without registration.Price per piece.
Motogadget M.View Blade Mirror - FLIP
CB11680 / 1
€129.00*
Motogadget M.View Blade FLIP handlebar ends. The top sporty in tiny design (such a small and filigree mirror, in which you can still see quite well, we never had in our program) for 22 mm & 1" handlebars.
The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally.
These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.Dimensions:Width of mirror body: 100 mmHeight of mirror body: 60 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmWeight: 94 gThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.Translated with www.DeepL.com/Translator
Motogadget M.View Sport 60
CB11835 / 0
€129.00*
Motogadget M.View Sport handlebar end mirror WITH E-number. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.
Dimensions:Width of mirror body: 122 mm Height of mirror body: 83 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 128 g
The size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles. Price per piece.
Motogadget M.View Cruise Mirror
CB11836 / 0
€99.00*
Motogadget M.View Cruise handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.
Dimensions:Width of mirror body: 114 mm Height of mirror body: 80 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 125 g
Price per piece.
Motogadget M.View Street Mirror
CB11837 / 0
€99.00*
Motogadget M.View Street handlebar end mirror with E-number in classic, round design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a brand new mirror technology! They come completely without mirror glass. The special thing about this mirror is the patented mirror surface, which is directly on the metal of the body. The aluminium itself is the mirror surface! This allows a weightless design without edge and frame and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted either upright or down on the handlebars (fits left & right). The mirror arm is also swiveling, which makes it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror clamps are made in the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge-free transitions when you mount everything
Dimensions:Diameter of mirror body: 96 mm Thickness of mirror body without ball head: 4.2 mm length of the mirror arm: 60 mm diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 10 mm Weight: 125 g
Price per unit.
Motogadget M.View Street Mirror - FLIP
CB12443 / 1
€159.00*
Motogadget M.View Street FLIP handlebar end mirror with E-number in classic, round design. Fits all 22mm & 1" handlebars.
The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally.
These new and beautiful Motogadget mirrors have a brand new mirror technology! They come completely without mirror glass. The special thing about this mirror is the patented mirror surface, which is directly on the metal of the body. The aluminium itself is the mirror surface! This allows a weightless design without edge and frame and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted either upright or down on the handlebars (fits left & right). The mirror arm is also swiveling, which makes it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror clamps are made in the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge-free transitions when you mount everything
Dimensions:Diameter of mirror body: 96 mm Thickness of mirror body without ball head: 4.2 mm length of the mirror arm: 60 mm diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 10 mm Weight: 125 g
Price per unit.
Motogadget M.View Pace Mirror - FLIP
CB12444 / 1
€159.00*
Motogadget M.View Pace handlebar end mirror WITH E-number. Fits all 22mm & 1" handlebars.
The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally.
These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.
Dimensions:Width of mirror body: 122 mm Height of mirror body: 83 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 128 g
The size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles. Price per piece.
Motogadget M.View Cruise Mirror - FLIP
CB12445 / 1
€129.00*
Motogadget M.View Cruise FLIP handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars.
The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally.
These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.
Dimensions:Width of mirror body: 114 mm Height of mirror body: 80 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 125 g
Price per piece.
Motogadget M.View Spy Mirror - FLIP
CB12446 / 1
€129.00*
Motogadget M.View Spy FLIP handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.
The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
Motogadget M.View Blade Mirror
CB12543 / 0
€99.00*
Motogadget M.View Blade handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view blade does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
Fitting clamp without mirror thread 22mm
CB11510 / 12
€22.90*
This clamp replaces the original clamp on the clutch and brake side, which has an integrated thread for the mirror. Fits all models with 22 mm handlebars.
Air-cooled models: Scrambler, Bonneville cast bike & Thruxton carburettor
Water-cooled models: Street Twin, Street Scrambler, Speed Twin, Scrambler 1200.
This makes sense if you convert the bikes to handlebar end mirrors, otherwise you're looking at the open thread.
We also have a bracket for the brake fluid reservoir in our range if it is no longer to be held by the mirror thread (see accessories in this description).
Rizoma One Mirror LC
CB11339 / 0
€157.00*
Rizoma One Mirror With E-number. The mirror is made of very high quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milling structure. You can see and see at a glance the high quality of these mirrors. The One Mirror is the classic from the Rizoma range. He impresses you with his absolutely californian and round shape with a nice filigree arm.
For the StreetTwin the adapter "Riz mirror adapter One BMW & StreetT" is required.
The price is for a mirror.
Rizoma Radial RS Mirror Triumph LC
CB11340M / 0
From
€169.00*
Rizoma Radial RS Mirror for the water cooled Triumph Modern Classic models . With E-number.
The mirror is made of very high quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milling structure. One notices and sees at first sight the high quality of these mirrors. Due to the ingenious mounting system that Rizoma uses here, the mirror does not stand so high up and does not look like mouse tubes. The mirror is nicely flat above the handlebar. The shape is a classic drop shape.
An additional, model-specific adapter is required to mount the mirror (see accessories in this description).
In order to mount the mirror on a SpeedTwin or Thruxton, a new handlebar clamp is required, as these bikes do not have a mirror thread in the fittings as standard (see accessories in this description).The price is for one mirror.
Rizoma Dynamic Mirror LC
CB11341.1M / 0
From
€95.00*
Rizoma Dynamic mirror in minimalist design . The mirror is made of very high quality billet aluminum in a 3D process. Who knows the brand and the parts of Rizoma, knows the high quality of the mirrors. Due to the ingenious fastening system the Rizoma uses here, the mirror does not stand as far up and becomes like mouse tubes. It runs smoothly over the handlebar. The mirror is beautifully small in a retro style. Due to the additional flat mounting the mirror falls only minimally.
An additional, model-specific adapter is required to mount the mirror (see accessories in this description).
In order to mount the mirror on a SpeedTwin or Thruxton, a new handlebar clamp is required, as these bikes do not have a mirror thread in the fittings as standard (see accessories in this description).
The price is for a mirror.
Rizoma handlebar weight for mirror
CB11310M / 9
From
€59.00*
High quality and noble handlebar weight of Rizoma. The weights are either black or sillber anodized. It is available with a plastic end cap or without (the black cap does not only add a color accent, but this is individually interchangeable, if you get scratches on a wall or so). The weights fit into any high-end accessory handlebar from 22mm to 1 "since different adapters are included in the scope.
The handlebars are also suitable for attaching / clamping some Rizoma handlebar mirrors.
For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).
Rizoma Cap Handlebar endweight
CB11312.1M / 0
From
€48.00*
This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro
The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope.
For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).