€0.00*

License plate holder Short - Street / Speed / Scram

€89.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
€17.95*
€10.90*
from €65.00*
€8.90*
Product number: CB12561
item number: 211257735
Product information "License plate holder Short - Street / Speed / Scram"

Short licence plate holder for Triumph Street Twin / Cup / Scrambler - Speed Twin 900 / Scrambler 900 made of 3mm stainless steel and black powder coated.
ATTENTION: The set is without indicator holder, these must be ordered separately (see accessories in this description).

The perfect and most minimalist licence plate for the original mudguard of your Triumph.
We have made the licence plate holder extra small in the new version so that the licence plate holder can be used for any country in the world.
Dimensions (height x width): 100mm x 160mm

The licence plate holder does not have indicator brackets. These must be ordered separately (see accessories in this description).

There are three different indicator holders to choose from:
1: The vario indicator holder. These can be adjusted in width to ensure the correct spacing for each licence plate with each indicator.
2: The 3-1 indicator/rear light combination kit is installed. The original rear light is replaced by indicators with integrated rear and brake lights. (this variant is only available for Street Twin / Speed Twin 900)


The holder replaces the ugly and much too long original plastic licence plate holder and the licence plate light.

Scope of delivery:
- Mounting material
- Licence plate holder
- LED licence plate light
- Detailed step-by-step fitting instructions

 

 

The license plate light disappears deep into the fender and is barely visible. This brings the license plate nice and close to the mudguard.
The vario blinker holders (which we recommend ordering as well) are attached directly to the license plate holder and can be moved inwards and outwards.
This allows the indicators to sit discreetly to the left & right of the license plate. The prescribed minimum distance is maintained with all indicators.
The original Triumph indicators can NOT be reused.

No ABE, certificate or similar is required for our short licence plate holder. It complies with the StvO & does not have to be registered. In other words, simply install it and you are still legally on the road.
To ride completely legally, a reflector must of course be fitted again. You can either use the original one (which we do not recommend as it is very large) or you can order the small reflector from our range (see accessories in this description).
We also offer an optional licence plate screw set (see accessories article) so that the annoying licence plate can be fitted as discreetly as possible.
When designing the bracket, we have taken great care to ensure that it does not come into contact with the rear wheel even at maximum deflection, which is not the case with all brackets on the market.

Triumph LC models from 2016:
  • Scrambler 1200 XC
  • Scrambler 1200 XE
Triumph LC ab 2016
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Turn signal holder - Vario
Turn signal holder - Vario CB12380 / RS0
A pair of Vario turn signal holders that are adjustable in width for all license plate sizes. The Vario turn signal holders are suitable for some Classicbike-Raisch license plate holders as accessories (all matching license plate holders to which the turn signal holders fit are assigned to the accessories articles of this article). The holders are through their fixing nose, twist safe to install. The practical thing about the holders is that they are variable in width to move (see photos). So you can use them on the one hand for all license plate sizes and on the other hand you can adjust the holder for each turn signal perfectly. The Vario holders are included screws, stop nuts and washers.

€17.95*
Reflector
Reflector CB00080 / RS600
Reflector with holder. Ugly but mandatory. Only for the TUEV demonstration.

€10.90*
Triumph Tail light replacement for 3-1 indicator
Triumph Tail light replacement for 3-1 indicator CB12101.3M / RS600
This Triumph taillight replacement for the for various Triumph models allows to dismantle the original taillight and 3-1 turn signals (turn signals with integrated taillight to install). To get a nice solution (as on the product images), the Raisch turn signal adapter is needed (you can order below the description simply in the set to. This then allows all accessories 3-1 turn signals with M8 thread to mount.In addition, we also recommend the cable set for easier wiring to order (Attention for the Speed Twin Euro 5 models there is no cable set, these models must be wired manually). Matching turn signals to the set you can order with 10% discount, below the description in the set. Our recommendation for this set are the turn signals of the brand Rizoma, which fit perfectly. Tip Scrambler / Speed Twin 1200: To get a really cool and clean tail on these models, we recommend a short license plate holder to order (see accessories below the description). The aluminum plate with the Triumph emblem is supplied in silver.

From €65.00*
Details
License plate holder Short - Street / Speed / Scram
License plate holder Short - Street / Speed / Scram CB12561 / RS0
Short licence plate holder for Triumph Street Twin / Cup / Scrambler - Speed Twin 900 / Scrambler 900 made of 3mm stainless steel and black powder coated.ATTENTION: The set is without indicator holder, these must be ordered separately (see accessories in this description). The perfect and most minimalist licence plate for the original mudguard of your Triumph.We have made the licence plate holder extra small in the new version so that the licence plate holder can be used for any country in the world.Dimensions (height x width): 100mm x 160mm The licence plate holder does not have indicator brackets. These must be ordered separately (see accessories in this description). There are three different indicator holders to choose from: 1: The vario indicator holder. These can be adjusted in width to ensure the correct spacing for each licence plate with each indicator.2: The 3-1 indicator/rear light combination kit is installed. The original rear light is replaced by indicators with integrated rear and brake lights. (this variant is only available for Street Twin / Speed Twin 900) The holder replaces the ugly and much too long original plastic licence plate holder and the licence plate light. Scope of delivery: - Mounting material- Licence plate holder- LED licence plate light - Detailed step-by-step fitting instructions     The license plate light disappears deep into the fender and is barely visible. This brings the license plate nice and close to the mudguard.The vario blinker holders (which we recommend ordering as well) are attached directly to the license plate holder and can be moved inwards and outwards.This allows the indicators to sit discreetly to the left & right of the license plate. The prescribed minimum distance is maintained with all indicators.The original Triumph indicators can NOT be reused. No ABE, certificate or similar is required for our short licence plate holder. It complies with the StvO & does not have to be registered. In other words, simply install it and you are still legally on the road. To ride completely legally, a reflector must of course be fitted again. You can either use the original one (which we do not recommend as it is very large) or you can order the small reflector from our range (see accessories in this description).We also offer an optional licence plate screw set (see accessories article) so that the annoying licence plate can be fitted as discreetly as possible.When designing the bracket, we have taken great care to ensure that it does not come into contact with the rear wheel even at maximum deflection, which is not the case with all brackets on the market.

€89.95*
License plate screw set
License plate screw set CB11444 / RS0
These screws are powder coated in the matching colors (white / blue / black) for the license plate. We have our stainless steel screws powdered in Germany. This allows us to guarantee a high quality. The tool still fits, even the color does not burst. Delivery: 1x screw M5x20 blue 2x screw M5x20 black 3x screw M5x20 white 4x self-locking nut M5 4x washer M5 DIN9021 The advantages of powder-coated screws: - Mechanically resilient - Corrosion resistant - Weather resistant - Environmentally friendly

€8.90*