Chassis Lifting Kit - Bobber
€579.00*
% €639.00* (9.39% saved)
Zubehörartikel
€139.00*
€199.95*
€299.95*
| item number: | CBR-LC-KIT-0169 |
| Product number: | CB12847 |
Product information "Chassis Lifting Kit - Bobber"
Lifting kit for your Triumph Bobber – 4 cm more ground clearance for the footrests
Who hasn't experienced this? With the Triumph Bobber, the footrests hit the ground far too early. The rider and machine could do more – but the footrests are in the way.
With our Lifting Kit, this problem is a thing of the past. Your Bobber gets noticeably more lean angle and can finally be ridden sportily without the footrests constantly touching the asphalt.
What is included in the kit?
- CNC-milled high footrests
- Lift kit for the rear shock absorber
- Lift kit for the front fork
All parts have been developed by Classicbike-Raisch and are of the highest quality. In addition to the improved functionality, the set also enhances the look of your bobber.
Installation & scope of delivery
- All necessary installation materials and detailed instructions are included.
- Installation time: approx. 3 hours – easily achievable by experienced mechanics.
Installation tips for raising the forks:- Classicbike-Raisch recommendation:
Order our plastic tool to fit the milled caps without scratches or blemishes (see accessories). - Note on the original forks:
- To remove the original fork caps, the fork bridge usually has to be removed.
- With our special plastic socket, this can be done without dismantling the fork bridge – saving time and effort!
- Not everyone has a 36 mm socket in their toolbox – we have the solution.
- Classicbike-Raisch recommendation:
Additional information
The individual parts of the kit can also be found in the accessories in this product description. If you would like more details on the individual components, you can take a look at the respective product descriptions.
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
|
|---|
3
3
3
3
There aren't any asked questions yet.
Zubehörartikel
New
Fork lift – Bobber / SpeedM
CB12846
/ RS4
€139.00*
Fork lift kit (+2 cm) & Triumph milled fork caps for Triumph Bobber & Speedmaster
Are you looking for a way to raise the forks on your Bobber a little? Here is the solution!
With our CNC-milled Triumph fork caps, you can easily raise the forks of your Bobber or Speedmaster by about 2 cm. The original fork caps are replaced by the new ones, allowing the forks to be pushed further down for more ground clearance at an angle. A real advantage if your footrests hit the ground way too early!In addition, the black Triumph milled design of the caps gives your forks a much more elegant look.
Kit benefits:
Raises the forks by approx. 2 cm for more ground clearance
Improves lean angle – later resting contact points
High-quality CNC-milled optics in Triumph milled design
gives the triple clamp area a more elegant look
Even more lean angle freedom & performance?
If you want even more lean angle freedom and better suspension performance, then take a look at our suspension lift kit. It includes several components to optimize lean angle freedom and can be found among the accessories for this product description.
Installation tips:
Classicbike-Raisch recommendation:Order our plastic tool to avoid scratching or denting the milled caps when mounting them (see accessories).
Note on the original fork:
To remove the original fork caps, the fork bridge usually has to be removed.
With our special plastic socket, this can be done without removing the fork bridge – saving time and effort!
Not everyone has a 36 mm socket in their toolbox – we have the solution.
Important note for Speedmaster models:This kit is only suitable for Speedmaster models with a 47 mm fork.
Suspension Lift Kit
CB12658
/ RS10
€199.95*
Suspension lift for all Triumph Bobber & Speedmaster 1200 models
Are you tired of your Bobber touching down on every corner?
We know the feeling only too well: you're on a beautiful, winding road or want to whizz through an empty roundabout, and bang – your bike touches down. Sure, the Bobber is a super agile bike, but the low ground clearance makes life difficult for us, doesn't it?
We have the solution for you!
That's why we developed a suspension lift for the Triumph Bobber and Speedmaster. With our Race-Bobber, we wanted to be able to take corners and roundabouts more freely, without constantly having to think about touching down. Now you can finally move your machine the way it deserves!
The lift is simply mounted in place of the original strut – uncomplicated and effective.
Your advantages at a glance:
30 mm higher footrestsMore ground clearance means fewer worries at angles. Your Bobber or Speedmaster will touch down much later.
35 mm higher seatThis ensures a more dynamic driving experience and more control.
Easy assembly
With the included assembly instructions and a little technical understanding, the installation can be done in 1 to 1.5 hours. You don't need a professional workshop – you can do it yourself!
Our recommendation: get the suspension in tip-top shape!
If you want to get even more out of your bobber, we recommend that you also upgrade the suspension. With a new shock absorber and a fork cartridge, you are perfectly equipped for more riding fun and safety – even when riding in a sporty style. You can find the matching parts directly from us in the accessories section.
Want even more ground clearance?
No problem! We also have our CNC-milled aluminum high footrests, which give you up to 4cm more ground clearance at the footpegs.You can find the footrests among the accessories below this description.
High footrests - Bobber
CB12829
/ RS-1
€299.95*
High footrests for your Triumph Bobber – More lean angle and a classy look
More ground clearance
Do the original footrests on your Triumph Bobber hit the ground too quickly when cornering? Us too! That's why we have designed the solution: Our raised CNC-milled aluminum footrests. They were specially developed for all Triumph Bobber models and offer you 2 cm more ground clearance. If you include the original footrests, you even gain almost 4 cm. This means you can finally ride at the angle you want – without constantly spraying sparks.
High-quality design meets functionality
These footrests are not only a technical upgrade, but also a real eye-catcher. Their minimalist design ensures a classy look that enhances your bobber. Unlike many other manufacturers, our footrests consist of a single component / the footrests are milled from a single block of aluminum. No adapter, no frills – just pure precision.
After CNC milling, the footrests are glass bead blasted and then anodized in a deep black color. The result: a high-quality, slightly matte black pearl surface that is not only durable but also perfectly matches the aesthetics of your bobber.
Perfect grip for every ride
The finely crafted serrated design of the footrests not only looks really good, it also ensures a secure hold – whether on the road or when cornering at speed.
Want even more ground clearance?
If the additional 2 cm is not enough for you, you can optimize your Bobber even further with our lift kit. Just take a look at the accessory products below this product description and get the full upgrade.