RxV Rear Kit - Bobber
€929.00*
Available, delivery time: 1-3 days
Zubehörartikel
€579.00*
€19.90*
€219.00*
€114.95*
€349.00*
€239.90*
€289.00*
€429.95*
| Product number: | CB12790.1 |
| item number: | CBR-LC-KIT-153.RAW |
Product information "RxV Rear Kit - Bobber"
RxV rear kit for Triumph Bobber – exclusive at Classicbike-Raisch
The RxV rear kit stands for the highest design excellence and was developed in close collaboration between Classicbike-Raisch and the renowned motorcycle design company Vagabund Moto. Two years ago, the extraordinary RxV Bobber was created from this collaboration, which caused a worldwide sensation with its unmistakable look. Now you have the opportunity to bring this iconic style to your own Triumph Bobber – with the exclusive RxV rear kit, which is an absolute eye-catcher, especially in combination with the matching RxV headlight fairing.
Turn your Triumph Bobber into a custom bike!
The 3D-printed RxV rear end takes your Triumph Bobber to a whole new level. With the integrated LED rear light, perfectly incorporated into the minimalist design of the rear, your Bobber becomes a unique custom bike that is guaranteed to turn heads on the road.
High-quality materials for the best quality:
- 3D printing technology: The rear consists of precisely manufactured plastic parts that have been produced using the latest 3D printing technology, making it robust and durable.
- Steel construction: The steel receiver allows for easy mounting on the original mounting points of your bobber's seat. In addition, the steel seat base plate provides stability and allows you to customize the seat.
- Seat cushion and cover: The rear end is delivered without a seat cushion and cover so that you can customize the seat design to your own preferences. Visit your favorite saddler or ask us about our professional cover-fitting service.
- Paintwork: The rear consists of three 3D printed plastic parts. You can order these either in RAW (unpainted) or in black gloss/matt. The black parts are painted to customer order and have an approximate delivery time of 4-8 weeks.
LED rear light – stylish and functional:
The integrated LED rear light (incl. e-number) ensures clear visibility and perfectly matches the clean, open design of the rear. Please note that the position of the rear light in the EU does not officially meet the prescribed standard, as it is more than 30 cm from the rear wheel. In practice, however, this is not a problem because the rear light is highly visible due to the open design of the bobber.
Installation instructions:
- Turn signals: For installing the turn signals, we recommend our Frame Blinker Holder or Frame Flasher. Both products can be found in the accessories.
- License plate: We recommend a side license plate holder for the perfect custom look. Suitable models can also be found in the accessories.
- Fender: For the perfect custom look, we recommend mounting a short fender or no fender at all. You can find two different short fenders among our accessory products.
- Wiring: To be able to easily plug the rear light and new turn signals into the wiring harness plug of your bobber, we recommend that you also order the cable set.
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
|
|---|
10
10
10
10
There aren't any asked questions yet.
Zubehörartikel
RxV headlight kit - Bobber
CB12789.3
/ RS10
€579.00*
Colour:
Raw
RxV “Raisch x Vagabund” headlight fairing incl. LED spotlight for Triumph Bobber – turn your Bobber into a real head-turner!
If you want to give your Triumph Bobber a completely new and exclusive look, there is no way around the RxV headlight fairing including LED headlights. This unmistakable design piece was developed by the renowned motorcycle design company Vagabund Moto in collaboration with Classicbike-Raisch – and the result is more than just another component: it is a real statement.
The RxV headlight kit is the centerpiece of our exclusive RxV Bobber project, which was developed in collaboration with Vagabund Moto. This special Bobber has attracted a lot of attention due to its design elements such as the striking headlight fairing and the unique rear conversion. Both components, the headlight mask and the RxV rear end, are available to buy exclusively from Classicbike-Raisch – so you can give your own Triumph Bobber the unmistakable RxV look.
Your Bobber, redefined:
Exclusive design from Vagabund Moto: the perfectly designed headlight fairing gives your Bobber a sophisticated and modern look It is a highlight for anyone who wants to stand out from the crowd with their bobber.
Complemented by the RxV rear: The completely redesigned rear end, which you can also find exclusively from us, rounds off the overall design. This design duo – headlight and rear – transforms your Triumph Bobber into a real custom bike.
Premium materials and perfect fit: Each part has been 3D printed with the highest precision to seamlessly fit your Bobber and ensure easy installation.
Paintwork: The headlight mask is available either in RAW (unpainted) or in gloss/matt black (the painted parts are made to order and have a rough delivery time of 4-8 weeks
Easy installation – all materials included:The headlight kit comes with all the necessary brackets and mounting materials.For bobber models with a standard LED headlight, we recommend the optional cable set for a plug-and-play installation without any cutting or soldering. You can find this add-on in the accessories section of our shop.
Optics tip from Classicbike-Raisch:Do you want to perfect the clean look of your bobber? Combine the RxV lamp mask with a smallMotogadget speedometer that makes the front of your bobber look even more minimalist and elegant. Of course, you can also find this high-quality speedometer in our shop!
Indicator Brackets Bobber Frame
CB12172
/ RS3
€19.90*
The turn signal holder Frame for Bobber & Bobber Black allow the mounting of all turn signals with M8 thread on the inside of the frame on your Bobber.
Visually, the turn signals are here as good as no longer noticeable, if you use nice small. From behind they are nevertheless very well visible, since they are higher than the rear wheel & the fender. In the pictures 3-1 turn signals are installed which combine tail light, brake light & turn signal in one. We then did not install a central tail light on the Bobber. This makes for an extremely tidy tail.
Included with, are 2 black plastic caps that are pushed over the nuts of the turn signals so that they do not stand out.
The holders are made of aluminum and then black powder coated.
Frame Flasher Bobber
CB12617
/ RS5
€219.00*
Plug & play indicator/tail light combination, specially developed and manufactured for the Triumph Bobber. Very bright thanks to modern SMD LED technology.Made in Germany.
The set is fully wired and no soldering or crimping work is required for installation. We deliver the indicator/rear light set already wired so that it can simply be connected plug & play to the original plug connection behind the battery of the Bobber.
We have also integrated a cable for the license plate light into our blinker wiring harness and fitted it with a socket. The cable for the license plate light was deliberately left long so that it can be routed to the axle mount. So it's up to you which side license plate holder you choose.
This kit has been specially developed for short mudguards, such as the short version from KRT (see accessories article in this product description).We have chosen the position of the indicators to be as inconspicuous as possible, but made sure that they are clearly visible during operation. Unfortunately, this position does not comply with the road traffic regulations (StVO) and may not officially be used in road traffic, as the indicators are too far away from the end of the rear wheel (however, a 100% clear and very good view of the 3-1 indicators is given, which is why we have no safety concerns with this kit).Even though the indicators have an E-mark, the short mudguard leaves little room for maneuver when positioning the indicators.
Sideway licens plate support Swingarm LC
CB11838
/ RS1
€114.95*
Side license plate holder including LED license plate light.Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases.
Without expert opinion. From our experience, however, there are no problems with the green ones.
Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm
Tips for complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard
New blinker brackets must also be fitted if the original mudguard is removed.
The accessories described can all be found under accessories in this product description.
Licensplate Holder site ways CNC
CB11182
/ RS2
€349.00*
Design:
DE Kennzeichen
This is how it should look on a real bobber! On a bobber, the license plate simply belongs on the side and not on the fender.
The side license plate holder from Wunderkind also fits the Triumph Bonneville T100 / T120 - Street Twin / Scrambler / Cup - Scrambler 900 - Speed Twin 900
The holder is very elegantly CNC-milled and black anodized. There is an optional holder for all those who want to continue using the original rear light of their Bobber & a reflector fits on the Kz holder (see accessories in this description).
Details at a glance+ Laterally mountable license plate holder+ 3-stage width adjustment of the plate (towards or away from the wheel) + Possibility to tilt the plate by 30+ Integrated LED lighting + License plate can be inserted into the frame from above + Concealed cable routing + Surface finish with BLACKPearl anodized + CNC-milled aluminium+ Design: WUNDERKIND-Custom
The bracket is supplied with a parts certificate for the Triumph Bobber & Speedmaster.For all other models (Bonneville / Street / Scrambler / Speed) it must be registered individually (which is not a problem due to the existing parts certificate).ATTENTION for Bonneville models: On these models, the NCIHT holder fits together with the original exhaust.
The license plate is optionally available for German (standard and 200x220 size), Austrian, Swiss and French license plates.
Side license plate holder - rear wheel
CB12774
/ RS5
€239.90*
The side license plate holder from Motone is a legal and registration-free option for mounting your license plate on a side license plate holder centered behind the rear wheel. A very practical solution for motorcycles that have a very short rear end and can't find a good place to mount the license plate and the turn signals or 3-1 turn signal / rear light combination. In addition to the license plate holder, you can also order turn signal holders (see accessories below this description). With this solution, you can easily get your lighting and license plate in a legal position (no entry in the TÜV required).
This is a very good solution for bobber conversions with a short fender.
A small LED license plate light (street legal with E-number) is included with the license plate holder.
This is equipped with a long cable to be able to lead it along the swing arm to the motorcycle's wiring harness.
Race Bobber rear mudguard
CB12622
/ RS0
€289.00*
Colour:
Raw
Shorty Slim rear wheel fender for Triumph Bobber.Probably the narrowest and sportiest fender available for bobbers. Known from our Race Bobber conversions, on which we install the fender.
The fender is just right for you if you want to give your Bobber a slightly sporty touch or even convert it to racing tires (as shown in the product pictures). The short and narrow line offers a very clear view of the rear tire.On the one hand, this provides minimal splash protection (shock absorber, battery, airbox and electrical components are fully protected) and on the other, a short, sporty mudguard looks even better than none at all.
The mudguard mounting system allows you to position the mudguard individually. This is because the distance between the fender and tire is freely adjustable.
Especially if you are aiming for a sporty look, the mudguard should be positioned close to the tire. This adjustment can easily be made on the suspension system of our fender.
The mudguard can also be optimally adjusted when using different tire types. Note, however, that a tire expands at high speeds. Therefore, a minimum clearance of 7 mm should be set.
For an even more minimalist look, the mounting point for the original chain guard can be removed. You can remove this if you want to use our short chain guard or even ride without it at all.
Like all KRT Framework parts, this mudguard is manufactured by Marvin (KRT) himself. From the prototype to the mold production to the finished carbon part, all work steps are carried out in-house. Our mudguards are manufactured using the RTM process, whereby the carbon fiber is impregnated with resin under vacuum and heat. This process enables extremely light and precisely fitting components. The fibers and resins used for production meet current aviation standards and are also used in the construction of rotor blades.
Versions and their surfaces:
The mudguard is available in a visible carbon version, for which we use a carbon canvas fabric that is also used by Ducati and Porsche. On request, owners of a Bobber TFC can obtain a special version in which we use a twill weave. The matt finish visually matches the original carbon parts of the TFC. However, as the TFC is limited, this part is only produced on request.
We also offer two ready-painted versions:
one in gloss black and one in matt black. Both match the original colors. For those looking for individual color options, an unpainted RAW version is available. This is primed and optimally prepared for an individual paint job by your painter.
Matching accessories:
To build a complete rear kit around the short mudguard, other accessories such as license plate holder, indicators / rear light, short chain guard and a matching front mudguard are also available.You can find our product recommendations for the short mudguard under the accessories in this product description.
Rialto Bobber rear fender
CB12427
/ RS0
€429.95*
The Rialto steel fender is a short steel rear fender for the Triumph Bobber models. The fender comes ready painted in gloss black.
The fender is suitable for all Bobber models. The fender is significantly shorter than the original and gives your Bobber a tidy rear area and a freer rear wheel. However, it is still long enough to provide good splash protection.
Classicbike-Raisch recommends when converting to the short fender to install 3-1 tail light / turn signal and a side license plate holder. You will find suitable turn signal holders and license plate holders under the accessories in this description.
The fender comes plug & play with all mounts (also for the chain guard) for the original mounts.
Wiring harness accessories taillight & turn signal - LC
CB11222.2
/ RS600
€49.95*
Model:
Bobber / Bobber Black / SpeedM.
This cable set fits into the original wiring harness with the plug. The open cable ends only need to be connected with blinkers or rear lights from our program (soldering or crimping). Then just heat the shrink tube, heat it up with the lighter, and the professional electrical connection is ready.
Variants from €31.95*